Merge "Configure tep-ip for genius auto tunnels"

[releng/builder.git] / jjb / integration / integration-deploy-openstack-run-test.sh

diff --git a/jjb/integration/integration-deploy-openstack-run-test.sh b/jjb/integration/integration-deploy-openstack-run-test.sh
index 2dd6bd5b80a8113667bd6e7f5014ec54fcc1dfb7..4d331abd32f15dc9c71fef12054c5c56152f5fdc 100644 (file)
--- a/jjb/integration/integration-deploy-openstack-run-test.sh
+++ b/jjb/integration/integration-deploy-openstack-run-test.sh
@@ -497,12 +497,10 @@ EOF
         scp ${!CONTROLLERIP}:/tmp/odl${i}_zrpcd.log.tar ${NODE_FOLDER}
         tar -xvf ${NODE_FOLDER}/odl${i}_karaf.log.tar -C ${NODE_FOLDER} --strip-components 2 --transform s/karaf/odl${i}_karaf/g
         grep "ROBOT MESSAGE\| ERROR " ${NODE_FOLDER}/odl${i}_karaf.log > ${NODE_FOLDER}/odl${i}_err.log
-        # Print ROBOT lines, Print Caused by...Exception: lines,
-        # Print Exception{ lines as well as the previous line that has the timestamp for context
-        sed -n -e '/ROBOT MESSAGE/P' -e '/Caused by.*Exception:/P' -e '$!N;/Exception:/P;D' -e '$!N;/Exception{/P;D' \
-            ${NODE_FOLDER}/odl${i}_karaf.log > ${NODE_FOLDER}/odl${i}_exception.log
         grep "ROBOT MESSAGE\| ERROR \| WARN \|Exception" \
             ${NODE_FOLDER}/odl${i}_karaf.log > ${NODE_FOLDER}/odl${i}_err_warn_exception.log
+        # Print ROBOT lines and print Exception lines. For exception lines also print the previous line for context
+        sed -n -e '/ROBOT MESSAGE/P' -e '$!N;/Exception/P;D' ${NODE_FOLDER}/odl${i}_karaf.log > ${NODE_FOLDER}/odl${i}_exception.log
         rm ${NODE_FOLDER}/odl${i}_karaf.log.tar
         mv karaf_${i}_threads* ${NODE_FOLDER}
         mv ${NODE_FOLDER} ${WORKSPACE}/archives/
@@ -677,6 +675,43 @@ function get_service () {
     set -e
 }
 
+# Check if rabbitmq is ready by looking for a pid in it's status.
+# The function returns the status of the grep command which callers can check.
+function is_rabbitmq_ready() {
+    local -r ip=$1
+    rm -f rabbit.txt
+    ${SSH} ${ip} "sudo rabbitmqctl status" > rabbit.txt
+    grep pid rabbit.txt
+}
+
+# retry the given command ($3) until success for a number of iterations ($1)
+# sleeping ($2) between tries.
+function retry() {
+    set +e
+    local -r -i max_tries=${1}
+    local -r -i sleep_time=${2}
+    local -r cmd=${3}
+    local -i retries=1
+    local -i rc=1
+    while true; do
+        echo "retry ${cmd}: attempt: ${retries}"
+        ${cmd}
+        rc=$?
+        if ((${rc} == 0)); then
+            break;
+        else
+            if ((${retries} == ${max_tries})); then
+                break
+            else
+                ((retries++))
+                sleep ${sleep_time}
+            fi
+        fi
+    done
+    set -e
+    return ${rc}
+}
+
 # if we are using the new netvirt impl, as determined by the feature name
 # odl-netvirt-openstack (note: old impl is odl-ovsdb-openstack) then we
 # want PROVIDER_MAPPINGS to be used -- this should be fixed if we want to support
@@ -834,9 +869,17 @@ done
 # AccessRefused: (0, 0): (403) ACCESS_REFUSED - Login was refused using authentication mechanism AMQPLAIN. For details see the broker logfile.
 # Compare that timestamp to this log in the control stack.log: sudo rabbitmqctl set_permissions -p nova_cell1 stackrabbit
 # If the n-cpu.log is earlier than the control stack.log timestamp then the failure condition is likely hit.
-# TODO: modify devstack to wait for rabbitmq to be available on the controller before starting nova-compute.
-echo "Sleeping for 360s to allow controller to create nova_cell1 before the computes need it"
-sleep 360
+
+echo "Wait a maximum of 30m until rabbitmq is ready to allow the controller to create nova_cell1 before the computes need it"
+retry 30 60 "is_rabbitmq_ready ${OPENSTACK_CONTROL_NODE_1_IP}"
+rc=$?
+if ((${rc} == 0)); then
+    echo "rabbitmq is ready, starting ${NUM_OPENSTACK_COMPUTE_NODES} compute(s)"
+else
+    echo "rabbitmq was not ready in "
+    collect_logs
+    exit 1
+fi
 
 for i in `seq 1 ${NUM_OPENSTACK_COMPUTE_NODES}`; do
     NUM_COMPUTES_PER_SITE=$((NUM_OPENSTACK_COMPUTE_NODES / NUM_OPENSTACK_SITES))
@@ -1038,6 +1081,10 @@ for i in `seq 1 ${NUM_OPENSTACK_SITES}`; do
         sudo ip netns exec pnf_ns ifconfig pnf_veth1 up ${EXTNET_PNF_IP}/24;
         sudo ovs-vsctl add-port ${PUBLIC_BRIDGE} pnf_veth0;
     "
+    # Control Node - set VXLAN TEP IP for Genius Auto TZ
+    ${SSH} ${!CONTROLIP} "
+        sudo ovs-vsctl set O . external_ids:tep-ip=${!CONTROLIP};
+    "
 
     # Control Node - external net internet address simulation
     ${SSH} ${!CONTROLIP} "
@@ -1058,6 +1105,10 @@ for i in `seq 1 ${NUM_OPENSTACK_SITES}`; do
         ${SSH} $compute_ip "
             sudo ovs-vsctl add-port $PUBLIC_BRIDGE $CONTROLPORT -- set interface $CONTROLPORT type=vxlan options:local_ip=$compute_ip options:remote_ip=${!CONTROLIP} options:dst_port=9876 options:key=flow
         "
+         #Compute Node - set VXLAN TEP IP for Genius Auto TZ
+        ${SSH} $compute_ip "
+            sudo ovs-vsctl set O . external_ids:tep-ip=${compute_ip};
+        "
     done
 done
 
@@ -1089,6 +1140,18 @@ cat testplan.txt
 # Use the testplan if specific SUITES are not defined.
 if [ -z "${SUITES}" ]; then
     SUITES=`egrep -v '(^[[:space:]]*#|^[[:space:]]*$)' testplan.txt | tr '\012' ' '`
+else
+    newsuites=""
+    workpath="${WORKSPACE}/test/csit/suites"
+    for suite in ${SUITES}; do
+        fullsuite="${workpath}/${suite}"
+        if [ -z ${newsuites} ]; then
+            newsuites+=${fullsuite}
+        else
+            newsuites+=" "${fullsuite}
+        fi
+    done
+    SUITES=${newsuites}
 fi
 
 # TODO: run openrc on control node and then scrape the vars from it
@@ -1162,7 +1225,7 @@ for suite in ${SUITES}; do
     ${TESTOPTIONS} ${suite} || true
 done
 #rebot exit codes seem to be different
-rebot --output ${WORKSPACE}/output.xml --log None --report None --merge output_*.xml || true
+rebot --output ${WORKSPACE}/output.xml --log None --report None output_*.xml || true
 
 echo "Examining the files in data/log and checking file size"
 ssh ${ODL_SYSTEM_IP} "ls -altr /tmp/${BUNDLEFOLDER}/data/log/"