jjb/integration/integration-deploy-controller-run-test.sh

   1 #@IgnoreInspection BashAddShebang
   2 # Activate robotframework virtualenv
   3 # ${ROBOT_VENV} comes from the integration-install-robotframework.sh
   4 # script.
   5 # shellcheck source=${ROBOT_VENV}/bin/activate disable=SC1091
   6 source ${ROBOT_VENV}/bin/activate
   7
   8 MAVENCONF=/tmp/${BUNDLEFOLDER}/etc/org.ops4j.pax.url.mvn.cfg
   9 FEATURESCONF=/tmp/${BUNDLEFOLDER}/etc/org.apache.karaf.features.cfg
  10 CUSTOMPROP=/tmp/${BUNDLEFOLDER}/etc/custom.properties
  11 LOGCONF=/tmp/${BUNDLEFOLDER}/etc/org.ops4j.pax.logging.cfg
  12 MEMCONF=/tmp/${BUNDLEFOLDER}/bin/setenv
  13 CONTROLLERMEM="2048m"
  14
  15 if [ "${ENABLE_HAPROXY_FOR_NEUTRON}" == "yes" ]; then
  16     echo "Configure cluster"
  17     AKKACONF=/tmp/${BUNDLEFOLDER}/configuration/initial/akka.conf
  18     MODULESCONF=/tmp/${BUNDLEFOLDER}/configuration/initial/modules.conf
  19     MODULESHARDSCONF=/tmp/${BUNDLEFOLDER}/configuration/initial/module-shards.conf
  20 fi
  21
  22 if [ ${CONTROLLERSCOPE} == 'all' ]; then
  23     ACTUALFEATURES="odl-integration-compatible-with-all,${CONTROLLERFEATURES}"
  24     CONTROLLERMEM="3072m"
  25     COOLDOWN_PERIOD="180"
  26 else
  27     ACTUALFEATURES="odl-infrautils-ready,${CONTROLLERFEATURES}"
  28     COOLDOWN_PERIOD="60"
  29 fi
  30
  31 # Some versions of jenkins job builder result in feature list containing spaces
  32 # and ending in newline. Remove all that.
  33 ACTUALFEATURES=`echo "${ACTUALFEATURES}" | tr -d '\n \r'`
  34
  35 if [ -f "${WORKSPACE}/test/csit/scriptplans/${TESTPLAN}" ]; then
  36     echo "scriptplan exists!!!"
  37     echo "Changing the scriptplan path..."
  38     cat ${WORKSPACE}/test/csit/scriptplans/${TESTPLAN} | sed "s:integration:${WORKSPACE}:" > scriptplan.txt
  39     cat scriptplan.txt
  40     for line in $( egrep -v '(^[[:space:]]*#|^[[:space:]]*$)' scriptplan.txt ); do
  41         echo "Executing ${line}..."
  42         # shellcheck source=${line} disable=SC1091
  43         source ${line}
  44     done
  45 fi
  46
  47 cat > ${WORKSPACE}/configuration-script.sh <<EOF
  48 echo "Create RAM disk"
  49 sudo mount -t tmpfs -o size=2G tmpfs /tmp
  50
  51 echo "Changing to /tmp"
  52 cd /tmp
  53
  54 echo "Downloading the distribution..."
  55 wget --progress=dot:mega '${ACTUAL_BUNDLE_URL}'
  56
  57 echo "Extracting the new controller..."
  58 unzip -q ${BUNDLE}
  59
  60 echo "Adding external repositories..."
  61 sed -ie "s%org.ops4j.pax.url.mvn.repositories=%org.ops4j.pax.url.mvn.repositories=http://repo1.maven.org/maven2@id=central, http://repository.springsource.com/maven/bundles/release@id=spring.ebr.release, http://repository.springsource.com/maven/bundles/external@id=spring.ebr.external, http://zodiac.springsource.com/maven/bundles/release@id=gemini, http://repository.apache.org/content/groups/snapshots-group@id=apache@snapshots@noreleases, https://oss.sonatype.org/content/repositories/snapshots@id=sonatype.snapshots.deploy@snapshots@noreleases, https://oss.sonatype.org/content/repositories/ops4j-snapshots@id=ops4j.sonatype.snapshots.deploy@snapshots@noreleases%g" ${MAVENCONF}
  62 cat ${MAVENCONF}
  63
  64 echo "Configuring the startup features..."
  65 sed -ie "s/\(featuresBoot=\|featuresBoot =\)/featuresBoot = ${ACTUALFEATURES},/g" ${FEATURESCONF}
  66
  67 FEATURE_INDEX_STRING="features-integration-index"
  68 FEATURE_TEST_STRING="features-integration-test"
  69 if [[ "$KARAF_VERSION" == "karaf4" ]]; then
  70     FEATURE_INDEX_STRING="features-index"
  71     FEATURE_TEST_STRING="features-test"
  72 fi
  73
  74 sed -ie "s%mvn:org.opendaylight.integration/\${FEATURE_INDEX_STRING}/${BUNDLEVERSION}/xml/features%mvn:org.opendaylight.integration/\${FEATURE_INDEX_STRING}/${BUNDLEVERSION}/xml/features,mvn:org.opendaylight.integration/\${FEATURE_TEST_STRING}/${BUNDLEVERSION}/xml/features,mvn:org.apache.karaf.decanter/apache-karaf-decanter/1.0.0/xml/features%g" ${FEATURESCONF}
  75 cat ${FEATURESCONF}
  76
  77 if [ "${ODL_ENABLE_L3_FWD}" == "yes" ]; then
  78     echo "Enable the l3.fwd in custom.properties..."
  79     echo "ovsdb.l3.fwd.enabled=yes" >> ${CUSTOMPROP}
  80 fi
  81 cat ${CUSTOMPROP}
  82
  83 echo "Configuring the log..."
  84 sed -ie 's/log4j.appender.out.maxBackupIndex=10/log4j.appender.out.maxBackupIndex=1/g' ${LOGCONF}
  85 # FIXME: Make log size limit configurable from build parameter.
  86 sed -ie 's/log4j.appender.out.maxFileSize=1MB/log4j.appender.out.maxFileSize=30GB/g' ${LOGCONF}
  87 echo "log4j.logger.org.opendaylight.yangtools.yang.parser.repo.YangTextSchemaContextResolver = WARN" >> ${LOGCONF}
  88 # Add custom logging levels
  89 # CONTROLLERDEBUGMAP is expected to be a key:value map of space separated values like "module:level module2:level2"
  90 # where module is abbreviated and does not include org.opendaylight
  91 unset IFS
  92 if [ -n "${CONTROLLERDEBUGMAP}" ]; then
  93     for kv in ${CONTROLLERDEBUGMAP}; do
  94         module=\${kv%%:*}
  95         level=\${kv#*:}
  96         if [ -n \${module} ] && [ -n \${level} ]; then
  97             echo "log4j.logger.org.opendaylight.\${module} = \${level}" >> ${LOGCONF}
  98         fi
  99     done
 100 fi
 101 cat ${LOGCONF}
 102
 103 echo "Configure java home and max memory..."
 104 sed -ie 's%^# export JAVA_HOME%export JAVA_HOME="\${JAVA_HOME:-${JAVA_HOME}}"%g' ${MEMCONF}
 105 sed -ie 's/JAVA_MAX_MEM="2048m"/JAVA_MAX_MEM="${CONTROLLERMEM}"/g' ${MEMCONF}
 106 cat ${MEMCONF}
 107
 108 echo "Listing all open ports on controller system..."
 109 netstat -pnatu
 110
 111 echo "Set Java version"
 112 sudo /usr/sbin/alternatives --install /usr/bin/java java ${JAVA_HOME}/bin/java 1
 113 sudo /usr/sbin/alternatives --set java ${JAVA_HOME}/bin/java
 114 echo "JDK default version..."
 115 java -version
 116
 117 echo "Set JAVA_HOME"
 118 export JAVA_HOME="${JAVA_HOME}"
 119 # Did you know that in HERE documents, single quote is an ordinary character, but backticks are still executing?
 120 JAVA_RESOLVED=\`readlink -e "\${JAVA_HOME}/bin/java"\`
 121 echo "Java binary pointed at by JAVA_HOME: \${JAVA_RESOLVED}"
 122
 123 if [ "${ENABLE_HAPROXY_FOR_NEUTRON}" == "yes" ]; then
 124
 125     # Copy shard file if exists
 126     if [ -f /tmp/custom_shard_config.txt ]; then
 127         echo "Custom shard config exists!!!"
 128         echo "Copying the shard config..."
 129         cp /tmp/custom_shard_config.txt /tmp/${BUNDLEFOLDER}/bin/
 130     fi
 131
 132     echo "Configuring cluster"
 133     /tmp/${BUNDLEFOLDER}/bin/configure_cluster.sh \$1 \$2
 134
 135     echo "Dump akka.conf"
 136     cat ${AKKACONF}
 137
 138     echo "Dump modules.conf"
 139     cat ${MODULESCONF}
 140
 141      echo "Dump module-shards.conf"
 142      cat ${MODULESHARDSCONF}
 143 fi
 144
 145 EOF
 146
 147 # Create the startup script to be run on controller.
 148 cat > ${WORKSPACE}/startup-script.sh <<EOF
 149
 150 echo "Redirecting karaf console output to karaf_console.log"
 151 export KARAF_REDIRECT="/tmp/${BUNDLEFOLDER}/data/log/karaf_console.log"
 152
 153 echo "Starting controller..."
 154 /tmp/${BUNDLEFOLDER}/bin/start
 155
 156 EOF
 157
 158 cat > ${WORKSPACE}/post-startup-script.sh <<EOF
 159
 160 echo "Waiting for controller to come up..."
 161 COUNT="0"
 162 while true; do
 163     RESP="\$( curl --user admin:admin -sL -w "%{http_code} %{url_effective}\\n" http://localhost:8181/restconf/modules -o /dev/null )"
 164     echo \$RESP
 165     if [ "${ENABLE_HAPROXY_FOR_NEUTRON}" == "yes" ]; then
 166         SHARD="\$( curl --user admin:admin -sL -w "%{http_code} %{url_effective}\\n" http://localhost:8181/jolokia/read/org.opendaylight.controller:Category=Shards,name=\member-\$1-shard-inventory-config,type=DistributedConfigDatastore)"
 167         echo \$SHARD
 168     fi
 169     if ([[ \$RESP == *"200"* ]] && ([[ "${ENABLE_HAPROXY_FOR_NEUTRON}" != "yes" ]] || [[ \$SHARD  == *'"status":200'* ]])); then
 170         echo Controller is UP
 171         break
 172     elif (( "\$COUNT" > "600" )); then
 173         echo Timeout Controller DOWN
 174         echo "Dumping first 500K bytes of karaf log..."
 175         head --bytes=500K "/tmp/${BUNDLEFOLDER}/data/log/karaf.log"
 176         echo "Dumping last 500K bytes of karaf log..."
 177         tail --bytes=500K "/tmp/${BUNDLEFOLDER}/data/log/karaf.log"
 178         echo "Listing all open ports on controller system"
 179         netstat -pnatu
 180         exit 1
 181     else
 182         COUNT=\$(( \${COUNT} + 1 ))
 183         sleep 1
 184         if [[ \$((\$COUNT % 5)) == 0 ]]; then
 185             echo already waited \${COUNT} seconds...
 186         fi
 187     fi
 188 done
 189
 190 echo "Listing all open ports on controller system..."
 191 netstat -pnatu
 192
 193 function exit_on_log_file_message {
 194     echo "looking for \"\$1\" in log file"
 195     if grep --quiet "\$1" "/tmp/${BUNDLEFOLDER}/data/log/karaf.log"; then
 196         echo ABORTING: found "\$1"
 197         echo "Dumping first 500K bytes of karaf log..."
 198         head --bytes=500K "/tmp/${BUNDLEFOLDER}/data/log/karaf.log"
 199         echo "Dumping last 500K bytes of karaf log..."
 200         tail --bytes=500K "/tmp/${BUNDLEFOLDER}/data/log/karaf.log"
 201         exit 1
 202     fi
 203 }
 204
 205 exit_on_log_file_message 'BindException: Address already in use'
 206 exit_on_log_file_message 'server is unhealthy'
 207
 208 EOF
 209
 210 [ "$NUM_OPENSTACK_SITES" ] || NUM_OPENSTACK_SITES=1
 211 NUM_ODLS_PER_SITE=$((NUM_ODL_SYSTEM / NUM_OPENSTACK_SITES))
 212 for i in `seq 1 ${NUM_OPENSTACK_SITES}`
 213 do
 214     # Get full list of ODL nodes for this site
 215     odl_node_list=
 216     for j in `seq 1 ${NUM_ODLS_PER_SITE}`
 217     do
 218         odl_ip=ODL_SYSTEM_$(((i - 1) * NUM_ODLS_PER_SITE + j))_IP
 219         odl_node_list="${odl_node_list} ${!odl_ip}"
 220     done
 221
 222     for j in `seq 1 ${NUM_ODLS_PER_SITE}`
 223     do
 224         odl_ip=ODL_SYSTEM_$(((i - 1) * NUM_ODLS_PER_SITE + j))_IP
 225         # Copy over the config script to controller and execute it (parameters are used only for cluster)
 226         echo "Execute the configuration script on controller ${!odl_ip} for index $j with node list ${odl_node_list}"
 227         scp ${WORKSPACE}/configuration-script.sh ${!odl_ip}:/tmp
 228         ssh ${!odl_ip} "bash /tmp/configuration-script.sh ${j} '${odl_node_list}'"
 229     done
 230 done
 231
 232 echo "Locating config plan to use..."
 233 configplan_filepath="${WORKSPACE}/test/csit/configplans/${STREAMTESTPLAN}"
 234 if [ ! -f "${configplan_filepath}" ]; then
 235     configplan_filepath="${WORKSPACE}/test/csit/configplans/${TESTPLAN}"
 236 fi
 237
 238 if [ -f "${configplan_filepath}" ]; then
 239     echo "configplan exists!!!"
 240     echo "Changing the configplan path..."
 241     cat ${configplan_filepath} | sed "s:integration:${WORKSPACE}:" > configplan.txt
 242     cat configplan.txt
 243     for line in $( egrep -v '(^[[:space:]]*#|^[[:space:]]*$)' configplan.txt ); do
 244         echo "Executing ${line}..."
 245         # shellcheck source=${line} disable=SC1091
 246         source ${line}
 247     done
 248 fi
 249
 250 # Copy over the startup script to controller and execute it.
 251 for i in `seq 1 ${NUM_ODL_SYSTEM}`
 252 do
 253     CONTROLLERIP=ODL_SYSTEM_${i}_IP
 254     echo "Execute the startup script on controller ${!CONTROLLERIP}"
 255     scp ${WORKSPACE}/startup-script.sh ${!CONTROLLERIP}:/tmp
 256     ssh ${!CONTROLLERIP} "bash /tmp/startup-script.sh"
 257 done
 258
 259 seed_index=1
 260 for i in `seq 1 ${NUM_ODL_SYSTEM}`
 261 do
 262     CONTROLLERIP=ODL_SYSTEM_${i}_IP
 263     echo "Execute the post startup script on controller ${!CONTROLLERIP}"
 264     scp ${WORKSPACE}/post-startup-script.sh ${!CONTROLLERIP}:/tmp
 265     ssh ${!CONTROLLERIP} "bash /tmp/post-startup-script.sh $(( seed_index++ ))"
 266     if [ $(( $i % (${NUM_ODL_SYSTEM} / ${NUM_OPENSTACK_SITES}) )) == 0 ]; then
 267         seed_index=1
 268     fi
 269 done
 270
 271 echo "Cool down for ${COOLDOWN_PERIOD} seconds :)..."
 272 sleep ${COOLDOWN_PERIOD}
 273
 274 echo "Generating controller variables..."
 275 for i in `seq 1 ${NUM_ODL_SYSTEM}`
 276 do
 277     CONTROLLERIP=ODL_SYSTEM_${i}_IP
 278     odl_variables=${odl_variables}" -v ${CONTROLLERIP}:${!CONTROLLERIP}"
 279     echo "Lets's take the karaf thread dump"
 280     ssh ${!CONTROLLERIP} "sudo ps aux" > ${WORKSPACE}/ps_before.log
 281     pid=$(grep org.apache.karaf.main.Main ${WORKSPACE}/ps_before.log | grep -v grep | tr -s ' ' | cut -f2 -d' ')
 282     echo "karaf main: org.apache.karaf.main.Main, pid:${pid}"
 283     ssh ${!CONTROLLERIP} "jstack ${pid}" > ${WORKSPACE}/karaf_${i}_${pid}_threads_before.log || true
 284 done
 285
 286 if [ ${NUM_OPENSTACK_SYSTEM} -gt 0 ]; then
 287    echo "Exiting without running tests to deploy openstack for testing"
 288    exit
 289 fi
 290
 291 echo "Generating mininet variables..."
 292 for i in `seq 1 ${NUM_TOOLS_SYSTEM}`
 293 do
 294     MININETIP=TOOLS_SYSTEM_${i}_IP
 295     tools_variables=${tools_variables}" -v ${MININETIP}:${!MININETIP}"
 296 done
 297
 298 echo "Locating test plan to use..."
 299 testplan_filepath="${WORKSPACE}/test/csit/testplans/${STREAMTESTPLAN}"
 300 if [ ! -f "${testplan_filepath}" ]; then
 301     testplan_filepath="${WORKSPACE}/test/csit/testplans/${TESTPLAN}"
 302 fi
 303
 304 echo "Changing the testplan path..."
 305 cat "${testplan_filepath}" | sed "s:integration:${WORKSPACE}:" > testplan.txt
 306 cat testplan.txt
 307 SUITES=$( egrep -v '(^[[:space:]]*#|^[[:space:]]*$)' testplan.txt | tr '\012' ' ' )
 308
 309 echo "Starting Robot test suites ${SUITES} ..."
 310 pybot -N ${TESTPLAN} --removekeywords wuks -c critical -e exclude -e skip_if_${DISTROSTREAM} -v BUNDLEFOLDER:${BUNDLEFOLDER} -v WORKSPACE:/tmp \
 311 -v JAVA_HOME:${JAVA_HOME} -v BUNDLE_URL:${ACTUAL_BUNDLE_URL} -v NEXUSURL_PREFIX:${NEXUSURL_PREFIX} \
 312 -v CONTROLLER:${ODL_SYSTEM_IP} -v ODL_SYSTEM_IP:${ODL_SYSTEM_IP} -v ODL_SYSTEM_1_IP:${ODL_SYSTEM_IP} \
 313 -v CONTROLLER_USER:${USER} -v ODL_SYSTEM_USER:${USER} \
 314 -v TOOLS_SYSTEM_IP:${TOOLS_SYSTEM_IP} -v TOOLS_SYSTEM_2_IP:${TOOLS_SYSTEM_2_IP} -v TOOLS_SYSTEM_3_IP:${TOOLS_SYSTEM_3_IP} \
 315 -v TOOLS_SYSTEM_4_IP:${TOOLS_SYSTEM_4_IP} -v TOOLS_SYSTEM_5_IP:${TOOLS_SYSTEM_5_IP} -v TOOLS_SYSTEM_6_IP:${TOOLS_SYSTEM_6_IP} \
 316 -v TOOLS_SYSTEM_USER:${USER} -v JDKVERSION:${JDKVERSION} -v ODL_STREAM:${DISTROSTREAM} -v NUM_ODL_SYSTEM:${NUM_ODL_SYSTEM} \
 317 -v MININET:${TOOLS_SYSTEM_IP} -v MININET1:${TOOLS_SYSTEM_2_IP} -v MININET2:${TOOLS_SYSTEM_3_IP} \
 318 -v MININET3:${TOOLS_SYSTEM_4_IP} -v MININET4:${TOOLS_SYSTEM_5_IP} -v MININET5:${TOOLS_SYSTEM_6_IP} \
 319 -v MININET_USER:${USER} -v USER_HOME:${HOME} ${TESTOPTIONS} ${SUITES} || true
 320 # FIXME: Sort (at least -v) options alphabetically.
 321
 322 echo "Examining the files in data/log and checking filesize"
 323 ssh ${ODL_SYSTEM_IP} "ls -altr /tmp/${BUNDLEFOLDER}/data/log/"
 324 ssh ${ODL_SYSTEM_IP} "du -hs /tmp/${BUNDLEFOLDER}/data/log/*"
 325
 326 for i in `seq 1 ${NUM_ODL_SYSTEM}`
 327 do
 328     CONTROLLERIP=ODL_SYSTEM_${i}_IP
 329     echo "Lets's take the karaf thread dump again..."
 330     ssh ${!CONTROLLERIP} "sudo ps aux" > ${WORKSPACE}/ps_after.log
 331     pid=$(grep org.apache.karaf.main.Main ${WORKSPACE}/ps_after.log | grep -v grep | tr -s ' ' | cut -f2 -d' ')
 332     echo "karaf main: org.apache.karaf.main.Main, pid:${pid}"
 333     ssh ${!CONTROLLERIP} "jstack ${pid}" > ${WORKSPACE}/karaf_${i}_${pid}_threads_after.log || true
 334     echo "Killing ODL"
 335     set +e  # We do not want to create red dot just because something went wrong while fetching logs.
 336     ssh "${!CONTROLLERIP}" bash -c 'ps axf | grep karaf | grep -v grep | awk '"'"'{print "kill -9 " $1}'"'"' | sh'
 337 done
 338
 339 sleep 5
 340 # FIXME: Unify the copy process between various scripts.
 341 # TODO: Use rsync.
 342 for i in `seq 1 ${NUM_ODL_SYSTEM}`
 343 do
 344     CONTROLLERIP=ODL_SYSTEM_${i}_IP
 345     echo "Compressing karaf.log ${i}"
 346     ssh ${!CONTROLLERIP} gzip --best /tmp/${BUNDLEFOLDER}/data/log/karaf.log
 347     echo "Fetching compressed karaf.log ${i}"
 348     scp "${!CONTROLLERIP}:/tmp/${BUNDLEFOLDER}/data/log/karaf.log.gz" "odl${i}_karaf.log.gz" && ssh ${!CONTROLLERIP} rm -f "/tmp/${BUNDLEFOLDER}/data/log/karaf.log.gz"
 349     # TODO: Should we compress the output log file as well?
 350     scp "${!CONTROLLERIP}:/tmp/${BUNDLEFOLDER}/data/log/karaf_console.log" "odl${i}_karaf_console.log" && ssh ${!CONTROLLERIP} rm -f "/tmp/${BUNDLEFOLDER}/data/log/karaf_console.log"
 351     echo "Fetch GC logs"
 352     # FIXME: Put member index in filename, instead of directory name.
 353     mkdir -p "gclogs-${i}"
 354     scp "${!CONTROLLERIP}:/tmp/${BUNDLEFOLDER}/data/log/*.log" "gclogs-${i}/" && ssh ${!CONTROLLERIP} rm -f "/tmp/${BUNDLEFOLDER}/data/log/*.log"
 355 done
 356
 357 echo "Examine copied files"
 358 ls -lt
 359
 360 true  # perhaps Jenkins is testing last exit code
 361
 362 # vim: ts=4 sw=4 sts=4 et ft=sh :