X-Git-Url: https://git.opendaylight.org/gerrit/gitweb?a=blobdiff_plain;f=docs%2Fuser-guide.rst;h=aba848f4052419585fe7ed74a60b9442a259b63d;hb=de9c823434160ba713e598018cd1cfc09d8cbb08;hp=93fd3c22298529575fd67bef4c9ec08c812ab391;hpb=801a825dd97884a07e8f109eb02b7276f2282e47;p=transportpce.git

diff --git a/docs/user-guide.rst b/docs/user-guide.rst
index 93fd3c222..aba848f40 100644
--- a/docs/user-guide.rst
+++ b/docs/user-guide.rst
@@ -17,11 +17,11 @@ request coming from a higher layer controller and/or an orchestrator.
 This capability may rely on the controller only or it may be delegated to
 distributed (standardized) protocols.
 
-It provides alarm/fault and performance
-monitoring, but this function might be externalized to improve the scalability.
-A Graphical User Interface could be developed in a later step, but is not
-considered as a priority since automated control does not imply user
-interactions at the transport controller level.
+It provides basic alarm/fault and performance monitoring,
+but this function might be externalized to improve the scalability.
+A Graphical User Interface has been developped separately and is not proposed
+here since automated control does not imply user interactions at the transport
+controller level.
 
 TransportPCE modular architecture is described on the next diagram. Each main
 function such as Topology management, Path Calculation Engine (PCE), Service
@@ -41,18 +41,18 @@ TransportPCE User-Facing Features
    -  This feature contains all other features/bundles of TransportPCE project.
       If you install it, it provides all functions that the TransportPCE project
       can support.
-
--  **odl-transportpce-api**
-
-   -  This feature contains all Transportpce project specific models defined in "Service-path".
+      It exposes all Transportpce project specific models defined in "Service-path".
       These models complement OpenROADM models describing South and Northbound APIs, and define the
       data structure used to interconnect the generic blocks/functions described on the previous
       diagram.
 
--  **odl-transportpce-ordmodels**
+-  **feature odl-transportpce-tapi**
 
-   -  This feature contains all OpenROADM models : Common, Device, Network and Service models.
+   -  This feature provides transportPCE a limited support of TAPI version 2.1.2 Northbound interface.
 
+-  **feature odl-transportpce-inventory**
+
+   -  This feature provides transportPCE an external connector to a MariaDB inventory currently limited to openROADM 1.2.1 devices.
 
 How To Start
 ------------
@@ -61,8 +61,8 @@ Preparing for Installation
 ~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 1. Devices must support the standard OpenROADM Models more precisely versions
-   1.2.1 and 2.1. Experimental support is provided for 2.2 and 2.2.1 devices
-   (portmapping only at this moment).
+   1.2.1 and 2.1. Limited support is provided for 2.2 and 2.2.1 devices.
+   If WDM is supported on them, the OTN support is considererd experimental at that date.
 
 2. Devices must support configuration through NETCONF protocol/API.
 
@@ -75,4 +75,12 @@ Run OpenDaylight and install TransportPCE Service *odl-transportpce* as below::
 
    feature:install odl-transportpce
 
+if you need TAPI limited support, then run::
+
+   feature:install odl-transportpce-tapi
+
+if you need the inventory external connector support limited to 1.2.1 OpenROADM devices, then run::
+
+   feature:install odl-transportpce-inventory
+
 For a more detailed overview of the TransportPCE, see the :ref:`transportpce-dev-guide`.