Merge "move network id to local jenkins configuration managed files"
[releng/builder.git] / docs / jenkins.rst
1 Jenkins
2 =======
3
4 The `Release Engineering Project <releng-wiki_>`_ consolidates the Jenkins jobs from
5 project-specific VMs to a single Jenkins server. Each OpenDaylight project
6 has a tab for their jobs on the `jenkins-master`_. The system utilizes
7 `Jenkins Job Builder <jjb-docs_>`_ for the creation and management of the
8 Jenkins jobs.
9
10 Sections:
11
12 .. contents::
13    :depth: 3
14    :local:
15
16 New Project Quick Start
17 -----------------------
18
19 This section attempts to provide details on how to get going as a new project
20 quickly with minimal steps. The rest of the guide should be read and understood
21 by those who need to create and contribute new job types that is not already
22 covered by the existing job templates provided by OpenDaylight's JJB repo.
23
24 As a new project you will be mainly interested in getting your jobs to appear
25 in the jenkins-master_ silo and this can be achieved by simply creating a
26 <project>.yaml in the releng/builder project's jjb directory.
27
28 .. code-block:: bash
29
30     git clone https://git.opendaylight.org/gerrit/releng/builder
31     cd builder
32     mkdir jjb/<new-project>
33
34 Where <new-project> should be the same name as your project's git repo in
35 Gerrit. So if your project is called "aaa" then create a new jjb/aaa directory.
36
37 Next we will create <new-project>.yaml as follows:
38
39 .. code-block:: yaml
40
41     - project:
42         name: <NEW_PROJECT>-carbon
43         jobs:
44             - '{project-name}-clm-{stream}'
45             - '{project-name}-integration-{stream}'
46             - '{project-name}-merge-{stream}'
47             - '{project-name}-verify-{stream}-{maven}-{jdks}'
48
49         project: '<NEW_PROJECT>'
50         project-name: '<NEW_PROJECT>'
51         stream: carbon
52         branch: 'master'
53         jdk: openjdk8
54         jdks:
55             - openjdk8
56         maven:
57             - mvn33:
58                 mvn-version: 'mvn33'
59         mvn-settings: '<NEW_PROJECT>-settings'
60         mvn-goals: 'clean install -Dmaven.repo.local=/tmp/r -Dorg.ops4j.pax.url.mvn.localRepository=/tmp/r'
61         mvn-opts: '-Xmx1024m -XX:MaxPermSize=256m'
62         dependencies: 'odlparent-merge-{stream},yangtools-merge-{stream},controller-merge-{stream}'
63         email-upstream: '[<NEW_PROJECT>] [odlparent] [yangtools] [controller]'
64         archive-artifacts: ''
65
66     - project:
67         name: <NEW_PROJECT>-sonar
68         jobs:
69             - '{project-name}-sonar'
70
71         project: '<NEW_PROJECT>'
72         project-name: '<NEW_PROJECT>'
73         branch: 'master'
74         mvn-settings: '<NEW_PROJECT>-settings'
75         mvn-goals: 'clean install -Dmaven.repo.local=/tmp/r -Dorg.ops4j.pax.url.mvn.localRepository=/tmp/r'
76         mvn-opts: '-Xmx1024m -XX:MaxPermSize=256m'
77
78 Replace all instances of <new-project> with the name of your project. This will
79 create the jobs with the default job types we recommend for Java projects. If
80 your project is participating in the simultanious-release and ultimately will
81 be included in the final distribution, it is required to add the following job
82 types into the job list for the release you are participating.
83
84
85 .. code-block:: yaml
86
87     - '{project-name}-distribution-check-{stream}'
88     - '{project-name}-validate-autorelease-{stream}'
89
90 If you'd like to explore the additional tweaking options available
91 please refer to the `Jenkins Job Templates`_ section.
92
93 Finally we need to push these files to Gerrit for review by the releng/builder
94 team to push your jobs to Jenkins.
95
96 .. code-block:: bash
97
98     git add jjb/<new-project>
99     git commit -sm "Add <new-project> jobs to Jenkins"
100     git review
101
102 This will push the jobs to Gerrit and your jobs will appear in Jenkins once the
103 releng/builder team has reviewed and merged your patch.
104
105 Jenkins Master
106 --------------
107
108 The `jenkins-master`_ is the home for all project's Jenkins jobs. All
109 maintenance and configuration of these jobs must be done via JJB through the
110 `releng-builder-repo`_. Project contributors can no longer edit the Jenkins jobs
111 directly on the server.
112
113 Build Minions
114 -------------
115
116 The Jenkins jobs are run on build minions (executors) which are created on an
117 as-needed basis. If no idle build minions are available a new VM is brought
118 up. This process can take up to 2 minutes. Once the build minion has finished a
119 job, it will be destroyed.
120
121 Our Jenkins master supports many types of dynamic build minions. If you are
122 creating custom jobs then you will need to have an idea of what type of minions
123 are available. The following are the current minion types and descriptions.
124 Minion Template Names are needed for jobs that take advantage of multiple
125 minions as they must be specifically called out by template name instead of
126 label.
127
128 Adding New Components to the Minions
129 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
130
131 If your project needs something added to one of the minions, you can help us
132 get things added faster by doing one of the following:
133
134 * Submit a patch to RelEng/Builder for the appropriate `jenkins-scripts`
135   definition which configure software during minion boot up.
136 * Submit a patch to RelEng/Builder for the `packer/provision` scripts that
137   configures software during minion instance imaging.
138 * Submit a patch to RelEng/Builder for the Packer's templates  in
139   the `packer/templates` directory that configures a new instance definition
140   along with changes in `packer/provision`.
141
142 Going the first route will be faster in the short term as we can inspect the
143 changes and make test modifications in the sandbox to verify that it works.
144
145 .. note::
146
147    The first route may add additional setup time considering this is run every
148    time the minion is booted.
149
150 The second and third routes, however, is better for the community as a whole as
151 it will allow others to utilize our Packer setups to replicate our systems more
152 closely. It is, however, more time consuming as an image snapshot needs to be
153 created based on the updated Packer definitions before it can be attached to the
154 Jenkins configuration on sandbox for validation testing.
155
156 In either case, the changes must be validated in the sandbox with tests to
157 make sure that we don't break current jobs and that the new software features
158 are operating as intended. Once this is done the changes will be merged and
159 the updates applied to the RelEng Jenkins production silo. Any changes to
160 files under `releng/builder/packer` will be validated and images would be built
161 triggered by verify-packer and merge-packer jobs.
162
163 Please note that the combination of a Packer definitions from `vars`, `templates`
164 and the `provision` scripts is what defines a given minion. For instance, a minion
165 may be defined as `centos7-java-builder` which is a combination of Packer OS image
166 definitions from `vars/centos.json`, Packer template definitions from
167 `templates/java-buidler.json` and spinup scripts from `provision/java-builder.sh`.
168 This combination provides the full definition of the realized minion.
169
170 Jenkins starts a minion using the latest image which is built and linked into the
171 Jenkins configuration. Once the base instance is online Jenkins checks out the
172 RelEng/Builder repo on it and executes two scripts. The first is
173 `provision/baseline.sh`, which is a baseline for all of the minions.
174
175 The second is the specialized script, which handles any system updates,
176 new software installs or extra environment tweaks that don't make sense in a
177 snapshot. Examples could include installing new package or setting up a virtual
178 environment. Its imperative to ensure modifications to these spinup scripts have
179 considered time taken to install the packages, as this could increase the build
180 time for every job which runs on the image. After all of these scripts have
181 executed Jenkins will finally attach the minion as an actual minion and start
182 handling jobs on it.
183
184 Pool: ODLRPC
185 ^^^^^^^^^^^^
186
187 .. raw:: html
188
189     <table class="table table-bordered">
190       <tr class="warning">
191         <td><b>Jenkins Labels</b><br/> centos7-java-builder-2c-4g,
192           centos7-java-builder-2c-8g, centos7-java-builder-4c-8g,
193           centos7-java-builder-8c-8g, centos7-java-builder-4c-16g</td>
194         <td><b>Minion Template names</b><br/> centos7-java-builder-2c-4g,
195           centos7-java-builder-2c-4g, centos7-java-builder-2c-8g,
196           centos7-java-builder-4c-8g, centos7-java-builder-8c-8g,
197           centos7-java-builder-4c-16g</td>
198         <td><b>Packer Template</b><br/>
199         releng/builder/packer/templates/java-builder.json</td>
200         <td><b>Spinup Script</b><br/>
201         releng/builder/jenkins-scripts/builder.sh</td>
202       </tr>
203       <tr>
204         <td colspan="4">
205           A CentOS 7 build minion. This system has OpenJDK 1.7 (Java7) and OpenJDK
206           1.8 (Java8) installed on it along with all the other components and
207           libraries needed for building any current OpenDaylight project. This is
208           the label that is used for all basic verify, merge and daily builds for
209           projects.
210         </td>
211       </tr>
212
213       <tr class="warning">
214         <td><b>Jenkins Labels</b><br/> centos7-robot-2c-2g</td>
215         <td><b>Minion Template names</b><br/> centos7-robot-2c-2g</td>
216         <td><b>Packer Template</b><br/>
217         releng/builder/packer/templates/robot.json</td>
218         <td><b>Spinup Script</b><br/> releng/builder/jenkins-scripts/robot.sh</td>
219       </tr>
220       <tr>
221         <td colspan="4">
222           A CentOS 7 minion that is configured with OpenJDK 1.7 (Java7), OpenJDK
223           1.8 (Java8) and all the current packages used by the integration
224           project for doing robot driven jobs. If you are executing robot
225           framework jobs then your job should be using this as the minion that
226           you are tied to. This image does not contain the needed libraries for
227           building components of OpenDaylight, only for executing robot tests.
228         </td>
229       </tr>
230
231       <tr class="warning">
232         <td><b>Jenkins Labels</b><br/> ubuntu_mininet, ubuntu-trusty-mininet-2c-2g</td>
233         <td><b>Minion Template names</b><br/> ubuntu-trusty-mininet-2c-2g</td>
234         <td><b>Packer Template</b><br/>
235         releng/builder/packer/teamplates/mininet.json</td>
236         <td><b>Spinup Script</b><br/> releng/builder/jenkins-scripts/mininet-ubuntu.sh</td>
237       </tr>
238       <tr>
239         <td colspan="4">
240           Basic Ubuntu system with ovs 2.0.2 and mininet 2.1.0
241         </td>
242       </tr>
243
244       <tr class="warning">
245         <td><b>Jenkins Labels</b><br/> ubuntu_mininet_ovs_23,
246           ubuntu-trusty-mininet-ovs-23-2c-2g</td>
247         <td><b>Minion Template names</b><br/> ubuntu-trusty-mininet-ovs-23-2c-2g</td>
248         <td><b>Packer Template</b><br/> releng/builder/packer/templates/mininet-ovs-2.3.json</td>
249         <td><b>Spinup Script</b><br/> releng/builder/jenkins-scripts/mininet-ubuntu.sh</td>
250       </tr>
251       <tr>
252         <td colspan="4">
253           Basic Ubuntu system with ovs 2.3 and mininet 2.2.1
254         </td>
255       </tr>
256
257       <tr class="warning">
258         <td><b>Jenkins Labels</b><br/> ubuntu_mininet_ovs_25,
259           ubuntu-trusty-mininet-ovs-25-2c-2g</td>
260         <td><b>Minion Template names</b><br/> ubuntu-trusty-mininet-ovs-25-2c-2g</td>
261         <td><b>Packer Template</b><br/> releng/builder/packer/templates/mininet-ovs-2.5.json</td>
262         <td><b>Spinup Script</b><br/> releng/builder/jenkins-scripts/mininet-ubuntu.sh</td>
263       </tr>
264       <tr>
265         <td colspan="4">
266           Basic Ubuntu system with ovs 2.5 and mininet 2.2.2
267         </td>
268       </tr>
269
270       <tr class="warning">
271         <td><b>Jenkins Labels</b><br/> centos7-devstack-2c-4g</td>
272         <td><b>Minion Template names</b><br/> centos7-devstack-2c-4g</td>
273         <td><b>Packer Template</b><br/> releng/builder/packer/templates/devstack.json</td>
274         <td><b>Spinup Script</b><br/> releng/builder/jenkins-scripts/devstack.sh</td>
275       </tr>
276       <tr>
277         <td colspan="4">
278           A CentOS 7 system purpose built for doing OpenStack testing using
279           DevStack. This minion is primarily targeted at the needs of the OVSDB
280           project. It has OpenJDK 1.7 (aka Java7) and OpenJDK 1.8 (Java8) and
281           other basic DevStack related bits installed.
282         </td>
283       </tr>
284
285       <tr class="warning">
286         <td><b>Jenkins Labels</b><br/> centos7-docker-2c-4g</td>
287         <td><b>Minion Template names</b><br/> centos7-docker-2c-4g</td>
288         <td><b>Packer Template</b><br/> releng/builder/packer/templates/docker.json</td>
289         <td><b>Spinup Script</b><br/> releng/builder/jenkins-scripts/docker.sh</td>
290       </tr>
291       <tr>
292         <td colspan="4">
293           A CentOS 7 system that is configured with OpenJDK 1.7 (aka Java7),
294           OpenJDK 1.8 (Java8) and Docker. This system was originally custom
295           built for the test needs of the OVSDB project but other projects have
296           expressed interest in using it.
297         </td>
298       </tr>
299
300       <tr class="warning">
301         <td><b>Jenkins Labels</b><br/> gbp_trusty, ubuntu-trusty-gbp-2c-2g</td>
302         <td><b>Minion Template names</b><br/> ubuntu-trusty-gbp-2c-2g</td>
303         <td><b>Packer Template</b><br/> releng/builder/packer/templates/gbp.json</td>
304         <td><b>Spinup Script</b><br/> releng/builder/jenkins-scripts/ubuntu-docker-ovs.sh</td>
305       </tr>
306       <tr>
307         <td colspan="4">
308           A basic Ubuntu node with latest OVS and docker installed. Used by Group Based Policy.
309         </td>
310       </tr>
311     </table>
312
313 Pool: ODLPUB - HOT (Heat Orchestration Templates)
314 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
315
316 HOT integration enables to spin up integration labs servers for CSIT jobs
317 using heat, rathar than using jclouds (deprecated). Image names are updated
318 on the project specific job templates using the variable
319 `{odl,docker,openstack,tools}_system_image` followed by image name in the
320 format `<platform> - <template> - <date-stamp>`.
321
322 .. code-block:: yaml
323
324     CentOS 7 - docker - 20161031-0802
325
326 .. include:: cloud-images.rst
327
328 Creating Jenkins Jobs
329 ---------------------
330
331 Jenkins Job Builder takes simple descriptions of Jenkins jobs in YAML format
332 and uses them to configure Jenkins.
333
334 * `Jenkins Job Builder (JJB) documentation <jjb-docs_>`_
335 * `RelEng/Builder Gerrit <releng-builder-gerrit_>`_
336 * `RelEng/Builder Git repository <releng-builder-repo_>`_
337
338 Getting Jenkins Job Builder
339 ---------------------------
340
341 OpenDaylight uses Jenkins Job Builder to translate our in-repo YAML job
342 configuration into job descriptions suitable for consumption by Jenkins.
343 When testing new Jenkins Jobs in the `Jenkins Sandbox`_, you'll
344 need to use the `jenkins-jobs` executable to translate a set of jobs into
345 their XML descriptions and upload them to the sandbox Jenkins server.
346
347 We document `installing <Installing Jenkins Job Builder_>`_ `jenkins-jobs`
348 below. We also provide
349 a `pre-built Docker image <jjb-docker_>`_ with `jenkins-jobs` already installed.
350
351 Installing Jenkins Job Builder
352 ------------------------------
353
354 For users who aren't already experienced with Docker or otherwise don't want
355 to use our `pre-built JJB Docker image <jjb-docker_>`_, installing JJB into a
356 virtual environment is an equally good option.
357
358 We recommend using `pip <Installing JJB using pip_>`_ to assist with JJB
359 installs, but we
360 also document `installing from a git repository manually
361 <Installing JJB Manually_>`_.
362 For both, we recommend using Python `Virtual Environments`_
363 to isolate JJB and its dependencies.
364
365 The `builder/jjb/requirements.txt <odl-jjb-requirements.txt_>`_ file contains the currently
366 recommended JJB version. Because JJB is fairly unstable, it may be necessary
367 to debug things by installing different versions. This is documented for both
368 `pip-assisted <Installing JJB using pip_>`_ and `manual
369 <Installing JJB Manually_>`_ installs.
370
371 Virtual Environments
372 --------------------
373
374 For both `pip-assisted <Installing JJB using pip_>`_ and `manual
375 <Installing JJB Manually_>`_ JJB
376 installs, we recommend using `Python Virtual Environments <python-virtualenv_>`_
377 to manage JJB and its
378 Python dependencies. The `python-virtualenvwrapper`_ tool can help you do so.
379
380 There are good docs for installing `python-virtualenvwrapper`_. On Linux systems
381 with pip (typical), they amount to:
382
383 .. code-block:: bash
384
385     sudo pip install virtualenvwrapper
386
387 A virtual environment is simply a directory that you install Python programs
388 into and then append to the front of your path, causing those copies to be
389 found before any system-wide versions.
390
391 Create a new virtual environment for JJB.
392
393 .. code-block:: bash
394
395     # Virtaulenvwrapper uses this dir for virtual environments
396     $ echo $WORKON_HOME
397     /home/daniel/.virtualenvs
398     # Make a new virtual environment
399     $ mkvirtualenv jjb
400     # A new venv dir was created
401     (jjb)$ ls -rc $WORKON_HOME | tail -n 1
402     jjb
403     # The new venv was added to the front of this shell's path
404     (jjb)$ echo $PATH
405     /home/daniel/.virtualenvs/jjb/bin:<my normal path>
406     # Software installed to venv, like pip, is found before system-wide copies
407     (jjb)$ command -v pip
408     /home/daniel/.virtualenvs/jjb/bin/pip
409
410 With your virtual environment active, you should install JJB. Your install will
411 be isolated to that virtual environment's directory and only visible when the
412 virtual environment is active.
413
414 You can easily leave and return to your venv. Make sure you activate it before
415 each use of JJB.
416
417 .. code-block:: bash
418
419     (jjb)$ deactivate
420     $ command -v jenkins-jobs
421     # No jenkins-jobs executable found
422     $ workon jjb
423     (jjb)$ command -v jenkins-jobs
424     $WORKON_HOME/jjb/bin/jenkins-jobs
425
426 Installing JJB using pip
427 ------------------------
428
429 The recommended way to install JJB is via pip.
430
431 First, clone the latest version of the `releng-builder-repo`_.
432
433 .. code-block:: bash
434
435     $ git clone https://git.opendaylight.org/gerrit/p/releng/builder.git
436
437 Before actually installing JJB and its dependencies, make sure you've `created
438 and activated <Virtual Environments_>`_ a virtual environment for JJB.
439
440 .. code-block:: bash
441
442     $ mkvirtualenv jjb
443
444 The recommended version of JJB to install is the version specified in the
445 `builder/jjb/requirements.txt <odl-jjb-requirements.txt_>`_ file.
446
447 .. code-block:: bash
448
449     # From the root of the releng/builder repo
450     (jjb)$ pip install -r jjb/requirements.txt
451
452 To validate that JJB was successfully installed you can run this command:
453
454 .. code-block:: bash
455
456     (jjb)$ jenkins-jobs --version
457
458 TODO: Explain that only the currently merged jjb/requirements.txt is supported,
459 other options described below are for troubleshooting only.
460
461 To change the version of JJB specified by `builder/jjb/requirements.txt
462 <odl-jjb-requirements.txt_>`_
463 to install from the latest commit to the master branch of JJB's git repository:
464
465 .. code-block:: bash
466
467     $ cat jjb/requirements.txt
468     -e git+https://git.openstack.org/openstack-infra/jenkins-job-builder#egg=jenkins-job-builder
469
470 To install from a tag, like 1.4.0:
471
472 .. code-block:: bash
473
474     $ cat jjb/requirements.txt
475     -e git+https://git.openstack.org/openstack-infra/jenkins-job-builder@1.4.0#egg=jenkins-job-builder
476
477 Installing JJB Manually
478 -----------------------
479
480 This section documents installing JJB from its manually cloned repository.
481
482 Note that `installing via pip <Installing JJB using pip_>`_ is typically simpler.
483
484 Checkout the version of JJB's source you'd like to build.
485
486 For example, using master:
487
488 .. code-block:: bash
489
490     $ git clone https://git.openstack.org/openstack-infra/jenkins-job-builder
491
492 Using a tag, like 1.4.0:
493
494 .. code-block:: bash
495
496     $ git clone https://git.openstack.org/openstack-infra/jenkins-job-builder
497     $ cd jenkins-job-builder
498     $ git checkout tags/1.4.0
499
500 Before actually installing JJB and its dependencies, make sure you've `created
501 and activated <Virtual Environments_>`_ a virtual environment for JJB.
502
503 .. code-block:: bash
504
505     $ mkvirtualenv jjb
506
507 You can then use JJB's `requirements.txt <jjb-requirements.txt_>`_ file to
508 install its
509 dependencies. Note that we're not using `sudo` to install as root, since we want
510 to make use of the venv we've configured for our current user.
511
512 .. code-block:: bash
513
514     # In the cloned JJB repo, with the desired version of the code checked out
515     (jjb)$ pip install -r requirements.txt
516
517 Then install JJB from the repo with:
518
519 .. code-block:: bash
520
521     (jjb)$ pip install .
522
523 To validate that JJB was successfully installed you can run this command:
524
525 .. code-block:: bash
526
527     (jjb)$ jenkins-jobs --version
528
529 JJB Docker Image
530 ----------------
531
532 `Docker <docker-docs_>`_ is an open platform used to create virtualized Linux containers
533 for shipping self-contained applications. Docker leverages LinuX Containers
534 \(LXC\) running on the same operating system as the host machine, whereas a
535 traditional VM runs an operating system over the host.
536
537 .. code-block:: bash
538
539     docker pull zxiiro/jjb-docker
540     docker run --rm -v ${PWD}:/jjb jjb-docker
541
542 This `Dockerfile <jjb-dockerfile_>`_ created the
543 `zxiiro/jjb-docker image <jjb-docker_>`_.
544 By default it will run:
545
546 .. code-block:: bash
547
548     jenkins-jobs test .
549
550 You'll need to use the `-v/--volume=[]` parameter to mount a directory
551 containing your YAML files, as well as a configured `jenkins.ini` file if you
552 wish to upload your jobs to the `Jenkins Sandbox`_.
553
554 Jenkins Job Templates
555 ---------------------
556
557 The OpenDaylight `RelEng/Builder <releng-builder-wiki_>`_ project provides
558 `jjb-templates`_ that can be used to define basic jobs.
559
560 The *Gerrit Trigger* listed in the jobs are keywords that can be used to
561 trigger the job to run manually by simply leaving a comment in Gerrit for the
562 patch you wish to trigger against.
563
564 All jobs have a default build-timeout value of 360 minutes (6 hrs) but can be
565 overrided via the opendaylight-infra-wrappers' build-timeout property.
566
567 TODO: Group jobs into categories: every-patch, after-merge, on-demand, etc.
568 TODO: Reiterate that "remerge" triggers all every-patch jobs at once,
569 because when only a subset of jobs is triggered, Gerrit forgets valid -1 from jobs outside the subset.
570 TODO: Document that only drafts and commit-message-only edits do not trigger every-patch jobs.
571 TODO: Document test-{project}-{feature} and test-{project}-all.
572
573 .. raw:: html
574
575     <table class="table table-bordered">
576       <tr class="warning">
577         <td><b>Job Template</b><br/>{project}-distribution-check-{stream}</td>
578         <td><b>Gerrit Trigger</b><br/>recheck</td>
579       </tr>
580       <tr>
581         <td colspan="2">
582           This job runs the PROJECT-distribution-check-BRANCH job which is
583           building also integration/distribution project in order to run SingleFeatureTest.
584           It also performs various other checks in order to prevent the change to break autorelease.
585         </td>
586       </tr>
587
588       <tr class="warning">
589         <td><b>Job Template</b><br/>{project}-integration-{stream}</td>
590         <td></td>
591       </tr>
592       <tr>
593         <td colspan="2">
594           The Integration Job Template creates a job which runs when a project that your
595           project depends on is successfully built. This job type is basically the same
596           as a verify job except that it triggers from other Jenkins jobs instead of via
597           Gerrit review updates. The dependencies that triger integration jobs are listed
598           in your project.cfg file under the <b>DEPENDENCIES</b> variable.
599
600           If no dependencies are listed then this job type is disabled by default.
601         </td>
602       </tr>
603
604       <tr class="warning">
605         <td><b>Job Template</b><br/>{project}-merge-{stream}</td>
606         <td><b>Gerrit Trigger</b><br/>remerge</td>
607       </tr>
608       <tr>
609         <td colspan="2">
610           This job will trigger once a Gerrit patch is merged into the repo.
611           It will build HEAD of the current project branch and also run the Maven goals
612           <b>source:jar</b> and <b>javadoc:jar</b>.
613           Artifacts are uploaded to OpenDaylight's
614           <a href="https://nexus.opendaylight.org">Nexus</a> on completion.
615
616           A distribution-merge-{stream} job is triggered to add the new artifacts to the
617           integration distribution.
618
619           Running the "remerge" trigger is possible before a Change is merged,
620           it would still build the actual HEAD. This job does not alter Gerrit votes.
621         </td>
622       </tr>
623
624       <tr class="warning">
625         <td><b>Job Template</b><br/>{project}-sonar</td>
626         <td><b>Gerrit Trigger</b><br/>run-sonar</td>
627       </tr>
628       <tr>
629         <td colspan="2">
630           This job runs Sonar analysis and reports the results to
631           OpenDaylight's <a href="https://sonar.opendaylight.org">Sonar</a>
632           dashboard.
633
634           The Sonar Job Template creates a job which will run against the
635           master branch, or if BRANCHES are specified in the CFG file it will
636           create a job for the <b>First</b> branch listed.
637
638           <div class="admonition note">
639             <p class="first admonition-title">Note</p>
640             <p>
641               Running the "run-sonar" trigger will cause Jenkins to remove
642               its existing vote if it's already -1'd or +1'd a comment. You
643               will need to re-run your verify job (recheck) after running
644               this to get Jenkins to re-vote.
645             </p>
646           </div>
647         </td>
648       </tr>
649
650       <tr class="warning">
651         <td><b>Job Template</b><br/>{project}-validate-autorelease-{stream}</td>
652         <td><b>Gerrit Trigger</b><br/>recheck</td>
653       </tr>
654       <tr>
655         <td colspan="2">
656           This job runs the PROJECT-validate-autorelease-BRANCH job which is
657           used as a quick sanity test to ensure that a patch does not depend on
658           features that do not exist in the current release.
659         </td>
660       </tr>
661
662       <tr class="warning">
663         <td><b>Job Template</b><br/>{project}-verify-{stream}-{maven}-{jdks}</td>
664         <td><b>Gerrit Trigger</b><br/>recheck</td>
665       </tr>
666       <tr>
667         <td colspan="2">
668           The Verify job template creates a Gerrit Trigger job that will
669           trigger when a new patch is submitted to Gerrit.
670           The job only builds the project code (including unit and integration tests).
671         </td>
672       </tr>
673
674       <tr class="warning">
675         <td><b>Job Template</b><br/>{project}-verify-node-{stream}</td>
676         <td><b>Gerrit Trigger</b><br/>recheck</td>
677       </tr>
678       <tr>
679         <td colspan="2">
680           This job template can be used by a project that is NodeJS based. It
681           simply installs a python virtualenv and uses that to install nodeenv
682           which is then used to install another virtualenv for nodejs. It then
683           calls <b>npm install</b> and <b>npm test</b> to run the unit tests.
684           When  using this template you need to provide a {nodedir} and
685           {nodever} containing the directory relative to the project root
686           containing the nodejs package.json and version of node you wish to
687           run tests with.
688         </td>
689       </tr>
690
691       <tr class="warning">
692         <td><b>Job Template</b><br/>{project}-verify-python-{stream} | {project}-verify-tox-{stream}</td>
693         <td><b>Gerrit Trigger</b><br/>recheck</td>
694       </tr>
695       <tr>
696         <td colspan="2">
697           This job template can be used by a project that uses Tox to build. It
698           simply installs a Python virtualenv and uses tox to run the tests
699           defined in the project's tox.ini file. If the tox.ini is anywhere
700           other than the project's repo root, the path to its directory
701           relative to the project's repo root should be passed as {toxdir}.
702
703           The 2 template names verify-python & verify-tox are identical and are
704           aliases to each other. This allows the project to use the naming that
705           is most reasonable for them.
706         </td>
707       </tr>
708
709       <tr class="warning">
710         <td><b>Job Template</b><br/>integration-patch-test-{stream}</td>
711         <td><b>Gerrit Trigger</b><br/>test-integration</td>
712       </tr>
713       <tr>
714         <td colspan="2">
715         </td>
716       </tr>
717
718       <tr class="warning">
719         <td><b>Job Template</b><br/>integration-patch-test-{stream}</td>
720         <td><b>Gerrit Trigger</b><br/>test-integration</td>
721       </tr>
722       <tr>
723         <td colspan="2">
724           This job builds a distribution against your Java patch and triggers distribution sanity CSIT jobs.
725           Leave a comment with trigger keyword above to activate it for a particular patch.
726           This job should not alter Gerrit votes for a given patch.
727
728           The list of CSIT jobs to trigger is defined in csit-list
729           <a href="https://git.opendaylight.org/gerrit/gitweb?p=releng/builder.git;a=blob;f=jjb/integration/integration-test-jobs.yaml">here</a>.
730
731           Some considerations when using this job:
732           <ul>
733             <li>
734               The patch test verification takes some time (~2 hours) + consumes a lot of
735               resources so it is not meant to be used for every patch.
736             </li>
737             <li>
738               The system tests for master patches will fail most of the times because both
739               code and test are unstable during the release cycle (should be good by the
740               end of the cycle).
741             </li>
742             <li>
743               Because of the above, patch test results typically have to be interpreted by
744               system test experts. The <a href="https://wiki.opendaylight.org/view/Integration/Test">Integration/Test</a>
745               project can help with that.
746             </li>
747         </td>
748       </tr>
749     </table>
750
751 Maven Properties
752 ----------------
753
754 We provide a properties which your job can take advantage of if you want to do
755 something different depending on the job type that is run. If you create a
756 profile that activates on a property listed blow. The JJB templated jobs will
757 be able to activate the profile during the build to run any custom code you
758 wish to run in your project.
759
760 .. code-block:: bash
761
762     -Dmerge   : This flag is passed in our Merge job and is equivalent to the
763                 Maven property
764                 <merge>true</merge>.
765     -Dsonar   : This flag is passed in our Sonar job and is equivalent to the
766                 Maven property
767                 <sonar>true</sonar>.
768
769 Jenkins Sandbox
770 ---------------
771
772 The `jenkins-sandbox`_ instance's purpose is to allow projects to test their JJB
773 setups before merging their code over to the RelEng master silo. It is
774 configured similarly to the master instance, although it cannot publish
775 artifacts or vote in Gerrit.
776
777 If your project requires access to the sandbox please open an OpenDaylight
778 Helpdesk ticket (<helpdesk@opendaylight.org>) and provide your ODL ID.
779
780 Notes Regarding the Sandbox
781 ^^^^^^^^^^^^^^^^^^^^^^^^^^^
782
783 * Jobs are automatically deleted every Saturday at 08:00 UTC
784 * Committers can login and configure Jenkins jobs in the sandbox directly
785   (unlike with the master silo)
786 * Sandbox configuration mirrors the master silo when possible
787 * Sandbox jobs can NOT upload artifacts to Nexus
788 * Sandbox jobs can NOT vote on Gerrit
789
790 Configuration
791 ^^^^^^^^^^^^^
792
793 Make sure you have Jenkins Job Builder [properly installed](#jjb_install).
794
795 If you do not already have access, open an OpenDaylight Helpdesk ticket
796 (<helpdesk@opendaylight.org>) to request access to ODL's sandbox instance.
797 Integration/Test (`integration-test-wiki`_) committers have access by default.
798
799 JJB reads user-specific configuration from a `jenkins.ini`_. An
800 example is provided by releng/builder at `example-jenkins.ini`_.
801
802 .. code-block:: bash
803
804     # If you don't have RelEng/Builder's repo, clone it
805     $ git clone https://git.opendaylight.org/gerrit/p/releng/builder.git
806     # Make a copy of the example JJB config file (in the builder/ directory)
807     $ cp jenkins.ini.example jenkins.ini
808     # Edit jenkins.ini with your username, API token and ODL's sandbox URL
809     $ cat jenkins.ini
810     <snip>
811     [jenkins]
812     user=<your ODL username>
813     password=<your ODL Jenkins sandbox API token>
814     url=https://jenkins.opendaylight.org/sandbox
815     <snip>
816
817 To get your API token, `login to the Jenkins **sandbox** instance
818 <jenkins-sandbox-login_>`_ (*not
819 the main master Jenkins instance, different tokens*), go to your user page (by
820 clicking on your username, for example), click "Configure" and then "Show API
821 Token".
822
823 Manual Method
824 ^^^^^^^^^^^^^
825
826 If you `installed JJB locally into a virtual environment
827 <Installing Jenkins Job Builder_>`_,
828 you should now activate that virtual environment to access the `jenkins-jobs`
829 executable.
830
831 .. code-block:: bash
832
833     $ workon jjb
834     (jjb)$
835
836 You'll want to work from the root of the RelEng/Builder repo, and you should
837 have your `jenkins.ini` file [properly configured](#sandbox_config).
838
839 Testing Jobs
840 ^^^^^^^^^^^^
841
842 It's good practice to use the `test` command to validate your JJB files before
843 pushing them.
844
845 .. code-block:: bash
846
847     jenkins-jobs --conf jenkins.ini test jjb/ <job-name>
848
849 If the job you'd like to test is a template with variables in its name, it
850 must be manually expanded before use. For example, the commonly used template
851 `{project}-csit-verify-1node-{functionality}` might expand to
852 `ovsdb-csit-verify-1node-netvirt`.
853
854 .. code-block:: bash
855
856     jenkins-jobs --conf jenkins.ini test jjb/ ovsdb-csit-verify-1node-netvirt
857
858 Successful tests output the XML description of the Jenkins job described by
859 the specified JJB job name.
860
861 Pushing Jobs
862 ^^^^^^^^^^^^
863
864 Once you've `configured your \`jenkins.ini\` <Configuration_>`_ and `verified your
865 JJB jobs <Testing Jobs_>`_ produce valid XML descriptions of Jenkins jobs you
866 can push them to the Jenkins sandbox.
867
868 .. important::
869
870     When pushing with `jenkins-jobs`, a log message with the number
871     of jobs you're pushing will be issued, typically to stdout.
872     **If the number is greater than 1** (or the number of jobs you
873     passed to the command to push) then you are pushing too many
874     jobs and should **`ctrl+c` to cancel the upload**. Else you will
875     flood the system with jobs.
876
877     .. code-block:: bash
878
879         INFO:jenkins_jobs.builder:Number of jobs generated:  1
880
881     **Failing to provide the final `<job-name>` param will push all
882     jobs!**
883
884     .. code-block:: bash
885
886         # Don't push all jobs by omitting the final param! (ctrl+c to abort)
887         jenkins-jobs --conf jenkins.ini update jjb/ <job-name>
888
889 Running Jobs
890 ^^^^^^^^^^^^
891
892 Once you have your Jenkins job configuration `pushed to the
893 Sandbox <Pushing Jobs_>`_ you can trigger it to run.
894
895 Find your newly-pushed job on the `Sandbox's web UI <jenkins-sandbox_>`_. Click
896 on its name to see the job's details.
897
898 Make sure you're `logged in <jenkins-sandbox-login_>`_ to the Sandbox.
899
900 Click "Build with Parameters" and then "Build".
901
902 Wait for your job to be scheduled and run. Click on the job number to see
903 details, including console output.
904
905 Make changes to your JJB configuration, re-test, re-push and re-run until
906 your job is ready.
907
908 Docker Method
909 ^^^^^^^^^^^^^
910
911 If `using Docker <JJB Docker image_>`_:
912
913 .. code-block:: bash
914
915     # To test
916     docker run --rm -v ${PWD}:/jjb zxiiro/jjb-docker
917
918 .. important::
919
920     When pushing with `jenkins-jobs`, a log message with
921     the number of jobs you're pushing will be issued, typically to stdout.
922     **If the number is greater than 1** (or the number of jobs you passed to
923     the command to push) then you are pushing too many jobs and should **`ctrl+c`
924     to cancel the upload**. Else you will flood the system with jobs.
925
926     .. code-block:: bash
927
928           INFO:jenkins_jobs.builder:Number of jobs generated:  1
929
930     **Failing to provide the final `<job-name>` param will push all jobs!**
931
932     .. code-block:: bash
933
934         # To upload jobs to the sandbox
935         # Please ensure that you include a configured jenkins.ini in your volume mount
936         # Making sure not to push more jobs than expected, ctrl+c to abort
937         docker run --rm -v ${PWD}:/jjb zxiiro/jjb-docker jenkins-jobs --conf jenkins.ini update . openflowplugin-csit-periodic-1node-cds-longevity-only-master
938
939 .. _docker-docs: https://www.docker.com/whatisdocker/
940 .. _example-jenkins.ini: https://git.opendaylight.org/gerrit/gitweb?p=releng/builder.git;a=blob;f=jenkins.ini.example
941 .. _integration-test-wiki: https://wiki.opendaylight.org/view/Integration/Test
942 .. _jenkins-master: https://jenkins.opendaylight.org/releng
943 .. _jenkins-sandbox: https://jenkins.opendaylight.org/sandbox
944 .. _jenkins-sandbox-login: https://jenkins.opendaylight.org/sandbox/login
945 .. _jenkins.ini: http://docs.openstack.org/infra/jenkins-job-builder/execution.html#configuration-file
946 .. _jjb-autoupdate-project.py: https://git.opendaylight.org/gerrit/gitweb?p=releng/builder.git;a=blob;f=scripts/jjb-autoupdate-project.py
947 .. _jjb-docker: https://hub.docker.com/r/zxiiro/jjb-docker/
948 .. _jjb-dockerfile: https://github.com/zxiiro/jjb-docker/blob/master/Dockerfile
949 .. _jjb-docs: http://ci.openstack.org/jenkins-job-builder/
950 .. _jjb-init-project.py: https://git.opendaylight.org/gerrit/gitweb?p=releng/builder.git;a=blob;f=scripts/jjb-init-project.py
951 .. _jjb-repo: https://github.com/openstack-infra/jenkins-job-builder
952 .. _jjb-requirements.txt: https://github.com/openstack-infra/jenkins-job-builder/blob/master/requirements.txt
953 .. _jjb-templates: https://git.opendaylight.org/gerrit/gitweb?p=releng/builder.git;a=tree;f=jjb
954 .. _odl-jjb-requirements.txt: https://git.opendaylight.org/gerrit/gitweb?p=releng/builder.git;a=blob;f=jjb/requirements.txt
955 .. _odl-nexus: https://nexus.opendaylight.org
956 .. _odl-sonar: https://sonar.opendaylight.org
957 .. _python-virtualenv: https://virtualenv.readthedocs.org/en/latest/
958 .. _python-virtualenvwrapper: https://virtualenvwrapper.readthedocs.org/en/latest/
959 .. _releng-wiki: https://wiki.opendaylight.org/view/RelEng:Main
960 .. _releng-builder-gerrit: https://git.opendaylight.org/gerrit/#/admin/projects/releng/builder
961 .. _releng-builder-repo: https://git.opendaylight.org/gerrit/gitweb?p=releng%2Fbuilder.git;a=summary
962 .. _releng-builder-wiki: https://wiki.opendaylight.org/view/RelEng/Builder
963 .. _streams-design-background: https://lists.opendaylight.org/pipermail/release/2015-July/003139.html
964 .. _spinup-scripts: https://git.opendaylight.org/gerrit/gitweb?p=releng/builder.git;a=tree;f=jenkins-scripts
965 .. _spinup-scripts-basic_settings.sh: https://git.opendaylight.org/gerrit/gitweb?p=releng/builder.git;a=blob;f=jenkins-scripts/basic_settings.sh
966 .. _spinup-scripts-controller.sh: https://git.opendaylight.org/gerrit/gitweb?p=releng/builder.git;a=blob;f=jenkins-scripts/controller.sh