2 Documentation BGP performance of ingesting from many iBGP peers, data change counter NOT used.
4 ... Copyright (c) 2015 Cisco Systems, Inc. and others. All rights reserved.
6 ... This program and the accompanying materials are made available under the
7 ... terms of the Eclipse Public License v1.0 which accompanies this distribution,
8 ... and is available at http://www.eclipse.org/legal/epl-v10.html
11 ... This suite uses play.py processes as iBGP peers.
12 ... This is analogue of single peer performance suite, which uses many peers.
13 ... Each peer is of ibgp type, and they contribute to the same example-bgp-rib,
14 ... and thus to the same single example-ipv4-topology.
15 ... The suite only looks at example-ipv4-topology, so RIB is not examined.
17 ... The suite consists of two halves, differing on which side initiates BGP connection.
18 ... State of "work is being done" is detected by increasing value of prefixes in topology.
19 ... The time for Wait_For_Stable_* cases to finish is the main performance metric.
20 ... After waiting for stability is done, full check on number of prefixes present is performed.
22 ... TODO: Currently, if a bug causes prefix count to remain at zero,
23 ... affected test cases will wait for max time. Reconsider.
24 ... If zero is allowed as stable, higher period or repetitions would be required.
26 ... The prefix counting is quite heavyweight and may induce large variation in time.
27 ... Try the other version of the suite (manypeers_changecount.robot) to get better precision.
29 ... ODL distinguishes peers by their IP addresses.
30 ... Currently, this suite requires python utils to be started on ODL System,
31 ... to guarantee IP address block is available for them to bind to.
32 ... TODO: Figure out how to use Docker and docker IP pool available in RelEng.
34 ... Currently, 127.0.0.1 is hardcoded as the first peer address to use.
35 ... TODO: Figure out how to make it configurable.
36 ... As peer IP adresses are set incrementally, we need ipaddr to be used in Robot somehow.
38 ... Brief description how to configure BGP peer can be found here:
39 ... https://wiki.opendaylight.org/view/BGP_LS_PCEP:User_Guide#BGP_Peer
40 ... http://docs.opendaylight.org/en/stable-boron/user-guide/bgp-user-guide.html#bgp-peering
42 ... TODO: Is there a need for version of this suite where ODL connects to pers?
43 ... Note that configuring ODL is slow, which may affect measured performance singificantly.
44 ... Advanced TODO: Give manager ability to start pushing on trigger long after connections are established.
45 Suite Setup Setup_Everything
46 Suite Teardown Teardown_Everything
47 Test Setup SetupUtils.Setup_Test_With_Logging_And_Fast_Failing
48 Test Teardown SetupUtils.Teardown_Test_Show_Bugs_And_Start_Fast_Failing_If_Test_Failed
50 Library RequestsLibrary
51 Library SSHLibrary timeout=10s
52 Resource ../../../libraries/BGPSpeaker.robot
53 Resource ../../../libraries/FailFast.robot
54 Resource ../../../libraries/KarafKeywords.robot
55 Resource ../../../libraries/KillPythonTool.robot
56 Resource ../../../libraries/PrefixCounting.robot
57 Resource ../../../libraries/SetupUtils.robot
58 Resource ../../../libraries/SSHKeywords.robot
59 Resource ../../../libraries/TemplatedRequests.robot
60 Resource ../../../libraries/Utils.robot
61 Resource ../../../variables/Variables.robot
64 ${BGP_TOOL_LOG_LEVEL} info
65 ${BGP_VARIABLES_FOLDER} ${CURDIR}/../../../variables/bgpuser/
66 ${CHECK_PERIOD} 60 # ${MULTIPLICITY*2} recommended for this suite, but keeping the common default.
67 ${CHECK_PERIOD_PREFIX_COUNT} ${CHECK_PERIOD}
68 ${CHECK_PERIOD_PREFIX_COUNT_MANY} ${CHECK_PERIOD_PREFIX_COUNT}
70 ${COUNT_PREFIX_COUNT} ${COUNT}
71 ${COUNT_PREFIX_COUNT_MANY} ${COUNT_PREFIX_COUNT}
72 ${FIRST_PEER_IP} 127.0.0.1
74 ${HOLDTIME_PREFIX_COUNT} ${HOLDTIME}
75 ${HOLDTIME_PREFIX_COUNT_MANY} ${HOLDTIME_PREFIX_COUNT}
76 ${KARAF_LOG_LEVEL} INFO
77 ${KARAF_BGPCEP_LOG_LEVEL} ${KARAF_LOG_LEVEL}
78 ${KARAF_PROTOCOL_LOG_LEVEL} ${KARAF_BGPCEP_LOG_LEVEL}
79 ${MULTIPLICITY} 2 # Changed in releng-builder variables
80 ${MULTIPLICITY_PREFIX_COUNT} ${MULTIPLICITY}
81 ${MULTIPLICITY_PREFIX_COUNT_MANY} ${MULTIPLICITY_PREFIX_COUNT}
83 ${REPETITIONS_PREFIX_COUNT} ${REPETITIONS}
84 ${REPETITIONS_PREFIX_COUNT_MANY} ${REPETITIONS_PREFIX_COUNT}
85 ${TEST_DURATION_MULTIPLIER} 1
86 ${TEST_DURATION_MULTIPLIER_PREFIX_COUNT} ${TEST_DURATION_MULTIPLIER}
87 ${TEST_DURATION_MULTIPLIER_PREFIX_COUNT_MANY} ${TEST_DURATION_MULTIPLIER_PREFIX_COUNT}
88 ${RIB_INSTANCE} example-bgp-rib
89 ${PROTOCOL_OPENCONFIG} ${RIB_INSTANCE}
90 ${DEVICE_NAME} controller-config
91 # TODO: Option names can be better.
94 Check_For_Empty_Ipv4_Topology_Before_Talking
95 [Documentation] Wait for example-ipv4-topology to come up and empty. Give large timeout for case when BGP boots slower than restconf.
97 # TODO: Choose which tags to assign and make sure they are assigned correctly.
98 BuiltIn.Wait_Until_Keyword_Succeeds 120s 1s PrefixCounting.Check_Ipv4_Topology_Is_Empty
100 Reconfigure_ODL_To_Accept_Connections
101 [Documentation] Configure BGP peer modules with initiate-connection set to false.
102 : FOR ${index} IN RANGE 1 ${MULTIPLICITY_PREFIX_COUNT_MANY}+1
103 \ ${peer_name} = BuiltIn.Set_Variable example-bgp-peer-${index}
104 \ ${peer_ip} = BuiltIn.Evaluate str(ipaddr.IPAddress('${FIRST_PEER_IP}') + ${index} - 1) modules=ipaddr
105 \ &{mapping} Create Dictionary DEVICE_NAME=${DEVICE_NAME} BGP_NAME=${peer_name} IP=${peer_ip} HOLDTIME=${HOLDTIME_PREFIX_COUNT_MANY}
106 \ ... PEER_PORT=${BGP_TOOL_PORT} INITIATE=false BGP_RIB=${RIB_INSTANCE} PASSIVE_MODE=true BGP_RIB_OPENCONFIG=${PROTOCOL_OPENCONFIG}
107 \ ... RIB_INSTANCE_NAME=${RIB_INSTANCE}
108 \ TemplatedRequests.Put_As_Xml_Templated ${BGP_VARIABLES_FOLDER}${/}bgp_peer mapping=${mapping}
109 # FIXME: Add testcase to change bgpcep and protocol log levels, when a Keyword that does it without messing with current connection is ready.
111 Change_Karaf_Logging_Levels
112 [Documentation] We may want to set more verbose logging here after configuration is done.
113 KarafKeywords.Set_Bgpcep_Log_Levels bgpcep_level=${KARAF_BGPCEP_LOG_LEVEL} protocol_level=${KARAF_PROTOCOL_LOG_LEVEL}
115 Start_Talking_BGP_Manager
116 [Documentation] Start Python manager to connect speakers to ODL.
117 # Myport value is needed for checking whether connection at precise port was established.
118 BGPSpeaker.Start_BGP_Manager --amount=${COUNT_PREFIX_COUNT_MANY} --multiplicity=${MULTIPLICITY_PREFIX_COUNT_MANY} --myip=${FIRST_PEER_IP} --myport=${BGP_TOOL_PORT} --peerip=${ODL_SYSTEM_IP} --peerport=${ODL_BGP_PORT}
120 Wait_For_Stable_Talking_Ipv4_Topology
121 [Documentation] Wait until example-ipv4-topology becomes stable. This is done by checking stability of prefix count.
122 PrefixCounting.Wait_For_Ipv4_Topology_Prefixes_To_Become_Stable timeout=${bgp_filling_timeout} period=${CHECK_PERIOD_PREFIX_COUNT_MANY} repetitions=${REPETITIONS_PREFIX_COUNT_MANY} excluded_count=0
124 Check_Talking_Ipv4_Topology_Count
125 [Documentation] Count the routes in example-ipv4-topology and fail if the count is not correct.
127 [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
128 PrefixCounting.Check_Ipv4_Topology_Count ${COUNT_PREFIX_COUNT_MANY}
130 Kill_Talking_BGP_Speakers
131 [Documentation] Abort the Python speakers. Also, attempt to stop failing fast.
132 [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
133 BGPSpeaker.Kill_BGP_Speaker
134 FailFast.Do_Not_Fail_Fast_From_Now_On
135 # NOTE: It is still possible to remain failing fast, if both previous and this test have failed.
136 [Teardown] SetupUtils.Teardown_Test_Show_Bugs_If_Test_Failed
138 Wait_For_Stable_Ipv4_Topology_After_Talking
139 [Documentation] Wait until example-ipv4-topology becomes stable again.
141 # TODO: Is is possible to have failed at Check_Talking_Ipv4_Topology_Count and still have initial period of constant count?
142 # FIXME: If yes, do count here to get the initial value and use it (if nonzero).
143 # TODO: If yes, decide whether access to the FailFast state should have keyword or just variable name.
144 PrefixCounting.Wait_For_Ipv4_Topology_Prefixes_To_Become_Stable timeout=${bgp_filling_timeout} period=${CHECK_PERIOD_PREFIX_COUNT_MANY} repetitions=${REPETITIONS_PREFIX_COUNT_MANY} excluded_count=${COUNT_PREFIX_COUNT_MANY}
146 Check_For_Empty_Ipv4_Topology_After_Talking
147 [Documentation] Example-ipv4-topology should be empty now.
149 [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
150 PrefixCounting.Check_Ipv4_Topology_Is_Empty
152 Restore_Karaf_Logging_Levels
153 [Documentation] Set logging on bgpcep and protocol to the global value.
154 KarafKeywords.Set_Bgpcep_Log_Levels bgpcep_level=${KARAF_LOG_LEVEL} protocol_level=${KARAF_LOG_LEVEL}
156 Delete_Bgp_Peer_Configuration
157 [Documentation] Revert the BGP configuration to the original state: without any configured peers.
158 [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
159 # TODO: Is it useful to extract peer naming logic to separate Keyword?
160 : FOR ${index} IN RANGE 1 ${MULTIPLICITY_PREFIX_COUNT_MANY}+1
161 \ ${peer_name} = BuiltIn.Set_Variable example-bgp-peer-${index}
162 \ ${peer_ip} = BuiltIn.Evaluate str(ipaddr.IPAddress('${FIRST_PEER_IP}') + ${index} - 1) modules=ipaddr
163 \ &{mapping} BuiltIn.Create_Dictionary DEVICE_NAME=${DEVICE_NAME} BGP_NAME=${peer_name} IP=${peer_ip} BGP_RIB_OPENCONFIG=${PROTOCOL_OPENCONFIG}
164 \ TemplatedRequests.Delete_Templated ${BGP_VARIABLES_FOLDER}${/}bgp_peer mapping=${mapping}
168 [Documentation] Setup imported resources, SSH-login to ODL system,
169 ... create HTTP session, put Python tool to ODL system.
170 SetupUtils.Setup_Utils_For_Setup_And_Teardown
171 TemplatedRequests.Create_Default_Session
172 PrefixCounting.PC_Setup
173 RequestsLibrary.Create_Session operational http://${ODL_SYSTEM_IP}:${RESTCONFPORT} auth=${AUTH} timeout=125 max_retries=0
174 # TODO: Do not include slash in ${OPERATIONAL_TOPO_API}, having it typed here is more readable.
175 # TODO: Alternatively, create variable in Variables which starts with http.
176 # Both TODOs would probably need to update every suite relying on current Variables.
177 SSHLibrary.Set_Default_Configuration prompt=${ODL_SYSTEM_PROMPT}
178 SSHLibrary.Open_Connection ${ODL_SYSTEM_IP}
179 SSHKeywords.Flexible_Controller_Login
180 SSHKeywords.Require_Python
181 SSHKeywords.Assure_Library_Ipaddr target_dir=.
182 SSHLibrary.Put_File ${CURDIR}/../../../../tools/fastbgp/play.py
183 # Calculate the timeout value based on how many routes are going to be pushed.
184 ${period} = DateTime.Convert_Time ${CHECK_PERIOD_PREFIX_COUNT_MANY} result_format=number
185 ${timeout} = BuiltIn.Evaluate ${TEST_DURATION_MULTIPLIER_PREFIX_COUNT_MANY} * (${COUNT_PREFIX_COUNT_MANY} * 3.0 / 10000 + ${period} * (${REPETITIONS_PREFIX_COUNT_MANY} + 1)) + 20
186 Builtin.Set_Suite_Variable ${bgp_filling_timeout} ${timeout}
187 ${timeout} = BuiltIn.Evaluate ${TEST_DURATION_MULTIPLIER_PREFIX_COUNT_MANY} * (${COUNT_PREFIX_COUNT_MANY} * 2.0 / 10000 + ${period} * (${REPETITIONS_PREFIX_COUNT_MANY} + 1)) + 20
188 Builtin.Set_Suite_Variable ${bgp_emptying_timeout} ${timeout}
189 KarafKeywords.Execute_Controller_Karaf_Command_On_Background log:set ${KARAF_LOG_LEVEL}
192 [Documentation] Make sure Python tool was killed and tear down imported Resources.
193 # Environment issue may have dropped the SSH connection, but we do not want Teardown to fail.
194 BuiltIn.Run_Keyword_And_Ignore_Error KillPythonTool.Search_And_Kill_Remote_Python 'play\.py'
195 BuiltIn.Run_Keyword_And_Ignore_Error Utils.Get_Sysstat_Statistics
196 RequestsLibrary.Delete_All_Sessions
197 SSHLibrary.Close_All_Connections