#!/bin/bash
-# for some reason not all systems have @base installed
-yum install -y -q @base
-
-# also make sure that a few other utilities are definitely installed
-yum install -y -q unzip xz
-
-# install some needed internal networking configurations
-yum install -y dnsmasq puppet
-
-puppet module install lex-dnsmasq
-
# script requires information about subdomain
if [ -z "$1" ]; then
>&2 echo "Please provide the subdomain to Vagrant"
exit 1
+else
+ SUBDOM=$1
fi
-# write the subdomain information into a custom facter fact
-mkdir -p /etc/facter/facts.d/
-echo "subdomain=${1}" > /etc/facter/facts.d/subdomain.txt
-
-# remove current networking configurations
-rm -f /etc/sysconfig/network-scripts/{ifcfg,route}-{eth,docker}*
-
-# final bits
-puppet apply /vagrant/confignetwork.pp
-
-# so that cloud-init doesn't futz with our resolv config after we've
-# configured it
-chattr +i /etc/resolv.conf
-
-# don't let cloud-init do funny things to our routing
-chattr +i /etc/sysconfig/network-scripts/route-eth0
-
-# create a docker bridge that doesn't trample our networks
-# but only if docker is installed
-DOCKER=`rpm -q docker-io`
-if [ "$?" == "0" ]; then
- echo "---> Docker installed, configuring docker bridge"
- # fully overwrite the default, otherwise we end up with the options
- # split over two lines which will fail
- # Default: OPTIONS=--selinux-enabled
- echo 'OPTIONS=--selinux-enabled --bip=10.250.0.254/24' > /etc/sysconfig/docker
-# cat <<EOL > /etc/sysconfig/network-scripts/ifcfg-docker0
-#DEVICE="docker0"
-#TYPE="Bridge"
-#ONBOOT="yes"
-#NM_CONTROLLED="no"
-#IPADDR=10.250.0.254
-#NETMASK=255.255.255.0
-#EOL
-
-# # don't let cloud-init do funny things to our docker bridge
-# chattr +i /etc/sysconfig/network-scripts/ifcfg-docker0
- cat /etc/sysconfig/docker
-fi
-
-
-# setup the needed routing
-cat <<EOL >> /etc/rc.d/post-cloud-init
-#!/bin/bash
-# always force puppet to rerun
-/usr/bin/puppet apply /vagrant/confignetwork.pp
-EOL
+all_systems() {
+ # install specific versions of puppet modules
+ puppet module install puppetlabs-stdlib -v 4.5.1
+ puppet module install puppetlabs-concat -v 1.2.0
+ #puppet module install lex-dnsmasq -v 2.6.1
+ puppet module install saz-dnsmasq -v 1.2.0
-chmod +x /etc/rc.d/post-cloud-init
+ # write the subdomain information into a custom facter fact
+ mkdir -p /etc/facter/facts.d/
+ echo "subdomain=${SUBDOM}" > /etc/facter/facts.d/subdomain.txt
-systemd_init() {
- # create a post-cloud-init.service and enable it
- cat <<EOL > /etc/systemd/system/post-cloud-init.service
-[Unit]
-Description=Post cloud-init script (overwrites some cloud-init config)
-After=cloud-init-local.service
-Requires=cloud-init-local.service
+ # final bits
+ puppet apply /vagrant/confignetwork.pp
-[Service]
-Type=oneshot
-ExecStart=/etc/rc.d/post-cloud-init
-TimeoutSec=0
-#RemainAfterExit=yes
-#SysVStartPriority=99
-
-# Output needs to appear in instance console output
-StandardOutput=journal+console
-
-[Install]
-WantedBy=multi-user.target
-EOL
-
- /usr/bin/systemctl enable post-cloud-init.service
- chattr +i /etc/systemd/system/post-cloud-init.service
}
-sysv_init() {
- # create the SysV init and enable it
- cat <<EOL > /etc/init.d/post-cloud-init
-#!/bin/bash
-
-### BEGIN INIT INFO
-# Provides: post-cloud-init
-# Required-Start: $local_fs $network $named $remote_fs cloud-init-local
-# Should-Start: $time
-# Required-Stop:
-# Should-Stop:
-# Default-Start: 2 3 4 5
-# Default-Stop: 0 1 6
-# Short-Description: Setup dnsmasq for LF Rackspace environment
-# Description: Setup dnsmasq for LF Rackspace environment after
-# cloud-init-local
-
-# Return values acc. to LSB for all commands but status:
-# 0 - success
-# 1 - generic or unspecified error
-# 2 - invalid or excess argument(s)
-# 3 - unimplemented feature (e.g. "reload")
-# 4 - user had insufficient privileges
-# 5 - program is not installed
-# 6 - program is not configured
-# 7 - program is not running
-# 8--199 - reserved (8--99 LSB, 100--149 distrib, 150--199 appl)
-#
-# Note that starting an already running service, stopping
-# or restarting a not-running service as well as the restart
-# with force-reload (in case signaling is not supported) are
-# considered a success.
-
-RETVAL=0
+rh_systems_init() {
+ # remove current networking configurations
+ rm -f /etc/sysconfig/network-scripts/ifcfg-eth*
+}
-prog="post-cloud-init"
+rh_systems_post() {
+ # don't let cloud-init do funny things to our routing
+ chattr +i /etc/sysconfig/network-scripts/route-eth0
-start() {
- echo -n $"Starting $prog: "
- /etc/rc.d/post-cloud-init
- RETVAL=$?
- return $RETVAL
+ # so that the network stack doesn't futz with our resolv config
+ # after we've configured it
+# chattr +i /etc/resolv.conf
}
-stop() {
- echo -n $"Shutting down $prog:"
- # No-op
- RETVAL=7
- return $RETVAL
+ubuntu_systems_post() {
+ # don't let cloud-init destroy our routing
+# chattr +i /etc/network/if-up.d/0000routing
+ echo "---> do nothing for now"
}
-case "$1" in
- start)
- start
- RETVAL=$?
- ;;
- stop)
- stop
- RETVAL=$?
- ;;
- restart|try-restart|condrestart)
- start
- RETVAL=$?
- ;;
- status)
- echo -n $"Checking for service $prog: "
- # Return value is slightly different for the status command:
- # 0 - service up and running
- # 1 - service dead, but /var/run pid file exists
- # 2 - service dead, but /var/lock file exists
- # 3 - service not running (unused)
- # 4 - service status unknown :-(
- # 5--199 reserved (5-99 LSB, 100-149 distro, 150-199 appl.)
- RETVAL=4
- ;;
+# Execute setup that all systems need
+all_systems
+
+echo "---> Checking distribution"
+FACTER_OSFAMILY=`/usr/bin/facter osfamily`
+FACTER_OS=`/usr/bin/facter operatingsystem`
+case "$FACTER_OSFAMILY" in
+ RedHat)
+ rh_systems_init
+ rh_systems_post
+ ;;
+ Debian)
+ case "$FACTER_OS" in
+ Ubuntu)
+ echo "---> Ubuntu found"
+ ubuntu_systems_post
+ ;;
+ *)
+ "---> Nothing to do for ${FACTER_OS}"
+ ;;
+ esac
+ ;;
*)
- echo "Usage: $0 {start|stop|status|try-restart|condrestart|restart|force-reload|reload}"
- RETVAL=3
- ;;
+ echo "---> Unknown OS: ${FACTER_OSFAMILY}"
+ ;;
esac
-exit $RETVAL
-EOL
- chmod +x /etc/init.d/post-cloud-init
-
- /sbin/chkconfig --add post-cloud-init
- /sbin/chkconfig post-cloud-init on
-}
-
-echo "Checking distribution"
-if [ `/usr/bin/facter operatingsystem` = "Fedora" ]; then
- echo "---> Fedora found"
- systemd_init
-else
- if [ `/usr/bin/facter operatingsystemrelease | /bin/cut -d '.' -f1` = "7" ]; then
- echo "---> CentOS 7"
- systemd_init
- else
- echo "---> CentOS 6"
- sysv_init
- fi
-fi
-
# vim: sw=4 ts=4 sts=4 et :
Code Review / releng / builder.git / blobdiff