CONTROLLERMEM="2048m"
+if [ "${ENABLE_HAPROXY_FOR_NEUTRON}" == "yes" ]; then
+ echo "Configure cluster"
+ AKKACONF=/tmp/${BUNDLEFOLDER}/configuration/initial/akka.conf
+ MODULESCONF=/tmp/${BUNDLEFOLDER}/configuration/initial/modules.conf
+ MODULESHARDSCONF=/tmp/${BUNDLEFOLDER}/configuration/initial/module-shards.conf
+fi
+
if [ ${CONTROLLERSCOPE} == 'all' ]; then
ACTUALFEATURES="odl-integration-compatible-with-all,${CONTROLLERFEATURES}"
CONTROLLERMEM="3072m"
ACTUALFEATURES="${CONTROLLERFEATURES}"
COOLDOWN_PERIOD="60"
fi
+
# Some versions of jenkins job builder result in feature list containing spaces
# and ending in newline. Remove all that.
ACTUALFEATURES=`echo "${ACTUALFEATURES}" | tr -d '\n \r'`
-if [ -f ${WORKSPACE}/test/csit/scriptplans/${TESTPLAN} ]; then
+if [ -f "${WORKSPACE}/test/csit/scriptplans/${TESTPLAN}" ]; then
echo "scriptplan exists!!!"
echo "Changing the scriptplan path..."
cat ${WORKSPACE}/test/csit/scriptplans/${TESTPLAN} | sed "s:integration:${WORKSPACE}:" > scriptplan.txt
done
fi
-cat > ${WORKSPACE}/controller-script.sh <<EOF
+cat > ${WORKSPACE}/configuration-script.sh <<EOF
echo "Changing to /tmp"
cd /tmp
echo "Downloading the distribution..."
-wget --progress=dot:mega '${ACTUALBUNDLEURL}'
+wget --progress=dot:mega '${ACTUAL_BUNDLE_URL}'
echo "Extracting the new controller..."
unzip -q ${BUNDLE}
echo "Configuring the startup features..."
FEATURESCONF=/tmp/${BUNDLEFOLDER}/etc/org.apache.karaf.features.cfg
CUSTOMPROP=/tmp/${BUNDLEFOLDER}/etc/custom.properties
-sed -ie "s/featuresBoot=.*/featuresBoot=config,standard,region,package,kar,ssh,management,${ACTUALFEATURES}/g" \${FEATURESCONF}
+sed -ie "s/\(featuresBoot=\|featuresBoot =\)/featuresBoot = ${ACTUALFEATURES},/g" \${FEATURESCONF}
sed -ie "s%mvn:org.opendaylight.integration/features-integration-index/${BUNDLEVERSION}/xml/features%mvn:org.opendaylight.integration/features-integration-index/${BUNDLEVERSION}/xml/features,mvn:org.opendaylight.integration/features-integration-test/${BUNDLEVERSION}/xml/features,mvn:org.apache.karaf.decanter/apache-karaf-decanter/1.0.0/xml/features%g" \${FEATURESCONF}
cat \${FEATURESCONF}
if [ "${ODL_ENABLE_L3_FWD}" == "yes" ]; then
- echo "ovsdb.l3.fwd.enabled=yes" >> \${CUSTOMPROP}
+ echo "Enable the l3.fwd in custom.properties..."
+ echo "ovsdb.l3.fwd.enabled=yes" >> \${CUSTOMPROP}
fi
cat \${CUSTOMPROP}
LOGCONF=/tmp/${BUNDLEFOLDER}/etc/org.ops4j.pax.logging.cfg
sed -ie 's/log4j.appender.out.maxBackupIndex=10/log4j.appender.out.maxBackupIndex=1/g' \${LOGCONF}
# FIXME: Make log size limit configurable from build parameter.
-sed -ie 's/log4j.appender.out.maxFileSize=1MB/log4j.appender.out.maxFileSize=100GB/g' \${LOGCONF}
+sed -ie 's/log4j.appender.out.maxFileSize=1MB/log4j.appender.out.maxFileSize=30GB/g' \${LOGCONF}
+echo "log4j.logger.org.opendaylight.yangtools.yang.parser.repo.YangTextSchemaContextResolver = WARN" >> \${LOGCONF}
cat \${LOGCONF}
echo "Configure java home and max memory..."
cat \${MEMCONF}
echo "Listing all open ports on controller system..."
-netstat -natu
+netstat -pnatu
echo "Set Java version"
sudo /usr/sbin/alternatives --install /usr/bin/java java ${JAVA_HOME}/bin/java 1
sudo /usr/sbin/alternatives --set java ${JAVA_HOME}/bin/java
-echo "JDK default version ..."
+echo "JDK default version..."
java -version
echo "Set JAVA_HOME"
-export JAVA_HOME="$JAVA_HOME"
+export JAVA_HOME="${JAVA_HOME}"
# Did you know that in HERE documents, single quote is an ordinary character, but backticks are still executing?
JAVA_RESOLVED=\`readlink -e "\${JAVA_HOME}/bin/java"\`
echo "Java binary pointed at by JAVA_HOME: \${JAVA_RESOLVED}"
+if [ "${ENABLE_HAPROXY_FOR_NEUTRON}" == "yes" ]; then
+
+ # Copy shard file if exists
+ if [ -f /tmp/custom_shard_config.txt ]; then
+ echo "Custom shard config exists!!!"
+ echo "Copying the shard config..."
+ cp /tmp/custom_shard_config.txt /tmp/${BUNDLEFOLDER}/bin/
+ fi
+
+ echo "Configuring cluster"
+ /tmp/${BUNDLEFOLDER}/bin/configure_cluster.sh \$1 \$2
+
+ echo "Dump akka.conf"
+ cat ${AKKACONF}
+
+ echo "Dump modules.conf"
+ cat ${MODULESCONF}
+
+ echo "Dump module-shards.conf"
+ cat ${MODULESHARDSCONF}
+fi
+
+EOF
+
+# Create the startup script to be run on controller.
+cat > ${WORKSPACE}/startup-script.sh <<EOF
+
+echo "Redirecting karaf console output to karaf_console.log"
+export KARAF_REDIRECT="/tmp/${BUNDLEFOLDER}/data/log/karaf_console.log"
+
echo "Starting controller..."
/tmp/${BUNDLEFOLDER}/bin/start
+EOF
+
+cat > ${WORKSPACE}/post-startup-script.sh <<EOF
+
echo "Waiting for controller to come up..."
COUNT="0"
while true; do
RESP="\$( curl --user admin:admin -sL -w "%{http_code} %{url_effective}\\n" http://localhost:8181/restconf/modules -o /dev/null )"
echo \$RESP
- if [[ \$RESP == *"200"* ]]; then
+ if [ "${ENABLE_HAPROXY_FOR_NEUTRON}" == "yes" ]; then
+ SHARD="\$( curl --user admin:admin -sL -w "%{http_code} %{url_effective}\\n" http://localhost:8181/jolokia/read/org.opendaylight.controller:Category=Shards,name=\member-\$1-shard-inventory-config,type=DistributedConfigDatastore)"
+ echo \$SHARD
+ fi
+ if ([[ \$RESP == *"200"* ]] && ([[ "${ENABLE_HAPROXY_FOR_NEUTRON}" != "yes" ]] || [[ \$SHARD == *'"status":200'* ]])); then
echo Controller is UP
break
elif (( "\$COUNT" > "600" )); then
echo "Dumping last 500K bytes of karaf log..."
tail --bytes=500K "/tmp/${BUNDLEFOLDER}/data/log/karaf.log"
echo "Listing all open ports on controller system"
- netstat -natu
+ netstat -pnatu
exit 1
else
COUNT=\$(( \${COUNT} + 5 ))
fi
done
-echo "Cool down for ${COOLDOWN_PERIOD} seconds :)..."
-sleep ${COOLDOWN_PERIOD}
-
echo "Listing all open ports on controller system..."
-netstat -natu
+netstat -pnatu
function exit_on_log_file_message {
echo "looking for \"\$1\" in log file"
- if grep --quiet "\$1" /tmp/${BUNDLEFOLDER}/data/log/karaf.log; then
+ if grep --quiet "\$1" "/tmp/${BUNDLEFOLDER}/data/log/karaf.log"; then
echo ABORTING: found "\$1"
echo "Dumping first 500K bytes of karaf log..."
head --bytes=500K "/tmp/${BUNDLEFOLDER}/data/log/karaf.log"
EOF
-scp ${WORKSPACE}/controller-script.sh ${ODL_SYSTEM_IP}:/tmp
-ssh ${ODL_SYSTEM_IP} 'bash /tmp/controller-script.sh'
+[ "$NUM_OPENSTACK_SITES" ] || NUM_OPENSTACK_SITES=1
+NUM_ODLS_PER_SITE=$((NUM_ODL_SYSTEM / NUM_OPENSTACK_SITES))
+for i in `seq 1 ${NUM_OPENSTACK_SITES}`
+do
+ # Get full list of ODL nodes for this site
+ odl_node_list=
+ for j in `seq 1 ${NUM_ODLS_PER_SITE}`
+ do
+ odl_ip=ODL_SYSTEM_$(((i - 1) * NUM_ODLS_PER_SITE + j))_IP
+ odl_node_list="${odl_node_list} ${!odl_ip}"
+ done
+
+ for j in `seq 1 ${NUM_ODLS_PER_SITE}`
+ do
+ odl_ip=ODL_SYSTEM_$(((i - 1) * NUM_ODLS_PER_SITE + j))_IP
+ # Copy over the config script to controller and execute it (parameters are used only for cluster)
+ echo "Execute the configuration script on controller ${!odl_ip} for index $j with node list ${odl_node_list}"
+ scp ${WORKSPACE}/configuration-script.sh ${!odl_ip}:/tmp
+ ssh ${!odl_ip} "bash /tmp/configuration-script.sh ${j} '${odl_node_list}'"
+ done
+done
+
+echo "Locating config plan to use..."
+configplan_filepath="${WORKSPACE}/test/csit/configplans/${STREAMTESTPLAN}"
+if [ ! -f "${configplan_filepath}" ]; then
+ configplan_filepath="${WORKSPACE}/test/csit/configplans/${TESTPLAN}"
+fi
+
+if [ -f "${configplan_filepath}" ]; then
+ echo "configplan exists!!!"
+ echo "Changing the configplan path..."
+ cat ${configplan_filepath} | sed "s:integration:${WORKSPACE}:" > configplan.txt
+ cat configplan.txt
+ for line in $( egrep -v '(^[[:space:]]*#|^[[:space:]]*$)' configplan.txt ); do
+ echo "Executing ${line}..."
+ source ${line}
+ done
+fi
+
+# Copy over the startup script to controller and execute it.
+for i in `seq 1 ${NUM_ODL_SYSTEM}`
+do
+ CONTROLLERIP=ODL_SYSTEM_${i}_IP
+ echo "Execute the startup script on controller ${!CONTROLLERIP}"
+ scp ${WORKSPACE}/startup-script.sh ${!CONTROLLERIP}:/tmp
+ ssh ${!CONTROLLERIP} "bash /tmp/startup-script.sh"
+done
+
+seed_index=1
+for i in `seq 1 ${NUM_ODL_SYSTEM}`
+do
+ CONTROLLERIP=ODL_SYSTEM_${i}_IP
+ echo "Execute the post startup script on controller ${!CONTROLLERIP}"
+ scp ${WORKSPACE}/post-startup-script.sh ${!CONTROLLERIP}:/tmp
+ ssh ${!CONTROLLERIP} "bash /tmp/post-startup-script.sh $(( seed_index++ ))"
+ if [ $(( $i % (${NUM_ODL_SYSTEM} / ${NUM_OPENSTACK_SITES}) )) == 0 ]; then
+ seed_index=1
+ fi
+done
+
+echo "Cool down for ${COOLDOWN_PERIOD} seconds :)..."
+sleep ${COOLDOWN_PERIOD}
+
+echo "Generating controller variables..."
+for i in `seq 1 ${NUM_ODL_SYSTEM}`
+do
+ CONTROLLERIP=ODL_SYSTEM_${i}_IP
+ odl_variables=${odl_variables}" -v ${CONTROLLERIP}:${!CONTROLLERIP}"
+ echo "Lets's take the karaf thread dump"
+ KARAF_PID=$(ssh ${!CONTROLLERIP} "ps aux | grep ${KARAF_ARTIFACT} | grep -v grep | tr -s ' ' | cut -f2 -d' '")
+ ssh ${!CONTROLLERIP} "jstack $KARAF_PID"> ${WORKSPACE}/karaf_${i}_threads_before.log || true
+done
if [ ${NUM_OPENSTACK_SYSTEM} -gt 0 ]; then
echo "Exiting without running tests to deploy openstack for testing"
exit
fi
+echo "Generating mininet variables..."
+for i in `seq 1 ${NUM_TOOLS_SYSTEM}`
+do
+ MININETIP=TOOLS_SYSTEM_${i}_IP
+ tools_variables=${tools_variables}" -v ${MININETIP}:${!MININETIP}"
+done
+
echo "Locating test plan to use..."
testplan_filepath="${WORKSPACE}/test/csit/testplans/${STREAMTESTPLAN}"
if [ ! -f "${testplan_filepath}" ]; then
SUITES=$( egrep -v '(^[[:space:]]*#|^[[:space:]]*$)' testplan.txt | tr '\012' ' ' )
echo "Starting Robot test suites ${SUITES} ..."
-pybot -N ${TESTPLAN} -c critical -e exclude -v BUNDLEFOLDER:${BUNDLEFOLDER} -v WORKSPACE:/tmp \
--v JAVA_HOME:${JAVA_HOME} -v BUNDLE_URL:${ACTUALBUNDLEURL} -v NEXUSURL_PREFIX:${NEXUSURL_PREFIX} \
+pybot -N ${TESTPLAN} --removekeywords wuks -c critical -e exclude -v BUNDLEFOLDER:${BUNDLEFOLDER} -v WORKSPACE:/tmp \
+-v JAVA_HOME:${JAVA_HOME} -v BUNDLE_URL:${ACTUAL_BUNDLE_URL} -v NEXUSURL_PREFIX:${NEXUSURL_PREFIX} \
-v CONTROLLER:${ODL_SYSTEM_IP} -v ODL_SYSTEM_IP:${ODL_SYSTEM_IP} -v ODL_SYSTEM_1_IP:${ODL_SYSTEM_IP} \
-v CONTROLLER_USER:${USER} -v ODL_SYSTEM_USER:${USER} \
-v TOOLS_SYSTEM_IP:${TOOLS_SYSTEM_IP} -v TOOLS_SYSTEM_2_IP:${TOOLS_SYSTEM_2_IP} -v TOOLS_SYSTEM_3_IP:${TOOLS_SYSTEM_3_IP} \
-v TOOLS_SYSTEM_4_IP:${TOOLS_SYSTEM_4_IP} -v TOOLS_SYSTEM_5_IP:${TOOLS_SYSTEM_5_IP} -v TOOLS_SYSTEM_6_IP:${TOOLS_SYSTEM_6_IP} \
--v TOOLS_SYSTEM_USER:${USER} -v JDKVERSION:${JDKVERSION} -v ODL_STREAM:${DISTROSTREAM} \
+-v TOOLS_SYSTEM_USER:${USER} -v JDKVERSION:${JDKVERSION} -v ODL_STREAM:${DISTROSTREAM} -v NUM_ODL_SYSTEM:${NUM_ODL_SYSTEM} \
-v MININET:${TOOLS_SYSTEM_IP} -v MININET1:${TOOLS_SYSTEM_2_IP} -v MININET2:${TOOLS_SYSTEM_3_IP} \
-v MININET3:${TOOLS_SYSTEM_4_IP} -v MININET4:${TOOLS_SYSTEM_5_IP} -v MININET5:${TOOLS_SYSTEM_6_IP} \
-v MININET_USER:${USER} -v USER_HOME:${HOME} ${TESTOPTIONS} ${SUITES} || true
# FIXME: Sort (at least -v) options alphabetically.
-echo "Killing ODL and fetching Karaf log..."
-set +e # We do not want to create red dot just because something went wrong while fetching logs.
-ssh "${ODL_SYSTEM_IP}" bash -c 'ps axf | grep karaf | grep -v grep | awk '"'"'{print "kill -9 " $1}'"'"' | sh'
+echo "Examining the files in data/log and checking filesize"
+ssh ${ODL_SYSTEM_IP} "ls -altr /tmp/${BUNDLEFOLDER}/data/log/"
+ssh ${ODL_SYSTEM_IP} "du -hs /tmp/${BUNDLEFOLDER}/data/log/*"
+
+for i in `seq 1 ${NUM_ODL_SYSTEM}`
+do
+ CONTROLLERIP=ODL_SYSTEM_${i}_IP
+ echo "Lets's take the karaf thread dump again..."
+ KARAF_PID=$(ssh ${!CONTROLLERIP} "ps aux | grep ${KARAF_ARTIFACT} | grep -v grep | tr -s ' ' | cut -f2 -d' '")
+ ssh ${!CONTROLLERIP} "jstack $KARAF_PID"> ${WORKSPACE}/karaf_${i}_threads_after.log || true
+ echo "Killing ODL"
+ set +e # We do not want to create red dot just because something went wrong while fetching logs.
+ ssh "${!CONTROLLERIP}" bash -c 'ps axf | grep karaf | grep -v grep | awk '"'"'{print "kill -9 " $1}'"'"' | sh'
+done
+
sleep 5
-scp "${ODL_SYSTEM_IP}:/tmp/${BUNDLEFOLDER}/data/log/karaf.log" .
+for i in `seq 1 ${NUM_ODL_SYSTEM}`
+do
+ CONTROLLERIP=ODL_SYSTEM_${i}_IP
+ echo "Compressing karaf.log ${i}"
+ ssh ${!CONTROLLERIP} gzip --best /tmp/${BUNDLEFOLDER}/data/log/karaf.log
+ echo "Fetching compressed karaf.log ${i}"
+ scp "${!CONTROLLERIP}:/tmp/${BUNDLEFOLDER}/data/log/karaf.log.gz" "odl${i}_karaf.log.gz"
+ # TODO: Should we compress the output log file as well?
+ scp "${!CONTROLLERIP}:/tmp/${BUNDLEFOLDER}/data/log/karaf_console.log" "odl${i}_karaf_console.log"
+done
+
true # perhaps Jenkins is testing last exit code
# vim: ts=4 sw=4 sts=4 et ft=sh :
Code Review / releng / builder.git / blobdiff