3 envlist = buildcontroller,testsPCE,sims121,tests121,sims221,tests221,sims71,tests71,tests_hybrid
13 passenv = USE_LIGHTY http_proxy HTTP_PROXY https_proxy HTTPS_PROXY no_proxy NO_PROXY
19 -r{toxinidir}/tests/requirements.txt
20 -r{toxinidir}/tests/test-requirements.txt
22 changedir = {toxinidir}/tests
23 parallel_show_output = true
25 [testenv:buildcontroller]
26 whitelist_externals = sh
29 #install maven and JDK11 on the Gate since they are not there by default
30 sh -c "which mvn >/dev/null || ./installMavenCentOS.sh"
31 #install honeynode 1.2.1 simulators
32 #patch OLM constant to speed up tests, unnecessary for PCE tests
33 sh -c "sed -i'_' 's@=.*//#FUNCTESTVAL=@=@g' ../olm/src/main/java/org/opendaylight/transportpce/olm/util/OlmUtils.java"
34 sh -c 'if [ "$USE_LIGHTY" != "True" ]; then (cd ../; for suffix in 121 221 71; do rm -rf "karaf$suffix"; cp -r karaf "karaf$suffix";done) ; fi'
35 #build controller, source JDK_JAVA_OPTIONS to remove illegal reflective acces warnings introduced by Java11
36 sh -c ". $PWD/reflectwarn.sh && cd .. && mvn clean install -B -q -s tests/odl_settings.xml -DskipTests -Dmaven.javadoc.skip=true -Dodlparent.spotbugs.skip -Dodlparent.checkstyle.skip"
37 sh -c "mv ../olm/src/main/java/org/opendaylight/transportpce/olm/util/OlmUtils.java_ ../olm/src/main/java/org/opendaylight/transportpce/olm/util/OlmUtils.java"
38 #patch Karaf exec for the same reason at runtime and also to have the possibility to use alternative ports
39 sh -c "../karaf/target/assembly/ressources/post_install_for_tests.sh"
40 #build Lighty if needed
41 sh -c 'if [ "$USE_LIGHTY" = "True" ]; then (cd ../lighty && ./build.sh); fi'
44 whitelist_externals = sh
45 depends = buildcontroller
46 # sims profiles does not strictly depends on buildcontroller
47 # but this dependency avoids race condition in the gate
49 - sh -c "./install_honeynode.sh 1.2.1"
52 whitelist_externals = sh
53 depends = buildcontroller
55 - sh -c "./install_honeynode.sh 2.2.1"
58 whitelist_externals = sh
59 depends = buildcontroller
61 - sh -c "./install_honeynode.sh 7.1"
64 depends = buildcontroller
65 whitelist_externals = launch_tests.sh
66 passenv = LAUNCHER USE_LIGHTY
68 ./launch_tests.sh pce {posargs:}
71 depends = buildcontroller,sims121,testsPCE
72 # testsPCE dependency is only here to chain tests in the gate and avoid resources starvation
73 whitelist_externals = launch_tests.sh
77 USE_ODL_ALT_WEBSOCKET_PORT=8186
78 USE_ODL_ALT_AKKA_PORT=2551
79 USE_ODL_ALT_AKKA_MGT_PORT=8559
80 USE_ODL_ALT_SHELL_PORT=8102
81 USE_ODL_ALT_RMI_REGISTRY_PORT=1100
82 USE_ODL_ALT_RMI_SERVER_PORT=44445
83 USE_ODL_ALT_RESTCONF_PORT=8182
84 USE_ODL_ALT_KARAF_INSTALL_DIR=karaf121
86 ./launch_tests.sh 1.2.1 {posargs:}
87 # By default, all tests in the folder transportpce_tests/1.2.1/ are run.
88 # Though, a restricted list of tests can be passed as argument to 'tox -e tests121'.
89 # For example, 'tox -e tests121 portmapping' will run only the portmapping test.
90 # and 'tox -e tests121 "portmapping pce"' will run the portmapping and pce tests.
91 # Additionnally, a different launcher command than 'nosetests --with-xunit' can be
92 # used by exporting the variable LAUNCHER. For example 'export LAUNCHER="python3"'
93 # which is more verbose than nose or 'export LAUNCHER="ls -l"' to only list script
97 depends = buildcontroller,sims221,tests71
98 # tests71 dependency is only here to chain tests in the gate and avoid ressources starvation
99 whitelist_externals = launch_tests.sh
103 USE_ODL_ALT_WEBSOCKET_PORT=8187
104 USE_ODL_ALT_AKKA_PORT=2552
105 USE_ODL_ALT_AKKA_MGT_PORT=8560
106 USE_ODL_ALT_SHELL_PORT=8103
107 USE_ODL_ALT_RMI_REGISTRY_PORT=1101
108 USE_ODL_ALT_RMI_SERVER_PORT=44446
109 USE_ODL_ALT_RESTCONF_PORT=8183
110 USE_ODL_ALT_KARAF_INSTALL_DIR=karaf221
112 ./launch_tests.sh 2.2.1 {posargs:}
115 depends = buildcontroller,sims71
116 whitelist_externals = launch_tests.sh
120 USE_ODL_ALT_WEBSOCKET_PORT=8188
121 USE_ODL_ALT_AKKA_PORT=2553
122 USE_ODL_ALT_AKKA_MGT_PORT=8561
123 USE_ODL_ALT_SHELL_PORT=8104
124 USE_ODL_ALT_RMI_REGISTRY_PORT=1102
125 USE_ODL_ALT_RMI_SERVER_PORT=44447
126 USE_ODL_ALT_RESTCONF_PORT=8184
127 USE_ODL_ALT_KARAF_INSTALL_DIR=karaf71
129 ./launch_tests.sh 7.1 {posargs:}
131 [testenv:tests_hybrid]
132 depends = buildcontroller,sims121,sims221,sims71,tests121,tests221,tests71
133 #the last dependency is to avoid temporarily concurrent ressources problem in parallel mode
134 whitelist_externals = launch_tests.sh
138 USE_ODL_ALT_WEBSOCKET_PORT=8186
139 USE_ODL_ALT_AKKA_PORT=2551
140 USE_ODL_ALT_AKKA_MGT_PORT=8559
141 USE_ODL_ALT_SHELL_PORT=8102
142 USE_ODL_ALT_RMI_REGISTRY_PORT=1100
143 USE_ODL_ALT_RMI_SERVER_PORT=44445
144 USE_ODL_ALT_RESTCONF_PORT=8182
145 USE_ODL_ALT_KARAF_INSTALL_DIR=karaf121
147 # nosetests --with-xunit transportpce_tests/hybrid/test01_device_change_notifications.py
148 ./launch_tests.sh hybrid {posargs:}
151 depends = buildcontroller
152 whitelist_externals = sh
155 #sudo docker pull atriki/gnpyrest:v1.2
156 sudo docker run -d -p 8008:5000 --name gnpy_tpce_rest1 atriki/gnpyrest:v1.2
157 nosetests --with-xunit transportpce_tests/with_docker/test_gnpy.py
158 sudo docker container rm -f gnpy_tpce_rest1
160 [testenv:nbinotifications]
161 depends = buildcontroller,sims221
162 whitelist_externals = sh
165 sudo docker-compose -f ./nbinotifications/docker-compose.yml up -d
166 nosetests --with-xunit transportpce_tests/with_docker/test_nbinotifications.py
167 sudo docker-compose -f ./nbinotifications/docker-compose.yml down --rmi all
170 passenv = http_proxy HTTP_PROXY https_proxy HTTPS_PROXY no_proxy NO_PROXY
172 deps = -rdocs/requirements.txt
174 sphinx-build -q -W -b html -n -d {envtmpdir}/doctrees ../docs/ {toxinidir}/docs/_build/html
176 [testenv:docs-linkcheck]
177 passenv = http_proxy HTTP_PROXY https_proxy HTTPS_PROXY no_proxy NO_PROXY
179 deps = -rdocs/requirements.txt
180 commands = sphinx-build -q -b linkcheck -d {envtmpdir}/doctrees ../docs/ {toxinidir}/docs/_build/linkcheck
182 [testenv:checkbashisms]
184 whitelist_externals = sh
189 sh -c 'command checkbashisms>/dev/null || sudo yum install devscripts-minimal || (echo "checkbashisms command not found - please install it (e.g. sudo apt-get install devscripts | yum install devscripts-minimal )" >&2 && exit 1)'
190 find . -not -path '*/\.*' -name *.sh -exec checkbashisms -f \{\} +
195 -rdocs/requirements.txt
196 sphinxcontrib-spelling
198 commands = sphinx-build -b spelling -d {envtmpdir}/doctrees ../docs/ {toxinidir}/docs/_build/spelling
204 autopep8 --max-line-length 120 --in-place --recursive transportpce_tests/
209 whitelist_externals = find
211 find transportpce_tests/ -name *.py -exec pylint --max-line-length=120 --disable=missing-docstring --method-rgx="(([a-z_][a-zA-Z0-9_]{2,})|(_[a-z0-9_]*)|(__[a-zA-Z][a-zA-Z0-9_]+__))$" --variable-rgx="[a-zA-Z_][a-zA-Z0-9_]{1,30}$" --reports=y --score=y --output-format=colorized \{\} +
216 whitelist_externals = find
219 find ../api/ -name target -prune -o -name *.yang -exec pyang --lint --canonical --max-line-length=120 -p../api/src/main/yang/:../ordmodels/common/src/main/yang/:../ordmodels/service/src/main/yang/:../tapimodels/src/main/yang/ \{\} +
220 #find ../api/ ../ordmodels/ ../tapimodels/ -name target -prune -o -name *.yang -exec pyang --lint --canonical --max-line-length=120 -p../api/src/main/yang/:../ordmodels/common/src/main/yang/:../ordmodels/service/src/main/yang/:../tapimodels/src/main/yang/ \{\} +
222 [testenv:pyangformat]
225 whitelist_externals = sh
228 sh -c 'find ../api/ -name target -prune -o -name *.yang -print | while read -r fname; do pyang -f yang --yang-canonical --yang-remove-unused-imports --max-line-length=120 --keep-comments -p../api/src/main/yang/:../ordmodels/common/src/main/yang/:../ordmodels/service/src/main/yang/:../tapimodels/src/main/yang/ "$fname" -o /tmp/tmpfile.$$ && mv /tmp/tmpfile.$$ "$fname";done'
230 [testenv:pre-commit-install]
235 pre-commit install --hook-type commit-msg
237 [testenv:pre-commit-uninstall]
242 pre-commit uninstall --hook-type commit-msg
249 pre-commit run --all-files --show-diff-on-failure
250 pre-commit run gitlint --hook-stage commit-msg --commit-msg-filename .git/COMMIT_EDITMSG
251 # Gitlint only proposes a pre-commit configuration for the commit-msg stage but none for the commit stage.
252 # Its default arguments --passed and --msg-filename are different from CI recommandations.
253 # As a result, the line above is always skipped in jenkins CI since there cannot be a .git/COMMIT_EDITMSG file.
254 # A dedicated gitlint profile for CI is proposed below. Also to behave fine locally, this profile must have access
255 # to the HOME variable so that Gitlint can retrieve Git user settings.