[tox]
minversion = 3.7.0
-envlist = buildcontroller,sims121,tests121,sims221,tests221,sims71,tests71,tests_hybrid
+envlist = buildcontroller,testsPCE,
+ sims121,build_karaf_tests121,tests121,
+ sims221,build_karaf_tests221,tests221,tests_tapi,
+ sims71,build_karaf_tests71,tests71,
+ build_karaf_tests_hybrid,tests_hybrid,
docs
docs-linkcheck
checkbashisms
pre-commit
- gitlint
+ pylint
skipsdist = true
setupdir = tests/
[testenv]
-passenv = USE_LIGHTY http_proxy HTTP_PROXY https_proxy HTTPS_PROXY no_proxy NO_PROXY
+passenv = USE_LIGHTY http_proxy HTTP_PROXY https_proxy HTTPS_PROXY no_proxy NO_PROXY OLM_TIMER1 OLM_TIMER2
setenv =
- USE_LIGHTY = True
+# USE_LIGHTY=True
+ OLM_TIMER1=3000
+ OLM_TIMER2=2000
+
usedevelop = true
basepython = python3
deps =
parallel_show_output = true
[testenv:buildcontroller]
-whitelist_externals = sh
- sudo
+whitelist_externals = build_controller.sh
commands =
-#install maven and JDK11 on the Gate since they are not there by default
- sh -c "which mvn >/dev/null || ./installMavenCentOS.sh"
-#install honeynode 1.2.1 simulators
-#patch OLM constant to speed up tests, unnecessary for PCE tests
- sh -c "sed -i'_' 's@=.*//#FUNCTESTVAL=@=@g' ../olm/src/main/java/org/opendaylight/transportpce/olm/util/OlmUtils.java"
-#build controller, source JDK_JAVA_OPTIONS to remove illegal reflective acces warnings introduced by Java11
- sh -c ". $PWD/reflectwarn.sh && cd .. && mvn clean install -B -q -s tests/odl_settings.xml -DskipTests -Dmaven.javadoc.skip=true -Dodlparent.spotbugs.skip -Dodlparent.checkstyle.skip"
- sh -c "mv ../olm/src/main/java/org/opendaylight/transportpce/olm/util/OlmUtils.java_ ../olm/src/main/java/org/opendaylight/transportpce/olm/util/OlmUtils.java"
-#patch Karaf exec for the same reason at runtime
- sh -c "sed -i'_' 's@!/bin/sh@!/bin/sh\'$'\n. $(dirname $0)/../../../../tests/reflectwarn.sh@' ../karaf/target/assembly/bin/karaf"
- # the following command would be the straight and right way to support both BSD and GNU sed versions
- # sh -c "sed -i'_' '1 a\'$'\n. \$(dirname \$0)/\.\./\.\./\.\./\.\./tests/reflectwarn.sh\n' ../karaf/target/assembly/bin/karaf"
- # but tox reinterprets the quotes as
- # sh -c 'sed -i'"'"'_'"'"' '"'"'1 a\'"'"'$'"'"'\n. \$(dirname \$0)/\.\./\.\./\.\./\.\./tests/reflectwarn.sh\n'"'"' ../karaf/target/assembly/bin/karaf'
- # ,what results in an unexpected different formating (with a $ on the second line and the dot on the third)
-#build Lighty if needed
- sh -c 'if [ "$USE_LIGHTY" = "True" ]; then (cd ../lighty && ./build.sh); fi'
+ ./build_controller.sh
[testenv:sims121]
-whitelist_externals = sh
+whitelist_externals = install_honeynode.sh
depends = buildcontroller
# sims profiles does not strictly depends on buildcontroller
# but this dependency avoids race condition in the gate
commands =
- - sh -c "./install_honeynode.sh 1.2.1"
+ ./install_honeynode.sh 1.2.1
[testenv:sims221]
-whitelist_externals = sh
+whitelist_externals = install_honeynode.sh
depends = buildcontroller
commands =
- - sh -c "./install_honeynode.sh 2.2.1"
+ ./install_honeynode.sh 2.2.1
[testenv:sims71]
-whitelist_externals = sh
+whitelist_externals = install_honeynode.sh
+depends = buildcontroller
+commands =
+ ./install_honeynode.sh 7.1
+
+[testenv:testsPCE]
+depends = buildcontroller
+#the following lines retrieve unofficial package of GNPy with REST support from Orange opensource Gitlab repo
+setenv =
+ PIP_EXTRA_INDEX_URL = https://gitlab.com/api/v4/projects/33090323/packages/pypi/simple
+# USE_LIGHTY=True
+# USE_ODL_RESTCONF_VERSION=draft-bierman02
+deps =
+ -r{toxinidir}/tests/requirements.txt
+ -r{toxinidir}/tests/test-requirements.txt
+ setuptools>=7.0
+ gnpy4tpce==2.4.7
+whitelist_externals = launch_tests.sh
+passenv = LAUNCHER USE_LIGHTY USE_ODL_RESTCONF_VERSION
+basepython = python3
+commands =
+ ./launch_tests.sh pce {posargs:}
+
+[testenv:build_karaf_tests121]
depends = buildcontroller
+# testsPCE dependency is only here to chain tests in the gate and avoid resources starvation
+whitelist_externals = launch_tests.sh
+passenv = LAUNCHER USE_LIGHTY
+setenv =
+# USE_LIGHTY=True
+ USE_ODL_ALT_KARAF_ENV=./karaf121.env
+ USE_ODL_ALT_KARAF_INSTALL_DIR=karaf121
commands =
- - sh -c "./install_honeynode.sh 7.1"
+ ./build_karaf_for_tests.sh
[testenv:tests121]
-depends = buildcontroller,sims121
+depends = buildcontroller,build_karaf_tests121,sims121,testsPCE
+# testsPCE dependency is only here to chain tests in the gate and avoid resources starvation
+whitelist_externals = launch_tests.sh
+passenv = LAUNCHER USE_LIGHTY USE_ODL_RESTCONF_VERSION
+setenv =
+# USE_LIGHTY=True
+# USE_ODL_RESTCONF_VERSION=draft-bierman02
+ USE_ODL_ALT_KARAF_ENV=./karaf121.env
+ USE_ODL_ALT_KARAF_INSTALL_DIR=karaf121
commands =
- nosetests --with-xunit transportpce_tests/1.2.1/test_portmapping.py
- nosetests --with-xunit transportpce_tests/1.2.1/test_topo_portmapping.py
- nosetests --with-xunit transportpce_tests/1.2.1/test_topology.py
- nosetests --with-xunit transportpce_tests/1.2.1/test_renderer_service_path_nominal.py
- nosetests --with-xunit transportpce_tests/1.2.1/test_pce.py
- nosetests --with-xunit transportpce_tests/1.2.1/test_olm.py
- nosetests --with-xunit transportpce_tests/1.2.1/test_end2end.py
+ ./launch_tests.sh 1.2.1 {posargs:}
+# By default, all tests in the folder transportpce_tests/1.2.1/ are run.
+# Though, a restricted list of tests can be passed as argument to 'tox -e tests121'.
+# For example, 'tox -e tests121 portmapping' will run only the portmapping test.
+# and 'tox -e tests121 "portmapping pce"' will run the portmapping and pce tests.
+# Additionnally, a different launcher command than 'nosetests --with-xunit' can be
+# used by exporting the variable LAUNCHER. For example 'export LAUNCHER="python3"'
+# which is more verbose than nose or 'export LAUNCHER="ls -l"' to only list script
+# files attributes.
+
+[testenv:build_karaf_tests221]
+depends = buildcontroller
+# testsPCE dependency is only here to chain tests in the gate and avoid resources starvation
+whitelist_externals = launch_tests.sh
+passenv = LAUNCHER USE_LIGHTY
+setenv =
+# USE_LIGHTY=True
+ USE_ODL_ALT_KARAF_ENV=./karaf221.env
+ USE_ODL_ALT_KARAF_INSTALL_DIR=karaf221
+commands =
+ ./build_karaf_for_tests.sh
[testenv:tests221]
-depends = buildcontroller,sims221,tests121
-#the last dependency is to avoid temporarily concurrent ressources problem to fix in parallel mode
-commands =
- nosetests --with-xunit transportpce_tests/2.2.1/test_portmapping.py
- nosetests --with-xunit transportpce_tests/2.2.1/test_topology.py
- nosetests --with-xunit transportpce_tests/2.2.1/test_otn_topology.py
- nosetests --with-xunit transportpce_tests/2.2.1/test_flex_grid.py
- nosetests --with-xunit transportpce_tests/2.2.1/test_renderer_service_path_nominal.py
- nosetests --with-xunit transportpce_tests/2.2.1/test_otn_renderer.py
- nosetests --with-xunit transportpce_tests/2.2.1/test_otn_sh_renderer.py
- nosetests --with-xunit transportpce_tests/2.2.1/test_olm.py
- nosetests --with-xunit transportpce_tests/2.2.1/test_tapi.py
- nosetests --with-xunit transportpce_tests/2.2.1/test_otn_end2end.py
- nosetests --with-xunit transportpce_tests/2.2.1/test_end2end.py
+depends = buildcontroller,build_karaf_tests221,sims221,tests71
+# tests71 dependency is only here to chain tests in the gate and avoid ressources starvation
+whitelist_externals = launch_tests.sh
+passenv = LAUNCHER USE_LIGHTY USE_ODL_RESTCONF_VERSION
+setenv =
+# USE_LIGHTY=True
+# USE_ODL_RESTCONF_VERSION=draft-bierman02
+ USE_ODL_ALT_KARAF_ENV=./karaf221.env
+ USE_ODL_ALT_KARAF_INSTALL_DIR=karaf221
+commands =
+ ./launch_tests.sh 2.2.1 {posargs:}
+
+[testenv:build_karaf_tests71]
+depends = buildcontroller
+# testsPCE dependency is only here to chain tests in the gate and avoid resources starvation
+whitelist_externals = launch_tests.sh
+passenv = LAUNCHER USE_LIGHTY
+setenv =
+# USE_LIGHTY=True
+ USE_ODL_ALT_KARAF_ENV=./karaf71.env
+ USE_ODL_ALT_KARAF_INSTALL_DIR=karaf71
+commands =
+ ./build_karaf_for_tests.sh
[testenv:tests71]
-depends = buildcontroller,sims71,tests221
-#the last dependency is to avoid temporarily concurrent ressources problem to fix in parallel mode
+depends = buildcontroller,build_karaf_tests71,sims71,tests_tapi
+whitelist_externals = launch_tests.sh
+passenv = LAUNCHER USE_LIGHTY USE_ODL_RESTCONF_VERSION
+setenv =
+# USE_LIGHTY=True
+# USE_ODL_RESTCONF_VERSION=draft-bierman02
+ USE_ODL_ALT_KARAF_ENV=./karaf71.env
+ USE_ODL_ALT_KARAF_INSTALL_DIR=karaf71
+commands =
+ ./launch_tests.sh 7.1 {posargs:}
+
+[testenv:build_karaf_tests_hybrid]
+depends = buildcontroller
+whitelist_externals = launch_tests.sh
+passenv = LAUNCHER USE_LIGHTY
+setenv =
+# USE_LIGHTY=True
+ USE_ODL_ALT_KARAF_ENV=./karaf121.env
+ USE_ODL_ALT_KARAF_INSTALL_DIR=karaf_hybrid
commands =
- nosetests --with-xunit transportpce_tests/7.1/test_pce_400G.py
- #NB: test pce_400G above does not depend on sims71
- nosetests --with-xunit transportpce_tests/7.1/test_portmapping.py
+ ./build_karaf_for_tests.sh
[testenv:tests_hybrid]
-depends = buildcontroller,sims121,sims221,sims71,tests71
-#the last dependency is to avoid temporarily concurrent ressources problem to fix in parallel mode
+depends = buildcontroller,build_karaf_tests_hybrid,sims121,sims221,sims71,tests121,tests221,tests71
+#the last dependency is to avoid temporarily concurrent ressources problem in parallel mode
+whitelist_externals = launch_tests.sh
+passenv = LAUNCHER USE_LIGHTY USE_ODL_RESTCONF_VERSION
+setenv =
+# USE_LIGHTY=True
+# USE_ODL_RESTCONF_VERSION=draft-bierman02
+ USE_ODL_ALT_KARAF_ENV=./karaf121.env
+ USE_ODL_ALT_KARAF_INSTALL_DIR=karaf_hybrid
commands =
- nosetests --with-xunit transportpce_tests/hybrid/test_device_change_notifications.py
+# nosetests --with-xunit transportpce_tests/hybrid/test01_device_change_notifications.py
+ ./launch_tests.sh hybrid {posargs:}
+
+[testenv:tests_tapi]
+depends = buildcontroller,build_karaf_tests221,sims221
+whitelist_externals = launch_tests.sh add_tapi_feature_to_tests221.sh
+passenv = LAUNCHER USE_LIGHTY OLM_TIMER1 OLM_TIMER2 USE_ODL_RESTCONF_VERSION
+setenv =
+# USE_LIGHTY=True
+# USE_ODL_RESTCONF_VERSION=draft-bierman02
+ USE_ODL_ALT_KARAF_ENV=./karaf221.env
+ USE_ODL_ALT_KARAF_INSTALL_DIR=karaf221
+ INSTALL_TAPI=True
+ OLM_TIMER1=3000
+ OLM_TIMER2=2000
-[testenv:gnpy]
-depends = buildcontroller
-whitelist_externals = sh
- sudo
commands =
- #sudo docker pull atriki/gnpyrest:v1.2
- sudo docker run -d -p 8008:5000 --name gnpy_tpce_rest1 atriki/gnpyrest:v1.2
- nosetests --with-xunit transportpce_tests/1.2.1/test_gnpy.py
- sudo docker container rm -f gnpy_tpce_rest1
+ ./add_tapi_feature_to_tests221.sh
+ ./launch_tests.sh tapi {posargs:}
-[testenv:nbinotifications]
+[testenv:with_docker]
depends = buildcontroller,sims221
-whitelist_externals = sh
- sudo
+whitelist_externals = launch_tests.sh
+ dockercmd.sh
+passenv = LAUNCHER USE_LIGHTY USE_ODL_RESTCONF_VERSION OLM_TIMER1 OLM_TIMER2
+setenv =
+ OLM_TIMER1=3000
+ OLM_TIMER2=2000
+ INSTALL_TAPI=True
+ INSTALL_NBINOTIFICATIONS=True
+# USE_ODL_RESTCONF_VERSION=draft-bierman02
+
commands =
- sudo docker-compose -f ./nbinotifications/docker-compose.yml up -d
- nosetests --with-xunit transportpce_tests/2.2.1/test_nbinotifications.py
- sudo docker-compose -f ./nbinotifications/docker-compose.yml down --rmi all
+ ./dockercmd.sh run -d -p 2181:2181 -p 9092:9092 --env ADVERTISED_LISTENERS=PLAINTEXT://localhost:9092 --name tpce_kafka1 teivah/kafka:2.0.0
+ ./launch_tests.sh with_docker {posargs:}
+ ./dockercmd.sh container rm -f tpce_kafka1
[testenv:docs]
passenv = http_proxy HTTP_PROXY https_proxy HTTPS_PROXY no_proxy NO_PROXY
basepython = python3
deps = -rdocs/requirements.txt
commands =
- sphinx-build -q -W -b html -n -d {envtmpdir}/doctrees ../docs/ {toxinidir}/docs/_build/html
+ sphinx-build -q -W --keep-going -b html -n -d {envtmpdir}/doctrees ../docs/ {toxinidir}/docs/_build/html
[testenv:docs-linkcheck]
passenv = http_proxy HTTP_PROXY https_proxy HTTPS_PROXY no_proxy NO_PROXY
sudo
find
commands =
- sh -c 'command checkbashisms>/dev/null || sudo yum install devscripts-minimal || (echo "checkbashisms command not found - please install it (e.g. sudo apt-get install devscripts | yum install devscripts-minimal )" >&2 && exit 1)'
+ sh -c 'command checkbashisms>/dev/null || sudo yum install -y devscripts-checkbashisms || sudo yum install -y devscripts-minimal || sudo yum install -y devscripts \
+ || sudo yum install -y https://archives.fedoraproject.org/pub/archive/fedora/linux/releases/31/Everything/x86_64/os/Packages/d/devscripts-checkbashisms-2.19.6-2.fc31.x86_64.rpm \
+ || (echo "checkbashisms command not found - please install it \
+ (e.g. sudo apt-get install devscripts | yum install devscripts-minimal )" >&2 && exit 1)'
find . -not -path '*/\.*' -name *.sh -exec checkbashisms -f \{\} +
[testenv:spelling]
-rdocs/requirements.txt
sphinxcontrib-spelling
PyEnchant
-commands = sphinx-build -b spelling -d {envtmpdir}/doctrees ../docs/ {toxinidir}/docs/_build/spelling
+commands = sphinx-build -b spelling -d {envtmpdir}/doctrees ../docs/ {toxinidir}/docs/_build/spelling
[testenv:autopep8]
basepython = python3
commands =
autopep8 --max-line-length 120 --in-place --recursive transportpce_tests/
+[testenv:pylint_full]
+basepython = python3
+deps = pylint>=2.6.0
+whitelist_externals = find
+commands =
+ find transportpce_tests/ -name *.py -exec pylint --fail-under=9.22 --max-line-length=120 --disable=missing-docstring --module-rgx="([a-z0-9_]+$)|([0-9.]{1,30}$)" --method-rgx="(([a-z_][a-zA-Z0-9_]{2,})|(_[a-z0-9_]*)|(__[a-zA-Z][a-zA-Z0-9_]+__))$" --variable-rgx="[a-zA-Z_][a-zA-Z0-9_]{1,30}$" --reports=y --score=y --output-format=colorized \{\} +
+
[testenv:pylint]
basepython = python3
-deps = pylint
+deps = pylint>=2.6.0
whitelist_externals = find
commands =
- find transportpce_tests/ -name *.py -exec pylint --max-line-length=120 --disable=missing-docstring --method-rgx="(([a-z_][a-zA-Z0-9_]{2,})|(_[a-z0-9_]*)|(__[a-zA-Z][a-zA-Z0-9_]+__))$" --variable-rgx="[a-zA-Z_][a-zA-Z0-9_]{1,30}$" --reports=y --score=y --output-format=colorized \{\} +
+ find transportpce_tests/ -name *.py -exec pylint --fail-under=10 --max-line-length=120 --disable=missing-docstring --disable=fixme --disable=duplicate-code --module-rgx="([a-z0-9_]+$)|([0-9.]{1,30}$)" --method-rgx="(([a-z_][a-zA-Z0-9_]{2,})|(_[a-z0-9_]*)|(__[a-zA-Z][a-zA-Z0-9_]+__))$" --variable-rgx="[a-zA-Z_][a-zA-Z0-9_]{1,30}$" \{\} +
[testenv:pyang]
basepython = python3
pre-commit uninstall
pre-commit uninstall --hook-type commit-msg
+[testenv:pre-commit-autoupdate]
+basepython = python3
+deps = pre-commit
+commands =
+ pre-commit autoupdate
+
[testenv:pre-commit]
basepython = python3
deps = pre-commit
passenv = HOME
commands =
pre-commit run --all-files --show-diff-on-failure
- pre-commit run gitlint --hook-stage commit-msg --commit-msg-filename .git/COMMIT_EDITMSG
- # Gitlint only proposes a pre-commit configuration for the commit-msg stage but none for the commit stage.
- # Its default arguments --passed and --msg-filename are different from CI recommandations.
- # As a result, the line above is always skipped in jenkins CI since there cannot be a .git/COMMIT_EDITMSG file.
- # A dedicated gitlint profile for CI is proposed below. Also to behave fine locally, this profile must have access
- # to the HOME variable so that Gitlint can retrieve Git user settings.
+ pre-commit run gitlint-ci --hook-stage manual
[testenv:gitlint]
basepython = python3
deps = gitlint
commands =
- gitlint
+ gitlint --config ../.gitlint
+
+[testenv:allure-report-init]
+basepython = python3
+deps = allure-pytest>=2.10.0
+# allure is under Apache License 2.0
+whitelist_externals =
+ mkdir
+ sed
+commands =
+ mkdir -p allure-report
+ sed -i_ '$a\allure-pytest # Apache License 2.0' ./test-requirements.txt
+
+
+[testenv:allure-report-serve]
+basepython = python3
+whitelist_externals =
+ allure
+commands =
+ allure serve "allure-report"