data/RPC/notifications described by a YANG model that is implemented by
the device.**
- **Tip**
+.. tip::
NETCONF southbound can be activated by installing
``odl-netconf-connector-all`` Karaf feature.
**For such devices you only need to put the schema into folder
cache/schema inside your Karaf distribution.**
- **Important**
+.. important::
The file with YANG schema for ietf-inet-types has to be called
ietf-inet-types@2010-09-24.yang. It is the required naming format of
new NETCONF connectors both through the NETCONF server for MD-SAL (port
2830) or RESTCONF. This guide focuses on RESTCONF.
- **Tip**
+.. tip::
To enable NETCONF connector configuration through MD-SAL install
either the ``odl-netconf-topology`` or
To spawn NETCONF connectors that are cluster-aware you need to install
the ``odl-netconf-clustered-topology`` karaf feature.
- **Warning**
+.. warning::
The ``odl-netconf-topology`` and ``odl-netconf-clustered-topology``
features are considered **INCOMPATIBLE**. They both manage the same
Should return 200 response code with no body.
- **Tip**
+.. tip::
This call is transformed into a couple of NETCONF RPCs. Resulting
NETCONF RPCs that go directly to the device can be found in the
Notifications over NETCONF are not supported in the Boron release.
- **Tip**
+.. tip::
Install NETCONF northbound for MD-SAL by installing feature:
``odl-netconf-mdsal`` in karaf. Default binding port is **2830**.
These jars are part of OpenDaylight’s controller project and are built
from the NETCONF codebase in OpenDaylight.
- **Tip**
+.. tip::
Download testtool from OpenDaylight Nexus at:
https://nexus.opendaylight.org/content/repositories/public/org/opendaylight/netconf/netconf-testtool/1.1.0-Boron/
- perf-client.jar - RESTCONF stress/performance measuring tool
- **Tip**
+.. tip::
Each executable tool provides help. Just invoke ``java -jar
<name-of-the-tool.jar> --help``
http://localhost:8181/restconf/operational/network-topology:network-topology/topology/topology-netconf/node/17830-sim-device/yang-ext:mount/
- **Warning**
+.. warning::
Data will be mirrored in operational datastore only when using the
default simple datastore.
This will register YANGLIB provided sources as a fallback schemas for
particular mount point.
+
+NETCONF Call Home
+-----------------
+
+.. important::
+
+ The call home feature is experimental and will change in a future
+ release. In particular, the Yang models will change to those specified
+ in the `RFC 8071 <https://tools.ietf.org/html/rfc8071>`__
+
+Call Home Installation
+~~~~~~~~~~~~~~~~~~~~~~
+
+ODL Call-Home server is installed in Karaf by installing karaf feature
+``odl-netconf-callhome-ssh``. RESTCONF feature is recommended for
+configuring Call Home & testing its functionality.
+
+::
+
+ feature:install odl-netconf-callhome-ssh
+
+
+.. note::
+
+ In order to test Call Home functionality we recommend Netopeer.
+ See `Netopeer Call Home <https://github.com/CESNET/netopeer/wiki/CallHome>`__ to learn how to enable call-home on Netopeer.
+
+Northbound Call-Home API
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+The northbound Call Home API is used for administering the Call-Home Server. The
+following describes this configuration.
+
+Global Configuration
+^^^^^^^^^^^^^^^^^^^^
+
+Configuring global credentials
+''''''''''''''''''''''''''''''
+
+ODL Call-Home server allows user to configure global credentials, which
+will be used for devices which does not have device-specific credentials
+configured.
+
+This is done by creating
+``/odl-netconf-callhome-server:netconf-callhome-server/global/credentials``
+with username and passwords specified.
+
+*Configuring global username & passwords to try*
+
+.. code-block:: http
+
+ PUT
+ /restconf/config/odl-netconf-callhome-server:netconf-callhome-server/global/credentials HTTP/1.1
+ Content-Type: application/json
+ Accept: application/json
+
+.. code-block:: json
+
+ {
+ "credentials":
+ {
+ "username": "example",
+ "passwords": [ "first-password-to-try", "second-password-to-try" ]
+ }
+ }
+
+Configuring to accept any ssh server key using global credentials
+'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+By default Netconf Call-Home Server accepts only incoming connections
+from allowed devices
+``/odl-netconf-callhome-server:netconf-callhome-server/allowed-devices``,
+if user desire to allow all incoming connections, it is possible to set
+``accept-all-ssh-keys`` to ``true`` in
+``/odl-netconf-callhome-server:netconf-callhome-server/global``.
+
+The name of this devices in ``netconf-topology`` will be in format
+``ip-address:port``. For naming devices see Device-Specific
+Configuration.
+
+*Allowing unknown devices to connect*
+
+This is a debug feature and should not be used in production. Besides being an obvious
+security issue, this also causes the Call-Home Server to drastically increase its output
+to the log.
+
+.. code-block:: http
+
+ POST
+ /restconf/config/odl-netconf-callhome-server:netconf-callhome-server/global HTTP/1.1
+ Content-Type: application/json
+ Accept: application/json
+
+.. code-block:: json
+
+ {
+ "global": {
+ "accept-all-ssh-keys": "true"
+ }
+ }
+
+Device-Specific Configuration
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Allowing Device & Configuring Name
+''''''''''''''''''''''''''''''''''
+
+Netconf Call Home Server uses device provided SSH server key (host key)
+to identify device. The pairing of name and server key is configured in
+``/odl-netconf-callhome-server:netconf-callhome-server/allowed-devices``.
+This list is colloquially called a whitelist.
+
+If the Call-Home Server finds the SSH host key in the whitelist, it continues
+to negotiate a NETCONF connection over an SSH session. If the SSH host key is
+not found, the connection between the Call Home server and the device is dropped
+immediately. In either case, the device that connects to the Call home server
+leaves a record of its presence in the operational store.
+
+*Example of configuring device*
+
+.. code-block:: http
+
+ PUT
+ /restconf/config/odl-netconf-callhome-server:netconf-callhome-server/allowed-devices/device/example HTTP/1.1
+ Content-Type: application/json
+ Accept: application/json
+
+.. code-block:: json
+
+ {
+ "device": {
+ "unique-id": "example",
+ "ssh-host-key": "AAAAB3NzaC1yc2EAAAADAQABAAABAQDHoH1jMjltOJnCt999uaSfc48ySutaD3ISJ9fSECe1Spdq9o9mxj0kBTTTq+2V8hPspuW75DNgN+V/rgJeoUewWwCAasRx9X4eTcRrJrwOQKzb5Fk+UKgQmenZ5uhLAefi2qXX/agFCtZi99vw+jHXZStfHm9TZCAf2zi+HIBzoVksSNJD0VvPo66EAvLn5qKWQD4AdpQQbKqXRf5/W8diPySbYdvOP2/7HFhDukW8yV/7ZtcywFUIu3gdXsrzwMnTqnATSLPPuckoi0V2jd8dQvEcu1DY+rRqmqu0tEkFBurlRZDf1yhNzq5xWY3OXcjgDGN+RxwuWQK3cRimcosH"
+ }
+ }
+
+Configuring Device with Device-specific Credentials
+'''''''''''''''''''''''''''''''''''''''''''''''''''
+
+Call Home Server also allows to configure credentials per device basis,
+this is done by introducing ``credentials`` container into
+device-specific configuration. Format is same as in global credentials.
+
+*Configuring Device with Credentials*
+
+.. code-block:: http
+
+ PUT
+ /restconf/config/odl-netconf-callhome-server:netconf-callhome-server/allowed-devices/device/example HTTP/1.1
+ Content-Type: application/json
+ Accept: application/json
+
+.. code-block:: json
+
+ {
+ "device": {
+ "unique-id": "example",
+ "credentials": {
+ "username": "example",
+ "passwords": [ "password" ]
+ },
+ "ssh-host-key": "AAAAB3NzaC1yc2EAAAADAQABAAABAQDHoH1jMjltOJnCt999uaSfc48ySutaD3ISJ9fSECe1Spdq9o9mxj0kBTTTq+2V8hPspuW75DNgN+V/rgJeoUewWwCAasRx9X4eTcRrJrwOQKzb5Fk+UKgQmenZ5uhLAefi2qXX/agFCtZi99vw+jHXZStfHm9TZCAf2zi+HIBzoVksSNJD0VvPo66EAvLn5qKWQD4AdpQQbKqXRf5/W8diPySbYdvOP2/7HFhDukW8yV/7ZtcywFUIu3gdXsrzwMnTqnATSLPPuckoi0V2jd8dQvEcu1DY+rRqmqu0tEkFBurlRZDf1yhNzq5xWY3OXcjgDGN+RxwuWQK3cRimcosH"
+ }
+ }
+
+Operational Status
+^^^^^^^^^^^^^^^^^^
+
+Once an entry is made into the config side of "allowed-devices", the Call-Home Server will
+populate an corresponding operational device that is the same as the config device but
+has an additional status. By default, this status is *DISCONNECTED*. Once a device calls
+home, this status will change to one of:
+
+*CONNECTED* — The device is currently connected and the NETCONF mount is available for network
+management.
+
+*FAILED_AUTH_FAILURE* — The last attempted connection was unsuccessful because the Call-Home
+Server was unable to provide the acceptable credentials of the device. The device is also
+disconnected and not available for network management.
+
+*FAILED_NOT_ALLOWED* — The last attempted connection was unsuccessful because the device was
+not recognized as an acceptable device. The device is also disconnected and not available for
+network management.
+
+*FAILED* — The last attempted connection was unsuccessful for a reason other than not
+allowed to connect or incorrect client credentials. The device is also disconnected and not
+available for network management.
+
+*DISCONNECTED* — The device is currently disconnected.
+
+Rogue Devices
+'''''''''''''
+
+Devices which are not on the whitelist might try to connect to the Call-Home Server. In
+these cases, the server will keep a record by instantiating an operational device. There
+will be no corresponding config device for these rogues. They can be identified readily
+because their device id, rather than being user-supplied, will be of the form
+"address:port". Note that if a device calls back multiple times, there will only be
+a single operatinal entry (even if the port changes); these devices are recognized by
+their unique host key.
+
+Southbound Call-Home API
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+The Call-Home Server listens for incoming TCP connections and assumes that the other side of
+the connection is a device calling home via a NETCONF connection with SSH for
+management. The server uses port 6666 by default and this can be configured via a
+blueprint configuration file.
+
+The device **must** initiate the connection and the server will not try to re-establish the
+connection in case of a drop. By requirement, the server cannot assume it has connectivity
+to the device due to NAT or firewalls among others.
Code Review / docs.git / blobdiff