Strip include-raw prefix for script files

[releng/builder.git] / jjb / integration / integration-get-slave-addresses.sh

diff --git a/jjb/integration/integration-get-slave-addresses.sh b/jjb/integration/integration-get-slave-addresses.sh
new file mode 100644 (file)
index 0000000..d9c571b
--- /dev/null
+++ b/jjb/integration/integration-get-slave-addresses.sh
@@ -0,0 +1,120 @@
+#!/bin/bash
+# Get the Controller and Tools VM slave addresses
+
+set -x
+
+ODL_SYSTEM=()
+TOOLS_SYSTEM=()
+OPENSTACK_SYSTEM=()
+OPENSTACK_CONTROLLERS=()
+[ "$NUM_OPENSTACK_SITES" ] || NUM_OPENSTACK_SITES=1
+
+OPENSTACK_VENV="/tmp/v/openstack"
+# shellcheck source=/tmp/v/openstack/bin/activate disable=SC1091
+source $OPENSTACK_VENV/bin/activate
+
+ADDR=($(openstack stack show -f json -c outputs "$STACK_NAME" | \
+       jq -r '.outputs[] | select(.output_key | match("^vm_[0-9]+_ips$")) | .output_value | .[]'))
+
+# The next two blocks of code will parse the list of vm IP's hostnames to determine which type of node
+# the vm is: odl, devstack controller or compute, ha_proxy or tools. For the odl node's the hsotname will contain
+# java in the name. The tools nodes are anything left after odl and devstack nodes have been found.
+#
+# The devstack nodes are identified with devstack in the hostname but require more checks to determine the controller
+# node. Heat names the vms as devstack-<index> with index starting at 0. The vms are created in groups of which
+# the openstack jobs create a vm_1_group for the controller and vm_2_group for the other vms such as the compute
+# and ha_proxy nodes. The list of IP addresses for all the created vms is returned in reverse order of the group
+# creation, but ordered within the group. I.E vm_1_group will be created first and named devstack-0, followed by
+# vm_2_group and named devstack-0, devstack-1 and devstack-2. The list of IPs will be: devstack-0 (vm_2_group, compute),
+# devstack-1, devstack-2, devstack-0 (vm_1_group, controller). Notice both the compute and first control node are both
+# named devstack-0. We know the controller because it would be last in the list of IPs. This first block of code will
+# produce two lists: one for the list of potential controllers and the second is a list of all devstack nodes.
+
+for i in "${ADDR[@]}"
+do
+    REMHOST=$(ssh "${i}" hostname)
+    case ${REMHOST} in
+    *java*)
+       ODL_SYSTEM=( "${ODL_SYSTEM[@]}" "${i}" )
+       ;;
+    *devstack*)
+       # track potential controllers which would have -0 at the end of the hostname
+       if [[ ${REMHOST: -2} == "-0" ]]; then
+          OPENSTACK_CONTROLLERS=( "${OPENSTACK_CONTROLLERS[@]}" "${i}" )
+       fi
+
+       OPENSTACK_SYSTEM=( "${OPENSTACK_SYSTEM[@]}" "${i}" )
+       ;;
+    *)
+       TOOLS_SYSTEM=( "${TOOLS_SYSTEM[@]}" "${i}" )
+       ;;
+    esac
+done
+
+echo "NUM_ODL_SYSTEM=${#ODL_SYSTEM[@]}" >> slave_addresses.txt
+echo "NUM_TOOLS_SYSTEM=${#TOOLS_SYSTEM[@]}" >> slave_addresses.txt
+#if HA Proxy is requested the last devstack node will be configured as haproxy
+if [ "${ENABLE_HAPROXY_FOR_NEUTRON}" == "yes" ]; then
+   # HA Proxy is installed on one OPENSTACK_SYSTEM VM on each site
+   NUM_OPENSTACK_SYSTEM=$(( ${#OPENSTACK_SYSTEM[@]} - NUM_OPENSTACK_SITES ))
+else
+   NUM_OPENSTACK_SYSTEM=${#OPENSTACK_SYSTEM[@]}
+fi
+echo "NUM_OPENSTACK_SYSTEM=${NUM_OPENSTACK_SYSTEM}" >> slave_addresses.txt
+
+# Rearrange the devstack node list to place the controller at the beginning of the list. The later code expects
+# the list to be ordered with controller first followed by other types.
+#
+# At this point there is a list of potential devstack controllers as: devstack-0 (vm_2_group, compute),
+# devstack-0 (vm_1_group, controller) and there is the full list with other compute or ha_proxy nodes in the middle.
+# We know the controller is at the end of the devstack nodes list based on the ordering described above. Swap that entry
+# with the first entry.
+if [ ${#OPENSTACK_CONTROLLERS[@]} -eq 2 ]; then
+    ctrl_index=${#OPENSTACK_SYSTEM[@]}
+    ctrl_index=$((ctrl_index -1))
+    tmp_addr=${OPENSTACK_SYSTEM[0]}
+    OPENSTACK_SYSTEM[0]=${OPENSTACK_SYSTEM[$ctrl_index]}
+    OPENSTACK_SYSTEM[$ctrl_index]=$tmp_addr
+fi
+
+# Add alias for ODL_SYSTEM_1_IP as ODL_SYSTEM_IP
+echo "ODL_SYSTEM_IP=${ODL_SYSTEM[0]}" >> slave_addresses.txt
+for i in $(seq 0 $(( ${#ODL_SYSTEM[@]} - 1 )))
+do
+    echo "ODL_SYSTEM_$((i+1))_IP=${ODL_SYSTEM[${i}]}" >> slave_addresses.txt
+done
+
+# Add alias for TOOLS_SYSTEM_1_IP as TOOLS_SYSTEM_IP
+echo "TOOLS_SYSTEM_IP=${TOOLS_SYSTEM[0]}" >> slave_addresses.txt
+for i in $(seq 0 $(( ${#TOOLS_SYSTEM[@]} - 1 )))
+do
+    echo "TOOLS_SYSTEM_$((i+1))_IP=${TOOLS_SYSTEM[${i}]}" >> slave_addresses.txt
+done
+
+openstack_index=0
+# Assuming number of openstack control nodes equals number of openstack sites
+NUM_OPENSTACK_CONTROL_NODES=$(( NUM_OPENSTACK_SITES ))
+echo "NUM_OPENSTACK_CONTROL_NODES=${NUM_OPENSTACK_CONTROL_NODES}" >> slave_addresses.txt
+for i in $(seq 0 $((NUM_OPENSTACK_CONTROL_NODES - 1)))
+do
+    echo "OPENSTACK_CONTROL_NODE_$((i+1))_IP=${OPENSTACK_SYSTEM[$((openstack_index++))]}" >> slave_addresses.txt
+done
+
+# The rest of the openstack nodes until NUM_OPENSTACK_SYSTEM are computes
+NUM_OPENSTACK_COMPUTE_NODES=$(( NUM_OPENSTACK_SYSTEM - NUM_OPENSTACK_CONTROL_NODES ))
+echo "NUM_OPENSTACK_COMPUTE_NODES=${NUM_OPENSTACK_COMPUTE_NODES}" >> slave_addresses.txt
+for i in $(seq 0 $((NUM_OPENSTACK_COMPUTE_NODES - 1)))
+do
+    echo "OPENSTACK_COMPUTE_NODE_$((i+1))_IP=${OPENSTACK_SYSTEM[$((openstack_index++))]}" >> slave_addresses.txt
+done
+
+# The remaining openstack nodes are haproxy nodes (for ODL cluster)
+NUM_OPENSTACK_HAPROXY_NODES=$(( ${#OPENSTACK_SYSTEM[@]} - NUM_OPENSTACK_SYSTEM ))
+echo "NUM_OPENSTACK_HAPROXY_NODES=${NUM_OPENSTACK_HAPROXY_NODES}" >> slave_addresses.txt
+for i in $(seq 0 $((NUM_OPENSTACK_HAPROXY_NODES - 1)))
+do
+    echo "OPENSTACK_HAPROXY_$((i+1))_IP=${OPENSTACK_SYSTEM[$((openstack_index++))]}" >> slave_addresses.txt
+done
+echo "Contents of slave_addresses.txt:"
+cat slave_addresses.txt
+# vim: sw=4 ts=4 sts=4 et ft=sh :