- compare-type: ANT
pattern: '{files}'
+# Macro: integration-csit-only
+# Operation: this macro sets a trigger on reverse job list
+# Used by: csit -only- job templates
+
+- trigger:
+ name: integration-csit-trigger
+ triggers:
+ - reverse:
+ jobs: '{jobs}'
+ result: 'success'
+
# Macro: integration-openstack-controller-mininet
# Operation: this macro will spin the controller and mininet vms
# Used by: {project}-csit-* job templates
- opendaylight-infra-stack:
stack-template: 'csit-3-instance-type.yaml'
+# Macro: integration-infra-stack-4-type
+# Operation: Sets environment and then calls opendaylight-infra-stack to spin
+# up csit lab using openstack-heat.
+# Used by: {project}-csit-* job templates
+
+- builder:
+ name: integration-infra-stack-4-type
+ builders:
+ - integration-cleanup-workspace
+ - shell: |
+ #!/bin/bash
+ # Setup openstack envirnoment file for use by
+ # the opendaylight-infra-stack macro
+ cat > $WORKSPACE/opendaylight-infra-environment.yaml << EOF
+ parameters:
+ vm_0_count: {vm_0_count}
+ vm_0_flavor: {vm_0_flavor}
+ vm_0_image: {vm_0_image}
+ vm_1_count: {vm_1_count}
+ vm_1_flavor: {vm_1_flavor}
+ vm_1_image: {vm_1_image}
+ vm_2_count: {vm_2_count}
+ vm_2_flavor: {vm_2_flavor}
+ vm_2_image: {vm_2_image}
+ vm_3_count: {vm_3_count}
+ vm_3_flavor: {vm_3_flavor}
+ vm_3_image: {vm_3_image}
+ EOF
+ echo "Contents of opendaylight-infra-environment.yaml ..."
+ cat $WORKSPACE/opendaylight-infra-environment.yaml
+ - opendaylight-infra-stack:
+ stack-template: 'csit-4-instance-type.yaml'
+
# Macro: integration-get-slave-addresses
# Operation: this macro gets the IP addresses of the dynamic vms
# Used by: {project}-csit-* job templates
- builder:
name: integration-get-slave-addresses
builders:
- - shell: !include-raw: include-raw-integration-get-slave-addresses.sh
+ - shell: !include-raw: integration-get-slave-addresses.sh
- builder:
name: integration-set-variables
- builder:
name: integration-deploy-controller-run-test
builders:
- - shell: !include-raw: include-raw-integration-deploy-controller-run-test.sh
+ - shell: !include-raw: integration-deploy-controller-run-test.sh
# Macro: integration-configure-clustering
# Operation: this macro configures the clustering
- builder:
name: integration-configure-clustering
builders:
- - shell: !include-raw: include-raw-integration-configure-clustering.sh
+ - shell: !include-raw: integration-configure-clustering.sh
# Macro: integration-start-cluster-run-test
# Operation: this macro starts the 3-node cluster and runs test
- builder:
name: integration-start-cluster-run-test
builders:
- - shell: !include-raw: include-raw-integration-start-cluster-run-test.sh
+ - shell: !include-raw: integration-start-cluster-run-test.sh
# Macro: integration-install-robotframework
# Operation: Installs robotframework using pip to a virtualenv
- builder:
name: integration-install-robotframework
builders:
- - shell: !include-raw: include-raw-integration-install-robotframework.sh
+ - shell: !include-raw: integration-install-robotframework.sh
# Macro: integration-cleanup-tmp
# Operation: Cleans up temporary files created by build
- builder:
name: integration-cleanup-tmp
builders:
- - shell: !include-raw: include-raw-integration-cleanup-tmp.sh
+ - shell: !include-raw: integration-cleanup-tmp.sh
# Macro: integration-multipatch-builder
# Operation: checks out multiple patches and builds custom distribution
- builder:
name: integration-multipatch-builder
builders:
- - shell: !include-raw: include-raw-integration-multipatch-distribution-test.sh
+ - shell: !include-raw: multipatch-distribution.sh
# Macro: integration-cleanup-workspace
# Operation: Cleans up files possibly left there by the previous build
- builder:
name: integration-cleanup-workspace
builders:
- - shell: !include-raw: include-raw-integration-cleanup-workspace.sh
+ - shell: !include-raw: integration-cleanup-workspace.sh
# Macro: integration-rebase-patch
# Operation: For cloned project, rebase checked-out Gerrit patch onto $DISTROBRANCH.
- builder:
name: integration-rebase-gerrit-patch
builders:
- - shell: !include-raw: include-raw-integration-rebase-gerrit-patch.sh
+ - shell: !include-raw: integration-rebase-gerrit-patch.sh
- builder:
name: integration-deploy-openstack-run-test
builders:
- - shell: !include-raw: include-raw-integration-deploy-openstack-run-test.sh
-
-# Macro: integration-list-jobs
-# Operation: queries Jenkins jobs from jenkins.opendaylight.org and
-# writes a list of the jobs corresponding to the search terms to a file.
-# Used by: builder-merge job template
-#
-# This script requires the following JJB variables to be passed in:
-# {search_string} Job type to act as a primary filter (e.g. csit)
-# {blacklist} List of sub-projects to filter out (e.g. longevity)
-# {stream} Development release name (e.g. boron)
-# {jobs-filename} Filename to write list into (e.g. carbon-jobs.lst)
-# NOTE: Requires xmlstarlet installed on node.
-
-- builder:
- name: integration-list-jobs
- builders:
- - shell: !include-raw: include-raw-integration-list-jobs.sh
-
-# Macro: integration-replace-block-text
-# Operation: using starting and ending regex to
-# replace a block of text in a file with the text in
-# another file. Regex should be basic and work with sed
-# Used by: builder-merge job template
-#
-# This script requires the following JJB variables to be passed in:
-# {starting-regex}
-# {ending-regex}
-# {file-with-changes-to-insert}
-# {file-to-change}
-
-- builder:
- name: integration-replace-block-text
- builders:
- - shell: !include-raw: include-raw-integration-replace-block-text.sh
-
+ - shell: !include-raw: integration-deploy-openstack-run-test.sh
- builder:
name: integration-compare-distributions
# Required bash variables:
# KARAF_ARTIFACT: 'karaf' or 'distribution-karaf'. Use integration-set-variables.
builders:
- - shell: !include-raw: include-raw-integration-compare-distributions.sh
+ - shell: !include-raw: integration-compare-distributions.sh
- builder:
name: integration-upload-distribution
builders:
- config-file-provider:
files:
- - file-id: odl-global-settings
+ - file-id: global-settings
variable: GLOBAL_SETTINGS_FILE
- file-id: integration-settings
variable: SETTINGS_FILE
script-only-if-succeeded: 'False'
script-only-if-failed: 'False'
mark-unstable-if-failed: 'True'
+
+- publisher:
+ name: integration-csit-run-postscript
+ publishers:
+ - postbuildscript:
+ builders:
+ - config-file-provider:
+ files:
+ - file-id: 'odl-elastic-cloud'
+ target: '${HOME}/.netrc'
+ - shell: |
+ #!/bin/bash
+ #The following script runs any configurable postplan stored in test/csit/postplans.
+ if [ -f "${WORKSPACE}/test/csit/postplans/${TESTPLAN}" ]; then
+ echo "postplan exists!!!"
+ echo "Changing the postplan path..."
+ script_name=${WORKSPACE}/test/csit/postplans/${TESTPLAN}
+ cat ${script_name} | sed "s:integration:${WORKSPACE}:" > postplan.txt
+ cat postplan.txt
+ egrep -v '(^[[:space:]]*#|^[[:space:]]*$)' postplan.txt | while read -r line ; do
+ echo "Executing ${line}..."
+ ${line}
+ done
+ fi
+ rm ${HOME}/.netrc
+ script-only-if-succeeded: 'False'
+ script-only-if-failed: 'False'
+ mark-unstable-if-failed: 'True'