3 # lispd example config file
8 # General configuration
9 # debug: Debug levels [0..3]
10 # map-request-retries: Additional Map-Requests to send per map cache miss
13 map-request-retries = 2
15 # RLOC Probing configuration
16 # rloc-probe-interval: interval at which periodic RLOC probes are sent
17 # (seconds). A value of 0 disables RLOC Probing
18 # rloc-probe-retries: RLOC Probe retries before setting the locator with
20 # rloc-probe-retries-interval: interval at which RLOC probes retries are
21 # sent (seconds) [1..#rloc-probe-interval]
24 rloc-probe-interval = 0
25 rloc-probe-retries = 2
26 rloc-probe-retries-interval = 5
29 # NAT Traversal configuration.
30 # nat_aware: check if the node is behind NAT
31 # site_ID: 64 bits to identify the site which the node is connected to. In
33 # xTR_ID: 128 bits to identify the xTR inside the site. In hexadecimal
34 # Limitation of version 0.3.3 when nat_aware is enabled:
35 # - Only one interface is supported.
36 # - Only one Map Server and one Map Resolver
40 site_ID = 0000000000000001 #In doubt, keep the default value
41 xTR_ID = 00000000000000000000000000000001 #In doubt, keep the default value
44 # Encapsulated Map-Requests are sent to this map-resolver
45 # You can define several map-resolvers. Encapsulated Map-Request messages will
46 # be sent to only one.
47 # address: IPv4 or IPv6 address of the map resolver
48 map-resolver = {10.33.12.32}
50 # Map-Registers are sent to this map-server
51 # You can define several map-servers. Map-Register messages will be sent to all
53 # address: IPv4 or IPv6 address of the map-server
54 # key-type: Only 1 supported (HMAC-SHA-1-96)
55 # key: password to authenticate with the map-server
56 # proxy-reply [on/off]: Configure map-server to Map-Reply on behalf of the xTR
65 # Packets addressed to non-LISP sites will be encapsulated to this Proxy-ETR
66 # You can define several Proxy-ETR. Traffic will be balanced according to
67 # priority and weight.
68 # address: IPv4 or IPv6 address of the Proxy-ETR
69 # priority [0-255]: Proxy-ETR with lower values are more preferable.
70 # weight [0-255]: When priorities are the same for multiple Proxy-ETRs,
71 # the Weight indicates how to balance unicast traffic between them.
73 # address = 10.10.10.10
78 # IPv4 / IPv6 EID of the node.
79 # One database-mapping structure is defined for each interface with RLOCs
80 # associated to this EID
81 # eid-prefix: EID prefix (IPvX/mask) of the mapping
82 # interface: interface containing the RLOCs associated to this mapping
83 # priority_vX [0-255]: Priority for the IPvX RLOC of the interface. Locators
84 # with lower values are more preferable. This is used for both incoming
85 # policy announcements and outcoming traffic policy management. (A value
86 # of -1 means that IPvX address of that interface is not used)
87 # weight [0-255]: When priorities are the same for multiple RLOCs, the Weight
88 # indicates how to balance unicast traffic between them.
91 eid-prefix = 2.2.2.2/32
93 priority_v4 = 1 # Priority of IPv4 locator of the interface eth0 for this EID
94 weight_v4 = 100 # Weight of IPv4 locator of the interface eth0 for this EID
95 priority_v6 = 1 # Priority of IPv6 locator of the interface eth0 for this EID
96 weight_v6 = 100 # Weight of IPv6 locator of the interface eth0 for this EID
99 # List of PITRs to SMR on handover
100 # address: IPv4 or IPv6 address of the Proxy-ITR
106 # Current LISP beta-network (lisp4.net/lisp6.net) PITR addresses
107 # Uncomment the IPv4 or IPv6 list based on your current locators and
108 # comment the previous 'proxy-itrs' section
110 # LISP beta-network IPv4 PITRs
112 # 69.31.31.98, # eqx-ash-pxtr
113 # 149.20.48.60, # isc-pxtr
114 # 198.6.255.37, # asp-pxtr
115 # 173.36.193.25, # sjc-pxtr
116 # 129.250.1.63, # ntt-amer-pxtr
117 # 217.8.98.33, # intouch-pxtr-1
118 # 217.8.98.35, # intouch-pxtr-2
119 # 193.162.145.46, # tdc-pxtr
120 # 158.38.1.92, # uninett-pxtr
121 # 203.181.249.172, # apan-pxtr
122 # 202.51.247.10 # sg-nus-pxtr
125 # LISP beta-network IPv6 PITRs
128 # 2001:590::451f:1f62, # eqx-ash-pxtr
129 # 2001:4f8:3:d::60, # isc-pxtr
130 # 2001:418:4:1:deaf:bebe::10d, # asp-pxtr
131 # 2001:418:0:1000::613, # ntt-amer-pxtr
132 # 2001:200:e000:17::17, # intouch-pxtr-1
133 # 2001:67C:21B4:108::b, # intouch-pxtr-2
134 # 2001:6c8:41:100:0:2:1:c, # tdc-pxtr
135 # 2001:700:0:52E::4, # uninett-pxtr
136 # 2001:67C:21B4:107::b # apan-pxtr