X-Git-Url: https://git.opendaylight.org/gerrit/gitweb?a=blobdiff_plain;f=csit%2Flibraries%2FUtils.robot;h=75171684800f30bea2292198759529521bb8bd47;hb=94651ca9711d8eb316721775561e815830bc6c7e;hp=a18f2bec19ffec846ab62cb82c41a3364906b1d9;hpb=88fbda8f7e813b5cbdce81d52eeca1d918e11647;p=integration%2Ftest.git diff --git a/csit/libraries/Utils.robot b/csit/libraries/Utils.robot index a18f2bec19..7517168480 100644 --- a/csit/libraries/Utils.robot +++ b/csit/libraries/Utils.robot @@ -1,21 +1,24 @@ *** Settings *** Documentation General Utils library. This library has broad scope, it can be used by any robot system tests. Library SSHLibrary +Library HttpLibrary.HTTP Library String Library DateTime Library Process Library Collections Library RequestsLibrary -Library ./UtilLibrary.py -Resource KarafKeywords.robot -Variables ../variables/Variables.py +Library OperatingSystem +Library ${CURDIR}/UtilLibrary.py +Resource ${CURDIR}/SSHKeywords.robot +Resource ${CURDIR}/TemplatedRequests.robot +Resource ${CURDIR}/../variables/Variables.robot *** Variables *** # TODO: Introduce ${tree_size} and use instead of 1 in the next line. ${start} sudo mn --controller=remote,ip=${ODL_SYSTEM_IP} --topo tree,1 --switch ovsk,protocols=OpenFlow13 *** Keywords *** -Start Suite +Start Mininet [Arguments] ${system}=${TOOLS_SYSTEM_IP} ${user}=${TOOLS_SYSTEM_USER} ${password}=${TOOLS_SYSTEM_PASSWORD} ${prompt}=${DEFAULT_LINUX_PROMPT} ${timeout}=30s [Documentation] Basic setup/cleanup work that can be done safely before any system ... is run. @@ -23,34 +26,12 @@ Start Suite Clean Mininet System ${mininet_conn_id}= Open Connection ${system} prompt=${prompt} timeout=${timeout} Set Suite Variable ${mininet_conn_id} - Flexible Mininet Login user=${user} password=${password} + SSHKeywords.Flexible Mininet Login user=${user} password=${password} Execute Command sudo ovs-vsctl set-manager ptcp:6644 Write ${start} Read Until mininet> -Start Mininet - [Arguments] ${system}=${TOOLS_SYSTEM_IP} ${cmd}=${start} ${custom}= ${user}=${TOOLS_SYSTEM_USER} ${password}=${TOOLS_SYSTEM_PASSWORD} ${prompt}=${DEFAULT_LINUX_PROMPT} - ... ${prompt_timeout}=30s - [Documentation] Basic setup to start mininet with custom topology - Log Start the test on the base edition - Clean Mininet System - ${mininet_conn_id}= Open Connection ${system} prompt=${prompt} timeout=${prompt_timeout} - Set Suite Variable ${mininet_conn_id} - Flexible Mininet Login user=${user} password=${password} - Put File ${custom} - Write ${cmd} - Read Until mininet> - [Return] ${mininet_conn_id} - Stop Mininet - [Arguments] ${mininet_conn_id} ${prompt}=${DEFAULT_LINUX_PROMPT} - [Documentation] Basic setup to stop/clean mininet - Switch Connection ${mininet_conn_id} - SSHLibrary.Write exit - Read Until ${prompt} - Close Connection - -Stop Suite [Arguments] ${prompt}=${DEFAULT_LINUX_PROMPT} [Documentation] Cleanup/Shutdown work that should be done at the completion of all ... tests @@ -61,8 +42,8 @@ Stop Suite Read Until ${prompt} Close Connection -Report_Failure_Due_To_Bug - [Arguments] ${number} +Report Failure Due To Bug + [Arguments] ${number} ${include_bug_in_tags}=True [Documentation] Report that a test failed due to a known Bugzilla bug whose ... number is provided as an argument. ... Not FAILED (incl. SKIPPED) test are not reported. @@ -72,10 +53,14 @@ Report_Failure_Due_To_Bug ... into the Robot log file. ${test_skipped}= BuiltIn.Evaluate len(re.findall('SKIPPED', """${TEST_MESSAGE}""")) > 0 modules=re BuiltIn.Return From Keyword If ('${TEST_STATUS}' != 'FAIL') or ${test_skipped} + Comment Jira tickets are {PROJECT}-{NUMBER} while Bugzilla tickets are {NUMBER} + ${match} BuiltIn.Run Keyword And Return Status Should Contain ${number} - + ${bug_url}= BuiltIn.Set Variable If ${match} https://jira.opendaylight.org/browse/${number} https://bugs.opendaylight.org/show_bug.cgi?id=${number} + ${msg}= BuiltIn.Set_Variable This test fails due to ${bug_url} ${newline}= BuiltIn.Evaluate chr(10) - ${msg}= BuiltIn.Set_Variable This test fails due to https://bugs.opendaylight.org/show_bug.cgi?id=${number} BuiltIn.Set Test Message ${msg}${newline}${newline}${TEST_MESSAGE} BuiltIn.Log ${msg} + BuiltIn.Run Keyword If "${include_bug_in_tags}"=="True" Set Tags ${bug_url} Report_Failure_And_Point_To_Linked_Bugs [Documentation] Report that a test failed and point to linked Bugzilla bug(s). @@ -93,68 +78,61 @@ Report_Failure_And_Point_To_Linked_Bugs ${reference}= String.Replace_String_Using_Regexp ${SUITE_NAME}_${TEST_NAME} [ /\.-] _ ${reference}= String.Convert_To_Lowercase ${reference} ${msg}= BuiltIn.Set_Variable ... click for list of related bugs or create a new one if needed (with the${newline}"${reference}"${newline}reference somewhere inside) - ${bugs}= BuiltIn.Set_Variable "https://bugs.opendaylight.org/buglist.cgi?f1=longdesc&o1=substring&v1=${reference}&order=bug_status" + ${bugs}= BuiltIn.Set_Variable "https://bugs.opendaylight.org/buglist.cgi?f1=cf_external_ref&o1=substring&v1=${reference}&order=bug_status" BuiltIn.Set Test Message ${msg}${newline}${bugs}${newline}${newline}${TEST_MESSAGE} BuiltIn.Log ${msg}${newline}${bugs} -Ensure All Nodes Are In Response - [Arguments] ${URI} ${node_list} - [Documentation] A GET is made to the supplied ${URI} and every item in the ${node_list} - ... is verified to exist in the repsonse. This keyword currently implies that it's node - ... specific but any list of strings can be given in ${node_list}. Refactoring of this - ... to make it more generic should be done. (see keyword "Check For Elements At URI") - : FOR ${node} IN @{node_list} - \ ${resp} RequestsLibrary.Get Request session ${URI} - \ Should Be Equal As Strings ${resp.status_code} 200 - \ Should Contain ${resp.content} ${node} - Check Nodes Stats - [Arguments] ${node} + [Arguments] ${node} ${session}=session [Documentation] A GET on the /node/${node} API is made and specific flow stat ... strings are checked for existence. - ${resp} RequestsLibrary.Get Request session ${OPERATIONAL_NODES_API}/node/${node} + ${resp} RequestsLibrary.Get Request ${session} ${OPERATIONAL_NODES_API}/node/${node} Should Be Equal As Strings ${resp.status_code} 200 Should Contain ${resp.content} flow-capable-node-connector-statistics Should Contain ${resp.content} flow-table-statistics -Check That Port Count Is Ok - [Arguments] ${node} ${count} - [Documentation] A GET on the /port API is made and the specified port ${count} is - ... verified. A more generic Keyword "Check For Specific Number Of Elements At URI" - ... also does this work and further consolidation should be done. - ${resp} RequestsLibrary.Get Request session ${REST_CONTEXT}/${CONTAINER}/port - Log ${resp.content} - Should Be Equal As Strings ${resp.status_code} 200 - Should Contain X Times ${resp.content} ${node} ${count} - Check For Specific Number Of Elements At URI - [Arguments] ${uri} ${element} ${expected_count} + [Arguments] ${uri} ${element} ${expected_count} ${session}=session [Documentation] A GET is made to the specified ${URI} and the specific count of a ... given element is done (as supplied by ${element} and ${expected_count}) - ${resp} RequestsLibrary.Get Request session ${uri} + ${resp} RequestsLibrary.Get Request ${session} ${uri} Log ${resp.content} Should Be Equal As Strings ${resp.status_code} 200 Should Contain X Times ${resp.content} ${element} ${expected_count} +Log Content + [Arguments] ${resp_content} + ${resp_json} = BuiltIn.Run Keyword If '''${resp_content}''' != '${EMPTY}' RequestsLibrary.To Json ${resp_content} pretty_print=True + ... ELSE BuiltIn.Set Variable ${EMPTY} + BuiltIn.Log ${resp_json} + [Return] ${resp_json} + Check For Elements At URI - [Arguments] ${uri} ${elements} + [Arguments] ${uri} ${elements} ${session}=session ${pretty_print_json}=False [Documentation] A GET is made at the supplied ${URI} and every item in the list of ... ${elements} is verified to exist in the response - ${resp} RequestsLibrary.Get Request session ${uri} - Log ${resp.content} + ${resp} RequestsLibrary.Get Request ${session} ${uri} + BuiltIn.Run Keyword If "${pretty_print_json}" == "True" Log Content ${resp.content} + ... ELSE BuiltIn.Log ${resp.content} Should Be Equal As Strings ${resp.status_code} 200 - : FOR ${i} IN @{elements} - \ Should Contain ${resp.content} ${i} + FOR ${i} IN @{elements} + Should Contain ${resp.content} ${i} + END Check For Elements Not At URI - [Arguments] ${uri} ${elements} - [Documentation] A GET is made at the supplied ${URI} and every item in the list of - ... ${elements} is verified to NOT exist in the response - ${resp} RequestsLibrary.Get Request session ${uri} - Log ${resp.content} + [Arguments] ${uri} ${elements} ${session}=session ${pretty_print_json}=False ${check_for_null}=False + [Documentation] A GET is made at the supplied ${uri} and every item in the list of + ... ${elements} is verified to NOT exist in the response. If ${check_for_null} is True + ... return of 404 is treated as empty list. From Neon onwards, an empty list is always + ... returned as null, giving 404 on rest call. + ${resp} RequestsLibrary.Get Request ${session} ${uri} + BuiltIn.Run Keyword If "${pretty_print_json}" == "True" Log Content ${resp.content} + ... ELSE BuiltIn.Log ${resp.content} + BuiltIn.Run Keyword If "${check_for_null}" == "True" Builtin.Return From Keyword If ${resp.status_code} == 404 Should Be Equal As Strings ${resp.status_code} 200 - : FOR ${i} IN @{elements} - \ Should Not Contain ${resp.content} ${i} + FOR ${i} IN @{elements} + Should Not Contain ${resp.content} ${i} + END Clean Mininet System [Arguments] ${system}=${TOOLS_SYSTEM_IP} @@ -166,8 +144,9 @@ Clean Up Ovs [Documentation] Cleans up the OVS instance and remove any existing common known bridges. ${output}= Run Command On Mininet ${system} sudo ovs-vsctl list-br Log ${output} - : FOR ${i} IN ${output} - \ Run Command On Mininet ${system} sudo ovs-vsctl --if-exists del-br ${i} + FOR ${i} IN ${output} + Run Command On Mininet ${system} sudo ovs-vsctl --if-exists del-br ${i} + END Run Command On Mininet ${system} sudo ovs-vsctl del-manager Extract Value From Content @@ -209,48 +188,37 @@ Strip Quotes ${string_to_return}= Replace String ${string_to_strip} " \ count=-1 [Return] ${string_to_return} -Flexible SSH Login - [Arguments] ${user} ${password}=${EMPTY} ${delay}=0.5s - [Documentation] On active SSH session: if given non-empty password, do Login, else do Login With Public Key. - ${pwd_length} = BuiltIn.Get Length ${password} - # ${pwd_length} is guaranteed to be an integer, so we are safe to evaluate it as Python expression. - BuiltIn.Run Keyword And Return If ${pwd_length} > 0 SSHLibrary.Login ${user} ${password} delay=${delay} - BuiltIn.Run Keyword And Return SSHLibrary.Login With Public Key ${user} ${USER_HOME}/.ssh/${SSH_KEY} ${KEYFILE_PASS} delay=${delay} - -Flexible Mininet Login - [Arguments] ${user}=${TOOLS_SYSTEM_USER} ${password}=${TOOLS_SYSTEM_PASSWORD} ${delay}=0.5s - [Documentation] Call Flexible SSH Login, but with default values suitable for Mininet machine. - BuiltIn.Run Keyword And Return Flexible SSH Login user=${user} password=${password} delay=${delay} - -Flexible Controller Login - [Arguments] ${user}=${ODL_SYSTEM_USER} ${password}=${ODL_SYSTEM_PASSWORD} ${delay}=0.5s - [Documentation] Call Flexible SSH Login, but with default values suitable for Controller machine. - BuiltIn.Run Keyword And Return Flexible SSH Login user=${user} password=${password} delay=${delay} - Run Command On Remote System [Arguments] ${system} ${cmd} ${user}=${DEFAULT_USER} ${password}=${EMPTY} ${prompt}=${DEFAULT_LINUX_PROMPT} ${prompt_timeout}=${DEFAULT_TIMEOUT} + ... ${return_stdout}=True ${return_stderr}=False [Documentation] Reduces the common work of running a command on a remote system to a single higher level - ... robot keyword, taking care to log in with a public key and. The command given is written - ... and the output returned. No test conditions are checked. - Log Attempting to execute ${cmd} on ${system} by ${user} with ${keyfile_pass} and ${prompt} + ... robot keyword, taking care to log in with a public key and. The command given is written and the return value + ... depends on the passed argument values of return_stdout (default: True) and return_stderr (default: False). + ... At least one should be True, or the keyword will exit and FAIL. If both are True, the resulting return value + ... will be a two element list containing both. Otherwise the resulting return value is a string. + ... No test conditions are checked. + Run Keyword If "${return_stdout}"!="True" and "${return_stderr}"!="True" Fail At least one of {return_stdout} or {return_stderr} args should be set to True + ${current_ssh_connection}= SSHLibrary.Get Connection + BuiltIn.Log Attempting to execute command "${cmd}" on remote system "${system}" by user "${user}" with keyfile pass "${keyfile_pass}" and prompt "${prompt}" and password "${password}" ${conn_id}= SSHLibrary.Open Connection ${system} prompt=${prompt} timeout=${prompt_timeout} - Flexible SSH Login ${user} ${password} + SSHKeywords.Flexible SSH Login ${user} ${password} ${stdout} ${stderr} SSHLibrary.Execute Command ${cmd} return_stderr=True SSHLibrary.Close Connection Log ${stderr} - [Return] ${stdout} + Run Keyword If "${return_stdout}"!="True" Return From Keyword ${stderr} + Run Keyword If "${return_stderr}"!="True" Return From Keyword ${stdout} + [Teardown] SSHKeywords.Restore_Current_SSH_Connection_From_Index ${current_ssh_connection.index} + [Return] ${stdout} ${stderr} -Write_Bare_Ctrl_C - [Documentation] Construct ctrl+c character and SSH-write it (without endline) to the current SSH connection. - ... Do not read anything yet. - ${ctrl_c}= BuiltIn.Evaluate chr(int(3)) - SSHLibrary.Write_Bare ${ctrl_c} - -Write Bare Ctrl D - [Documentation] Construct ctrl+d character and SSH-write it (without endline) to the current SSH connection. - ... Do not read anything yet. - ${ctrl_d}= BuiltIn.Evaluate chr(int(4)) - SSHLibrary.Write Bare ${ctrl_d} +Run Command On Remote System And Log + [Arguments] ${system} ${cmd} ${user}=${DEFAULT_USER} ${password}=${EMPTY} ${prompt}=${DEFAULT_LINUX_PROMPT} ${prompt_timeout}=${DEFAULT_TIMEOUT} + [Documentation] Reduces the common work of running a command on a remote system to a single higher level + ... robot keyword, taking care to log in with a public key and. The command given is written + ... and the output returned. No test conditions are checked. + ${output} = Run Command On Remote System ${system} ${cmd} ${user} ${password} ${prompt} + ... ${prompt_timeout} + Log ${output} + [Return] ${output} Run Command On Mininet [Arguments] ${system}=${TOOLS_SYSTEM_IP} ${cmd}=echo ${user}=${TOOLS_SYSTEM_USER} ${password}=${TOOLS_SYSTEM_PASSWORD} ${prompt}=${TOOLS_SYSTEM_PROMPT} @@ -262,15 +230,36 @@ Run Command On Controller [Documentation] Call Run Comand On Remote System, but with default values suitable for Controller machine. BuiltIn.Run Keyword And Return Run Command On Remote System ${system} ${cmd} ${user} ${password} prompt=${prompt} +Run Command On Existing Connection + [Arguments] ${conn_id}=${EMPTY} ${cmd}=echo ${return_stdout}=True ${return_stderr}=False + [Documentation] Switch to and run command on an already existing SSH connection and switch back + Run Keyword If "${return_stdout}"!="True" and "${return_stderr}"!="True" Fail At least one of {return_stdout} or {return_stderr} args should be set to True + ${current_ssh_connection}= SSHLibrary.Get Connection + BuiltIn.Log Attempting to execute command "${cmd}" on existing connection "${conn_id} + SSHLibrary.Switch Connection ${conn_id} + ${stdout} ${stderr} SSHLibrary.Execute Command ${cmd} return_stderr=True + Log ${stderr} + Run Keyword If "${return_stdout}"!="True" Return From Keyword ${stderr} + Run Keyword If "${return_stderr}"!="True" Return From Keyword ${stdout} + [Teardown] SSHKeywords.Restore_Current_SSH_Connection_From_Index ${current_ssh_connection.index} + [Return] ${stdout} ${stderr} + Verify File Exists On Remote System [Arguments] ${system} ${file} ${user}=${TOOLS_SYSTEM_USER} ${password}=${TOOLS_SYSTEM_PASSWORD} ${prompt}=${DEFAULT_LINUX_PROMPT} ${prompt_timeout}=5s [Documentation] Will create connection with public key and will PASS if the given ${file} exists, ... otherwise will FAIL ${conn_id}= Open Connection ${system} prompt=${prompt} timeout=${prompt_timeout} - Flexible SSH Login ${user} ${password} + SSHKeywords.Flexible SSH Login ${user} ${password} SSHLibrary.File Should Exist ${file} Close Connection +Check Karaf Log File Does Not Have Messages + [Arguments] ${ip} ${message} ${user}=${ODL_SYSTEM_USER} ${password}=${ODL_SYSTEM_PASSWORD} ${prompt}=${ODL_SYSTEM_PROMPT} ${log_file}=${WORKSPACE}/${BUNDLEFOLDER}/data/log/karaf.log + [Documentation] Fails if the provided ${message} is found in the karaf.log file. Uses grep to search. The + ... karaf.log file can be overridden with ${log_file} to be any file on the given system @ ${ip} + ${output}= Run Command On Controller ${ip} grep -c '${message}' ${log_file} user=${user} password=${password} prompt=${prompt} + Should Be Equal As Strings ${output} 0 + Verify Controller Is Not Dead [Arguments] ${controller_ip}=${ODL_SYSTEM_IP} [Documentation] Will execute any tests to verify the controller is not dead. Some checks are @@ -313,49 +302,73 @@ Concatenate the String [Return] ${output} Post Elements To URI - [Arguments] ${rest_uri} ${data} ${headers}=${headers} + [Arguments] ${rest_uri} ${data} ${headers}=${headers} ${session}=session [Documentation] Perform a POST rest operation, using the URL and data provided - ${resp} = RequestsLibrary.Post Request session ${rest_uri} data=${data} headers=${headers} - Should Be Equal As Strings ${resp.status_code} 200 + ${resp} = RequestsLibrary.Post Request ${session} ${rest_uri} data=${data} headers=${headers} + Log ${resp.content} + Should Contain ${ALLOWED_STATUS_CODES} ${resp.status_code} Remove All Elements At URI - [Arguments] ${uri} - ${resp} RequestsLibrary.Delete Request session ${uri} - Should Be Equal As Strings ${resp.status_code} 200 + [Arguments] ${uri} ${session}=session + ${resp} RequestsLibrary.Delete Request ${session} ${uri} + Should Contain ${ALLOWED_STATUS_CODES} ${resp.status_code} Remove All Elements At URI And Verify - [Arguments] ${uri} - ${resp} RequestsLibrary.Delete Request session ${uri} - Should Be Equal As Strings ${resp.status_code} 200 - ${resp} RequestsLibrary.Get Request session ${uri} + [Arguments] ${uri} ${session}=session + ${resp} RequestsLibrary.Delete Request ${session} ${uri} + Should Contain ${ALLOWED_STATUS_CODES} ${resp.status_code} + ${resp} RequestsLibrary.Get Request ${session} ${uri} Should Be Equal As Strings ${resp.status_code} 404 +Remove All Elements If Exist + [Arguments] ${uri} ${session}=session + [Documentation] Delete all elements from an URI if the configuration was not empty + ${resp} RequestsLibrary.Get Request ${session} ${uri} + Run Keyword If '${resp.status_code}'!='404' Remove All Elements At URI ${uri} ${session} + Add Elements To URI From File - [Arguments] ${dest_uri} ${data_file} ${headers}=${headers} + [Arguments] ${dest_uri} ${data_file} ${headers}=${headers} ${session}=session + [Documentation] Put data from a file to a URI ${body} OperatingSystem.Get File ${data_file} - ${resp} RequestsLibrary.Put Request session ${dest_uri} data=${body} headers=${headers} - Should Be Equal As Strings ${resp.status_code} 200 + ${resp} RequestsLibrary.Put Request ${session} ${dest_uri} data=${body} headers=${headers} + Should Contain ${ALLOWED_STATUS_CODES} ${resp.status_code} Add Elements To URI From File And Verify - [Arguments] ${dest_uri} ${data_file} ${headers}=${headers} + [Arguments] ${dest_uri} ${data_file} ${headers}=${headers} ${session}=session + [Documentation] Put data from a file to a URI and verify the HTTP response ${body} OperatingSystem.Get File ${data_file} - ${resp} RequestsLibrary.Put Request session ${dest_uri} data=${body} headers=${headers} - Should Be Equal As Strings ${resp.status_code} 200 - ${resp} RequestsLibrary.Get Request session ${dest_uri} - Should Not Be Equal ${resp.status_code} 404 + Add Elements to URI And Verify ${dest_uri} ${body} ${headers} ${session} Add Elements To URI And Verify - [Arguments] ${dest_uri} ${data_file} ${headers}=${headers} - ${resp} RequestsLibrary.Put Request session ${dest_uri} ${data_file} headers=${headers} - Should Be Equal As Strings ${resp.status_code} 200 - ${resp} RequestsLibrary.Get Request session ${dest_uri} + [Arguments] ${dest_uri} ${data} ${headers}=${headers} ${session}=session + [Documentation] Put data to a URI and verify the HTTP response + ${resp} RequestsLibrary.Put Request ${session} ${dest_uri} ${data} headers=${headers} + Should Contain ${ALLOWED_STATUS_CODES} ${resp.status_code} + ${resp} RequestsLibrary.Get Request ${session} ${dest_uri} Should Not Be Equal ${resp.status_code} 404 +Add Elements To URI From File And Check Validation Error + [Arguments] ${dest_uri} ${data_file} ${headers}=${headers} ${session}=session + [Documentation] Shorthand for PUTting data from file and expecting status code 400. + BuiltIn.Comment TODO: Does this have any benefits, considering TemplatedRequests can also do this in one line? + ${body} OperatingSystem.Get File ${data_file} + ${resp} RequestsLibrary.Put Request ${session} ${dest_uri} data=${body} headers=${headers} + Should Contain ${DATA_VALIDATION_ERROR} ${resp.status_code} + +Add Elements To URI From File And Check Server Error + [Arguments] ${dest_uri} ${data_file} ${headers}=${headers} ${session}=session + [Documentation] Shorthand for PUTting data from file and expecting status code 500. + ... Consider opening a Bug against ODL, as in most test cases, 400 is the http code to expect. + BuiltIn.Comment TODO: Does this have any benefits, considering TemplatedRequests can also do this in one line? + ${body} OperatingSystem.Get File ${data_file} + ${resp} RequestsLibrary.Put Request ${session} ${dest_uri} data=${body} headers=${headers} + Should Contain ${INTERNAL_SERVER_ERROR} ${resp.status_code} + Post Elements To URI From File - [Arguments] ${dest_uri} ${data_file} ${headers}=${headers} + [Arguments] ${dest_uri} ${data_file} ${headers}=${headers} ${session}=session ${body} OperatingSystem.Get File ${data_file} - ${resp} RequestsLibrary.Post Request session ${dest_uri} data=${body} headers=${headers} - Should Be Equal As Strings ${resp.status_code} 200 + ${resp} RequestsLibrary.Post Request ${session} ${dest_uri} data=${body} headers=${headers} + Should Contain ${ALLOWED_STATUS_CODES} ${resp.status_code} Run Process With Logging And Status Check [Arguments] @{proc_args} @@ -377,6 +390,14 @@ Get Data From URI Builtin.Log ${response.text} Builtin.Fail The request failed with code ${response.status_code} +Get URI And Verify + [Arguments] ${uri} ${session}=session ${headers}=${NONE} + [Documentation] Issue a GET request and verify a successfull HTTP return. + ... Issues a GET request for ${uri} in ${session} using headers from ${headers}. + ${response} = RequestsLibrary.Get Request ${session} ${uri} ${headers} + Builtin.Log ${response.status_code} + Should Contain ${ALLOWED_STATUS_CODES} ${response.status_code} + No Content From URI [Arguments] ${session} ${uri} ${headers}=${NONE} [Documentation] Issue a GET request and return on error 404 (No content) or will fail and log the content. @@ -393,21 +414,177 @@ Get Index From List Of Dictionaries [Documentation] Extract index for the dictionary in a list that contains a key-value pair. Returns -1 if key-value is not found. ${length}= Get Length ${dictionary_list} ${index}= Set Variable -1 - : FOR ${i} IN RANGE ${length} - \ ${dictionary}= Get From List ${dictionary_list} ${i} - \ Run Keyword If '&{dictionary}[${key}]' == '${value}' Set Test Variable ${index} ${i} + FOR ${i} IN RANGE ${length} + ${dictionary}= Get From List ${dictionary_list} ${i} + Run Keyword If """&{dictionary}[${key}]""" == """${value}""" Set Test Variable ${index} ${i} + END [Return] ${index} Check Item Occurrence [Arguments] ${string} ${dictionary_item_occurrence} [Documentation] Check string for occurrences of items expressed in a list of dictionaries {item=occurrences}. 0 occurences means item is not present. - : FOR ${item} IN @{dictionary_item_occurrence} - \ Should Contain X Times ${string} ${item} &{dictionary_item_occurrence}[${item}] + FOR ${item} IN @{dictionary_item_occurrence} + Should Contain X Times ${string} ${item} &{dictionary_item_occurrence}[${item}] + END Post Log Check - [Arguments] ${uri} ${body} ${status_code}=200 + [Arguments] ${uri} ${body} ${session}=session ${status_codes}=200 [Documentation] Post body to ${uri}, log response content, and check status - ${resp}= RequestsLibrary.Post Request session ${uri} ${body} + ${resp}= RequestsLibrary.Post Request ${session} ${uri} ${body} Log ${resp.content} - Should Be Equal As Strings ${resp.status_code} ${status_code} + TemplatedRequests.Check Status Code ${resp} ${status_codes} [Return] ${resp} + +Get Log File Name + [Arguments] ${testtool} ${testcase}=${EMPTY} + [Documentation] Get the name of the suite sanitized to be usable as a part of filename. + ... These names are used to constructs names of the log files produced + ... by the testing tools so two suites using a tool wont overwrite the + ... log files if they happen to run in one job. + ${name}= BuiltIn.Evaluate """${SUITE_NAME}""".replace(" ","-").replace("/","-").replace(".","-") + ${suffix}= BuiltIn.Set_Variable_If '${testcase}' != '' --${testcase} ${EMPTY} + ${date} = DateTime.Get Current Date + ${timestamp} = DateTime.Convert Date ${date} epoch + [Return] ${testtool}--${name}${suffix}.${timestamp}.log + +Set_User_Configurable_Variable_Default + [Arguments] ${name} ${value} + [Documentation] Set a default value for an user configurable variable. + ... This keyword is needed if your default value is calculated using + ... a complex expression which needs BuiltIn.Evaluate or even more + ... complex keywords. It sets the variable ${name} (the name of the + ... variable MUST be specified WITHOUT the ${} syntactic sugar due + ... to limitations of Robot Framework) to ${value} but only if the + ... variable ${name} was not set previously. This keyword is intended + ... for user configurable variables which are supposed to be set only + ... with pybot -v; calling this keyword on a variable that was already + ... set by another keyword will silently turn the call into a NOP and + ... thus is a bug in the suite or resource trying to call this + ... keyword. + # TODO: Figure out how to make the ${value} evaluation "lazy" (meaning + # evaluating it only when the user did not set anything and thus the + # default is needed). This might be needed to avoid potentially costly + # keyword invocations when they are not needed. Currently no need for + # this was identified, thus leaving it here as a TODO. Based on + # comments the best approach would be to create another keyword that + # expects a ScalarClosure in the place of ${value} and calls the + # closure to get the value but only if the value is needed). + # The best idea how to implement this "laziness" would be to have the + # used to define another keyword that will be responsible for getting + # the default value and then passing the name of this getter keyword + # to this keyword. Then this keyword would call the getter (to obtain + # the expensive default value) only if it discovers that this value + # is really needed (because the variable is not set yet). + # TODO: Is the above TODO really necessary? Right now we don't have any + # examples of "expensive default values" where to obtain the default + # value is so expensive on resources (e.g. need to SSH somewhere to + # check something) that we would want to skip the calculation if the + # variable for which it is needed has a value already provided by the + # user using "pybot -v" or something. One example would be + # JAVA_HOME if it would be designed as user-configurable variable + # (currently it is not; users can specify "use jdk7" or "use jdk8" + # but not "use the jdk over there"; and there actually is no JAVA_HOME + # present in the resource, rather the Java invocation command uses the + # Java invocation with a full path). The default value of JAVA_HOME + # has to be obtained by issuing commands on the SSH connection where + # the resulting Java invocation command will be used (to check + # multiple candidate paths until one that fits is found) and we could + # skip all this checking if a JAVA_HOME was supplied by the user using + # "pybot -v". + ${value}= BuiltIn.Get_Variable_Value \${${name}} ${value} + BuiltIn.Set_Suite_Variable \${${name}} ${value} + +Convert_To_Minutes + [Arguments] ${time} + [Documentation] Convert a Robot time string to an integer expressing the time in minutes, rounded up + ... This is a wrapper around DateTime.Convert_Time which does not + ... provide this functionality directly nor is even able to produce + ... an integer directly. It is needed for RestPerfClient which + ... cannot accept floats for its --timeout parameter and interprets + ... the value supplied in this parameter in minutes. + ${seconds}= DateTime.Convert_Time ${time} result_format=number + ${minutes}= BuiltIn.Evaluate int(math.ceil(${seconds}/60.0)) modules=math + [Return] ${minutes} + +Write Commands Until Expected Prompt + [Arguments] ${cmd} ${prompt} ${timeout}=${DEFAULT_TIMEOUT} + [Documentation] quick wrapper for Write and Read Until Prompt Keywords to make test cases more readable + BuiltIn.Log cmd: ${cmd} + SSHLibrary.Set Client Configuration timeout=${timeout} + SSHLibrary.Read + SSHLibrary.Write ${cmd} + ${output}= SSHLibrary.Read Until ${prompt} + [Return] ${output} + +Write Commands Until Expected Regexp + [Arguments] ${cmd} ${regexp} ${timeout}=${DEFAULT_TIMEOUT} + [Documentation] quick wrapper for Write and Read Until Prompt Keywords to make test cases more readable + BuiltIn.Log cmd: ${cmd} + SSHLibrary.Set Client Configuration timeout=${timeout} + SSHLibrary.Read + SSHLibrary.Write ${cmd} + ${output}= SSHLibrary.Read Until Regexp ${regexp} + [Return] ${output} + +Install Package On Ubuntu System + [Arguments] ${package_name} ${system}=${TOOLS_SYSTEM_IP} ${user}=${TOOLS_SYSTEM_USER} ${password}=${TOOLS_SYSTEM_PASSWORD} ${prompt}=${DEFAULT_LINUX_PROMPT} ${prompt_timeout}=30s + [Documentation] Keyword to install packages for testing to Ubuntu Mininet VM + Log Keyword to install package to Mininet Ubuntu VM + Open Connection ${system} prompt=${prompt} timeout=${prompt_timeout} + SSHKeywords.Flexible Mininet Login user=${user} password=${password} + Write sudo apt-get install -y ${package_name} + Read Until ${prompt} + +Json Parse From String + [Arguments] ${plain_string_with_json} + [Documentation] Parse given plain string into json (dictionary) + ${json_data} Evaluate json.loads('''${plain_string_with_json}''') json + [Return] ${json_data} + +Json Parse From File + [Arguments] ${json_file} + [Documentation] Parse given file content into json (dictionary) + ${json_plain_string} OperatingSystem.Get file ${json_file} + ${json_data} Json Parse From String ${json_plain_string} + [Return] ${json_data} + +Modify Iptables On Remote System + [Arguments] ${remote_system_ip} ${iptables_rule} ${user}=${ODL_SYSTEM_USER} ${password}=${ODL_SYSTEM_PASSWORD} ${prompt}=${ODL_SYSTEM_PROMPT} + [Documentation] Wrapper keyword to run iptables with any given ${iptables_rule} string on the remote system given + ... by ${remote_system_ip}. The iptables listing will be output before and after the command is run + ${list_iptables_command} = BuiltIn.Set Variable sudo /sbin/iptables -L -n + ${output} = Utils.Run Command On Remote System ${remote_system_ip} ${list_iptables_command} ${user} ${password} prompt=${prompt} + BuiltIn.Log ${output} + Utils.Run Command On Remote System ${remote_system_ip} sudo /sbin/iptables ${iptables_rule} ${user} ${password} prompt=${prompt} + ${output} = Utils.Run Command On Remote System ${remote_system_ip} ${list_iptables_command} ${user} ${password} prompt=${prompt} + BuiltIn.Log ${output} + +Get_Sysstat_Statistics + [Arguments] ${ip_address}=${ODL_SYSTEM_IP} + [Documentation] Store current connection index, open new connection to ip_address. Run command to get sysstat results from script, + ... which is running on all children nodes. Returns cpu, network, memory usage statistics from the node for each 10 minutes + ... that node was running. Used for debug purposes. Returns whole output of sysstat. + ${current_connection}= SSHLibrary.Get_Connection + SSHKeywords.Open_Connection_To_ODL_System ${ip_address} + SSHLibrary.Write sar -A -f /var/log/sa/sa* + ${output} SSHLibrary.Read_Until_Prompt + BuiltIn.Log ${output} + SSHLibrary.Close_Connection + [Teardown] SSHKeywords.Restore_Current_SSH_Connection_From_Index ${current_connection.index} + [Return] ${output} + +Check Diagstatus + [Arguments] ${ip_address}=${ODL_SYSTEM_IP} ${check_status}=True ${expected_status}=${200} + [Documentation] GET http://${ip_address}:${RESTCONFPORT}/diagstatus and return the response. ${check_status} + ... and ${expected_status_code} can be used to ignore the status code, or validate any status code value. + ... By default, this keyword will pass if the status code returned is 200, and fail otherwise. + RequestsLibrary.Create Session diagstatus_session http://${ip_address}:${RESTCONFPORT} + ${resp} RequestsLibrary.Get Request diagstatus_session /diagstatus + Run Keyword If "${check_status}" == "True" BuiltIn.Should Be Equal As Strings ${resp.status_code} ${expected_status} + [Return] ${resp} + +Download File On Openstack Node + [Arguments] ${conn_id} ${save_file_name} ${url} + [Documentation] Download a file from web to the node. the input will be a session ID with established SSH connection. + SSHLibrary.Switch Connection ${conn_id} + Utils.Write Commands Until Expected Prompt wget -O /tmp/${save_file_name} ${url} ${DEFAULT_LINUX_PROMPT_STRICT}