+++ /dev/null
-module mef-types {\r
- namespace "http://metroethernetforum.org/ns/yang/mef-types";\r
- prefix mef-types;\r
- organization "Metro Ethernet Forum";\r
- contact\r
- "Web URL: http://metroethernetforum.org/ E-mail: mibs@metroethernetforum.org\r
- Postal: Metro Ethernet Forum 6033 W. Century Boulevard, Suite\r
- 1107 Los Angeles, CA 90045 U.S.A. Phone: +1 310-642-2800 Fax:\r
- +1 310-642-2808";\r
- description\r
- "This module defines the YANG Type Definitions and shared (templated)\r
- groupings of data elementsused by MEF YANG Modules. Reference\r
- Overview: A number of base documents have been used to create\r
- the MEF Types YANG Module. The following are the abbreviations\r
- for the baseline documents: [RFC 6991] refers to IETF RFC 6991\r
- 'Common YANG Data Types', 2013-07-15 [RFC 6643] refers to IETF\r
- RFC 6643 'Translation of Structure of Management Information Version\r
- 2 (SMIv2) MIB Modules to YANG Modules', 2011-11-25 [802.1AB] refers\r
- to 'Station and Media Access Control Connectivity Discovery',\r
- IEEE 802.1AB-2009, September 2009 [802.1q] refers to IEEE 802.1Q-2011\r
- 'IEEE Standard for Local and metropolitan area networks --Media\r
- Access Control (MAC) Bridges and Virtual Bridged Local Area Networks,\r
- August 2011 [802-2001] refers to 'IEEE Standard for Local and\r
- Metropolitan Area Networks: Overview and Architecture', IEEE 802-2001,\r
- February 2002 [MEF10.3] refers to MEF 10.3 'Ethernet Services\r
- Attributes Phase 3', October 2013 [MEF6.2] refers to MEF 6.2 'EVC\r
- Ethernet Services Defintions Phase 3', August 2014 [MEF40] refers\r
- to MEF 40 'UNI and EVC Definition of Managed Objects', April 2013\r
- [MEF45] refers to MEF 45 'Multi-CEN L2CP', August 2014 [MEF7.2]\r
- refers to MEF 7.2 'Carrier Ethernet Management Information Model',\r
- April 2013 [MEF7.3] refers to MEF 7.3 'Carrier Ethernet Management\r
- Information Model', Working Draft #1 2015 [RFC 2737] refers to\r
- IETF RFC 2737 'Entity MIB (Version 2)', December 1999 [RFC 2863]\r
- refers to IETF RFC 2863 'The Interfaces Group MIB', June 2000\r
- [RFC 3419] refers to IETF RFC 3419 'Textual Conventions for Transport\r
- Addresses', December 2002 [Y.1731] refers to ITU-T Y.1731 'OAM\r
- functions and mechanisms for Ethernet based networks', July 2011\r
- [Q.840.1] refers to ITU-T Q.840.1 'Requirements and analysis for\r
- NMS-EMS management interface of Ethernet over Transport and Metro\r
- Ethernet Network(EoT/MEN)' March 2007";\r
- revision 2015-05-26 {\r
- description\r
- "Formal Project Review Draft 1.";\r
- reference "EVC Ethernet Services Definitions YANG Modules " +\r
- "(MEF XX), TBD";\r
- }\r
- identity ieee-8023-interface-type {\r
- description\r
- "Base identity from which specific IEEE 802.3-2012 " +\r
- "interface types are derived. This list was taken " +\r
- "from Section 1.4 'Definitions'.";\r
- }\r
- identity ieee8023-10BASE2 {\r
- base ieee-8023-interface-type;\r
- description\r
- "10BASE2";\r
- }\r
- identity ieee8023-10BASE5 {\r
- base ieee-8023-interface-type;\r
- description\r
- "10BASE5";\r
- }\r
- identity ieee8023-10BASE-F {\r
- base ieee-8023-interface-type;\r
- description\r
- "10BASEF";\r
- }\r
- identity ieee8023-10BASE-FB {\r
- base ieee-8023-interface-type;\r
- description\r
- "10BASE-FB";\r
- }\r
- identity ieee8023-1000BASE-PX-D {\r
- base ieee-8023-interface-type;\r
- description\r
- "1000BASE-PX-D";\r
- }\r
- identity ieee8023-1000BASE-PX-U {\r
- base ieee-8023-interface-type;\r
- description\r
- "1000BASE-PX-U";\r
- }\r
- identity ieee8023-10BASE-FL {\r
- base ieee-8023-interface-type;\r
- description\r
- "10BASE-FL";\r
- }\r
- identity ieee8023-10BASE-FP {\r
- base ieee-8023-interface-type;\r
- description\r
- "10BASE-FP";\r
- }\r
- identity ieee8023-10BASE-T {\r
- base ieee-8023-interface-type;\r
- description\r
- "10BASE-T";\r
- }\r
- identity ieee8023-10BASE-Te {\r
- base ieee-8023-interface-type;\r
- description\r
- "10BASE-Te";\r
- }\r
- identity ieee8023-10BROAD36 {\r
- base ieee-8023-interface-type;\r
- description\r
- "10BROAD36";\r
- }\r
- identity ieee8023-10PASS-TS {\r
- base ieee-8023-interface-type;\r
- description\r
- "10PASS-TS";\r
- }\r
- identity ieee8023-100BASE-BX10 {\r
- base ieee-8023-interface-type;\r
- description\r
- "100BASE-BX10";\r
- }\r
- identity ieee8023-100BASE-FX {\r
- base ieee-8023-interface-type;\r
- description\r
- "100BASE-FX";\r
- }\r
- identity ieee8023-100BASE-LX10 {\r
- base ieee-8023-interface-type;\r
- description\r
- "100BASE-LX10";\r
- }\r
- identity ieee8023-100BASE-T {\r
- base ieee-8023-interface-type;\r
- description\r
- "100BASE-T";\r
- }\r
- identity ieee8023-100BASE-T2 {\r
- base ieee-8023-interface-type;\r
- description\r
- "100BASE-T2";\r
- }\r
- identity ieee8023-100BASE-T4 {\r
- base ieee-8023-interface-type;\r
- description\r
- "100BASE-T4";\r
- }\r
- identity ieee8023-100BASE-TX {\r
- base ieee-8023-interface-type;\r
- description\r
- "100BASE-TX";\r
- }\r
- identity ieee8023-100BASE-X {\r
- base ieee-8023-interface-type;\r
- description\r
- "100BASE-X";\r
- }\r
- identity ieee8023-1000BASE-BX10 {\r
- base ieee-8023-interface-type;\r
- description\r
- "1000BASE-BX10";\r
- }\r
- identity ieee8023-1000BASE-CX {\r
- base ieee-8023-interface-type;\r
- description\r
- "1000BASE-CX";\r
- }\r
- identity ieee8023-1000BASE-KX {\r
- base ieee-8023-interface-type;\r
- description\r
- "1000BASE-KX";\r
- }\r
- identity ieee8023-1000BASE-LX {\r
- base ieee-8023-interface-type;\r
- description\r
- "1000BASE-LX";\r
- }\r
- identity ieee8023-1000BASE-LX10 {\r
- base ieee-8023-interface-type;\r
- description\r
- "1000BASE-LX10";\r
- }\r
- identity ieee8023-1000BASE-PX10 {\r
- base ieee-8023-interface-type;\r
- description\r
- "1000BASE-PX10";\r
- }\r
- identity ieee8023-1000BASE-PX20 {\r
- base ieee-8023-interface-type;\r
- description\r
- "1000BASE-PX20";\r
- }\r
- identity ieee8023-1000BASE-SX {\r
- base ieee-8023-interface-type;\r
- description\r
- "1000BASE-SX";\r
- }\r
- identity ieee8023-1000BASE-T {\r
- base ieee-8023-interface-type;\r
- description\r
- "1000BASE-T";\r
- }\r
- identity ieee8023-1000BASE-X {\r
- base ieee-8023-interface-type;\r
- description\r
- "1000BASE-X";\r
- }\r
- identity ieee8023-10GBASE-CX4 {\r
- base ieee-8023-interface-type;\r
- description\r
- "10GBASE-CX4";\r
- }\r
- identity ieee8023-10GBASE-E {\r
- base ieee-8023-interface-type;\r
- description\r
- "10GBASE-E";\r
- }\r
- identity ieee8023-10GBASE-ER {\r
- base ieee-8023-interface-type;\r
- description\r
- "10GBASE-ER";\r
- }\r
- identity ieee8023-10GBASE-EW {\r
- base ieee-8023-interface-type;\r
- description\r
- "10GBASE-EW";\r
- }\r
- identity ieee8023-10GBASE-KR {\r
- base ieee-8023-interface-type;\r
- description\r
- "10GBASE-KR";\r
- }\r
- identity ieee8023-10GBASE-KX4 {\r
- base ieee-8023-interface-type;\r
- description\r
- "10GBASE-KX4";\r
- }\r
- identity ieee8023-10GBASE-L {\r
- base ieee-8023-interface-type;\r
- description\r
- "10GBASE-L";\r
- }\r
- identity ieee8023-10GBASE-LR {\r
- base ieee-8023-interface-type;\r
- description\r
- "10GBASE-LR";\r
- }\r
- identity ieee8023-10GBASE-LRM {\r
- base ieee-8023-interface-type;\r
- description\r
- "10GBASE-LRM";\r
- }\r
- identity ieee8023-10GBASE-LW {\r
- base ieee-8023-interface-type;\r
- description\r
- "10GBASE-LW";\r
- }\r
- identity ieee8023-10GBASE-LX4 {\r
- base ieee-8023-interface-type;\r
- description\r
- "10GBASE-LX4";\r
- }\r
- identity ieee8023-10GBASE-PR {\r
- base ieee-8023-interface-type;\r
- description\r
- "10GBASE-PR";\r
- }\r
- typedef identifier45 {\r
- type string {\r
- length "min..45";\r
- pattern "[ -~]+";\r
- }\r
- description\r
- "This type definition accepts any visible ASCII character " +\r
- "plus the <space> character.The string must be an RFC 2579 " +\r
- "Display String (RFC 854 ASCII 0.00-0.7f) but not contain " +\r
- "the characters 0.00 through 0.1f. It does not accept " +\r
- "the <delete> character (0.7f) despite the current MEF " +\r
- "specification not disallowing it.";\r
- reference "[MEF10.3] [R8], [R9]. [RFC2579]. [RFC854].";\r
- }\r
- typedef max-svc-frame-size-type {\r
- type uint32 {\r
- range "1522..16384";\r
- }\r
- units "bytes";\r
- description\r
- "Max Frame Size Type in bytes. Service Frames larger than " +\r
- "this size will be discarded.";\r
- reference "[MEF 10.3] Section 8.9 and Section 9.7.";\r
- }\r
- typedef retail-svc-id-type {\r
- type uint32;\r
- description\r
- "General ID used by higher level applications that " +\r
- "connect Subscribers information and SLA's with " +\r
- "configured Ethernet Services.";\r
- reference "[MEF10.3].";\r
- }\r
- typedef svc-provider-type {\r
- type identifier45;\r
- description\r
- "Service Provider Type";\r
- reference "[MEF10.3].";\r
- }\r
- typedef cen-type {\r
- type identifier45;\r
- description\r
- "CEN Type";\r
- reference "[MEF10.3].";\r
- }\r
- typedef subscriber-type {\r
- type identifier45;\r
- description\r
- "Subscriber Type";\r
- reference "[MEF10.3].";\r
- }\r
- typedef evc-id-type {\r
- type identifier45;\r
- description\r
- "EVC ID Type";\r
- reference "[MEF10.3].";\r
- }\r
- typedef simple-percent {\r
- type decimal64 {\r
- fraction-digits 2;\r
- range "0.00 .. 100.00";\r
- }\r
- description "Percent.";\r
- }\r
- typedef vlan-id-type {\r
- type uint32 {\r
- range "1..4094";\r
- }\r
- description\r
- "The VLAN-ID that uniquely identifies a VLAN. This is the " +\r
- "12-bit VLAN-ID used in the VLAN Tag header. The range " +\r
- "is defined by the REFERENCED specification. VLAN ID 0 is " +\r
- "used for VLAN Unaware Mode.";\r
- reference "IEEE Std 802.1Q 2003 Edition, Virtual Bridged " +\r
- "Local Area Networks.";\r
- }\r
- typedef vlan-id-or-none-type {\r
- type uint32 {\r
- range "0..4094";\r
- }\r
- description\r
- "The VLAN-ID that uniquely identifies a VLAN. This is the " +\r
- "12-bit VLAN-ID used in the VLAN Tag header. The range is " +\r
- "defined by the REFERENCED specification. VLAN ID 0 is " +\r
- "used for VLAN Unaware (ie. None) Mode";\r
- reference "IEEE Std 802.1Q 2003 Edition, Virtual Bridged " +\r
- "Local Area Networks.";\r
- }\r
- typedef vlan-id-or-all-type {\r
- type uint32 {\r
- range "1..4095";\r
- }\r
- description\r
- "The VLAN-ID that uniquely identifies a VLAN. This is the " +\r
- "12-bit VLAN-ID used in the VLAN Tag header. The range " +\r
- "is defined by the REFERENCED specification. VLAN ID 4095 " +\r
- "is used for VLAN Any Mode";\r
- reference "IEEE Std 802.1Q 2003 Edition, Virtual Bridged " +\r
- "Local Area Networks.";\r
- }\r
- typedef vlan-id-any-none-type {\r
- type uint32 {\r
- range "0..4095";\r
- }\r
- description\r
- "The VLAN-ID that uniquely identifies a VLAN. This is the " +\r
- "12-bit VLAN-ID used in the VLAN Tag header. The range " +\r
- "is defined by the REFERENCED specification. This " +\r
- "typedef is for use with Operational Status information " +\r
- "where VLAN ID 0 may be used for VLAN Unaware Mode and " +\r
- "use of 4095 is Reserved / None.";\r
- reference "IEEE Std 802.1Q 2003 Edition, Virtual Bridged " +\r
- "Local Area Networks.";\r
- }\r
- typedef ieee-8021-priority {\r
- type uint8 {\r
- range "0..7";\r
- }\r
- description\r
- "An 802.1Q user priority value.";\r
- reference "IEEE 802.1Q";\r
- }\r
- typedef entity-admin-state-type {\r
- type enumeration {\r
- enum "unknown" {\r
- description\r
- "Unknown";\r
- }\r
- enum "locked" {\r
- description\r
- "Locked";\r
- }\r
- enum "shutting-down" {\r
- description\r
- "Shutting Down";\r
- }\r
- enum "unlocked" {\r
- description\r
- "Unlocked";\r
- }\r
- }\r
- description\r
- "Represents the various possible administrative states. " +\r
- "A value of 'locked' means the resource is " +\r
- "administratively prohibited from use. A value of " +\r
- "'shuttingDown' means that usage is administratively " +\r
- "limited to current instances of use.A value of " +\r
- "'unlocked' means the resource is not administratively " +\r
- "prohibited from use.A value of 'unknown' means that " +\r
- "this resource is unable to report administrative state.";\r
- reference "ENTITY-STATE-TC-MIB";\r
- }\r
- typedef performance-metric-type {\r
- type enumeration {\r
- enum "one-way-frame-delay-performance" {\r
- description\r
- "One-way Frame Delay Performance.";\r
- }\r
- enum "one-way-frame-delay-range-performance" {\r
- description\r
- "One-way Frame Delay Range Performance.";\r
- }\r
- enum "one-way-mean-frame-delay-performance" {\r
- description\r
- "One-way Mean Frame Delay Performance.";\r
- }\r
- enum "one-way-inter-frame-delay-variation-performance" {\r
- description\r
- "One-way Inter-Frame Delay Variation Performance.";\r
- }\r
- enum "one-way-frame-loss-ratio-performance" {\r
- description\r
- "One-way Frame Loss Ratio Performance.";\r
- }\r
- enum "one-way-availability-performance" {\r
- description\r
- "One-way Availability Performance.";\r
- }\r
- enum "one-way-resiliency-performance-hli" {\r
- description\r
- "One-way Resiliency Performance expressed as High " +\r
- "Loss Intervals.";\r
- }\r
- enum "one-way-resiliency-performance-chli" {\r
- description\r
- "One-way Resiliency Performance expressed as " +\r
- "Consecutive High Loss Intervals.";\r
- }\r
- enum "one-way-group-availability-performance" {\r
- description\r
- "One-way Group Availability Performance.";\r
- }\r
- enum "one-way-multiple-evc-group-availability-performance" {\r
- description\r
- "One-way Multiple EVC Group Availability Performance.";\r
- }\r
- }\r
- description\r
- "Performance Metrics.";\r
- reference "[MEF10.3] Section 8.8 and Section 11.";\r
- }\r
- typedef evc-type {\r
- type enumeration {\r
- enum "point-to-point" {\r
- description\r
- "Point to Point.";\r
- }\r
- enum "multipoint-to-multipoint" {\r
- description\r
- "Multipoint to Multipoint.";\r
- }\r
- enum "rooted-multipoint" {\r
- description\r
- "Rooted Multipoint.";\r
- }\r
- }\r
- description\r
- "EVC Type";\r
- reference "[MEF10.3] Section 8.1.";\r
- }\r
- typedef ipvc-type {\r
- type enumeration {\r
- enum "multipoint" {\r
- description\r
- "Multipoint.";\r
- }\r
- enum "cloud-access" {\r
- description\r
- "Cloud-access.";\r
- }\r
- enum "rooted-multipoint" {\r
- description\r
- "Rooted Multipoint.";\r
- }\r
- }\r
- description\r
- "IPVC Type";\r
- }\r
- typedef evc-status-type {\r
- type enumeration {\r
- enum "new" {\r
- description\r
- "New.";\r
- }\r
- enum "active" {\r
- description\r
- "Active.";\r
- }\r
- enum "inactive" {\r
- description\r
- "Inactive (Not Active).";\r
- }\r
- enum "partially-active" {\r
- description\r
- "PartiallyActive.";\r
- }\r
- }\r
- description\r
- "EVC Status Type";\r
- reference "[MEF16] Section 5.3.";\r
- }\r
- typedef evc-uni-role-type {\r
- type enumeration {\r
- enum "root" {\r
- description\r
- "Root Role for UNI. Valid setting for all service " +\r
- "types. A UNI set to this value may send frames " +\r
- "to UNIs configured as 'root' or 'leaf'.";\r
- }\r
- enum "leaf" {\r
- description\r
- "Leaf Role for UNI. Valid setting for Root-Multipoint " +\r
- "EVCs only. A UNI set to this value may send frames " +\r
- "to UNIs 'root'.";\r
- }\r
- }\r
- description\r
- "This object configures UNI type on an EVC.";\r
- reference "[MEF10.3] Section 8.1.2.1.";\r
- }\r
- typedef data-svc-frame-delivery-type {\r
- type enumeration {\r
- enum "discard" {\r
- description\r
- "Service Frames are discarded.";\r
- }\r
- enum "unconditional" {\r
- description\r
- "Service Frames are unconditionally delivered no matter the content\r
- of the Service Frame. An example of this is a Point-to-Point EVC";\r
- }\r
- enum "conditional" {\r
- description\r
- "Service Frame are conditionally delivered to the destination\r
- UNI. The condition is specified, for example via a bandwidth profile\r
- or unicast MAC address learning.";\r
- }\r
- }\r
- description\r
- "A MEF service can have one of three different " +\r
- "delivery types.";\r
- }\r
- typedef uni-resiliency-type {\r
- type enumeration {\r
- enum "none" {\r
- description\r
- "No protection mechanism defined.";\r
- }\r
- enum "dual-link-aggregation" {\r
- description\r
- "Protection mechanism is Link Aggreg- ation as specified in [802.3],\r
- with one link in active mode and one link in standby mode.";\r
- }\r
- enum "other" {\r
- description\r
- "Protection method defined that is not Link Aggregation active/standby\r
- mode.";\r
- }\r
- }\r
- description\r
- "This object type of resiliency mechanism for a " +\r
- "specific UNI.";\r
- }\r
- typedef svc-frame-format-type {\r
- type enumeration {\r
- enum "no-tag" {\r
- description\r
- "No-tag indicates that all data on the interface is " +\r
- "as untagged data.";\r
- }\r
- enum "ctag" {\r
- description\r
- "Ctag indicates that tagged data is associated with " +\r
- "CE-VLAN ID or a C-TAG.";\r
- }\r
- enum "stag" {\r
- description\r
- "Stag indicates that tagged data is associated with " +\r
- "a provider tag or S-TAG.";\r
- }\r
- enum "stag-ctag" {\r
- description\r
- "Stag-ctag indicates that service traffic identified " +\r
- "with both an S-TAG (outer tag) and a C-TAG (inner tag).";\r
- }\r
- }\r
- description\r
- "The format must be that of a MAC Frame specified in " +\r
- "IEEE Std 802.3-2012 Clause 3.";\r
- reference "[MEF10.3] Section 9.6. [MEF15]. [MEF7.2]. " +\r
- "[MEF7.3] Section 10.1.1. MEF-UNI-EVC-MIB.yang.";\r
- }\r
- typedef uni-mode-type {\r
- type enumeration {\r
- enum "uni" {\r
- description\r
- "UNI Mode.";\r
- }\r
- enum "vuni" {\r
- description\r
- "VUNI Mode.";\r
- }\r
- }\r
- description\r
- "This setting is used to configure a UNI as either a " +\r
- "UNI or a VUNI";\r
- reference "[MEF7.3] Section 10.2.2.";\r
- }\r
- typedef evc-cos-identifier-type {\r
- type enumeration {\r
- enum "evc" {\r
- description\r
- "The EVC ID, depends on the CE-VLAN ID / EVC Mapping " +\r
- "at the UNI, will be used to map Service Frames to " +\r
- "CoS Names/Labels.";\r
- reference "MEF 10.3 Section 10.2.1.1 for " +\r
- "Data Service Frames.";\r
- }\r
- enum "pcp" {\r
- description\r
- "The Priority Code Point(PCP) value within the " +\r
- "CE-VLAN Tag will be used to map Service Frames " +\r
- "to CoS Names/Labels.";\r
- reference "MEF 10.3 Section 10.2.1.2: Priority Code " +\r
- "Point (PCP) Field in the Customer VLAN Tag " +\r
- "in a Tagged Service Frame. ";\r
- }\r
- enum "dscp" {\r
- description\r
- "The Differentiated Services Code Point(DSCP) value " +\r
- "from the IP Packet's IP Header Differentiated " +\r
- "Services Group, associated with the Service Frame, " +\r
- "will be used to map Service Frames to CoS Names/Labels.";\r
- reference "MEF 10.3 Section 10.2.1.3: AKA Internet " +\r
- "Protocol. For a Data Service Frame carrying an " +\r
- "IPv4 or and IPv6 packet.";\r
- }\r
- }\r
- description\r
- "[MEF10.3] Section 10.2.1.";\r
- }\r
- typedef evc-eec-identifier-type {\r
- type enumeration {\r
- enum "pcp" {\r
- description\r
- "The Priority Code Point(PCP) value within the " +\r
- "CE-VLAN Tag will be used to map Service Frames " +\r
- "to CoS Names/Labels.";\r
- reference "MEF 10.3 Section 10.2.1.2: Priority Code " +\r
- "Point (PCP) Field in the Customer VLAN Tag " +\r
- "in a Tagged Service Frame.";\r
- }\r
- enum "dscp" {\r
- description\r
- "The Differentiated Services Code Point(DSCP) value " +\r
- "from the IP Packet's IP Header Differentiated " +\r
- "Services Group, associated with the Service Frame, " +\r
- "will be used to map Service Frames to CoS Names/Labels.";\r
- reference "MEF 10.3 Section 10.2.1.3: AKA Internet " +\r
- "Protocol. For a Data Service Frame carrying " +\r
- "an IPv4 or and IPv6 packet.";\r
- }\r
- }\r
- description\r
- "[MEF10.3] Section 10.2.1.";\r
- }\r
- typedef cos-color-identifier-type {\r
- type enumeration {\r
- enum "evc" {\r
- description\r
- "The EVC ID, depends on the CE-VLAN ID / EVC Mapping " +\r
- "at the UNI, will be used to map Service Frames to " +\r
- "CoS Names/Labels.";\r
- reference "MEF 10.3 Section 10.2.1.1 for Data " +\r
- "Service Frames.";\r
- }\r
- enum "pcp" {\r
- description\r
- "The Priority Code Point(PCP) value within the " +\r
- "CE-VLAN Tag will be used to map Service Frames " +\r
- "to CoS Names/Labels.";\r
- reference "MEF 10.3 Section 10.2.1.2: Priority Code " +\r
- "Point (PCP) Field in the Customer VLAN Tag " +\r
- "in a Tagged Service Frame. ";\r
- }\r
- enum "dei" {\r
- description\r
- "Drop Eligible Indicator(DEI) field of the CE-VLAN Tag.";\r
- }\r
- enum "dscp" {\r
- description\r
- "The Differentiated Services Code Point(DSCP) value " +\r
- "from the IP Packet's IP Header Differentiated " +\r
- "Services Group, associated with the Service " +\r
- "Frame, will be used to map Service Frames to " +\r
- "CoS Names/Labels.";\r
- reference "MEF 10.3 Section 10.2.1.3: AKA Internet " +\r
- "Protocol. For a Data Service Frame carrying " +\r
- "an IPv4 or and IPv6 packet.";\r
- }\r
- }\r
- description\r
- "CoS Color Identification Type.";\r
- reference "[MEF23.1].";\r
- }\r
- typedef cos-color-type {\r
- type enumeration {\r
- enum "green" {\r
- description\r
- "Green.";\r
- }\r
- enum "yellow" {\r
- description\r
- "Yellow.";\r
- }\r
- }\r
- description\r
- "CoS Color.";\r
- reference "[MEF23.1].";\r
- }\r
- typedef bwp-cir-type {\r
- type uint32;\r
- description\r
- "Bandwidth Profile Committed Information Rate in " +\r
- "Kilobits Per Second.";\r
- reference "[MEF10.3] [R143], [R144].";\r
- }\r
- typedef bwp-cbs-type {\r
- type uint32;\r
- description\r
- "Bandwidth Profile Committed Burst Size in Bytes.";\r
- reference "[MEF10.3] [R145].";\r
- }\r
- typedef bwp-eir-type {\r
- type uint32;\r
- description\r
- "Bandwidth Profile Excess Information Rate in " +\r
- "Kilobits Per Second.";\r
- reference "[MEF10.3] [R146], [R147].";\r
- }\r
- typedef bwp-ebs-type {\r
- type uint32 {\r
- range "0 .. 10000000";\r
- }\r
- description\r
- "Excess Burst Size (EBS) in bytes: This parameter limits " +\r
- "the maximum number of bytes available for a burst " +\r
- "of Service Frames sent at the UNI line rate that " +\r
- "will be declared Yellow by the Bandwidth Profile. " +\r
- "If this value is 0, then no limit is assumed.";\r
- reference "[MEF10.3] [R146], [R147].";\r
- }\r
- typedef elmi-polling-counter-type {\r
- type uint16 {\r
- range "1 .. max";\r
- }\r
- description\r
- "ELMI Polling Counter.";\r
- reference "[MEF16] Section 5.6.1.";\r
- }\r
- typedef elmi-status-error-threshold-type {\r
- type uint8 {\r
- range "2 .. 10";\r
- }\r
- description\r
- "The count of consecutive ELMI status polling errors " +\r
- "before raising an error.";\r
- reference "[MEF16] Section 5.6.1.";\r
- }\r
- typedef elmi-polling-timer-type {\r
- type uint8 {\r
- range "5 .. 30";\r
- }\r
- description\r
- "The type used for a timer started after tranmitting " +\r
- "a Status Enquiry. If the timer expires, record " +\r
- "the error if a STATUS message not received and " +\r
- "resend Status Enquiry.";\r
- reference "[MEF16] Section 5.6.1.";\r
- }\r
- typedef elmi-polling-verification-timer-type {\r
- type uint8 {\r
- range "5 .. 30";\r
- }\r
- description\r
- "The type used for a timer started after tranmitting " +\r
- "a Status Message. If a Status Enquiry is recieved before " +\r
- "this timer expires, record the error.";\r
- reference "[MEF16] Section 5.6.1.";\r
- }\r
- typedef bwp-color-mode-type {\r
- type enumeration {\r
- enum "color-blind" {\r
- description\r
- "Color Blind. Do not use CoS Color Configuration for " +\r
- "this Bandwidth Profile.";\r
- }\r
- enum "color-aware" {\r
- description\r
- "Color Aware. Use CoS Color Configuration for this " +\r
- "Bandwidth Profile.";\r
- }\r
- }\r
- description\r
- "This attribute describes the color mode (CM) to be " +\r
- "applied as \"color-blind mode\" or \"color-aware mode\".";\r
- reference "[MEF10.3] Section 10.3, [R151].";\r
- }\r
- typedef bwp-coupling-flag-type {\r
- type enumeration {\r
- enum "yellow-eir-only" {\r
- description\r
- "When CF is set to \"yellow-eir-only\", the volume of " +\r
- "the yellow service frames admitted to the network " +\r
- "cannot exceed EIR.";\r
- }\r
- enum "yellow-eir-plus-cir" {\r
- description\r
- "When CF is set to \"yellow-eir-plus-cir\", the " +\r
- "volume of the yellow service frames admitted to " +\r
- "the network is bounded by CIR + EIR depending on " +\r
- "volume of the offered green Service Frames.";\r
- }\r
- }\r
- description\r
- "The Bandwidth Profile parameter that determines whether " +\r
- "or not overflow tokens not used for Service Frames " +\r
- "declared Green can be used as Yellow tokens.";\r
- reference "[MEF10.3] Section 12.1. [MEF23.1] Section 8.1.";\r
- }\r
- typedef auto-negotiation-type {\r
- type enumeration {\r
- enum "on" {\r
- description\r
- "Phy Auto-negotiation Enabled.";\r
- }\r
- enum "off" {\r
- description\r
- "Phy Auto-negotiation Disabled.";\r
- }\r
- }\r
- description\r
- "Phy Auto-negotiation Enabled/Disabled.";\r
- reference "[MEF20].";\r
- }\r
- typedef service-entity-type {\r
- type enumeration {\r
- enum "evc" {\r
- description\r
- "EVC.";\r
- }\r
- enum "tunnel-1" {\r
- description\r
- "Tunnel Type 1.";\r
- }\r
- enum "tunnel-2" {\r
- description\r
- "Tunnel Type 2.";\r
- }\r
- enum "ovc" {\r
- description\r
- "OVC.";\r
- }\r
- }\r
- description\r
- "MEF Service Entity Type.";\r
- reference "[MEF12.2] Section 7.3, Table 3.";\r
- }\r
- typedef l2cp-handling-type {\r
- type enumeration {\r
- enum "discard" {\r
- description\r
- "Discard - An action taken at a L2CP Decision Point " +\r
- "where a L2CP frame is neither delivered to a protocol " +\r
- "entity, nor delivered to the External Interface " +\r
- "where the L2CP Decision Point is located, nor " +\r
- "propagated to L2CP Decision Points at other " +\r
- "External Interfaces.";\r
- }\r
- enum "pass" {\r
- description\r
- "Pass(Tunnel) - An action taken at a L2CP Decision " +\r
- "Point where a L2CP frame is either delivered to " +\r
- "the External Interface where the L2CP Decision Point " +\r
- "is located, or propagated to the L2CP Decision " +\r
- "Points located at all other External Interfaces " +\r
- "associated by the EVC or OVC.";\r
- }\r
- enum "peer" {\r
- description\r
- "Peer - An action taken at a L2CP Decision Point " +\r
- "where a L2CP frame is delivered to a protocol " +\r
- "entity determined by the Protocol Identifier " +\r
- "in the L2CP Frame.";\r
- }\r
- }\r
- description\r
- "L2CP Service Frame handling option.";\r
- reference "[MEF45] Table 8.";\r
- }\r
- typedef l2cp-address-set-type {\r
- type enumeration {\r
- enum "aware-cta" {\r
- description\r
- "C-VLAN Tag Aware (CTA), for VLAN-based services where" +\r
- " the CE-VLAN ID is used to map a frame to a service.";\r
- }\r
- enum "blind-ctb" {\r
- description\r
- "C-VLAN Tag Blind (CTB), for Port-based services where " +\r
- "the CE-VLAN ID is not used to map a frame to a service.";\r
- }\r
- enum "option2-blind-ctb2" {\r
- description\r
- "C-VLAN Tag Blind Option 2 (CTB-2), for point-to-point " +\r
- "Port-based services that support the EPL Option 2 " +\r
- "L2CP processing.";\r
- }\r
- }\r
- description\r
- "The L2CP Address Set Service Attribute specifies the " +\r
- "subset of the Bridge Reserved Addresses that are " +\r
- "filtered (i.e. L2CP Frames with this destination " +\r
- "address are Peered or Discarded but not Passed) " +\r
- "at a L2CP Decision Point.";\r
- reference "[MEF10.3] Section 9.19. [MEF45] Section 8.1, " +\r
- "[R2] through [R9]. [MEF6.2] Section 8.2.2, [R1]. " +\r
- "[MEF45] Section 8.1.";\r
- }\r
- typedef l2cp-peering-protocol-type {\r
- type enumeration {\r
- enum "ethertype" {\r
- description\r
- "Ethertype.";\r
- }\r
- enum "llc" {\r
- description\r
- "LLC.";\r
- }\r
- enum "other" {\r
- description\r
- "Other: Not using LLC nor Ethertype to specify " +\r
- "the Protocol ID.";\r
- }\r
- }\r
- description\r
- "The Peering Protocol Identifier is one of Ethertype, " +\r
- "LLC, or Other.";\r
- reference "[MEF45] Section 7.";\r
- }\r
- typedef ieee8021p-priority-type {\r
- type uint8 {\r
- range "0 .. 7";\r
- }\r
- description\r
- "IEEE 802.1p VLAN Header Class of Service field. Used for " +\r
- "Priority Code Point(PCP) configurations.";\r
- reference "[MEF10.3] Section 10.2.1.";\r
- }\r
- typedef mef-service-type {\r
- type enumeration {\r
- enum "epl" {\r
- description\r
- "Ethernet Private Line Service (EPL) Point-to-Point " +\r
- "EVC, all to one bundling";\r
- }\r
- enum "evpl" {\r
- description\r
- "Ethernet Virtual Private Line (EVPL) Point-to-Point " +\r
- "EVC, bundling and/or multiplexing";\r
- }\r
- enum "eplan" {\r
- description\r
- "Ethernet Private LAN Service (EP-LAN) " +\r
- "Multipoint-to-Multipoint EVC, all to one bundling";\r
- }\r
- enum "evplan" {\r
- description\r
- "Ethernet Virtual Private LAN Service (EVP-LAN) " +\r
- "Multipoint-to-Multipoint EVC, bundling and/or " +\r
- "multiplexing";\r
- }\r
- enum "eptree" {\r
- description\r
- "Ethernet Private Tree Service (EP-Tree) " +\r
- "Rooted-Multipoint EVC, all to one bundling";\r
- }\r
- enum "evptree" {\r
- description\r
- "Ethernet Virtual Private Tree Service (EVP-Tree) " +\r
- "Rooted-Multipoint EVC, bundling and/or multiplexing";\r
- }\r
- }\r
- description\r
- "This object indicates the specific Ethernet service type.";\r
- }\r
- typedef ext-if-availability-type {\r
- type enumeration {\r
- enum "in-test" {\r
- description\r
- "In-test is equivalent to the IETF RFC 2883 " +\r
- "ifOperStatus 'testing' state.";\r
- }\r
- enum "failed" {\r
- description\r
- "Failed is to be interpretted along with " +\r
- "Operational State.";\r
- }\r
- enum "power-off" {\r
- description\r
- "Power-off indicates the phy is down.";\r
- }\r
- enum "degraded" {\r
- description\r
- "Degraded is to be interpretted along with " +\r
- "Operational State..";\r
- }\r
- enum "not-installed" {\r
- description\r
- "Not-installed is equivalent to the " +\r
- "IETF RFC 2883 ifOperStatus 'notPresent' state.";\r
- }\r
- }\r
- description\r
- "Availability of the Physical Interface. The " +\r
- "availability status type indicates that the Phy " +\r
- "is functioning properly. May be mapped to " +\r
- "RFC 2863, The Interfaces Group MIB " +\r
- "IfOperstatus. Values for availability status " +\r
- "include: inTest, failed, powerOff, degraded, " +\r
- "notInstalled.";\r
- reference "[ITU-T X.731]. [MEF7.3] Section 10.1.1, " +\r
- "[MEF15], [MEF7.2] Appendix II.";\r
- }\r
- typedef virt-cx-availability-type {\r
- type enumeration {\r
- enum "in-test" {\r
- description\r
- "In-test is equivalent to the " +\r
- "IETF RFC 2883 ifOperStatus 'testing' state.";\r
- }\r
- enum "failed" {\r
- description\r
- "Failed is to be interpretted along " +\r
- "with Operational State.";\r
- }\r
- enum "degraded" {\r
- description\r
- "Degraded is to be interpretted along " +\r
- "with Operational State..";\r
- }\r
- enum "not-installed" {\r
- description\r
- "Not-installed is equivalent to the " +\r
- "IETF RFC 2883 ifOperStatus 'notPresent' state.";\r
- }\r
- }\r
- description\r
- "Availability of the Virtual Connection. The " +\r
- "availability status type indicates that the " +\r
- "Virtual Connection is functioning properly. " +\r
- "May be mapped to RFC 2863, The Interfaces Group MIB " +\r
- "IfOperstatus. Values for availability status include: inTest," +\r
- " failed, powerOff, degraded, notInstalled.";\r
- reference "[ITU-T X.731]. [MEF7.3] Section 10.1.1, " +\r
- "[MEF15], [MEF7.2] Appendix II.";\r
- }\r
- typedef svc-endpoint-availability-type {\r
- type enumeration {\r
- enum "in-test" {\r
- description\r
- "In-test is equivalent to the " +\r
- "IETF RFC 2883 ifOperStatus 'testing' state.";\r
- }\r
- enum "failed" {\r
- description\r
- "Failed is to be interpretted along " +\r
- "with Operational State.";\r
- }\r
- enum "degraded" {\r
- description\r
- "Degraded is to be interpretted along " +\r
- "with Operational State..";\r
- }\r
- enum "not-installed" {\r
- description\r
- "Not-installed is equivalent to the " +\r
- "IETF RFC 2883 ifOperStatus 'notPresent' state.";\r
- }\r
- }\r
- description\r
- "Availability of the Service Endpoint. The " +\r
- "availability status type indicates that the " +\r
- "Service Endpoint is functioning properly. " +\r
- "May be mapped to RFC 2863. The Interfaces Group MIB " +\r
- "IfOperstatus. Values for availability status include: " +\r
- "inTest, failed, powerOff, degraded, notInstalled.";\r
- reference "[ITU-T X.731]. [MEF7.3] Section 10.1.1, " +\r
- "[MEF15], [MEF7.2] Appendix II.";\r
- }\r
- typedef ext-if-physical-layer-type {\r
- type enumeration {\r
- enum "10M" {\r
- description\r
- "10M bits-per-second.";\r
- }\r
- enum "100M" {\r
- description\r
- "100M bits-per-second.";\r
- }\r
- enum "1G" {\r
- description\r
- "1G bits-per-second.";\r
- }\r
- enum "10G" {\r
- description\r
- "10G bits-per-second.";\r
- }\r
- enum "40G" {\r
- description\r
- "40G bits-per-second.";\r
- }\r
- enum "100G" {\r
- description\r
- "100G bits-per-second.";\r
- }\r
- }\r
- description\r
- "The maximum theoretical bandwidth for the phy.";\r
- reference "MEF 7.3 Section 10.1.1, MEF 6.2, MEF 10.3, MEF 26.1";\r
- }\r
- typedef device-role {\r
- type enumeration {\r
- enum "ce" {\r
- description "Customer Edge(CE) Access Device";\r
- }\r
- enum "pe" {\r
- description "Aggregation Router";\r
- }\r
- enum "p" {\r
- description "Core Router";\r
- }\r
- }\r
- }\r
-}\r
Code Review / unimgr.git / blobdiff