jjb/integration/integration-deploy-controller-run-test.sh

   1 #@IgnoreInspection BashAddShebang
   2 # Activate robotframework virtualenv
   3 # ${ROBOT_VENV} comes from the integration-install-robotframework.sh
   4 # script.
   5 # shellcheck source=${ROBOT_VENV}/bin/activate disable=SC1091
   6 source ${ROBOT_VENV}/bin/activate
   7 source /tmp/common-functions.sh ${BUNDLEFOLDER}
   8
   9 if [ "${ENABLE_HAPROXY_FOR_NEUTRON}" == "yes" ]; then
  10     echo "Configure cluster"
  11     AKKACONF=/tmp/${BUNDLEFOLDER}/configuration/initial/akka.conf
  12     MODULESCONF=/tmp/${BUNDLEFOLDER}/configuration/initial/modules.conf
  13     MODULESHARDSCONF=/tmp/${BUNDLEFOLDER}/configuration/initial/module-shards.conf
  14 fi
  15
  16 if [ ${CONTROLLERSCOPE} == 'all' ]; then
  17     ACTUALFEATURES="odl-integration-compatible-with-all,${CONTROLLERFEATURES}"
  18     export CONTROLLERMEM="3072m"
  19     COOLDOWN_PERIOD="180"
  20 else
  21     ACTUALFEATURES="odl-infrautils-ready,${CONTROLLERFEATURES}"
  22     COOLDOWN_PERIOD="60"
  23 fi
  24
  25 # Some versions of jenkins job builder result in feature list containing spaces
  26 # and ending in newline. Remove all that.
  27 ACTUALFEATURES=`echo "${ACTUALFEATURES}" | tr -d '\n \r'`
  28 echo "ACTUALFEATURES: ${ACTUALFEATURES}"
  29
  30 # In the case that we want to install features via karaf shell, a space separated list of
  31 # ACTUALFEATURES IS NEEDED
  32 SPACE_SEPARATED_FEATURES=$(echo "${ACTUALFEATURES}" | tr ',' ' ')
  33 echo "SPACE_SEPARATED_FEATURES: ${SPACE_SEPARATED_FEATURES}"
  34
  35 if [ -f "${WORKSPACE}/test/csit/scriptplans/${TESTPLAN}" ]; then
  36     echo "scriptplan exists!!!"
  37     echo "Changing the scriptplan path..."
  38     cat ${WORKSPACE}/test/csit/scriptplans/${TESTPLAN} | sed "s:integration:${WORKSPACE}:" > scriptplan.txt
  39     cat scriptplan.txt
  40     for line in $( egrep -v '(^[[:space:]]*#|^[[:space:]]*$)' scriptplan.txt ); do
  41         echo "Executing ${line}..."
  42         # shellcheck source=${line} disable=SC1091
  43         source ${line}
  44     done
  45 fi
  46
  47 cat > ${WORKSPACE}/configuration-script.sh <<EOF
  48 set -x
  49 source /tmp/common-functions.sh ${BUNDLEFOLDER}
  50
  51 echo "Changing to /tmp"
  52 cd /tmp
  53
  54 echo "Downloading the distribution..."
  55 wget --progress=dot:mega '${ACTUAL_BUNDLE_URL}'
  56
  57 echo "Extracting the new controller..."
  58 unzip -q ${BUNDLE}
  59
  60 echo "Adding external repositories..."
  61 sed -ie "s%org.ops4j.pax.url.mvn.repositories=%org.ops4j.pax.url.mvn.repositories=http://repo1.maven.org/maven2@id=central, http://repository.springsource.com/maven/bundles/release@id=spring.ebr.release, http://repository.springsource.com/maven/bundles/external@id=spring.ebr.external, http://zodiac.springsource.com/maven/bundles/release@id=gemini, http://repository.apache.org/content/groups/snapshots-group@id=apache@snapshots@noreleases, https://oss.sonatype.org/content/repositories/snapshots@id=sonatype.snapshots.deploy@snapshots@noreleases, https://oss.sonatype.org/content/repositories/ops4j-snapshots@id=ops4j.sonatype.snapshots.deploy@snapshots@noreleases%g" ${MAVENCONF}
  62 cat ${MAVENCONF}
  63
  64 if [[ "$USEFEATURESBOOT" == "True" ]]; then
  65     echo "Configuring the startup features..."
  66     sed -ie "s/\(featuresBoot=\|featuresBoot =\)/featuresBoot = ${ACTUALFEATURES},/g" ${FEATURESCONF}
  67 fi
  68
  69 FEATURE_TEST_STRING="features-integration-test"
  70 if [[ "$KARAF_VERSION" == "karaf4" ]]; then
  71     FEATURE_TEST_STRING="features-test"
  72 fi
  73
  74 sed -ie "s%\(featuresRepositories=\|featuresRepositories =\)%featuresRepositories = mvn:org.opendaylight.integration/\${FEATURE_TEST_STRING}/${BUNDLEVERSION}/xml/features,mvn:org.apache.karaf.decanter/apache-karaf-decanter/1.0.0/xml/features,%g" ${FEATURESCONF}
  75 cat ${FEATURESCONF}
  76
  77 if [ "${ODL_ENABLE_L3_FWD}" == "yes" ]; then
  78     echo "Enable the l3.fwd in custom.properties..."
  79     echo "ovsdb.l3.fwd.enabled=yes" >> ${CUSTOMPROP}
  80 fi
  81 cat ${CUSTOMPROP}
  82
  83 configure_karaf_log "${KARAF_VERSION}" "${CONTROLLERDEBUGMAP}"
  84
  85 set_java_vars "${JAVA_HOME}"
  86
  87 echo "Listing all open ports on controller system..."
  88 netstat -pnatu
  89
  90 if [ "${ENABLE_HAPROXY_FOR_NEUTRON}" == "yes" ]; then
  91
  92     # Copy shard file if exists
  93     if [ -f /tmp/custom_shard_config.txt ]; then
  94         echo "Custom shard config exists!!!"
  95         echo "Copying the shard config..."
  96         cp /tmp/custom_shard_config.txt /tmp/${BUNDLEFOLDER}/bin/
  97     fi
  98
  99     echo "Configuring cluster"
 100     /tmp/${BUNDLEFOLDER}/bin/configure_cluster.sh \$1 \$2
 101
 102     echo "Dump akka.conf"
 103     cat ${AKKACONF}
 104
 105     echo "Dump modules.conf"
 106     cat ${MODULESCONF}
 107
 108      echo "Dump module-shards.conf"
 109      cat ${MODULESHARDSCONF}
 110 fi
 111
 112 EOF
 113 # cat > ${WORKSPACE}/configuration-script.sh <<EOF
 114
 115 # Create the startup script to be run on controller.
 116 cat > ${WORKSPACE}/startup-script.sh <<EOF
 117
 118 echo "Redirecting karaf console output to karaf_console.log"
 119 export KARAF_REDIRECT="/tmp/${BUNDLEFOLDER}/data/log/karaf_console.log"
 120 mkdir -p /tmp/${BUNDLEFOLDER}/data/log
 121
 122 echo "Starting controller..."
 123 /tmp/${BUNDLEFOLDER}/bin/start
 124
 125 EOF
 126 # cat > ${WORKSPACE}/startup-script.sh <<EOF
 127
 128 cat > ${WORKSPACE}/post-startup-script.sh <<EOF
 129
 130 if [[ "$USEFEATURESBOOT" != "True" ]]; then
 131
 132     # wait up to 60s for karaf port 8101 to be opened, polling every 5s
 133     loop_count=0;
 134     until [[ \$loop_count -ge 12 ]]; do
 135         netstat -na | grep 8101 && break;
 136         loop_count=\$[\$loop_count+1];
 137         sleep 5;
 138     done
 139
 140     echo "going to feature:install --no-auto-refresh ${SPACE_SEPARATED_FEATURES} one at a time"
 141     for feature in ${SPACE_SEPARATED_FEATURES}; do
 142         sshpass -p karaf ssh -o StrictHostKeyChecking=no \
 143                              -o UserKnownHostsFile=/dev/null \
 144                              -o LogLevel=error \
 145                              -p 8101 karaf@localhost \
 146                              feature:install --no-auto-refresh \$feature;
 147     done
 148
 149     echo "ssh to karaf console to list -i installed features"
 150     sshpass -p karaf ssh -o StrictHostKeyChecking=no \
 151                          -o UserKnownHostsFile=/dev/null \
 152                          -o LogLevel=error \
 153                          -p 8101 karaf@localhost \
 154                          feature:list -i
 155 fi
 156
 157 echo "Waiting for controller to come up..."
 158 COUNT="0"
 159 while true; do
 160     RESP="\$( curl --user admin:admin -sL -w "%{http_code} %{url_effective}\\n" http://localhost:8181/restconf/modules -o /dev/null )"
 161     echo \$RESP
 162     if [ "${ENABLE_HAPROXY_FOR_NEUTRON}" == "yes" ]; then
 163         SHARD="\$( curl --user admin:admin -sL -w "%{http_code} %{url_effective}\\n" http://localhost:8181/jolokia/read/org.opendaylight.controller:Category=Shards,name=\member-\$1-shard-inventory-config,type=DistributedConfigDatastore)"
 164         echo \$SHARD
 165     fi
 166     if ([[ \$RESP == *"200"* ]] && ([[ "${ENABLE_HAPROXY_FOR_NEUTRON}" != "yes" ]] || [[ \$SHARD  == *'"status":200'* ]])); then
 167         echo Controller is UP
 168         break
 169     elif (( "\$COUNT" > "600" )); then
 170         echo Timeout Controller DOWN
 171         echo "Dumping first 500K bytes of karaf log..."
 172         head --bytes=500K "/tmp/${BUNDLEFOLDER}/data/log/karaf.log"
 173         echo "Dumping last 500K bytes of karaf log..."
 174         tail --bytes=500K "/tmp/${BUNDLEFOLDER}/data/log/karaf.log"
 175         echo "Listing all open ports on controller system"
 176         netstat -pnatu
 177         exit 1
 178     else
 179         COUNT=\$(( \${COUNT} + 1 ))
 180         sleep 1
 181         if [[ \$((\$COUNT % 5)) == 0 ]]; then
 182             echo already waited \${COUNT} seconds...
 183         fi
 184     fi
 185 done
 186
 187 echo "Listing all open ports on controller system..."
 188 netstat -pnatu
 189
 190 function exit_on_log_file_message {
 191     echo "looking for \"\$1\" in log file"
 192     if grep --quiet "\$1" "/tmp/${BUNDLEFOLDER}/data/log/karaf.log"; then
 193         echo ABORTING: found "\$1"
 194         echo "Dumping first 500K bytes of karaf log..."
 195         head --bytes=500K "/tmp/${BUNDLEFOLDER}/data/log/karaf.log"
 196         echo "Dumping last 500K bytes of karaf log..."
 197         tail --bytes=500K "/tmp/${BUNDLEFOLDER}/data/log/karaf.log"
 198         exit 1
 199     fi
 200 }
 201
 202 exit_on_log_file_message 'BindException: Address already in use'
 203 exit_on_log_file_message 'server is unhealthy'
 204
 205 EOF
 206 # cat > ${WORKSPACE}/post-startup-script.sh <<EOF
 207
 208 [ "$NUM_OPENSTACK_SITES" ] || NUM_OPENSTACK_SITES=1
 209 NUM_ODLS_PER_SITE=$((NUM_ODL_SYSTEM / NUM_OPENSTACK_SITES))
 210 for i in `seq 1 ${NUM_OPENSTACK_SITES}`
 211 do
 212     # Get full list of ODL nodes for this site
 213     odl_node_list=
 214     for j in `seq 1 ${NUM_ODLS_PER_SITE}`
 215     do
 216         odl_ip=ODL_SYSTEM_$(((i - 1) * NUM_ODLS_PER_SITE + j))_IP
 217         odl_node_list="${odl_node_list} ${!odl_ip}"
 218     done
 219
 220     for j in `seq 1 ${NUM_ODLS_PER_SITE}`
 221     do
 222         odl_ip=ODL_SYSTEM_$(((i - 1) * NUM_ODLS_PER_SITE + j))_IP
 223         # Copy over the config script to controller and execute it (parameters are used only for cluster)
 224         echo "Execute the configuration script on controller ${!odl_ip} for index $j with node list ${odl_node_list}"
 225         scp ${WORKSPACE}/configuration-script.sh ${!odl_ip}:/tmp
 226         ssh ${!odl_ip} "bash /tmp/configuration-script.sh ${j} '${odl_node_list}'"
 227     done
 228 done
 229
 230 echo "Locating config plan to use..."
 231 configplan_filepath="${WORKSPACE}/test/csit/configplans/${STREAMTESTPLAN}"
 232 if [ ! -f "${configplan_filepath}" ]; then
 233     configplan_filepath="${WORKSPACE}/test/csit/configplans/${TESTPLAN}"
 234 fi
 235
 236 if [ -f "${configplan_filepath}" ]; then
 237     echo "configplan exists!!!"
 238     echo "Changing the configplan path..."
 239     cat ${configplan_filepath} | sed "s:integration:${WORKSPACE}:" > configplan.txt
 240     cat configplan.txt
 241     for line in $( egrep -v '(^[[:space:]]*#|^[[:space:]]*$)' configplan.txt ); do
 242         echo "Executing ${line}..."
 243         # shellcheck source=${line} disable=SC1091
 244         source ${line}
 245     done
 246 fi
 247
 248 # Copy over the startup script to controller and execute it.
 249 for i in `seq 1 ${NUM_ODL_SYSTEM}`
 250 do
 251     CONTROLLERIP=ODL_SYSTEM_${i}_IP
 252     echo "Execute the startup script on controller ${!CONTROLLERIP}"
 253     scp ${WORKSPACE}/startup-script.sh ${!CONTROLLERIP}:/tmp
 254     ssh ${!CONTROLLERIP} "bash /tmp/startup-script.sh"
 255 done
 256
 257 seed_index=1
 258 for i in `seq 1 ${NUM_ODL_SYSTEM}`
 259 do
 260     CONTROLLERIP=ODL_SYSTEM_${i}_IP
 261     echo "Execute the post startup script on controller ${!CONTROLLERIP}"
 262     scp ${WORKSPACE}/post-startup-script.sh ${!CONTROLLERIP}:/tmp
 263     ssh ${!CONTROLLERIP} "bash /tmp/post-startup-script.sh $(( seed_index++ ))"
 264     if [ $(( $i % (${NUM_ODL_SYSTEM} / ${NUM_OPENSTACK_SITES}) )) == 0 ]; then
 265         seed_index=1
 266     fi
 267 done
 268
 269 echo "Cool down for ${COOLDOWN_PERIOD} seconds :)..."
 270 sleep ${COOLDOWN_PERIOD}
 271
 272 echo "Generating controller variables..."
 273 for i in `seq 1 ${NUM_ODL_SYSTEM}`
 274 do
 275     CONTROLLERIP=ODL_SYSTEM_${i}_IP
 276     odl_variables=${odl_variables}" -v ${CONTROLLERIP}:${!CONTROLLERIP}"
 277     echo "Lets's take the karaf thread dump"
 278     ssh ${!CONTROLLERIP} "sudo ps aux" > ${WORKSPACE}/ps_before.log
 279     pid=$(grep org.apache.karaf.main.Main ${WORKSPACE}/ps_before.log | grep -v grep | tr -s ' ' | cut -f2 -d' ')
 280     echo "karaf main: org.apache.karaf.main.Main, pid:${pid}"
 281     ssh ${!CONTROLLERIP} "jstack ${pid}" > ${WORKSPACE}/karaf_${i}_${pid}_threads_before.log || true
 282 done
 283
 284 if [ ${NUM_OPENSTACK_SYSTEM} -gt 0 ]; then
 285    echo "Exiting without running tests to deploy openstack for testing"
 286    exit
 287 fi
 288
 289 echo "Generating mininet variables..."
 290 for i in `seq 1 ${NUM_TOOLS_SYSTEM}`
 291 do
 292     MININETIP=TOOLS_SYSTEM_${i}_IP
 293     tools_variables=${tools_variables}" -v ${MININETIP}:${!MININETIP}"
 294 done
 295
 296 echo "Locating test plan to use..."
 297 testplan_filepath="${WORKSPACE}/test/csit/testplans/${STREAMTESTPLAN}"
 298 if [ ! -f "${testplan_filepath}" ]; then
 299     testplan_filepath="${WORKSPACE}/test/csit/testplans/${TESTPLAN}"
 300 fi
 301
 302 echo "Changing the testplan path..."
 303 cat "${testplan_filepath}" | sed "s:integration:${WORKSPACE}:" > testplan.txt
 304 cat testplan.txt
 305
 306 # Use the testplan if specific SUITES are not defined.
 307 if [ -z "${SUITES}" ]; then
 308     SUITES=`egrep -v '(^[[:space:]]*#|^[[:space:]]*$)' testplan.txt | tr '\012' ' '`
 309 else
 310     newsuites=""
 311     workpath="${WORKSPACE}/test/csit/suites"
 312     for suite in ${SUITES}; do
 313         fullsuite="${workpath}/${suite}"
 314         if [ -z "${newsuites}" ]; then
 315             newsuites+=${fullsuite}
 316         else
 317             newsuites+=" "${fullsuite}
 318         fi
 319     done
 320     SUITES=${newsuites}
 321 fi
 322
 323 echo "Starting Robot test suites ${SUITES} ..."
 324 pybot -N ${TESTPLAN} --removekeywords wuks -c critical -e exclude -e skip_if_${DISTROSTREAM} -v BUNDLEFOLDER:${BUNDLEFOLDER} -v WORKSPACE:/tmp \
 325 -v JAVA_HOME:${JAVA_HOME} -v BUNDLE_URL:${ACTUAL_BUNDLE_URL} -v NEXUSURL_PREFIX:${NEXUSURL_PREFIX} \
 326 -v CONTROLLER:${ODL_SYSTEM_IP} -v ODL_SYSTEM_IP:${ODL_SYSTEM_IP} -v ODL_SYSTEM_1_IP:${ODL_SYSTEM_IP} \
 327 -v CONTROLLER_USER:${USER} -v ODL_SYSTEM_USER:${USER} \
 328 -v TOOLS_SYSTEM_IP:${TOOLS_SYSTEM_IP} -v TOOLS_SYSTEM_2_IP:${TOOLS_SYSTEM_2_IP} -v TOOLS_SYSTEM_3_IP:${TOOLS_SYSTEM_3_IP} \
 329 -v TOOLS_SYSTEM_4_IP:${TOOLS_SYSTEM_4_IP} -v TOOLS_SYSTEM_5_IP:${TOOLS_SYSTEM_5_IP} -v TOOLS_SYSTEM_6_IP:${TOOLS_SYSTEM_6_IP} \
 330 -v TOOLS_SYSTEM_USER:${USER} -v JDKVERSION:${JDKVERSION} -v ODL_STREAM:${DISTROSTREAM} -v NUM_ODL_SYSTEM:${NUM_ODL_SYSTEM} \
 331 -v MININET:${TOOLS_SYSTEM_IP} -v MININET1:${TOOLS_SYSTEM_2_IP} -v MININET2:${TOOLS_SYSTEM_3_IP} \
 332 -v MININET3:${TOOLS_SYSTEM_4_IP} -v MININET4:${TOOLS_SYSTEM_5_IP} -v MININET5:${TOOLS_SYSTEM_6_IP} \
 333 -v MININET_USER:${USER} -v USER_HOME:${HOME} ${TESTOPTIONS} ${SUITES} || true
 334 # FIXME: Sort (at least -v) options alphabetically.
 335
 336 echo "Examining the files in data/log and checking filesize"
 337 ssh ${ODL_SYSTEM_IP} "ls -altr /tmp/${BUNDLEFOLDER}/data/log/"
 338 ssh ${ODL_SYSTEM_IP} "du -hs /tmp/${BUNDLEFOLDER}/data/log/*"
 339
 340 for i in `seq 1 ${NUM_ODL_SYSTEM}`
 341 do
 342     CONTROLLERIP=ODL_SYSTEM_${i}_IP
 343     echo "Lets's take the karaf thread dump again..."
 344     ssh ${!CONTROLLERIP} "sudo ps aux" > ${WORKSPACE}/ps_after.log
 345     pid=$(grep org.apache.karaf.main.Main ${WORKSPACE}/ps_after.log | grep -v grep | tr -s ' ' | cut -f2 -d' ')
 346     echo "karaf main: org.apache.karaf.main.Main, pid:${pid}"
 347     ssh ${!CONTROLLERIP} "jstack ${pid}" > ${WORKSPACE}/karaf_${i}_${pid}_threads_after.log || true
 348     echo "Killing ODL"
 349     set +e  # We do not want to create red dot just because something went wrong while fetching logs.
 350     ssh "${!CONTROLLERIP}" bash -c 'ps axf | grep karaf | grep -v grep | awk '"'"'{print "kill -9 " $1}'"'"' | sh'
 351 done
 352
 353 sleep 5
 354 # FIXME: Unify the copy process between various scripts.
 355 # TODO: Use rsync.
 356 for i in `seq 1 ${NUM_ODL_SYSTEM}`
 357 do
 358     CONTROLLERIP=ODL_SYSTEM_${i}_IP
 359     echo "Compressing karaf.log ${i}"
 360     ssh ${!CONTROLLERIP} gzip --best /tmp/${BUNDLEFOLDER}/data/log/karaf.log
 361     echo "Fetching compressed karaf.log ${i}"
 362     scp "${!CONTROLLERIP}:/tmp/${BUNDLEFOLDER}/data/log/karaf.log.gz" "odl${i}_karaf.log.gz" && ssh ${!CONTROLLERIP} rm -f "/tmp/${BUNDLEFOLDER}/data/log/karaf.log.gz"
 363     # TODO: Should we compress the output log file as well?
 364     scp "${!CONTROLLERIP}:/tmp/${BUNDLEFOLDER}/data/log/karaf_console.log" "odl${i}_karaf_console.log" && ssh ${!CONTROLLERIP} rm -f "/tmp/${BUNDLEFOLDER}/data/log/karaf_console.log"
 365     echo "Fetch GC logs"
 366     # FIXME: Put member index in filename, instead of directory name.
 367     mkdir -p "gclogs-${i}"
 368     scp "${!CONTROLLERIP}:/tmp/${BUNDLEFOLDER}/data/log/*.log" "gclogs-${i}/" && ssh ${!CONTROLLERIP} rm -f "/tmp/${BUNDLEFOLDER}/data/log/*.log"
 369 done
 370
 371 echo "Examine copied files"
 372 ls -lt
 373
 374 true  # perhaps Jenkins is testing last exit code
 375
 376 # vim: ts=4 sw=4 sts=4 et ft=sh :