Renderer functional tests for 200G rate 31.6 Gbaud

[transportpce.git] / docs / user-guide.rst

diff --git a/docs/user-guide.rst b/docs/user-guide.rst
index 9f3966d41e9cfea051c4a472ebfe9191622d5fc3..f8ee5e8ba3e7bc49ba3e35a8d10f742fae13c61f 100644 (file)
--- a/docs/user-guide.rst
+++ b/docs/user-guide.rst
@@ -29,7 +29,7 @@ handler, Renderer responsible for the path configuration through optical
 equipment and Optical Line Management (OLM) is associated with a generic block
 relying on open models, each of them communicating through published APIs.
 
 equipment and Optical Line Management (OLM) is associated with a generic block
 relying on open models, each of them communicating through published APIs.
 

-.. figure:: ./images/TransportPCE-Diagramm-Magnesium.jpg
+.. figure:: ./images/TransportPCE-Diagram-Phosphorus.jpg

    :alt: TransportPCE architecture
 
    TransportPCE architecture
    :alt: TransportPCE architecture
 
    TransportPCE architecture


@@ -52,8 +52,18 @@ TransportPCE User-Facing Features
 
 -  **feature odl-transportpce-inventory**
 
 
 -  **feature odl-transportpce-inventory**
 

-   -  This feature is considered experimental.
-      It provides transportPCE an external connector to a MariaDB inventory currently limited to OpenROADM 1.2.1 devices.
+   -  This feature is considered experimental. It provides transportPCE with an external connector to
+      a MariaDB inventory currently limited to OpenROADM 1.2.1 devices.
+
+-  **feature odl-transportpce-dmaap-client**
+
+   -  This feature is considered experimental. It provides a REST client in order to send TPCE notifications
+      to ONAP Dmaap Message router.
+
+-  **feature odl-transportpce-nbinotifications**
+
+   -  This feature is considered experimental. It provides transportPCE with connectors in order to read/write
+      notifications stored in topics of a Kafka server.

 
 How To Start
 ------------
 
 How To Start
 ------------


@@ -63,6 +73,8 @@ Preparing for Installation
 
 1. Devices must support the standard OpenROADM Models more precisely versions 1.2.1 and 2.2.1.
    Since Magnesium SR0, an OTN experimental support is provided for OpenROADM devices 2.2.1.
 
 1. Devices must support the standard OpenROADM Models more precisely versions 1.2.1 and 2.2.1.
    Since Magnesium SR0, an OTN experimental support is provided for OpenROADM devices 2.2.1.

+   Magnesium SR2 is the first release managing end-to-end OTN services, as OCH-OTU4,
+   structured ODU4 or again 10GE-ODU2e services.

 
 2. Devices must support configuration through NETCONF protocol/API.
 
 
 2. Devices must support configuration through NETCONF protocol/API.
 


@@ -71,6 +83,23 @@ Preparing for Installation
 Installation Feature
 ~~~~~~~~~~~~~~~~~~~~
 
 Installation Feature
 ~~~~~~~~~~~~~~~~~~~~
 

+Creation of services with TransportPCE controller on real optical devices takes a rather long while,
+due to the fact that the output optical power level modification on interfaces requires time for stabilisation
+level. Per default values of TransportPCE timers are those recommended by OpenROADM MSA, respectively 120 000
+and 20 000 seconds.
+When running TransportPCE controller with honeynode simulators, which is the case of all TransportPCE functional tests,
+we don't need so important timer values. You can considerably speed tests using respectively 3000 and 2000 seconds.
+To that end, before running OpenDaylight, set OLM_TIMER1 and OLM_TIMER2 as environment variables.
+For example::
+
+    export OLM_TIMER1=3000 OLM_TIMER2=2000
+
+To come back with per default values for these timers, just logout from OpenDaylight controller, and unset your
+environment variables, and start again the controller::
+
+    unset OLM_TIMER1 OLM_TIMER2
+
+

 Run OpenDaylight and install TransportPCE Service *odl-transportpce* as below::
 
    feature:install odl-transportpce
 Run OpenDaylight and install TransportPCE Service *odl-transportpce* as below::
 
    feature:install odl-transportpce


@@ -79,8 +108,48 @@ if you need TAPI limited support, then run::
 
    feature:install odl-transportpce-tapi
 
 
    feature:install odl-transportpce-tapi
 

+When installing the TAPI feature, you might encounter a heap memory size problem in Karaf.
+In that case, consider increasing Karaf heap memory size.
+For example by modifying the environment variables JAVA_MIN_MEM and JAVA_MAX_MEM before starting Karaf::
+
+   export JAVA_MIN_MEM=1024M
+   export JAVA_MAX_MEM=4069M
+

 if you need the inventory external connector support limited to 1.2.1 OpenROADM devices, then run::
 
    feature:install odl-transportpce-inventory
 
 if you need the inventory external connector support limited to 1.2.1 OpenROADM devices, then run::
 
    feature:install odl-transportpce-inventory
 

+if you need the Dmaap connector support, before running Opendaylight, set DMAAP_BASE_URL as environment variable.
+For example, if the base url of your Dmaap server is "https://dmaap-mr:30226", then::
+
+    export DMAAP_BASE_URL=https://dmaap-mr:30226
+
+if your Dmaap server provides https connection through a self-signed certificate, do not forget to add the certificate
+to the JAVA truststore::
+
+    echo -n | openssl s_client -showcerts -connect dmaap-mr:30226 | sed -ne '/-BEGIN CERTIFICATE-/,/-END CERTIFICATE-/p' > /tmp/dmaap.crt
+    keytool -import -v -trustcacerts -alias dmaap -file /tmp/dmaap.crt -keystore /etc/ssl/certs/java/cacerts -keypass changeit -storepass changeit -noprompt
+
+where dmaap-mr:30226 is the url of your Dmaap server.
+
+Then run in karaf::
+
+   feature:install odl-transportpce-dmaap-client
+
+If you need the NBI-notifications support, before installing odl-transportpce-nbinotifications feature,
+make sure to run ZooKeeper and then the Kafka server.
+By default, it is considered that the Kafka server is installed in localhost and listens on the 9092 port,
+if it isn't the case then set the KAFKA_SERVER environment variable of your system or
+modify the file *'transportpce/features/odl-transportpce-nbinotifications
+/src/main/resources/org.opendaylight.transportpce.nbinotifications.cfg'*::
+
+   suscriber.server=${env:KAFKA_SERVER:-[IP_ADDRESS]:[PORT]}
+   publisher.server=${env:KAFKA_SERVER:-[IP_ADDRESS]:[PORT]}
+
+*where [IP_ADDRESS] and [PORT] are respectively the IP address and the port that host the Kafka server.*
+
+After that, run in karaf::
+
+   feature:install odl-transportpce-nbinotifications
+

 For a more detailed overview of the TransportPCE, see the :ref:`transportpce-dev-guide`.
 For a more detailed overview of the TransportPCE, see the :ref:`transportpce-dev-guide`.