+***************************
OpenDaylight Karaf Features
-===========================
+***************************
This section provides brief descriptions of the most commonly used Karaf
features developed by OpenDaylight project teams. They are presented in
:local:
AAA
----
+===
Standards-compliant Authentication, Authorization and Accounting Services.
RESTCONF is the most common consumer of AAA, which installs the AAA features
automatically. AAA provides:
* Support for persistent data stores
* Federation and SSO with OpenStack Keystone
-The Beryllium release of AAA includes experimental support for having the database of users and credentials stored in the cluster-aware MD-SAL datastore.
+This release of AAA includes experimental support for having the database of users and credentials stored in the cluster-aware MD-SAL datastore.
ALTO
-----
+====
Implements the Application-Layer Traffic Optimization (ALTO) base IETF protocol
to provide network information to applications. It defines abstractions and
services to enable simplified network views and network services to guide
amongst endpoints.
Border Gateway Protocol (including Link-state Distribution (BGP)
-----------------------------------------------------------------
+================================================================
Is a southbound plugin that provides support for Border Gateway Protocol
(including Link-state Distribution) as a source of L3 topology information.
Border Gateway Monitoring Protocol (BMP)
-----------------------------------------
+========================================
Is a southbound plugin that provides support for BGP Monitoring Protocol as a
monitoring station.
Control and Provisioning of Wireless Access Points (CAPWAP)
------------------------------------------------------------
+===========================================================
Enables OpenDaylight to manage CAPWAP-compliant wireless termination point (WTP)
network devices. Intelligent applications, e.g., radio planning, can be
developed by tapping into the operational states made available via REST APIs of
WTP network devices.
Controller Shield
------------------
+=================
Creates a repository called the Unified-Security Plugin (USecPlugin) to provide
controller security information to northbound applications, such as the
following:
Information collected at the plugin may also be used to configure firewalls and create IP blacklists for the network.
Device Identification and Driver Management (DIDM)
---------------------------------------------------
+==================================================
Provides device-specific functionality, which means that code enabling a feature
understands the capability and limitations of the device it runs on. For
example, configuring VLANs and adjusting FlowMods are features, and there may be
functionality is implemented as Device Drivers.
DLUX
-----
+====
Web based OpenDaylight user interface that includes:
* An MD-SAL flow viewer
* A tool box and YANG model that execute queries and visualize the YANG tree
Fabric as a Service (FaaS)
---------------------------
+==========================
Creates a common abstraction layer on top of a physical network so northbound
APIs or services can be more easily mapped onto the physical network as a
concrete device configuration.
Group Based Policy (GBP)
-------------------------
+========================
Defines an application-centric policy model for OpenDaylight that separates
information about application connectivity requirements from information about
the underlying details of the network infrastructure. Provides support for:
* OFOverlay support for NAT, table offsets
Internet of Things Data Management (IoTDM)
-------------------------------------------
+==========================================
Developing a data-centric middleware to act as a oneM2M_-compliant IoT Data
Broker (IoTDB) and enable authorized applications to retrieve IoT data uploaded
by any device.
Link Aggregation Control Protocol (LACP)
-----------------------------------------
+========================================
LACP can auto-discover and aggregate multiple links between an
OpenDaylight-controlled network and LACP-enabled endpoints or switches.
Location Identifier Separation Protocol (LISP) Flow Mapping Service (LISP)
---------------------------------------------------------------------------
+==========================================================================
LISP (RFC6830) enables separation of Endpoint Identity (EID) from Routing
Location (RLOC) by defining an overlay in the EID space, which is mapped to the
underlying network in the RLOC space.
OpenDaylight via the LISP protocol.
NEMO
-----
+====
Is a Domain Specific Language (DSL) for the abstraction of network models and
identification of operation patterns. NEMO enables network users/applications to
describe their demands for network resources, services, and logical operations
in an intuitive way that can be explained and executed by a language engine.
NETCONF
--------
+=======
Offers four features:
* odl-netconf-mdsal: NETCONF Northbound for MD-SAL and applications
* odl-restconf: RESTCONF Northbound for MD-SAL and applications
NetIDE
-------
+======
Enables portability and cooperation inside a single network by using a
client/server multi-controller architecture. It provides an interoperability
layer allowing SDN Applications written for other SDN Controllers to run on
engine.
OVSDB-based Network Virtualization Services
--------------------------------------------
+===========================================
Several services and plugins in OpenDaylight work together to provide simplified
integration with the OpenStack Neutron framework. These services enable
OpenStack to offload network processing to OpenDaylight while enabling
is now available.
* Clustering - Full support for clustering and High Availability (HA) is
- available in the OpenDaylight Beryllium release. In particular, the OVSDB
+ available in the this OpenDaylight release. In particular, the OVSDB
southbound plugin supports clustering that any application can use, and the
Openstack network integration with OpenDaylight (through OVSDB Net-Virt) has
full clustering support. While there is no specific limit on cluster size, a
- 3-node cluster has been tested extensively as part of the Beryllium release.
+ 3-node cluster has been tested extensively as part of the release.
* Security Groups - Security Group support is available and implemented using
OpenFlow rules that provide superior functionality and performance over
* Service Function Chaining
* Open vSwitch southbound support for quality of service and Queue configuration
- Load Balancer as service (LBaaS) with Distributed Virtual Router, as offered
- in the Lithium release
+ Load Balancer as service (LBaaS) with Distributed Virtual Router
* Network Virtualization User interface for DLUX
OpenFlow Configuration Protocol (OF-CONFIG)
--------------------------------------------
+===========================================
Provides a process for an Operation Context containing an OpenFlow Switch that uses OF-CONFIG to communicate with an OpenFlow Configuration Point, enabling remote configuration of OpenFlow datapaths.
OpenFlow plugin
----------------
+===============
Supports connecting to OpenFlow-enabled network devices via the OpenFlow
specification. It currently supports OpenFlow versions 1.0 and 1.3.2.
In addition to support for the core OpenFlow specification, OpenDaylight
-Beryllium also includes preliminary support for the Table Type Patterns and
+also includes preliminary support for the Table Type Patterns and
OF-CONFIG specifications.
Path Computation Element Protocol (PCEP)
-----------------------------------------
+========================================
Is a southbound plugin that provides support for performing Create, Read,
Update, and Delete (CRUD) operations on Multiprotocol Label Switching (MPLS)
tunnels in the underlying network.
Secure Network Bootstrapping Interface (SNBi)
----------------------------------------------
+=============================================
Leverages manufacturer-installed IEEE 802.1AR certificates to secure initial
communications for a zero-touch approach to bootstrapping using Docker. SNBi
devices and controllers automatically do the following:
federation processes.
Service Function Chaining (SFC)
--------------------------------
+===============================
Provides the ability to define an ordered list of network services (e.g.
firewalls, load balancers) that are then "stitched" together in the network to
create a service chain. SFC provides the chaining logic and APIs necessary for
* Integration with OpenDaylight OVSDB NetVirt project
SNMP Plugin
------------
+===========
The SNMP southbound plugin allows applications acting as an SNMP Manager to
interact with devices that support an SNMP agent. The SNMP plugin implements a
general SNMP implementation, which differs from the SNMP4SDN as that project
device.
SNMP4SDN
---------
+========
Provides a southbound SNMP plugin to optimize delivery of SDN controller
benefits to traditional/legacy ethernet switches through the SNMP interface. It
offers support for flow configuration on ACLs and enables flow configuration
via REST API and multi-vendor support.
Source-Group Tag Exchange Protocol (SXP)
-----------------------------------------
+========================================
Enables creation of a tag that allows you to filter traffic instead of using
protocol-specific information like addresses and ports. Via SXP an external
entity creates the tags, assigns them to traffic appropriately, and publishes
services and networking devices.
Topology Processing Framework
------------------------------
+=============================
Provides a framework for simplified aggregation and topology data query to
enable a unified topology view, including multi-protocol, Underlay, and
Overlay resources.
Time Series Data Repository (TSDR)
-----------------------------------
+==================================
Creates a framework for collecting, storing, querying, and maintaining time
series data in OpenDaylight. You can leverage various data-driven applications
built on top of TSDR when you install a datastore and at least one collector.
* Data Query Service - For external data-driven applications to query data from
TSDR through REST APIs
+* ElasticSearch - Use external elastic search engine with TSDR integrated support.
* NBI integration with Grafana - Allows visualization of data collected in TSDR
using Grafana
* Data Aggregation Service - Periodically aggregates raw data into larger time granularities
various types of collectors
* HSQL data store - Replacement of H2 data store to remove third party
component dependency from TSDR
-* Enhancement of existing data stores including HBase to support new features
- introduced in Beryllium
* Cassandra data store - Cassandra implementation of TSDR SPIs
* NetFlow data collector - Collect NetFlow data from network elements
* NetFlowV9 - version 9 Netflow collector
-* SNMP Data Collector - Integrates with SNMP plugin to bring SNMP data into TSDR
* sFlowCollector - Collects sFlow data from network elements
+* SNMP Data Collector - Integrates with SNMP plugin to bring SNMP data into TSDR
* Syslog data collector - Collects syslog data from network elements
+* Web Activity data collector - Collects ODL RESTCONF queries made to TSDR
TSDR has multiple features to enable the functionality above. To begin,
select one of these data stores:
* odl-tsdr-openflow-statistics-collector
* odl-tsdr-netflow-statistics-collector
-* odl-tsdr-controller-metrics-collector
* odl-tsdr-sflow-statistics-collector
+* odl-tsdr-controller-metrics-collector
* odl-tsdr-snmp-data-collector
* odl-tsdr-syslog-collector
+* odl-tsdr-restconf-collector
+
+Enable ElasticSearch support:
+
+* odl-tsdr-elasticsearch
See these TSDR_Directions_ for more information.
Unified Secure Channel (USC)
-----------------------------
+============================
Provides a central server to coordinate encrypted communications between
endpoints. Its client-side agent informs the controller about its encryption
capabilities and can be instructed to encrypt select flows based on business
centralize the coordination of encryption across a wide array of endpoint and
device types.
-VPN Service
------------
-Implements the infrastructure services required to support L3 VPN service. It
-initially leverages open source routing applications as pluggable components.
-L3 services include:
-
-* The L3 VPN Manager
-* MP-BGP Routing Stack
-* MPLS Label Manager
-* NextHop Manager
-* FIB Service & Openstack Neutron Service
-
-The VPN Service offers:
-
-* An API for L3 VPN Services
-* Integration with open source routing suites, including Quagga & Ryu
-* OpenStack Integration with BGPVPN_Blueprint_ for end-to-end integration
-* OpenStack Neutron integration
-* VPN Service upstreamed as part of SDN-distributed routing and the VPN (SDNVPN)
- project of Open Platform for NFV project (OPNFV) (available in Brahmaputra
- release)
-* Network Overlay solution necessary for a Datacenter/Cloud environment
-
Virtual Tenant Network (VTN)
-----------------------------
+============================
Provides multi-tenant virtual network on an SDN controller, allowing you to
define the network with a look and feel of a conventional L2/L3 network. Once
the network is designed on VTN, it automatically maps into the underlying
Code Review / docs.git / blobdiff