2 Documentation BGP performance of ingesting from 1 iBGP peer, data change counter is NOT used.
4 ... Copyright (c) 2015 Cisco Systems, Inc. and others. All rights reserved.
6 ... This program and the accompanying materials are made available under the
7 ... terms of the Eclipse Public License v1.0 which accompanies this distribution,
8 ... and is available at http://www.eclipse.org/legal/epl-v10.html
11 ... This suite uses play.py as single iBGP peer.
12 ... The suite only looks at example-ipv4-topology, so RIB is not examined.
14 ... The suite consists of two halves, differing on which side initiates BGP connection.
15 ... State of "work is being done" is detected by increasing value of prefixes in topology.
16 ... The time for Wait_For_Stable_* cases to finish is the main performance metric.
17 ... After waiting for stability is done, full check on number of prefixes present is performed.
19 ... Brief description how to configure BGP peer can be found here:
20 ... https://wiki.opendaylight.org/view/BGP_LS_PCEP:User_Guide#BGP_Peer
21 ... http://docs.opendaylight.org/en/stable-boron/user-guide/bgp-user-guide.html#bgp-peering
23 ... TODO: Currently, if a bug causes prefix count to remain at zero,
24 ... affected test cases will wait for max time. Reconsider.
25 ... If zero is allowed as stable, higher period or repetitions would be required.
27 ... The prefix counting is quite heavyweight and may induce large variation in time.
28 ... Try the other version of the suite (singlepeer_changecount.robot) to get better precision.
29 Suite Setup Setup_Everything
30 Suite Teardown Teardown_Everything
31 Test Setup SetupUtils.Setup_Test_With_Logging_And_Fast_Failing
32 Test Teardown SetupUtils.Teardown_Test_Show_Bugs_And_Start_Fast_Failing_If_Test_Failed
33 Library SSHLibrary timeout=10s
34 Library RequestsLibrary
35 Resource ${CURDIR}/../../../variables/Variables.robot
36 Resource ${CURDIR}/../../../libraries/BGPSpeaker.robot
37 Resource ${CURDIR}/../../../libraries/FailFast.robot
38 Resource ${CURDIR}/../../../libraries/KillPythonTool.robot
39 Resource ${CURDIR}/../../../libraries/PrefixCounting.robot
40 Resource ${CURDIR}/../../../libraries/SetupUtils.robot
41 Resource ${CURDIR}/../../../libraries/SSHKeywords.robot
42 Resource ${CURDIR}/../../../libraries/TemplatedRequests.robot
45 ${BGP_TOOL_LOG_LEVEL} info
46 ${BGP_VARIABLES_FOLDER} ${CURDIR}/../../../variables/bgpuser/
48 ${CHECK_PERIOD_PREFIX_COUNT} ${CHECK_PERIOD}
49 ${CHECK_PERIOD_PREFIX_COUNT_SINGLE} ${CHECK_PERIOD_PREFIX_COUNT}
51 ${COUNT_PREFIX_COUNT} ${COUNT}
52 ${COUNT_PREFIX_COUNT_SINGLE} ${COUNT_PREFIX_COUNT}
54 ${HOLDTIME_PREFIX_COUNT} ${HOLDTIME}
55 ${HOLDTIME_PREFIX_COUNT_SINGLE} ${HOLDTIME_PREFIX_COUNT}
57 ${KARAF_LOG_LEVEL} INFO
58 ${KARAF_BGPCEP_LOG_LEVEL} ${KARAF_LOG_LEVEL}
59 ${KARAF_PROTOCOL_LOG_LEVEL} ${KARAF_BGPCEP_LOG_LEVEL}
62 ${REPETITIONS_PREFIX_COUNT} ${REPETITIONS}
63 ${REPETITIONS_PREFIX_COUNT_SINGLE} ${REPETITIONS_PREFIX_COUNT}
64 ${RESULTS_FILE_NAME} bgp.csv
65 ${TEST_DURATION_MULTIPLIER} 1
66 ${TEST_DURATION_MULTIPLIER_PREFIX_COUNT} ${TEST_DURATION_MULTIPLIER}
67 ${TEST_DURATION_MULTIPLIER_PREFIX_COUNT_SINGLE} ${TEST_DURATION_MULTIPLIER_PREFIX_COUNT}
70 ${RIB_INSTANCE} example-bgp-rib
71 ${PROTOCOL_OPENCONFIG} ${RIB_INSTANCE}
72 ${DEVICE_NAME} controller-config
73 ${BGP_PEER_NAME} example-bgp-peer
74 # TODO: Option names can be better.
77 Check_For_Empty_Ipv4_Topology_Before_Talking
78 [Documentation] Wait for example-ipv4-topology to come up and empty. Give large timeout for case when BGP boots slower than restconf.
80 # TODO: Choose which tags to assign and make sure they are assigned correctly.
81 BuiltIn.Wait_Until_Keyword_Succeeds 120s 1s PrefixCounting.Check_Ipv4_Topology_Is_Empty
83 Reconfigure_ODL_To_Accept_Connection
84 [Documentation] Configure BGP peer module with initiate-connection set to false.
85 &{mapping} Create Dictionary DEVICE_NAME=${DEVICE_NAME} BGP_NAME=${BGP_PEER_NAME} IP=${TOOLS_SYSTEM_IP} HOLDTIME=${HOLDTIME_PREFIX_COUNT_SINGLE} PEER_PORT=${BGP_TOOL_PORT}
86 ... INITIATE=false BGP_RIB=${RIB_INSTANCE} PASSIVE_MODE=true BGP_RIB_OPENCONFIG=${PROTOCOL_OPENCONFIG} RIB_INSTANCE_NAME=${RIB_INSTANCE}
87 TemplatedRequests.Put_As_Xml_Templated ${BGP_VARIABLES_FOLDER}${/}bgp_peer mapping=${mapping}
89 Change_Karaf_Logging_Levels
90 [Documentation] We may want to set more verbose logging here after configuration is done.
91 KarafKeywords.Set_Bgpcep_Log_Levels bgpcep_level=${KARAF_BGPCEP_LOG_LEVEL} protocol_level=${KARAF_PROTOCOL_LOG_LEVEL}
93 Start_Talking_BGP_Speaker
94 [Documentation] Start Python speaker to connect to ODL.
95 # Myport value is needed for checking whether connection at precise port was established.
96 BGPSpeaker.Start_BGP_Speaker --amount ${COUNT_PREFIX_COUNT_SINGLE} --myip=${TOOLS_SYSTEM_IP} --myport=${BGP_TOOL_PORT} --peerip=${ODL_SYSTEM_IP} --peerport=${ODL_BGP_PORT} --insert=${INSERT} --withdraw=${WITHDRAW} --prefill ${PREFILL} --update ${UPDATE} --${BGP_TOOL_LOG_LEVEL} --results ${RESULTS_FILE_NAME}
98 Wait_For_Stable_Talking_Ipv4_Topology
99 [Documentation] Wait until example-ipv4-topology becomes stable. This is done by checking stability of prefix count.
100 PrefixCounting.Wait_For_Ipv4_Topology_Prefixes_To_Become_Stable timeout=${bgp_filling_timeout} period=${CHECK_PERIOD_PREFIX_COUNT_SINGLE} repetitions=${REPETITIONS_PREFIX_COUNT_SINGLE} excluded_count=0
102 Check_Talking_Ipv4_Topology_Count
103 [Documentation] Count the routes in example-ipv4-topology and fail if the count is not correct.
105 [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
106 PrefixCounting.Check_Ipv4_Topology_Count ${COUNT_PREFIX_COUNT_SINGLE}
108 Kill_Talking_BGP_Speaker
109 [Documentation] Abort the Python speaker. Also, attempt to stop failing fast.
111 [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
112 BGPSpeaker.Kill_BGP_Speaker
113 FailFast.Do_Not_Fail_Fast_From_Now_On
114 # NOTE: It is still possible to remain failing fast, if both previous and this test have failed.
115 [Teardown] SetupUtils.Teardown_Test_Show_Bugs_If_Test_Failed
117 Store_Results_For_Talking_BGP_Speaker
118 [Documentation] Store results for plotting
119 [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
120 Store_File_To_Workspace totals-${RESULTS_FILE_NAME} totals-${RESULTS_FILE_NAME}
121 Store_File_To_Workspace performance-${RESULTS_FILE_NAME} performance-${RESULTS_FILE_NAME}
122 Store_File_To_Workspace totals-${RESULTS_FILE_NAME} prefixcount-talking-totals-${RESULTS_FILE_NAME}
123 Store_File_To_Workspace performance-${RESULTS_FILE_NAME} prefixcount-talking-performance-${RESULTS_FILE_NAME}
125 Wait_For_Stable_Ipv4_Topology_After_Talking
126 [Documentation] Wait until example-ipv4-topology becomes stable again.
128 # TODO: Is is possible to have failed at Check_Talking_Ipv4_Topology_Count and still have initial period of constant count?
129 # FIXME: If yes, do count here to get the initial value and use it (if nonzero).
130 # TODO: If yes, decide whether access to the FailFast state should have keyword or just variable name.
131 PrefixCounting.Wait_For_Ipv4_Topology_Prefixes_To_Become_Stable timeout=${bgp_filling_timeout} period=${CHECK_PERIOD_PREFIX_COUNT_SINGLE} repetitions=${REPETITIONS_PREFIX_COUNT_SINGLE} excluded_count=${COUNT_PREFIX_COUNT_SINGLE}
133 Check_For_Empty_Ipv4_Topology_After_Talking
134 [Documentation] Example-ipv4-topology should be empty now.
136 [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
137 PrefixCounting.Check_Ipv4_Topology_Is_Empty
139 Start_Listening_BGP_Speaker
140 [Documentation] Start Python speaker in listening mode.
141 BGPSpeaker.Start_BGP_Speaker --amount ${COUNT_PREFIX_COUNT_SINGLE} --listen --myip=${TOOLS_SYSTEM_IP} --myport=${BGP_TOOL_PORT} --peerip=${ODL_SYSTEM_IP} --insert=${INSERT} --withdraw=${WITHDRAW} --prefill ${PREFILL} --update ${UPDATE} --${BGP_TOOL_LOG_LEVEL} --results ${RESULTS_FILE_NAME}
143 Reconfigure_ODL_To_Initiate_Connection
144 [Documentation] Replace BGP peer config module, now with initiate-connection set to true.
145 &{mapping} Create Dictionary DEVICE_NAME=${DEVICE_NAME} BGP_NAME=${BGP_PEER_NAME} IP=${TOOLS_SYSTEM_IP} HOLDTIME=${HOLDTIME_PREFIX_COUNT_SINGLE} PEER_PORT=${BGP_TOOL_PORT}
146 ... INITIATE=true BGP_RIB=${RIB_INSTANCE} PASSIVE_MODE=false BGP_RIB_OPENCONFIG=${PROTOCOL_OPENCONFIG} RIB_INSTANCE_NAME=${RIB_INSTANCE}
147 TemplatedRequests.Put_As_Xml_Templated ${BGP_VARIABLES_FOLDER}${/}bgp_peer mapping=${mapping}
149 Wait_For_Stable_Listening_Ipv4_Topology
150 [Documentation] Wait until example-ipv4-topology becomes stable.
151 PrefixCounting.Wait_For_Ipv4_Topology_Prefixes_To_Become_Stable timeout=${bgp_filling_timeout} period=${CHECK_PERIOD_PREFIX_COUNT_SINGLE} repetitions=${REPETITIONS_PREFIX_COUNT_SINGLE} excluded_count=0
153 Check_Listening_Ipv4_Topology_Count
154 [Documentation] Count the routes in example-ipv4-topology and fail if the count is not correct.
156 [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
157 PrefixCounting.Check_Ipv4_Topology_Count ${COUNT_PREFIX_COUNT_SINGLE}
159 Kill_Listening_BGP_Speaker
160 [Documentation] Abort the Python speaker. Also, attempt to stop failing fast.
162 [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
163 BGPSpeaker.Kill_BGP_Speaker
164 FailFast.Do_Not_Fail_Fast_From_Now_On
165 # NOTE: It is still possible to remain failing fast, if both previous and this test have failed.
166 [Teardown] SetupUtils.Teardown_Test_Show_Bugs_If_Test_Failed
168 Store_Results_For_Listening_BGP_Speaker
169 [Documentation] Store results for plotting
170 [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
171 Store_File_To_Workspace totals-${RESULTS_FILE_NAME} totals-${RESULTS_FILE_NAME}
172 Store_File_To_Workspace performance-${RESULTS_FILE_NAME} performance-${RESULTS_FILE_NAME}
173 Store_File_To_Workspace totals-${RESULTS_FILE_NAME} prefixcount-listening-totals-${RESULTS_FILE_NAME}
174 Store_File_To_Workspace performance-${RESULTS_FILE_NAME} prefixcount-listening-performance-${RESULTS_FILE_NAME}
176 Wait_For_Stable_Ipv4_Topology_After_Listening
177 [Documentation] Wait until example-ipv4-topology becomes stable again.
179 PrefixCounting.Wait_For_Ipv4_Topology_Prefixes_To_Become_Stable timeout=${bgp_filling_timeout} period=${CHECK_PERIOD_PREFIX_COUNT_SINGLE} repetitions=${REPETITIONS_PREFIX_COUNT_SINGLE} excluded_count=${COUNT_PREFIX_COUNT_SINGLE}
181 Check_For_Empty_Ipv4_Topology_After_Listening
182 [Documentation] Example-ipv4-topology should be empty now.
184 [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
185 PrefixCounting.Check_Ipv4_Topology_Is_Empty
187 Restore_Karaf_Logging_Levels
188 [Documentation] Set logging on bgpcep and protocol to the global value.
189 KarafKeywords.Set_Bgpcep_Log_Levels bgpcep_level=${KARAF_LOG_LEVEL} protocol_level=${KARAF_LOG_LEVEL}
191 Delete_Bgp_Peer_Configuration
192 [Documentation] Revert the BGP configuration to the original state: without any configured peers.
193 [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
194 &{mapping} BuiltIn.Create_Dictionary DEVICE_NAME=${DEVICE_NAME} BGP_NAME=${BGP_PEER_NAME} IP=${TOOLS_SYSTEM_IP} BGP_RIB_OPENCONFIG=${PROTOCOL_OPENCONFIG}
195 TemplatedRequests.Delete_Templated ${BGP_VARIABLES_FOLDER}${/}bgp_peer mapping=${mapping}
199 [Documentation] Setup imported resources, SSH-login to tools system,
200 ... create HTTP session, put Python tool to tools system.
201 SetupUtils.Setup_Utils_For_Setup_And_Teardown
202 TemplatedRequests.Create_Default_Session
203 PrefixCounting.PC_Setup
204 RequestsLibrary.Create_Session operational http://${ODL_SYSTEM_IP}:${RESTCONFPORT} auth=${AUTH} timeout=125 max_retries=0
205 # TODO: Do not include slash in ${OPERATIONAL_TOPO_API}, having it typed here is more readable.
206 # TODO: Alternatively, create variable in Variables which starts with http.
207 # Both TODOs would probably need to update every suite relying on current Variables.
208 SSHLibrary.Set_Default_Configuration prompt=${TOOLS_SYSTEM_PROMPT}
209 SSHLibrary.Open_Connection ${TOOLS_SYSTEM_IP}
210 SSHKeywords.Flexible_Mininet_Login
211 SSHKeywords.Require_Python
212 SSHKeywords.Assure_Library_Ipaddr target_dir=.
213 SSHLibrary.Put_File ${CURDIR}/../../../../tools/fastbgp/play.py
214 # Calculate the timeout value based on how many routes are going to be pushed
215 # TODO: Replace 20 with some formula from period and repetitions.
216 ${timeout} = BuiltIn.Evaluate ${TEST_DURATION_MULTIPLIER_PREFIX_COUNT_SINGLE} * (${COUNT_PREFIX_COUNT_SINGLE} * 9.0 / 10000 + 20)
217 Builtin.Set_Suite_Variable ${bgp_filling_timeout} ${timeout}
218 KarafKeywords.Execute_Controller_Karaf_Command_On_Background log:set ${KARAF_LOG_LEVEL}
221 [Documentation] Make sure Python tool was killed and tear down imported Resources.
222 # Environment issue may have dropped the SSH connection, but we do not want Teardown to fail.
223 BuiltIn.Run_Keyword_And_Ignore_Error KillPythonTool.Search_And_Kill_Remote_Python 'play\.py'
224 RequestsLibrary.Delete_All_Sessions
225 SSHLibrary.Close_All_Connections
227 Store_File_To_Workspace
228 [Arguments] ${src_file_name} ${dst_file_name}
229 [Documentation] Store the provided file from the SSH client to workspace.
230 ${files}= SSHLibrary.List Files In Directory .
231 ${output_log}= SSHLibrary.Execute_Command cat ${src_file_name}
232 BuiltIn.Log ${output_log}
233 Create File ${dst_file_name} ${output_log}