cat << EOF
common-functions environment:
MAVENCONF: ${MAVENCONF}
+ACTUALFEATURES: ${ACTUALFEATURES}
FEATURESCONF: ${FEATURESCONF}
CUSTOMPROP: ${CUSTOMPROP}
LOGCONF: ${LOGCONF}
AKKACONF: ${AKKACONF}
MODULESCONF: ${MODULESCONF}
MODULESHARDSCONF: ${MODULESHARDSCONF}
+SUITES: ${SUITES}
EOF
}
echo "Configuring the karaf log... karaf_version: ${karaf_version}, logapi: ${logapi}"
if [ "${logapi}" == "log4j2" ]; then
# FIXME: Make log size limit configurable from build parameter.
+ # From Neon the default karaf file size is 64 MB
+ sed -ie 's/log4j2.appender.rolling.policies.size.size = 64MB/log4j2.appender.rolling.policies.size.size = 1GB/g' ${LOGCONF}
+ # Flourine still uses 16 MB
sed -ie 's/log4j2.appender.rolling.policies.size.size = 16MB/log4j2.appender.rolling.policies.size.size = 1GB/g' ${LOGCONF}
orgmodule="org.opendaylight.yangtools.yang.parser.repo.YangTextSchemaContextResolver"
orgmodule_="${orgmodule//./_}"
fi
# Add custom logging levels
- # CONTROLLERDEBUGMAP is expected to be a key:value map of space separated values like "module:level module2:level2"
- # where module is abbreviated and does not include "org.opendaylight."
+ # CONTROLLERDEBUGMAP is expected to be a key:value map of space separated
+ # values like "module:level module2:level2" where module is abbreviated and
+ # does not include "org.opendaylight."
unset IFS
echo "controllerdebugmap: ${controllerdebugmap}"
if [ -n "${controllerdebugmap}" ]; then
cat ${LOGCONF}
} # function configure_karaf_log()
+function configure_karaf_log_for_apex() {
+ # TODO: add the extra steps to this function to do any extra work
+ # in this apex environment like we do in our standard environment.
+ # EX: log size, rollover, etc.
+
+ # Modify ODL Log Levels, if needed, for new distribution. This will modify
+ # the control nodes hiera data which will be used during the puppet deploy
+ # CONTROLLERDEBUGMAP is expected to be a key:value map of space separated
+ # values like "module:level module2:level2" where module is abbreviated and
+ # does not include "org.opendaylight."
+
+ local -r controller_ip=$1
+
+ unset IFS
+ # shellcheck disable=SC2153
+ echo "CONTROLLERDEBUGMAP: ${CONTROLLERDEBUGMAP}"
+ if [ -n "${CONTROLLERDEBUGMAP}" ]; then
+ logging_config='\"opendaylight::log_levels\": {'
+ for kv in ${CONTROLLERDEBUGMAP}; do
+ module="${kv%%:*}"
+ level="${kv#*:}"
+ echo "module: $module, level: $level"
+ # shellcheck disable=SC2157
+ if [ -n "${module}" ] && [ -n "${level}" ]; then
+ orgmodule="org.opendaylight.${module}"
+ logging_config="${logging_config} \\\"${orgmodule}\\\": \\\"${level}\\\","
+ fi
+ done
+ # replace the trailing comma with a closing brace followed by trailing comma
+ logging_config=${logging_config%,}" },"
+ echo $logging_config
+
+ # fine a sane line number to inject the custom logging json
+ lineno=$(ssh $OPENSTACK_CONTROL_NODE_1_IP "sudo grep -Fn 'opendaylight::log_mechanism' /etc/puppet/hieradata/service_configs.json" | awk -F: '{print $1}')
+ ssh $controller_ip "sudo sed -i \"${lineno}i ${logging_config}\" /etc/puppet/hieradata/service_configs.json"
+ ssh $controller_ip "sudo cat /etc/puppet/hieradata/service_configs.json"
+ fi
+} # function configure_karaf_log_for_apex()
+
+function configure_odl_features_for_apex() {
+
+ # if the environment variable $ACTUALFEATURES is not null, then rewrite
+ # the puppet config file with the features given in that variable, otherwise
+ # this function is a noop
+
+ local -r controller_ip=$1
+ local -r config_file=/etc/puppet/hieradata/service_configs.json
+
+cat > /tmp/set_odl_features.sh << EOF
+sudo jq '.["opendaylight::extra_features"] |= []' $config_file > tmp.json && mv tmp.json $config_file
+for feature in $(echo $ACTUALFEATURES | sed "s/,/ /g"); do
+ sudo jq --arg jq_arg \$feature '.["opendaylight::extra_features"] |= . + [\$jq_arg]' $config_file > tmp && mv tmp $config_file;
+done
+echo "Modified puppet-opendaylight service_configs.json..."
+cat $config_file
+EOF
+
+ echo "Feature configuration script..."
+ cat /tmp/set_odl_features.sh
+
+ if [ -n "${ACTUALFEATURES}" ]; then
+ scp /tmp/set_odl_features.sh $controller_ip:/tmp/set_odl_features.sh
+ ssh $controller_ip "sudo bash /tmp/set_odl_features.sh"
+ fi
+
+} # function configure_odl_features_for_apex()
+
function get_os_deploy() {
local -r num_systems=${1:-$NUM_OPENSTACK_SYSTEM}
case ${num_systems} in
# Use the testplan if specific SUITES are not defined.
if [ -z "${SUITES}" ]; then
- suite_list=`egrep -v '(^[[:space:]]*#|^[[:space:]]*$)' testplan.txt | tr '\012' ' '`
+ suite_list=$(egrep -v '(^[[:space:]]*#|^[[:space:]]*$)' testplan.txt | tr '\012' ' ')
else
suite_list=""
workpath="${WORKSPACE}/test/csit/suites"
;;
esac
- printf "Locating ${type} plan to use...\n"
+ printf "Locating %s plan to use...\n" "${type}"
plan_filepath="${WORKSPACE}/test/csit/${type}plans/$plan"
if [ ! -f "${plan_filepath}" ]; then
plan_filepath="${WORKSPACE}/test/csit/${type}plans/${STREAMTESTPLAN}"
fi
if [ -f "${plan_filepath}" ]; then
- printf "${type} plan exists!!!\n"
- printf "Changing the ${type} plan path...\n"
+ printf "%s plan exists!!!\n" "${type}"
+ printf "Changing the %s plan path...\n" "${type}"
cat ${plan_filepath} | sed "s:integration:${WORKSPACE}:" > ${type}plan.txt
cat ${type}plan.txt
for line in $( egrep -v '(^[[:space:]]*#|^[[:space:]]*$)' ${type}plan.txt ); do
- printf "Executing ${line}...\n"
+ printf "Executing %s...\n" "${line}"
# shellcheck source=${line} disable=SC1091
source ${line}
done
fi
- printf "Finished running ${type} plans\n"
+ printf "Finished running %s plans\n" "${type}"
} # function run_plan()
# Return elapsed time. Usage:
{
if [ $# -eq 0 ]; then
# return the current time
- printf "$(date "+%s")"
+ printf "%s" "$(date "+%s")"
else
local start_time=$1
end_time=$(date "+%s")
local -r filter=$3
filter_=${filter// /_}
- printf "node ${ip}, ${prefix}_${ip}__${filter}: starting tcpdump\n"
+ printf "node %s, %s_%s__%s: starting tcpdump\n" "${ip}" "${prefix}" "${ip}" "${filter}"
ssh ${ip} "nohup sudo /usr/sbin/tcpdump -vvv -ni eth0 ${filter} -w /tmp/tcpdump_${prefix}_${ip}__${filter_}.pcap > /tmp/tcpdump_start.log 2>&1 &"
${SSH} ${ip} "ps -ef | grep tcpdump"
}
function tcpdump_stop() {
local -r ip=$1
- printf "node $ip: stopping tcpdump\n"
+ printf "node %s: stopping tcpdump\n" "$ip"
${SSH} ${ip} "ps -ef | grep tcpdump.sh"
${SSH} ${ip} "sudo pkill -f tcpdump"
${SSH} ${ip} "sudo xz -9ekvvf /tmp/*.pcap"
local -r node_type=${3}
local oslogs="${folder}/oslogs"
- printf "collect_openstack_logs for ${node_type} node: ${ip} into ${oslogs}\n"
+ printf "collect_openstack_logs for %s node: %s into %s\n" "${node_type}" "${ip}" "${oslogs}"
rm -rf ${oslogs}
mkdir -p ${oslogs}
# There are always some logs in /opt/stack/logs and this also covers the
ls -al /tmp/oslogs
EOF
# cat > ${WORKSPACE}/collect_openstack_logs.sh << EOF
- printf "collect_openstack_logs for ${node_type} node: ${ip} into ${oslogs}, executing script\n"
+ printf "collect_openstack_logs for %s node: %s into %s, executing script\n" "${node_type}" "${ip}" "${oslogs}"
cat ${WORKSPACE}/collect_openstack_logs.sh
scp ${WORKSPACE}/collect_openstack_logs.sh ${ip}:/tmp
${SSH} ${ip} "bash /tmp/collect_openstack_logs.sh > /tmp/collect_openstack_logs.log 2>&1"
sleep 5
# FIXME: Do not create .tar and gzip before copying.
- for i in `seq 1 ${NUM_ODL_SYSTEM}`; do
+ for i in $(seq 1 "${NUM_ODL_SYSTEM}"); do
CONTROLLERIP=ODL_SYSTEM_${i}_IP
echo "collect_logs: for opendaylight controller ip: ${!CONTROLLERIP}"
NODE_FOLDER="odl_${i}"
print_job_parameters > ${WORKSPACE}/archives/params.txt
# Control Node
- for i in `seq 1 ${NUM_OPENSTACK_CONTROL_NODES}`; do
+ for i in $(seq 1 "${NUM_OPENSTACK_CONTROL_NODES}"); do
OSIP=OPENSTACK_CONTROL_NODE_${i}_IP
if [ "$(is_openstack_feature_enabled n-cpu)" == "1" ]; then
echo "collect_logs: for openstack combo node ip: ${!OSIP}"
done
# Compute Nodes
- for i in `seq 1 ${NUM_OPENSTACK_COMPUTE_NODES}`; do
+ for i in $(seq 1 "${NUM_OPENSTACK_COMPUTE_NODES}"); do
OSIP=OPENSTACK_COMPUTE_NODE_${i}_IP
echo "collect_logs: for openstack compute node ip: ${!OSIP}"
NODE_FOLDER="compute_${i}"
function get_nodes_list() {
# Create the string for nodes
- for i in `seq 1 ${NUM_ODL_SYSTEM}` ; do
+ for i in $(seq 1 "${NUM_ODL_SYSTEM}") ; do
CONTROLLERIP=ODL_SYSTEM_${i}_IP
nodes[$i]=${!CONTROLLERIP}
done
# Some versions of jenkins job builder result in feature list containing spaces
# and ending in newline. Remove all that.
- ACTUALFEATURES=`echo "${ACTUALFEATURES}" | tr -d '\n \r'`
+ ACTUALFEATURES=$(echo "${ACTUALFEATURES}" | tr -d '\n \r')
echo "ACTUALFEATURES: ${ACTUALFEATURES}"
# In the case that we want to install features via karaf shell, a space separated list of
# Copy over the configuration script and configuration files to each controller
# Execute the configuration script on each controller.
function copy_and_run_configuration_script() {
- for i in `seq 1 ${NUM_ODL_SYSTEM}`; do
+ for i in $(seq 1 "${NUM_ODL_SYSTEM}"); do
CONTROLLERIP=ODL_SYSTEM_${i}_IP
echo "Configuring member-${i} with IP address ${!CONTROLLERIP}"
scp ${WORKSPACE}/configuration-script.sh ${!CONTROLLERIP}:/tmp/
# Copy over the startup script to each controller and execute it.
function copy_and_run_startup_script() {
- for i in `seq 1 ${NUM_ODL_SYSTEM}`; do
+ for i in $(seq 1 "${NUM_ODL_SYSTEM}"); do
CONTROLLERIP=ODL_SYSTEM_${i}_IP
echo "Starting member-${i} with IP address ${!CONTROLLERIP}"
scp ${WORKSPACE}/startup-script.sh ${!CONTROLLERIP}:/tmp/
function copy_and_run_post_startup_script() {
seed_index=1
- for i in `seq 1 ${NUM_ODL_SYSTEM}`; do
+ for i in $(seq 1 "${NUM_ODL_SYSTEM}"); do
CONTROLLERIP=ODL_SYSTEM_${i}_IP
echo "Execute the post startup script on controller ${!CONTROLLERIP}"
scp ${WORKSPACE}/post-startup-script.sh ${!CONTROLLERIP}:/tmp
ssh ${!CONTROLLERIP} "bash /tmp/post-startup-script.sh $(( seed_index++ ))"
- if [ $(( $i % ${NUM_ODL_SYSTEM} )) == 0 ]; then
+ if [ $(( i % NUM_ODL_SYSTEM )) == 0 ]; then
seed_index=1
fi
done
function create_controller_variables() {
echo "Generating controller variables..."
- for i in `seq 1 ${NUM_ODL_SYSTEM}`; do
+ for i in $(seq 1 "${NUM_ODL_SYSTEM}"); do
CONTROLLERIP=ODL_SYSTEM_${i}_IP
odl_variables=${odl_variables}" -v ${CONTROLLERIP}:${!CONTROLLERIP}"
echo "Lets's take the karaf thread dump"
local -r rpm_path="$3"
echo "Building OVS ${version} on ${ip} ..."
- cat > ${WORKSPACE}/build_ovs.sh << EOF
+ cat > "${WORKSPACE}"/build_ovs.sh << EOF
set -ex -o pipefail
echo '---> Building openvswitch version ${version}'
rm -rf \${TMP}
EOF
- scp ${WORKSPACE}/build_ovs.sh ${ip}:/tmp
- ${SSH} ${ip} " bash /tmp/build_ovs.sh >> /tmp/install_ovs.txt 2>&1"
- scp -r ${ip}:/tmp/ovs_rpms/* "${rpm_path}/"
- ${SSH} ${ip} "rm -rf /tmp/ovs_rpms"
+ scp "${WORKSPACE}"/build_ovs.sh "${ip}":/tmp
+ ${SSH} "${ip}" " bash /tmp/build_ovs.sh >> /tmp/install_ovs.txt 2>&1"
+ scp -r "${ip}":/tmp/ovs_rpms/* "${rpm_path}/"
+ ${SSH} "${ip}" "rm -rf /tmp/ovs_rpms"
}
# Install OVS RPMs from yum repo
local -r rpm_repo="$2"
echo "Installing OVS from repo ${rpm_repo} on ${ip} ..."
- cat > ${WORKSPACE}/install_ovs.sh << EOF
+ cat > "${WORKSPACE}"/install_ovs.sh << EOF
set -ex -o pipefail
echo '---> Installing openvswitch from ${rpm_repo}'
[ "\${PREV_MOD}" != "\${NEW_MOD}" ] || (echo "Kernel module was not updated" && exit 1)
EOF
- scp ${WORKSPACE}/install_ovs.sh ${ip}:/tmp
- ${SSH} ${ip} "bash /tmp/install_ovs.sh >> /tmp/install_ovs.txt 2>&1"
+ scp "${WORKSPACE}"/install_ovs.sh "${ip}":/tmp
+ ${SSH} "${ip}" "bash /tmp/install_ovs.sh >> /tmp/install_ovs.txt 2>&1"
}
# Install OVS RPMS from path
local -r rpm_path="$2"
echo "Creating OVS RPM repo on ${ip} ..."
- ${SSH} ${ip} "mkdir -p /tmp/ovs_rpms"
- scp -r "${rpm_path}"/* ${ip}:/tmp/ovs_rpms
- ${SSH} ${ip} "sudo yum -y install createrepo && createrepo --database /tmp/ovs_rpms"
- install_ovs_from_repo ${ip} file:/tmp/ovs_rpms
+ ${SSH} "${ip}" "mkdir -p /tmp/ovs_rpms"
+ scp -r "${rpm_path}"/* "${ip}":/tmp/ovs_rpms
+ ${SSH} "${ip}" "sudo yum -y install createrepo && createrepo --database /tmp/ovs_rpms"
+ install_ovs_from_repo "${ip}" file:/tmp/ovs_rpms
}