X-Git-Url: https://git.opendaylight.org/gerrit/gitweb?a=blobdiff_plain;f=csit%2Flibraries%2FGenius.robot;h=6cc208d06ae65a51273ac36cfc80fbf095570d2d;hb=b074651b4d27d286d8ddbae25c323390730a62d9;hp=5e78f0cb432ace4cde6e687fccf5ad1ac091e8a6;hpb=de4a40c80721603dd620178165b07999f5495487;p=integration%2Ftest.git diff --git a/csit/libraries/Genius.robot b/csit/libraries/Genius.robot index 5e78f0cb43..6cc208d06a 100644 --- a/csit/libraries/Genius.robot +++ b/csit/libraries/Genius.robot @@ -27,28 +27,32 @@ ${gateway_ip} 0.0.0.0 ${port_name} br-int-eth1 ${VLAN} 100 ${NO_VLAN} 0 +${DEFAULT_TRANSPORT_ZONE} default-transport-zone +${SET_LOCAL_IP} sudo ovs-vsctl set O . other_config:local_ip= +${REMOVE_LOCAL_IP} sudo ovs-vsctl remove O . other_config local_ip +${odl_stream_check } ${Stream_dict}[${ODL_STREAM}] <= ${Stream_dict}[neon] *** Keywords *** Genius Suite Setup [Documentation] Create Rest Session to http://${ODL_SYSTEM_IP}:${RESTCONFPORT} - Start Suite - Create Session session http://${ODL_SYSTEM_IP}:${RESTCONFPORT} auth=${AUTH} headers=${HEADERS} timeout=5 + Genius.Start Suite + RequestsLibrary.Create Session session http://${ODL_SYSTEM_IP}:${RESTCONFPORT} auth=${AUTH} headers=${HEADERS} timeout=5 Genius Suite Teardown [Documentation] Delete all sessions - Delete All Sessions - Stop Suite + RequestsLibrary.Delete All Sessions + Genius.Stop Suite Start Suite [Documentation] Initial setup for Genius test suites Run_Keyword_If_At_Least_Oxygen Wait Until Keyword Succeeds 60 2 ClusterManagement.Check Status Of Services Is OPERATIONAL @{GENIUS_DIAG_SERVICES} KarafKeywords.Setup_Karaf_Keywords ToolsSystem.Get Tools System Nodes Data - ${karaf_debug_enabled} BuiltIn.Get_Variable_Value ${KARAF_DEBUG} ${False} + ${karaf_debug_enabled} = BuiltIn.Get_Variable_Value ${KARAF_DEBUG} ${False} BuiltIn.run_keyword_if ${karaf_debug_enabled} KarafKeywords.Execute_Controller_Karaf_Command_On_Background log:set DEBUG org.opendaylight.genius Genius.Set Switch Configuration - ${check} = Wait Until Keyword Succeeds 30 10 Check Port Status Is ESTABLISHED ${ODL_OF_PORT_6653} @{TOOLS_SYSTEM_ALL_IPS} - ${check} = Wait Until Keyword Succeeds 30 10 Check Port Status Is ESTABLISHED ${OVSDBPORT} @{TOOLS_SYSTEM_ALL_IPS} + ${check} = BuiltIn.Wait Until Keyword Succeeds 30 10 Check Port Status Is ESTABLISHED ${ODL_OF_PORT_6653} @{TOOLS_SYSTEM_ALL_IPS} + ${check} = BuiltIn.Wait Until Keyword Succeeds 30 10 Check Port Status Is ESTABLISHED ${OVSDBPORT} @{TOOLS_SYSTEM_ALL_IPS} Genius.Build Dpn List @{SWITCH_DATA} = Collections.Combine Lists ${DPN_ID_LIST} ${TOOLS_SYSTEM_ALL_IPS} BuiltIn.Set Suite Variable @{SWITCH_DATA} @@ -58,25 +62,26 @@ Start Suite Stop Suite [Documentation] stops all connections and deletes all the bridges available on OVS - : FOR ${tool_system_index} IN RANGE ${NUM_TOOLS_SYSTEM} - \ Switch Connection @{TOOLS_SYSTEM_ALL_CONN_IDS}[${tool_system_index}] - \ Execute Command sudo ovs-vsctl del-br ${Bridge} - \ Execute Command sudo ovs-vsctl del-manager - \ Write exit - \ Close Connection + FOR ${tool_system_index} IN RANGE ${NUM_TOOLS_SYSTEM} + SSHLibrary.Switch Connection ${TOOLS_SYSTEM_ALL_CONN_IDS}[${tool_system_index}] + SSHLibrary.Execute Command sudo ovs-vsctl del-br ${Bridge} + SSHLibrary.Execute Command sudo ovs-vsctl del-manager + SSHLibrary.Write exit + SSHLibrary.Close Connection + END Check Port Status Is ESTABLISHED [Arguments] ${port} @{tools_ips} [Documentation] This keyword will check whether ports are established or not on OVS - : FOR ${tools_ip} IN @{tools_ips} - \ ${check_establishment} = Utils.Run Command On Remote System And Log ${tools_ip} netstat -anp | grep ${port} - \ BuiltIn.Should Contain ${check_establishment} ESTABLISHED + FOR ${tools_ip} IN @{tools_ips} + ${check_establishment} = Utils.Run Command On Remote System And Log ${tools_ip} netstat -anp | grep ${port} + BuiltIn.Should Contain ${check_establishment} ESTABLISHED + END [Return] ${check_establishment} Create Vteps [Arguments] ${vlan_id} ${gateway_ip} [Documentation] This keyword creates VTEPs between OVS - ${body} OperatingSystem.Get File ${genius_config_dir}/Itm_creation_no_vlan.json ${body} = Genius.Set Json ${vlan_id} ${gateway_ip} ${SUBNET} @{TOOLS_SYSTEM_ALL_IPS} ${resp} = RequestsLibrary.Put Request session ${CONFIG_API}/itm:transport-zones/transport-zone/TZA data=${body} BuiltIn.Should Contain ${ALLOWED_STATUS_CODES} ${resp.status_code} @@ -84,35 +89,41 @@ Create Vteps Set Json [Arguments] ${vlan} ${gateway_ip} ${subnet} @{tools_ips} [Documentation] Sets Json with the values passed for it. - ${body} OperatingSystem.Get File ${genius_config_dir}/Itm_creation_no_vlan.json - ${body} Replace String ${body} 1.1.1.1 ${subnet} - : FOR ${tool_system_index} IN RANGE ${NUM_TOOLS_SYSTEM} - \ ${body} Replace String ${body} "dpn-id": 10${tool_system_index} "dpn-id": ${DPN_ID_LIST[${tool_system_index}]} - \ ${body} Replace String ${body} "ip-address": "${tool_system_index+2}.${tool_system_index+2}.${tool_system_index+2}.${tool_system_index+2}" "ip-address": "@{tools_ips}[${tool_system_index}]" - ${body} Replace String ${body} "vlan-id": 0 "vlan-id": ${vlan} - ${body} Replace String ${body} "gateway-ip": "0.0.0.0" "gateway-ip": "${gateway_ip}" - Log ${body} + ${body} = BuiltIn.Run Keyword If ${odl_stream_check } OperatingSystem.Get File ${genius_config_dir}/Itm_creation_no_vlan_below_sodium.json + ... ELSE OperatingSystem.Get File ${genius_config_dir}/Itm_creation_no_vlan_sodium_and_above.json + ${body} = BuiltIn.Run Keyword If ${odl_stream_check } String.Replace String ${body} 1.1.1.1 ${subnet} + ... ELSE BuiltIn.Set Variable ${body} + ${body} = BuiltIn.Run Keyword If ${odl_stream_check } String.Replace String ${body} "vlan-id": 0 "vlan-id": ${vlan} + ... ELSE BuiltIn.Set Variable ${body} + ${body} = BuiltIn.Run Keyword If ${odl_stream_check } String.Replace String ${body} "gateway-ip": "0.0.0.0" "gateway-ip": "${gateway_ip}" + ... ELSE BuiltIn.Set Variable ${body} + FOR ${tool_system_index} IN RANGE ${NUM_TOOLS_SYSTEM} + ${body} String.Replace String ${body} "dpn-id": 10${tool_system_index} "dpn-id": ${DPN_ID_LIST[${tool_system_index}]} + ${body} String.Replace String ${body} "ip-address": "${tool_system_index+2}.${tool_system_index+2}.${tool_system_index+2}.${tool_system_index+2}" "ip-address": "${tools_ips}[${tool_system_index}]" + END + BuiltIn.Log ${body} [Return] ${body} # returns complete json that has been updated Build Dpn List [Documentation] This keyword builds the list of DPN ids after configuring OVS bridges on each of the TOOLS_SYSTEM_IPs. - @{DPN_ID_LIST} BuiltIn.Create List - : FOR ${tools_ip} IN @{TOOLS_SYSTEM_ALL_IPS} - \ ${output} Utils.Run Command On Remote System And Log ${tools_ip} sudo ovs-ofctl show -O Openflow13 ${Bridge} | head -1 | awk -F "dpid:" '{ print $2 }' - \ ${dpn_id} Utils.Run Command On Remote System And Log ${tools_ip} echo \$\(\(16\#${output}\)\) - \ Collections.Append To List ${DPN_ID_LIST} ${dpn_id} + @{DPN_ID_LIST} = BuiltIn.Create List + FOR ${tools_ip} IN @{TOOLS_SYSTEM_ALL_IPS} + ${output} Utils.Run Command On Remote System And Log ${tools_ip} sudo ovs-ofctl show -O Openflow13 ${Bridge} | head -1 | awk -F "dpid:" '{ print $2 }' + ${dpn_id} Utils.Run Command On Remote System And Log ${tools_ip} echo \$\(\(16\#${output}\)\) + Collections.Append To List ${DPN_ID_LIST} ${dpn_id} + END BuiltIn.Set Suite Variable @{DPN_ID_LIST} BFD Suite Teardown [Documentation] Run at end of BFD suite - Delete All Vteps - Stop Suite + Genius.Delete All Vteps + Genius.Stop Suite Delete All Vteps [Documentation] This will delete vtep. ${resp} = RequestsLibrary.Delete Request session ${CONFIG_API}/itm:transport-zones/ BuiltIn.Should Be Equal As Strings ${resp.status_code} 200 - BuiltIn.Wait Until Keyword Succeeds 30 5 Verify Tunnel Delete on DS tun + BuiltIn.Wait Until Keyword Succeeds 30 5 Genius.Verify Tunnel Delete on DS tun Genius Test Setup [Documentation] Genius test case setup @@ -120,76 +131,82 @@ Genius Test Setup Genius Test Teardown [Arguments] ${data_models} ${test_name}=${SUITE_NAME}.${TEST_NAME} ${fail}=${FAIL_ON_EXCEPTIONS} - : FOR ${tool_system_index} IN RANGE ${NUM_TOOLS_SYSTEM} - \ OVSDB.Get DumpFlows And Ovsconfig @{TOOLS_SYSTEM_ALL_CONN_IDS}[${tool_system_index}] ${Bridge} + FOR ${tool_system_index} IN RANGE ${NUM_TOOLS_SYSTEM} + OVSDB.Get DumpFlows And Ovsconfig ${TOOLS_SYSTEM_ALL_CONN_IDS}[${tool_system_index}] ${Bridge} + END BuiltIn.Run Keyword And Ignore Error DataModels.Get Model Dump ${ODL_SYSTEM_IP} ${data_models} KarafKeywords.Fail If Exceptions Found During Test ${test_name} fail=${fail} ODLTools.Get All test_name=${test_name} Genius Suite Debugs [Arguments] ${data_models} - Genius Test Teardown ${data_models} test_name=${SUITE_NAME} fail=False + Genius.Genius Test Teardown ${data_models} test_name=${SUITE_NAME} fail=False ITM Direct Tunnels Start Suite [Documentation] start suite for itm scalability ClusterManagement.ClusterManagement_Setup ClusterManagement.Stop_Members_From_List_Or_All - : FOR ${controller_index} IN RANGE ${NUM_ODL_SYSTEM} - \ Run Command On Remote System And Log ${ODL_SYSTEM_${controller_index+1}_IP} sed -i -- 's/false/true/g' ${GENIUS_IFM_CONFIG_FLAG} + FOR ${controller_index} IN RANGE ${NUM_ODL_SYSTEM} + Utils.Run Command On Remote System And Log ${ODL_SYSTEM_${controller_index+1}_IP} sed -i -- 's/false/true/g' ${GENIUS_IFM_CONFIG_FLAG} + END ClusterManagement.Start_Members_From_List_Or_All - Genius Suite Setup + Genius.Genius Suite Setup ITM Direct Tunnels Stop Suite [Documentation] Stop suite for ITM Direct Tunnels. - : FOR ${controller_index} IN RANGE ${NUM_ODL_SYSTEM} - \ Run Command On Remote System And Log ${ODL_SYSTEM_${controller_index+1}_IP} sed -i -- 's/true/false/g' ${GENIUS_IFM_CONFIG_FLAG} - Genius Suite Teardown + FOR ${controller_index} IN RANGE ${NUM_ODL_SYSTEM} + Utils.Run Command On Remote System And Log ${ODL_SYSTEM_${controller_index+1}_IP} sed -i -- 's/true/false/g' ${GENIUS_IFM_CONFIG_FLAG} + END + Genius.Genius Suite Teardown Ovs Interface Verification [Documentation] Checks whether the created Interface is seen on OVS or not. - : FOR ${tools_ip} IN @{TOOLS_SYSTEM_ALL_IPS} - \ Ovs Verification For Each Dpn ${tools_ip} ${TOOLS_SYSTEM_ALL_IPS} + FOR ${tools_ip} IN @{TOOLS_SYSTEM_ALL_IPS} + Genius.Ovs Verification For Each Dpn ${tools_ip} ${TOOLS_SYSTEM_ALL_IPS} + END Get ITM - [Arguments] ${itm_created[0]} ${subnet} ${vlan} + [Arguments] ${itm_created[0]} ${switch_data}=${SWITCH_DATA} [Documentation] It returns the created ITM Transport zone with the passed values during the creation is done. - @{Itm-no-vlan} Create List ${itm_created[0]} ${subnet} ${vlan} - @{Itm-no-vlan} Collections.Combine Lists ${Itm-no-vlan} ${SWITCH_DATA} - Check For Elements At URI ${TUNNEL_TRANSPORTZONE}/transport-zone/${itm_created[0]} ${Itm-no-vlan} + Collections.Append To List ${switch_data} ${itm_created[0]} + Utils.Check For Elements At URI ${TUNNEL_TRANSPORTZONE}/transport-zone/${itm_created[0]} ${switch_data} Check Tunnel Delete On OVS [Arguments] ${tunnel_list} [Documentation] Verifies the Tunnel is deleted from OVS. - : FOR ${tools_ip} IN @{TOOLS_SYSTEM_ALL_IPS} - \ ${output} = Utils.Run Command On Remote System ${tools_ip} sudo ovs-vsctl show - \ Genius.Verify Deleted Tunnels on OVS ${tunnel_list} ${output} + FOR ${tools_ip} IN @{TOOLS_SYSTEM_ALL_IPS} + ${output} = Utils.Run Command On Remote System ${tools_ip} sudo ovs-vsctl show + Genius.Verify Deleted Tunnels on OVS ${tunnel_list} ${output} + END Check Table0 Entry In a Dpn [Arguments] ${tools_ip} ${bridgename} ${port_numbers} [Documentation] Checks the Table 0 entry in the OVS when flows are dumped. ${check} = Utils.Run Command On Remote System And Log ${tools_ip} sudo ovs-ofctl -OOpenFlow13 dump-flows ${bridgename} ${num_ports} = BuiltIn.Get Length ${port_numbers} - : FOR ${port_index} IN RANGE ${num_ports} - \ BuiltIn.Should Contain ${check} in_port=@{port_numbers}[${port_index}] + FOR ${port_index} IN RANGE ${num_ports} + BuiltIn.Should Contain ${check} in_port=${port_numbers}[${port_index}] + END Verify Tunnel Status As Up [Arguments] ${no_of_switches}=${NUM_TOOLS_SYSTEM} [Documentation] Verify that the number of tunnels are UP - ${no_of_tunnels} = Issue Command On Karaf Console ${TEP_SHOW_STATE} + ${no_of_tunnels} = KarafKeywords.Issue Command On Karaf Console ${TEP_SHOW_STATE} ${lines_of_state_up} = String.Get Lines Containing String ${no_of_tunnels} ${STATE_UP} ${actual_tunnel_count} = String.Get Line Count ${lines_of_state_up} ${expected_tunnel_count} = BuiltIn.Evaluate ${no_of_switches}*(${no_of_switches}-1) - Should Be Equal As Strings ${actual_tunnel_count} ${expected_tunnel_count} + BuiltIn.Should Be Equal As Strings ${actual_tunnel_count} ${expected_tunnel_count} Verify Tunnel Status [Arguments] ${tunnel_status} ${tunnel_names} [Documentation] Verifies if all tunnels in the input, has the expected status(UP/DOWN/UNKNOWN) ${tep_result} = KarafKeywords.Issue Command On Karaf Console ${TEP_SHOW_STATE} ${number_of_tunnels} = BuiltIn.Get Length ${tunnel_names} - : FOR ${each_tunnel} IN RANGE ${number_of_tunnels} - \ ${tunnel} = Collections.Get From List ${tunnel_names} ${each_tunnel} - \ ${tep_output} = String.Get Lines Containing String ${tep_result} ${tunnel} - \ BuiltIn.Should Contain ${tep_output} ${tunnel_status} + FOR ${each_tunnel} IN RANGE ${number_of_tunnels} + ${tunnel} = Collections.Get From List ${tunnel_names} ${each_tunnel} + ${tep_output} = String.Get Lines Containing String ${tep_result} ${tunnel} + BuiltIn.Should Contain ${tep_output} ${tunnel_status} + END Get Tunnels On OVS [Arguments] ${connection_id} @@ -199,9 +216,10 @@ Get Tunnels On OVS @{tunnel_names} = BuiltIn.Create List ${tunnels} = String.Get Lines Matching Regexp ${ovs_result} Interface "tun.*" True @{tunnels_list} = String.Split To Lines ${tunnels} - : FOR ${tun} IN @{tunnels_list} - \ ${tun_list} Get Regexp Matches ${tun} tun.*\\w - \ Collections.Append To List ${tunnel_names} @{tun_list} + FOR ${tun} IN @{tunnels_list} + ${tun_list} Get Regexp Matches ${tun} tun.*\\w + Collections.Append To List ${tunnel_names} @{tun_list} + END ${items_in_list} = BuiltIn.Get Length ${tunnel_names} [Return] @{tunnel_names} @@ -212,13 +230,13 @@ Get Tunnel ${resp} = BuiltIn.Run Keyword If '${config_api_type}' == '${EMPTY}' RequestsLibrary.Get Request session ${CONFIG_API}/itm-state:tunnel-list/internal-tunnel/${src}/${dst}/${type}/ ... ELSE RequestsLibrary.Get Request session ${CONFIG_API}/itm-state:dpn-teps-state/dpns-teps/${src}/remote-dpns/${dst}/ BuiltIn.Should Be Equal As Strings ${resp.status_code} ${RESP_CODE} - BuiltIn.Log ${resp.content} - ${respjson} = RequestsLibrary.To Json ${resp.content} pretty_print=True - ${json} = Utils.Json Parse From String ${resp.content} - BuiltIn.Should Contain ${resp.content} ${dst} - BuiltIn.Run Keyword If '${config_api_type}' == '${EMPTY}' BuiltIn.Should Contain ${resp.content} ${src} + BuiltIn.Log ${resp.text} + ${respjson} = RequestsLibrary.To Json ${resp.text} pretty_print=True + ${json} = Utils.Json Parse From String ${resp.text} + BuiltIn.Should Contain ${resp.text} ${dst} + BuiltIn.Run Keyword If '${config_api_type}' == '${EMPTY}' BuiltIn.Should Contain ${resp.text} ${src} ${tunnel_interface_name} = BuiltIn.Run Keyword If "tunnel-interface-names" in "${json}" Genius.Get Tunnel Interface Name ${json["internal-tunnel"][0]} tunnel-interface-names - ${tunnel_name_output} ${tunnel_name} = BuiltIn.Run Keyword Unless '${config_api_type}' == '${EMPTY}' BuiltIn.Should Match Regexp ${resp.content} "tunnel-name":"(tun[\\w\\d]+)" + ${tunnel_name_output} ${tunnel_name} = BuiltIn.Run Keyword Unless '${config_api_type}' == '${EMPTY}' BuiltIn.Should Match Regexp ${resp.text} "tunnel-name":"(tun[\\w\\d]+)" ${tunnel} = BuiltIn.Set Variable If '${config_api_type}' == '${EMPTY}' ${tunnel_interface_name} ${tunnel_name} [Return] ${tunnel} @@ -239,31 +257,32 @@ SRM Start Suite Genius Suite Setup Genius.Create Vteps ${NO_VLAN} ${gateway_ip} BuiltIn.Wait Until Keyword Succeeds 60s 5s Genius.Verify Tunnel Status As Up - Genius Suite Debugs ${data_models} + Genius.Genius Suite Debugs ${data_models} SRM Stop Suite [Documentation] Stop suite for service recovery. - Delete All Vteps - Genius Suite Debugs ${data_models} - Genius Suite Teardown + Genius.Delete All Vteps + Genius.Genius Suite Debugs ${data_models} + Genius.Genius Suite Teardown Verify Tunnel Monitoring Status [Arguments] ${tunnel_monitor_status} - ${output}= Issue Command On Karaf Console ${TEP_SHOW} - Should Contain ${output} ${tunnel_monitor_status} + ${output}= KarafKeywords.Issue Command On Karaf Console ${TEP_SHOW} + BuiltIn.Should Contain ${output} ${tunnel_monitor_status} Set Switch Configuration [Documentation] This keyword will set manager,controller,tap port,bridge on each OVS - : FOR ${tool_system_index} IN RANGE ${NUM_TOOLS_SYSTEM} - \ SSHLibrary.Switch Connection @{TOOLS_SYSTEM_ALL_CONN_IDS}[${tool_system_index}] - \ SSHLibrary.Login With Public Key ${TOOLS_SYSTEM_USER} ${USER_HOME}/.ssh/${SSH_KEY} any - \ SSHLibrary.Execute Command sudo ovs-vsctl add-br ${Bridge} - \ SSHLibrary.Execute Command sudo ovs-vsctl set bridge ${Bridge} protocols=OpenFlow13 - \ SSHLibrary.Execute Command sudo ovs-vsctl set-controller ${Bridge} tcp:${ODL_SYSTEM_IP}:${ODL_OF_PORT_6653} - \ SSHLibrary.Execute Command sudo ifconfig ${Bridge} up - \ SSHLibrary.Execute Command sudo ovs-vsctl add-port ${Bridge} tap${tool_system_index}ed70586-6c -- set Interface tap${tool_system_index}ed70586-6c type=tap - \ SSHLibrary.Execute Command sudo ovs-vsctl set-manager tcp:${ODL_SYSTEM_IP}:${OVSDBPORT} - \ SSHLibrary.Execute Command sudo ovs-vsctl show + FOR ${tool_system_index} IN RANGE ${NUM_TOOLS_SYSTEM} + SSHLibrary.Switch Connection ${TOOLS_SYSTEM_ALL_CONN_IDS}[${tool_system_index}] + SSHLibrary.Login With Public Key ${TOOLS_SYSTEM_USER} ${USER_HOME}/.ssh/${SSH_KEY} any + SSHLibrary.Execute Command sudo ovs-vsctl add-br ${Bridge} + SSHLibrary.Execute Command sudo ovs-vsctl set bridge ${Bridge} protocols=OpenFlow13 + SSHLibrary.Execute Command sudo ovs-vsctl set-controller ${Bridge} tcp:${ODL_SYSTEM_IP}:${ODL_OF_PORT_6653} + SSHLibrary.Execute Command sudo ifconfig ${Bridge} up + SSHLibrary.Execute Command sudo ovs-vsctl add-port ${Bridge} tap${tool_system_index}ed70586-6c -- set Interface tap${tool_system_index}ed70586-6c type=tap + SSHLibrary.Execute Command sudo ovs-vsctl set-manager tcp:${ODL_SYSTEM_IP}:${OVSDBPORT} + SSHLibrary.Execute Command sudo ovs-vsctl show + END Ovs Verification For Each Dpn [Arguments] ${tools_system_ip} ${tools_ips} @@ -273,9 +292,10 @@ Ovs Verification For Each Dpn Collections.Remove Values From List ${updated_tools_ip_list} ${tools_system_ip} BuiltIn.Log Many @{updated_tools_ip_list} ${num_tool_ips} BuiltIn.Get Length ${updated_tools_ip_list} - : FOR ${num} IN RANGE ${num_tool_ips} - \ ${tools_ip} = Collections.Get From List ${updated_tools_ip_list} ${num} - \ BuiltIn.Should Contain ${ovs_output} ${tools_ip} + FOR ${num} IN RANGE ${num_tool_ips} + ${tools_ip} = Collections.Get From List ${updated_tools_ip_list} ${num} + BuiltIn.Should Contain ${ovs_output} ${tools_ip} + END Get Tunnels List [Documentation] The keyword fetches the list of operational tunnels from ODL @@ -286,39 +306,41 @@ Get Tunnels List Verify Table0 Entry After fetching Port Number [Documentation] This keyword will get the port number and checks the table0 entry for each dpn - : FOR ${tools_ip} IN @{TOOLS_SYSTEM_ALL_IPS} - \ ${check} = Utils.Run Command On Remote System And Log ${tools_ip} sudo ovs-ofctl -O OpenFlow13 show ${Bridge} - \ ${port_numbers} = String.Get Regexp Matches ${check} (\\d+).tun.* 1 - \ Genius.Check Table0 Entry In a Dpn ${tools_ip} ${Bridge} ${port_numbers} + FOR ${tools_ip} IN @{TOOLS_SYSTEM_ALL_IPS} + ${check} = Utils.Run Command On Remote System And Log ${tools_ip} sudo ovs-ofctl -O OpenFlow13 show ${Bridge} + ${port_numbers} = String.Get Regexp Matches ${check} (\\d+).tun.* 1 + Genius.Check Table0 Entry In a Dpn ${tools_ip} ${Bridge} ${port_numbers} + END Verify Deleted Tunnels On OVS [Arguments] ${tunnel_list} ${resp_data} [Documentation] This will verify whether tunnel is deleted. BuiltIn.Log ${resp_data} - : FOR ${tunnel} IN @{tunnel_list} - \ BuiltIn.Should Not Contain ${resp_data} ${tunnel} + FOR ${tunnel} IN @{tunnel_list} + BuiltIn.Should Not Contain ${resp_data} ${tunnel} + END Verify Response Code Of Dpn End Point Config API + [Arguments] ${dpn_list}=${DPN_ID_LIST} [Documentation] This keyword will verify response code from itm-state: dpn endpoints config api for each dpn - : FOR ${dpn} IN @{DPN_ID_LIST} - \ BuiltIn.Wait Until Keyword Succeeds 40 5 Utils.Get Data From URI session ${CONFIG_API}/itm-state:dpn-endpoints/DPN-TEPs-info/${dpn}/ + FOR ${dpn} IN @{dpn_list} + BuiltIn.Wait Until Keyword Succeeds 40 5 Utils.Get Data From URI session ${CONFIG_API}/itm-state:dpn-endpoints/DPN-TEPs-info/${dpn}/ + END Get Tunnel Between DPNs - [Arguments] ${tunnel_type} ${config_api_type} ${dpn_id_index} @{DPN_ID_UPDATED_LIST} + [Arguments] ${tunnel_type} ${config_api_type} ${src_dpn_id} @{dst_dpn_ids} [Documentation] This keyword will Get All the Tunnels available on DPN's - : FOR ${tool_system_index} IN RANGE ${NUM_TOOLS_SYSTEM} -1 - \ ${tunnel} BuiltIn.Wait Until Keyword Succeeds 30 10 Genius.Get Tunnel ${DPN_ID_LIST[${dpn_id_index}]} - \ ... ${DPN_ID_UPDATED_LIST[${tool_system_index}]} ${tunnel_type} ${config_api_type} - ${dpn_id_index} = BuiltIn.Evaluate ${dpn_id_index}+1 - [Return] ${dpn_id_index} + FOR ${dst_dpn_id} IN @{dst_dpn_ids} + ${tunnel} = BuiltIn.Wait Until Keyword Succeeds 30 10 Genius.Get Tunnel ${src_dpn_id} + ... ${dst_dpn_id} ${tunnel_type} ${config_api_type} + END Update Dpn id List And Get Tunnels - [Arguments] ${tunnel_type} ${config_api_type}=${EMPTY} + [Arguments] ${tunnel_type} ${config_api_type}=${EMPTY} ${dpn_ids}=${DPN_ID_LIST} [Documentation] Update the exisisting dpn id list to form different combination of dpn ids such that tunnel formation between all dpns is verified. - ${dpn_id_index_1} = BuiltIn.Set Variable 0 - : FOR ${tool_system_index} IN RANGE ${NUM_TOOLS_SYSTEM} - \ ${dpn_id_index_2} = BuiltIn.Set Variable ${dpn_id_index_1} - \ @{DPN_ID_UPDATED_LIST} = BuiltIn.Create List @{DPN_ID_LIST} - \ Collections.Remove Values From List ${DPN_ID_UPDATED_LIST} ${DPN_ID_LIST[${tool_system_index}]} - \ BuiltIn.Log Many ${DPN_ID_UPDATED_LIST} - \ ${dpn_id_index_1} = Get Tunnel Between DPNs ${tunnel_type} ${config_api_type} ${dpn_id_index_2} @{DPN_ID_UPDATED_LIST} + FOR ${dpn_id} IN @{dpn_ids} + @{dpn_ids_updated} = BuiltIn.Create List @{dpn_ids} + Collections.Remove Values From List ${dpn_ids_updated} ${dpn_id} + BuiltIn.Log Many ${dpn_ids_updated} + Genius.Get Tunnel Between DPNs ${tunnel_type} ${config_api_type} ${dpn_id} @{dpn_ids_updated} + END