echo "showing recent changes that made it in to the distribution used by this job"
pip install --upgrade urllib3
python ${WORKSPACE}/test/tools/distchanges/changes.py -d /tmp/distribution_folder \
- -u ${ACTUALBUNDLEURL} -b ${DISTROBRANCH} \
+ -u ${ACTUAL_BUNDLE_URL} -b ${DISTROBRANCH} \
-r ssh://jenkins-${SILO}@git.opendaylight.org:29418 || true
echo "#################################################"
ENABLE_PLUGIN_ARGS="${DEVSTACK_KUBERNETES_PLUGIN_REPO} master" # note: kuryr-kubernetes only exists in master at the moment
elif [ "$plugin_name" == "neutron-lbaas" ]; then
ENABLE_PLUGIN_ARGS="${DEVSTACK_LBAAS_PLUGIN_REPO} ${OPENSTACK_BRANCH}"
+elif [ "$plugin_name" == "networking-sfc" ]; then
+ ENABLE_PLUGIN_ARGS="${DEVSTACK_NETWORKING_SFC_PLUGIN_REPO} ${OPENSTACK_BRANCH}"
else
echo "Error: Invalid plugin $plugin_name, unsupported"
continue
ODL_MGR_IP=${MGRIP}
NEUTRON_LBAAS_SERVICE_PROVIDERV2=${LBAAS_SERVICE_PROVIDER} # Only relevant if neutron-lbaas plugin is enabled
+NEUTRON_SFC_DRIVERS=${ODL_SFC_DRIVER} # Only relevant if networking-sfc plugin is enabled
+NEUTRON_FLOWCLASSIFIER_DRIVERS=${ODL_SFC_DRIVER} # Only relevant if networking-sfc plugin is enabled
EOF
if [ "${ENABLE_NETWORKING_L2GW}" == "yes" ]; then
PUBLIC_INTERFACE=br100
EOF
-if [ -z ${DISABLE_ODL_L3_PLUGIN} ] || [ "${DISABLE_ODL_L3_PLUGIN}" == "no" ]; then
if [ "${ODL_ML2_BRANCH}" == "stable/mitaka" ]; then
cat >> ${local_conf_file_name} << EOF
Q_L3_ENABLED=True
ODL_L3=${ODL_L3}
+
+EOF
+if [ "${ENABLE_NETWORKING_L2GW}" == "yes" ]; then
+cat >> ${local_conf_file_name} << EOF
[[post-config|\$NEUTRON_CONF]]
[DEFAULT]
-service_plugins = networking_odl.l3.l3_odl.OpenDaylightL3RouterPlugin
+service_plugins = networking_odl.l3.l3_odl.OpenDaylightL3RouterPlugin, networking_l2gw.services.l2gateway.plugin.L2GatewayPlugin
EOF
+else
+cat >> ${local_conf_file_name} << EOF
+[[post-config|\$NEUTRON_CONF]]
+[DEFAULT]
+service_plugins = networking_odl.l3.l3_odl.OpenDaylightL3RouterPlugin
+EOF
+fi #check for ENABLE_NETWORKING_L2GW
+
fi #check for ODL_ML2_BRANCH
-fi #check for DISABLE_ODL_L3_PLUGIN
fi #ODL_ENABLE_L3_FWD check
scp extra_debug.sh ${!OS_CTRL_IP}:/tmp
${SSH} ${!OS_CTRL_IP} "bash /tmp/extra_debug.sh > /tmp/extra_debug.log"
scp ${!OS_CTRL_IP}:/tmp/extra_debug.log ${OS_CTRL_FOLDER}/extra_debug.log
+ scp ${!OS_CTRL_IP}:/tmp/*.xz ${OS_CTRL_FOLDER}/
mv local.conf_control_${!OS_CTRL_IP} ${OS_CTRL_FOLDER}/local.conf
mv ${OS_CTRL_FOLDER} ${WORKSPACE}/archives/
done
scp extra_debug.sh ${!OSIP}:/tmp
${SSH} ${!OSIP} "bash /tmp/extra_debug.sh > /tmp/extra_debug.log"
scp ${!OSIP}:/tmp/extra_debug.log ${OS_COMPUTE_FOLDER}/extra_debug.log
+ scp ${!OSIP}:/tmp/*.xz ${OS_COMPUTE_FOLDER}/
mv local.conf_compute_${!OSIP} ${OS_COMPUTE_FOLDER}/local.conf
mv ${OS_COMPUTE_FOLDER} ${WORKSPACE}/archives/
done
# will be the same as the number of openstack systems. However, if we are doing multinode openstack then the
# assumption is we have a single control node and the rest are compute nodes, so the number of expected hypervisors
# is one less than the total number of openstack systems
- if [ $((NUM_OPENSTACK_SYSTEM / NUM_OPENSTACK_SITES - 1)) -eq 1 ]; then
+ if [ $((NUM_OPENSTACK_SYSTEM / NUM_OPENSTACK_SITES)) -eq 1 ]; then
expected_num_hypervisors=1
else
expected_num_hypervisors=${NUM_COMPUTES_PER_SITE}
fi
# Control Node - PUBLIC_BRIDGE will act as the external router
- GATEWAY_IP="10.10.10.250" # FIXME this should be a parameter, also shared with integration-test
- GATEWAY_VLAN_ID=167
+ # Parameter values below are used in integration/test - changing them requires updates in intergration/test as well
+ EXTNET_GATEWAY_IP="10.10.10.250"
+ EXTNET_VLAN_ID=167
+ EXTNET_INTERNET_IP="10.9.9.9"
+ EXTNET_PNF_IP="10.10.10.253"
if [[ ${CONTROLLERFEATURES} == *"odl-ovsdb-openstack"* ]]; then
- ${SSH} ${!CONTROLIP} "sudo ifconfig ${PUBLIC_BRIDGE} up ${GATEWAY_IP}/24"
+ ${SSH} ${!CONTROLIP} "sudo ifconfig ${PUBLIC_BRIDGE} up ${EXTNET_GATEWAY_IP}/24"
else
- ${SSH} ${!CONTROLIP} "sudo ip link add link ${PUBLIC_BRIDGE} name ${PUBLIC_BRIDGE}.${GATEWAY_VLAN_ID} type vlan id ${GATEWAY_VLAN_ID}"
+ ${SSH} ${!CONTROLIP} "sudo ip link add link ${PUBLIC_BRIDGE} name ${PUBLIC_BRIDGE}.${EXTNET_VLAN_ID} type vlan id ${EXTNET_VLAN_ID}"
${SSH} ${!CONTROLIP} "sudo ifconfig ${PUBLIC_BRIDGE} up"
- ${SSH} ${!CONTROLIP} "sudo ifconfig ${PUBLIC_BRIDGE}.${GATEWAY_VLAN_ID} up ${GATEWAY_IP}/24"
+ ${SSH} ${!CONTROLIP} "sudo ifconfig ${PUBLIC_BRIDGE}.${EXTNET_VLAN_ID} up ${EXTNET_GATEWAY_IP}/24"
+
+ # Control Node - external net PNF simulation
+ ${SSH} ${!CONTROLIP} "
+ sudo ip netns add pnf_ns;
+ sudo ip link add pnf_veth0 type veth peer name pnf_veth1;
+ sudo ip link set pnf_veth1 netns pnf_ns;
+ sudo ip link set pnf_veth0 up;
+ sudo ip netns exec pnf_ns ifconfig pnf_veth1 up;
+ sudo ip netns exec pnf_ns ip link add link pnf_veth1 name pnf_veth1.${EXTNET_VLAN_ID} type vlan id ${EXTNET_VLAN_ID};
+ sudo ip netns exec pnf_ns ifconfig pnf_veth1.${EXTNET_VLAN_ID} up ${EXTNET_PNF_IP}/24;
+ sudo ovs-vsctl add-port ${PUBLIC_BRIDGE} pnf_veth0;
+ "
+
+ # Control Node - external net internet address simulation
+ ${SSH} ${!CONTROLIP} "
+ sudo ip tuntap add dev internet_tap mode tap;
+ sudo ifconfig internet_tap up ${EXTNET_INTERNET_IP}/24;
+ "
fi
# Computes
# please add pybot -v arguments on a single line and alphabetized
pybot -N ${TESTPLAN} --removekeywords wuks -c critical -e exclude \
-v BUNDLEFOLDER:${BUNDLEFOLDER} \
- -v BUNDLE_URL:${ACTUALBUNDLEURL} \
+ -v BUNDLE_URL:${ACTUAL_BUNDLE_URL} \
-v CONTROLLER_USER:${USER} \
-v DEVSTACK_DEPLOY_PATH:/opt/stack/devstack \
-v HA_PROXY_IP:${HA_PROXY_IP} \
-v NUM_OPENSTACK_SITES:${NUM_OPENSTACK_SITES} \
-v NUM_OS_SYSTEM:${NUM_OPENSTACK_SYSTEM} \
-v NUM_TOOLS_SYSTEM:${NUM_TOOLS_SYSTEM} \
+ -v ODL_SNAT_MODE:${ODL_SNAT_MODE} \
-v ODL_STREAM:${DISTROSTREAM} \
-v ODL_SYSTEM_IP:${ODL_SYSTEM_IP} \
-v ODL_SYSTEM_1_IP:${ODL_SYSTEM_1_IP} \
Code Review / releng / builder.git / blobdiff