* 1. get-pm This operation traverse through current PM list and gets PM for * given NodeId and Resource name * * @param input * Input parameter from the olm yang model * * @return Result of the request */ GetPmOutput getPm(GetPmInput input); /** * This method is the implementation of the 'service-power-setup'. * *
* 1. service-power-setup: This operation performs following steps: * Step1: Calculate Spanloss on all links which are part of service. * TODO Step2: Calculate power levels for each Tp-Id * TODO Step3: Post power values on roadm connections * * @param input * Input parameter from the olm yang model * Input will contain nodeId and termination point * * @return Result of the request */ ServicePowerSetupOutput servicePowerSetup(ServicePowerSetupInput input); /** * This method is the implementation of the 'service-power-trundown'. * *
* 1. service-power-turndown: This operation performs following steps: * Step1: For each TP within Node sets interface outofservice . * Step2: For each roam-connection sets power to -60dbm * Step3: Turns power mode off * * @param input * Input parameter from the olm yang model * Input will contain nodeId and termination point * * @return Result of the request */ ServicePowerTurndownOutput servicePowerTurndown(ServicePowerTurndownInput input); /** * This method calculates Spanloss for all Roadm to Roadm links, * part of active inventory in Network Model or for newly added links * based on input src-type. * *
* 1. Calculate-Spanloss-Base: This operation performs following steps: * Step1: Read all Roadm-to-Roadm links from network model or get data for given linkID. * Step2: Retrieve PMs for each end point for OTS interface * Step3: Calculates Spanloss * Step4: Posts calculated spanloss in Device and in network model * * @param input * Input parameter from the olm yang model * Input will contain SourceType and linkId if srcType is Link * * @return Result of the request */ CalculateSpanlossBaseOutput calculateSpanlossBase(CalculateSpanlossBaseInput input); CalculateSpanlossCurrentOutput calculateSpanlossCurrent( CalculateSpanlossCurrentInput input); ServicePowerResetOutput servicePowerReset(ServicePowerResetInput input); }