jjb/integration/integration-deploy-controller-run-test.sh

   1 #@IgnoreInspection BashAddShebang
   2 # Activate robotframework virtualenv
   3 # ${ROBOT_VENV} comes from the integration-install-robotframework.sh
   4 # script.
   5 # shellcheck source=${ROBOT_VENV}/bin/activate disable=SC1091
   6 source ${ROBOT_VENV}/bin/activate
   7
   8 CONTROLLERMEM="2048m"
   9
  10 if [ "${ENABLE_HAPROXY_FOR_NEUTRON}" == "yes" ]; then
  11     echo "Configure cluster"
  12     AKKACONF=/tmp/${BUNDLEFOLDER}/configuration/initial/akka.conf
  13     MODULESCONF=/tmp/${BUNDLEFOLDER}/configuration/initial/modules.conf
  14     MODULESHARDSCONF=/tmp/${BUNDLEFOLDER}/configuration/initial/module-shards.conf
  15 fi
  16
  17 if [ ${CONTROLLERSCOPE} == 'all' ]; then
  18     ACTUALFEATURES="odl-integration-compatible-with-all,${CONTROLLERFEATURES}"
  19     CONTROLLERMEM="3072m"
  20     COOLDOWN_PERIOD="180"
  21 else
  22     ACTUALFEATURES="${CONTROLLERFEATURES}"
  23     COOLDOWN_PERIOD="60"
  24 fi
  25
  26 # Some versions of jenkins job builder result in feature list containing spaces
  27 # and ending in newline. Remove all that.
  28 ACTUALFEATURES=`echo "${ACTUALFEATURES}" | tr -d '\n \r'`
  29
  30 if [ -f "${WORKSPACE}/test/csit/scriptplans/${TESTPLAN}" ]; then
  31     echo "scriptplan exists!!!"
  32     echo "Changing the scriptplan path..."
  33     cat ${WORKSPACE}/test/csit/scriptplans/${TESTPLAN} | sed "s:integration:${WORKSPACE}:" > scriptplan.txt
  34     cat scriptplan.txt
  35     for line in $( egrep -v '(^[[:space:]]*#|^[[:space:]]*$)' scriptplan.txt ); do
  36         echo "Executing ${line}..."
  37         # shellcheck source=${line} disable=SC1091
  38         source ${line}
  39     done
  40 fi
  41
  42 cat > ${WORKSPACE}/configuration-script.sh <<EOF
  43
  44 echo "Changing to /tmp"
  45 cd /tmp
  46
  47 echo "Downloading the distribution..."
  48 wget --progress=dot:mega '${ACTUAL_BUNDLE_URL}'
  49
  50 echo "Extracting the new controller..."
  51 unzip -q ${BUNDLE}
  52
  53 echo "Configuring the startup features..."
  54 FEATURESCONF=/tmp/${BUNDLEFOLDER}/etc/org.apache.karaf.features.cfg
  55 CUSTOMPROP=/tmp/${BUNDLEFOLDER}/etc/custom.properties
  56 sed -ie "s/\(featuresBoot=\|featuresBoot =\)/featuresBoot = ${ACTUALFEATURES},/g" \${FEATURESCONF}
  57 sed -ie "s%mvn:org.opendaylight.integration/features-integration-index/${BUNDLEVERSION}/xml/features%mvn:org.opendaylight.integration/features-integration-index/${BUNDLEVERSION}/xml/features,mvn:org.opendaylight.integration/features-integration-test/${BUNDLEVERSION}/xml/features,mvn:org.apache.karaf.decanter/apache-karaf-decanter/1.0.0/xml/features%g" \${FEATURESCONF}
  58 cat \${FEATURESCONF}
  59
  60 if [ "${ODL_ENABLE_L3_FWD}" == "yes" ]; then
  61     echo "Enable the l3.fwd in custom.properties..."
  62     echo "ovsdb.l3.fwd.enabled=yes" >> \${CUSTOMPROP}
  63 fi
  64 cat \${CUSTOMPROP}
  65
  66 echo "Configuring the log..."
  67 LOGCONF=/tmp/${BUNDLEFOLDER}/etc/org.ops4j.pax.logging.cfg
  68 sed -ie 's/log4j.appender.out.maxBackupIndex=10/log4j.appender.out.maxBackupIndex=1/g' \${LOGCONF}
  69 # FIXME: Make log size limit configurable from build parameter.
  70 sed -ie 's/log4j.appender.out.maxFileSize=1MB/log4j.appender.out.maxFileSize=30GB/g' \${LOGCONF}
  71 echo "log4j.logger.org.opendaylight.yangtools.yang.parser.repo.YangTextSchemaContextResolver = WARN" >> \${LOGCONF}
  72 cat \${LOGCONF}
  73
  74 echo "Configure java home and max memory..."
  75 MEMCONF=/tmp/${BUNDLEFOLDER}/bin/setenv
  76 sed -ie 's%^# export JAVA_HOME%export JAVA_HOME="\${JAVA_HOME:-${JAVA_HOME}}"%g' \${MEMCONF}
  77 sed -ie 's/JAVA_MAX_MEM="2048m"/JAVA_MAX_MEM="${CONTROLLERMEM}"/g' \${MEMCONF}
  78 cat \${MEMCONF}
  79
  80 echo "Listing all open ports on controller system..."
  81 netstat -pnatu
  82
  83 echo "Set Java version"
  84 sudo /usr/sbin/alternatives --install /usr/bin/java java ${JAVA_HOME}/bin/java 1
  85 sudo /usr/sbin/alternatives --set java ${JAVA_HOME}/bin/java
  86 echo "JDK default version..."
  87 java -version
  88
  89 echo "Set JAVA_HOME"
  90 export JAVA_HOME="${JAVA_HOME}"
  91 # Did you know that in HERE documents, single quote is an ordinary character, but backticks are still executing?
  92 JAVA_RESOLVED=\`readlink -e "\${JAVA_HOME}/bin/java"\`
  93 echo "Java binary pointed at by JAVA_HOME: \${JAVA_RESOLVED}"
  94
  95 if [ "${ENABLE_HAPROXY_FOR_NEUTRON}" == "yes" ]; then
  96
  97     # Copy shard file if exists
  98     if [ -f /tmp/custom_shard_config.txt ]; then
  99         echo "Custom shard config exists!!!"
 100         echo "Copying the shard config..."
 101         cp /tmp/custom_shard_config.txt /tmp/${BUNDLEFOLDER}/bin/
 102     fi
 103
 104     echo "Configuring cluster"
 105     /tmp/${BUNDLEFOLDER}/bin/configure_cluster.sh \$1 \$2
 106
 107     echo "Dump akka.conf"
 108     cat ${AKKACONF}
 109
 110     echo "Dump modules.conf"
 111     cat ${MODULESCONF}
 112
 113      echo "Dump module-shards.conf"
 114      cat ${MODULESHARDSCONF}
 115 fi
 116
 117 EOF
 118
 119 # Create the startup script to be run on controller.
 120 cat > ${WORKSPACE}/startup-script.sh <<EOF
 121
 122 echo "Redirecting karaf console output to karaf_console.log"
 123 export KARAF_REDIRECT="/tmp/${BUNDLEFOLDER}/data/log/karaf_console.log"
 124
 125 echo "Starting controller..."
 126 /tmp/${BUNDLEFOLDER}/bin/start
 127
 128 EOF
 129
 130 cat > ${WORKSPACE}/post-startup-script.sh <<EOF
 131
 132 echo "Waiting for controller to come up..."
 133 COUNT="0"
 134 while true; do
 135     RESP="\$( curl --user admin:admin -sL -w "%{http_code} %{url_effective}\\n" http://localhost:8181/restconf/modules -o /dev/null )"
 136     echo \$RESP
 137     if [ "${ENABLE_HAPROXY_FOR_NEUTRON}" == "yes" ]; then
 138         SHARD="\$( curl --user admin:admin -sL -w "%{http_code} %{url_effective}\\n" http://localhost:8181/jolokia/read/org.opendaylight.controller:Category=Shards,name=\member-\$1-shard-inventory-config,type=DistributedConfigDatastore)"
 139         echo \$SHARD
 140     fi
 141     if ([[ \$RESP == *"200"* ]] && ([[ "${ENABLE_HAPROXY_FOR_NEUTRON}" != "yes" ]] || [[ \$SHARD  == *'"status":200'* ]])); then
 142         echo Controller is UP
 143         break
 144     elif (( "\$COUNT" > "600" )); then
 145         echo Timeout Controller DOWN
 146         echo "Dumping first 500K bytes of karaf log..."
 147         head --bytes=500K "/tmp/${BUNDLEFOLDER}/data/log/karaf.log"
 148         echo "Dumping last 500K bytes of karaf log..."
 149         tail --bytes=500K "/tmp/${BUNDLEFOLDER}/data/log/karaf.log"
 150         echo "Listing all open ports on controller system"
 151         netstat -pnatu
 152         exit 1
 153     else
 154         COUNT=\$(( \${COUNT} + 1 ))
 155         sleep 1
 156         if [[ \$((\$COUNT % 5)) == 0 ]]; then
 157             echo already waited \${COUNT} seconds...
 158         fi
 159     fi
 160 done
 161
 162 echo "Listing all open ports on controller system..."
 163 netstat -pnatu
 164
 165 function exit_on_log_file_message {
 166     echo "looking for \"\$1\" in log file"
 167     if grep --quiet "\$1" "/tmp/${BUNDLEFOLDER}/data/log/karaf.log"; then
 168         echo ABORTING: found "\$1"
 169         echo "Dumping first 500K bytes of karaf log..."
 170         head --bytes=500K "/tmp/${BUNDLEFOLDER}/data/log/karaf.log"
 171         echo "Dumping last 500K bytes of karaf log..."
 172         tail --bytes=500K "/tmp/${BUNDLEFOLDER}/data/log/karaf.log"
 173         exit 1
 174     fi
 175 }
 176
 177 exit_on_log_file_message 'BindException: Address already in use'
 178 exit_on_log_file_message 'server is unhealthy'
 179
 180 EOF
 181
 182 [ "$NUM_OPENSTACK_SITES" ] || NUM_OPENSTACK_SITES=1
 183 NUM_ODLS_PER_SITE=$((NUM_ODL_SYSTEM / NUM_OPENSTACK_SITES))
 184 for i in `seq 1 ${NUM_OPENSTACK_SITES}`
 185 do
 186     # Get full list of ODL nodes for this site
 187     odl_node_list=
 188     for j in `seq 1 ${NUM_ODLS_PER_SITE}`
 189     do
 190         odl_ip=ODL_SYSTEM_$(((i - 1) * NUM_ODLS_PER_SITE + j))_IP
 191         odl_node_list="${odl_node_list} ${!odl_ip}"
 192     done
 193
 194     for j in `seq 1 ${NUM_ODLS_PER_SITE}`
 195     do
 196         odl_ip=ODL_SYSTEM_$(((i - 1) * NUM_ODLS_PER_SITE + j))_IP
 197         # Copy over the config script to controller and execute it (parameters are used only for cluster)
 198         echo "Execute the configuration script on controller ${!odl_ip} for index $j with node list ${odl_node_list}"
 199         scp ${WORKSPACE}/configuration-script.sh ${!odl_ip}:/tmp
 200         ssh ${!odl_ip} "bash /tmp/configuration-script.sh ${j} '${odl_node_list}'"
 201     done
 202 done
 203
 204 echo "Locating config plan to use..."
 205 configplan_filepath="${WORKSPACE}/test/csit/configplans/${STREAMTESTPLAN}"
 206 if [ ! -f "${configplan_filepath}" ]; then
 207     configplan_filepath="${WORKSPACE}/test/csit/configplans/${TESTPLAN}"
 208 fi
 209
 210 if [ -f "${configplan_filepath}" ]; then
 211     echo "configplan exists!!!"
 212     echo "Changing the configplan path..."
 213     cat ${configplan_filepath} | sed "s:integration:${WORKSPACE}:" > configplan.txt
 214     cat configplan.txt
 215     for line in $( egrep -v '(^[[:space:]]*#|^[[:space:]]*$)' configplan.txt ); do
 216         echo "Executing ${line}..."
 217         # shellcheck source=${line} disable=SC1091
 218         source ${line}
 219     done
 220 fi
 221
 222 # Copy over the startup script to controller and execute it.
 223 for i in `seq 1 ${NUM_ODL_SYSTEM}`
 224 do
 225     CONTROLLERIP=ODL_SYSTEM_${i}_IP
 226     echo "Execute the startup script on controller ${!CONTROLLERIP}"
 227     scp ${WORKSPACE}/startup-script.sh ${!CONTROLLERIP}:/tmp
 228     ssh ${!CONTROLLERIP} "bash /tmp/startup-script.sh"
 229 done
 230
 231 seed_index=1
 232 for i in `seq 1 ${NUM_ODL_SYSTEM}`
 233 do
 234     CONTROLLERIP=ODL_SYSTEM_${i}_IP
 235     echo "Execute the post startup script on controller ${!CONTROLLERIP}"
 236     scp ${WORKSPACE}/post-startup-script.sh ${!CONTROLLERIP}:/tmp
 237     ssh ${!CONTROLLERIP} "bash /tmp/post-startup-script.sh $(( seed_index++ ))"
 238     if [ $(( $i % (${NUM_ODL_SYSTEM} / ${NUM_OPENSTACK_SITES}) )) == 0 ]; then
 239         seed_index=1
 240     fi
 241 done
 242
 243 echo "Cool down for ${COOLDOWN_PERIOD} seconds :)..."
 244 sleep ${COOLDOWN_PERIOD}
 245
 246 echo "Generating controller variables..."
 247 for i in `seq 1 ${NUM_ODL_SYSTEM}`
 248 do
 249     CONTROLLERIP=ODL_SYSTEM_${i}_IP
 250     odl_variables=${odl_variables}" -v ${CONTROLLERIP}:${!CONTROLLERIP}"
 251     echo "Lets's take the karaf thread dump"
 252     KARAF_PID=$(ssh ${!CONTROLLERIP} "ps aux | grep ${KARAF_ARTIFACT} | grep -v grep | tr -s ' ' | cut -f2 -d' '")
 253     ssh ${!CONTROLLERIP} "jstack $KARAF_PID"> ${WORKSPACE}/karaf_${i}_threads_before.log || true
 254 done
 255
 256 if [ ${NUM_OPENSTACK_SYSTEM} -gt 0 ]; then
 257    echo "Exiting without running tests to deploy openstack for testing"
 258    exit
 259 fi
 260
 261 echo "Generating mininet variables..."
 262 for i in `seq 1 ${NUM_TOOLS_SYSTEM}`
 263 do
 264     MININETIP=TOOLS_SYSTEM_${i}_IP
 265     tools_variables=${tools_variables}" -v ${MININETIP}:${!MININETIP}"
 266 done
 267
 268 echo "Locating test plan to use..."
 269 testplan_filepath="${WORKSPACE}/test/csit/testplans/${STREAMTESTPLAN}"
 270 if [ ! -f "${testplan_filepath}" ]; then
 271     testplan_filepath="${WORKSPACE}/test/csit/testplans/${TESTPLAN}"
 272 fi
 273
 274 echo "Changing the testplan path..."
 275 cat "${testplan_filepath}" | sed "s:integration:${WORKSPACE}:" > testplan.txt
 276 cat testplan.txt
 277 SUITES=$( egrep -v '(^[[:space:]]*#|^[[:space:]]*$)' testplan.txt | tr '\012' ' ' )
 278
 279 echo "Starting Robot test suites ${SUITES} ..."
 280 pybot -N ${TESTPLAN} --removekeywords wuks -c critical -e exclude -e skip_if_${DISTROSTREAM} -v BUNDLEFOLDER:${BUNDLEFOLDER} -v WORKSPACE:/tmp \
 281 -v JAVA_HOME:${JAVA_HOME} -v BUNDLE_URL:${ACTUAL_BUNDLE_URL} -v NEXUSURL_PREFIX:${NEXUSURL_PREFIX} \
 282 -v CONTROLLER:${ODL_SYSTEM_IP} -v ODL_SYSTEM_IP:${ODL_SYSTEM_IP} -v ODL_SYSTEM_1_IP:${ODL_SYSTEM_IP} \
 283 -v CONTROLLER_USER:${USER} -v ODL_SYSTEM_USER:${USER} \
 284 -v TOOLS_SYSTEM_IP:${TOOLS_SYSTEM_IP} -v TOOLS_SYSTEM_2_IP:${TOOLS_SYSTEM_2_IP} -v TOOLS_SYSTEM_3_IP:${TOOLS_SYSTEM_3_IP} \
 285 -v TOOLS_SYSTEM_4_IP:${TOOLS_SYSTEM_4_IP} -v TOOLS_SYSTEM_5_IP:${TOOLS_SYSTEM_5_IP} -v TOOLS_SYSTEM_6_IP:${TOOLS_SYSTEM_6_IP} \
 286 -v TOOLS_SYSTEM_USER:${USER} -v JDKVERSION:${JDKVERSION} -v ODL_STREAM:${DISTROSTREAM} -v NUM_ODL_SYSTEM:${NUM_ODL_SYSTEM} \
 287 -v MININET:${TOOLS_SYSTEM_IP} -v MININET1:${TOOLS_SYSTEM_2_IP} -v MININET2:${TOOLS_SYSTEM_3_IP} \
 288 -v MININET3:${TOOLS_SYSTEM_4_IP} -v MININET4:${TOOLS_SYSTEM_5_IP} -v MININET5:${TOOLS_SYSTEM_6_IP} \
 289 -v MININET_USER:${USER} -v USER_HOME:${HOME} ${TESTOPTIONS} ${SUITES} || true
 290 # FIXME: Sort (at least -v) options alphabetically.
 291
 292 echo "Examining the files in data/log and checking filesize"
 293 ssh ${ODL_SYSTEM_IP} "ls -altr /tmp/${BUNDLEFOLDER}/data/log/"
 294 ssh ${ODL_SYSTEM_IP} "du -hs /tmp/${BUNDLEFOLDER}/data/log/*"
 295
 296 for i in `seq 1 ${NUM_ODL_SYSTEM}`
 297 do
 298     CONTROLLERIP=ODL_SYSTEM_${i}_IP
 299     echo "Lets's take the karaf thread dump again..."
 300     KARAF_PID=$(ssh ${!CONTROLLERIP} "ps aux | grep ${KARAF_ARTIFACT} | grep -v grep | tr -s ' ' | cut -f2 -d' '")
 301     ssh ${!CONTROLLERIP} "jstack $KARAF_PID"> ${WORKSPACE}/karaf_${i}_threads_after.log || true
 302     echo "Killing ODL"
 303     set +e  # We do not want to create red dot just because something went wrong while fetching logs.
 304     ssh "${!CONTROLLERIP}" bash -c 'ps axf | grep karaf | grep -v grep | awk '"'"'{print "kill -9 " $1}'"'"' | sh'
 305 done
 306
 307 sleep 5
 308 # FIXME: Unify the copy process between various scripts.
 309 # TODO: Use rsync.
 310 for i in `seq 1 ${NUM_ODL_SYSTEM}`
 311 do
 312     CONTROLLERIP=ODL_SYSTEM_${i}_IP
 313     echo "Compressing karaf.log ${i}"
 314     ssh ${!CONTROLLERIP} gzip --best /tmp/${BUNDLEFOLDER}/data/log/karaf.log
 315     echo "Fetching compressed karaf.log ${i}"
 316     scp "${!CONTROLLERIP}:/tmp/${BUNDLEFOLDER}/data/log/karaf.log.gz" "odl${i}_karaf.log.gz" && ssh ${!CONTROLLERIP} rm -f "/tmp/${BUNDLEFOLDER}/data/log/karaf.log.gz"
 317     # TODO: Should we compress the output log file as well?
 318     scp "${!CONTROLLERIP}:/tmp/${BUNDLEFOLDER}/data/log/karaf_console.log" "odl${i}_karaf_console.log" && ssh ${!CONTROLLERIP} rm -f "/tmp/${BUNDLEFOLDER}/data/log/karaf_console.log"
 319     echo "Fetch GC logs"
 320     # FIXME: Put member index in filename, instead of directory name.
 321     mkdir -p "gclogs-${i}"
 322     scp "${!CONTROLLERIP}:/tmp/${BUNDLEFOLDER}/data/log/*.log" "gclogs-${i}/" && ssh ${!CONTROLLERIP} rm -f "/tmp/${BUNDLEFOLDER}/data/log/*.log"
 323 done
 324
 325 echo "Examine copied files"
 326 ls -lt
 327
 328 true  # perhaps Jenkins is testing last exit code
 329
 330 # vim: ts=4 sw=4 sts=4 et ft=sh :