X-Git-Url: https://git.opendaylight.org/gerrit/gitweb?a=blobdiff_plain;f=jjb%2Fintegration%2Finclude-raw-integration-deploy-controller-run-test.sh;h=3e7ed10308255ef59668574aa9fe03c273441316;hb=4aaa45a1cafdf3191f28a3885a7010fa966a6bda;hp=fdf0f8a8d791c9585cc4f47c8bd51c6617339e85;hpb=d445106923840aca19b64d20dde4ed146123d463;p=releng%2Fbuilder.git

diff --git a/jjb/integration/include-raw-integration-deploy-controller-run-test.sh b/jjb/integration/include-raw-integration-deploy-controller-run-test.sh
index fdf0f8a8d..3e7ed1030 100644
--- a/jjb/integration/include-raw-integration-deploy-controller-run-test.sh
+++ b/jjb/integration/include-raw-integration-deploy-controller-run-test.sh
@@ -2,10 +2,18 @@
 # Activate robotframework virtualenv
 # ${ROBOT_VENV} comes from the include-raw-integration-install-robotframework.sh
 # script.
+# shellcheck source=${ROBOT_VENV}/bin/activate disable=SC1091
 source ${ROBOT_VENV}/bin/activate
 
 CONTROLLERMEM="2048m"
 
+if [ "${ENABLE_HAPROXY_FOR_NEUTRON}" == "yes" ]; then
+    echo "Configure cluster"
+    AKKACONF=/tmp/${BUNDLEFOLDER}/configuration/initial/akka.conf
+    MODULESCONF=/tmp/${BUNDLEFOLDER}/configuration/initial/modules.conf
+    MODULESHARDSCONF=/tmp/${BUNDLEFOLDER}/configuration/initial/module-shards.conf
+fi
+
 if [ ${CONTROLLERSCOPE} == 'all' ]; then
     ACTUALFEATURES="odl-integration-compatible-with-all,${CONTROLLERFEATURES}"
     CONTROLLERMEM="3072m"
@@ -14,80 +22,123 @@ else
     ACTUALFEATURES="${CONTROLLERFEATURES}"
     COOLDOWN_PERIOD="60"
 fi
+
 # Some versions of jenkins job builder result in feature list containing spaces
 # and ending in newline. Remove all that.
 ACTUALFEATURES=`echo "${ACTUALFEATURES}" | tr -d '\n \r'`
 
-if [ -f ${WORKSPACE}/test/csit/scriptplans/${TESTPLAN} ]; then
+if [ -f "${WORKSPACE}/test/csit/scriptplans/${TESTPLAN}" ]; then
     echo "scriptplan exists!!!"
     echo "Changing the scriptplan path..."
     cat ${WORKSPACE}/test/csit/scriptplans/${TESTPLAN} | sed "s:integration:${WORKSPACE}:" > scriptplan.txt
     cat scriptplan.txt
     for line in $( egrep -v '(^[[:space:]]*#|^[[:space:]]*$)' scriptplan.txt ); do
         echo "Executing ${line}..."
+        # shellcheck source=${line} disable=SC1091
         source ${line}
     done
 fi
 
-cat > ${WORKSPACE}/controller-script.sh <<EOF
+cat > ${WORKSPACE}/configuration-script.sh <<EOF
 
 echo "Changing to /tmp"
 cd /tmp
 
 echo "Downloading the distribution..."
-wget --no-verbose '${ACTUALBUNDLEURL}'
+wget --progress=dot:mega '${ACTUAL_BUNDLE_URL}'
 
 echo "Extracting the new controller..."
 unzip -q ${BUNDLE}
 
 echo "Configuring the startup features..."
 FEATURESCONF=/tmp/${BUNDLEFOLDER}/etc/org.apache.karaf.features.cfg
-sed -ie "s/featuresBoot=.*/featuresBoot=config,standard,region,package,kar,ssh,management,${ACTUALFEATURES}/g" \${FEATURESCONF}
-sed -ie "s%mvn:org.opendaylight.integration/features-integration-index/${BUNDLEVERSION}/xml/features%mvn:org.opendaylight.integration/features-integration-index/${BUNDLEVERSION}/xml/features,mvn:org.opendaylight.integration/features-integration-test/${BUNDLEVERSION}/xml/features%g" \${FEATURESCONF}
+CUSTOMPROP=/tmp/${BUNDLEFOLDER}/etc/custom.properties
+sed -ie "s/\(featuresBoot=\|featuresBoot =\)/featuresBoot = ${ACTUALFEATURES},/g" \${FEATURESCONF}
+sed -ie "s%mvn:org.opendaylight.integration/features-integration-index/${BUNDLEVERSION}/xml/features%mvn:org.opendaylight.integration/features-integration-index/${BUNDLEVERSION}/xml/features,mvn:org.opendaylight.integration/features-integration-test/${BUNDLEVERSION}/xml/features,mvn:org.apache.karaf.decanter/apache-karaf-decanter/1.0.0/xml/features%g" \${FEATURESCONF}
 cat \${FEATURESCONF}
 
+if [ "${ODL_ENABLE_L3_FWD}" == "yes" ]; then
+    echo "Enable the l3.fwd in custom.properties..."
+    echo "ovsdb.l3.fwd.enabled=yes" >> \${CUSTOMPROP}
+fi
+cat \${CUSTOMPROP}
+
 echo "Configuring the log..."
 LOGCONF=/tmp/${BUNDLEFOLDER}/etc/org.ops4j.pax.logging.cfg
 sed -ie 's/log4j.appender.out.maxBackupIndex=10/log4j.appender.out.maxBackupIndex=1/g' \${LOGCONF}
 # FIXME: Make log size limit configurable from build parameter.
-sed -ie 's/log4j.appender.out.maxFileSize=1MB/log4j.appender.out.maxFileSize=100GB/g' \${LOGCONF}
+sed -ie 's/log4j.appender.out.maxFileSize=1MB/log4j.appender.out.maxFileSize=30GB/g' \${LOGCONF}
+echo "log4j.logger.org.opendaylight.yangtools.yang.parser.repo.YangTextSchemaContextResolver = WARN" >> \${LOGCONF}
 cat \${LOGCONF}
 
-echo "Configure max memory..."
+echo "Configure java home and max memory..."
 MEMCONF=/tmp/${BUNDLEFOLDER}/bin/setenv
+sed -ie 's%^# export JAVA_HOME%export JAVA_HOME="\${JAVA_HOME:-${JAVA_HOME}}"%g' \${MEMCONF}
 sed -ie 's/JAVA_MAX_MEM="2048m"/JAVA_MAX_MEM="${CONTROLLERMEM}"/g' \${MEMCONF}
 cat \${MEMCONF}
 
 echo "Listing all open ports on controller system..."
-netstat -natu
-
-if [ ${JDKVERSION} == 'openjdk8' ]; then
-    echo "Setting the JRE Version to 8"
-    # dynamic_verify does not allow sudo, JAVA_HOME should be enough for karaf start.
-    # sudo /usr/sbin/alternatives --set java /usr/lib/jvm/java-1.8.0-openjdk-1.8.0.60-2.b27.el7_1.x86_64/jre/bin/java
-    export JAVA_HOME=/usr/lib/jvm/java-1.8.0
-elif [ ${JDKVERSION} == 'openjdk7' ]; then
-    echo "Setting the JRE Version to 7"
-    # dynamic_verify does not allow sudo, JAVA_HOME should be enough for karaf start.
-    # sudo /usr/sbin/alternatives --set java /usr/lib/jvm/java-1.7.0-openjdk-1.7.0.85-2.6.1.2.el7_1.x86_64/jre/bin/java
-    export JAVA_HOME=/usr/lib/jvm/java-1.7.0
-fi
-echo "JAVA_HOME is \${JAVA_HOME}"
+netstat -pnatu
+
+echo "Set Java version"
+sudo /usr/sbin/alternatives --install /usr/bin/java java ${JAVA_HOME}/bin/java 1
+sudo /usr/sbin/alternatives --set java ${JAVA_HOME}/bin/java
+echo "JDK default version..."
+java -version
+
+echo "Set JAVA_HOME"
+export JAVA_HOME="${JAVA_HOME}"
 # Did you know that in HERE documents, single quote is an ordinary character, but backticks are still executing?
 JAVA_RESOLVED=\`readlink -e "\${JAVA_HOME}/bin/java"\`
 echo "Java binary pointed at by JAVA_HOME: \${JAVA_RESOLVED}"
-echo "JDK default version ..."
-java -version
+
+if [ "${ENABLE_HAPROXY_FOR_NEUTRON}" == "yes" ]; then
+
+    # Copy shard file if exists
+    if [ -f /tmp/custom_shard_config.txt ]; then
+        echo "Custom shard config exists!!!"
+        echo "Copying the shard config..."
+        cp /tmp/custom_shard_config.txt /tmp/${BUNDLEFOLDER}/bin/
+    fi
+
+    echo "Configuring cluster"
+    /tmp/${BUNDLEFOLDER}/bin/configure_cluster.sh \$1 \$2
+
+    echo "Dump akka.conf"
+    cat ${AKKACONF}
+
+    echo "Dump modules.conf"
+    cat ${MODULESCONF}
+
+     echo "Dump module-shards.conf"
+     cat ${MODULESHARDSCONF}
+fi
+
+EOF
+
+# Create the startup script to be run on controller.
+cat > ${WORKSPACE}/startup-script.sh <<EOF
+
+echo "Redirecting karaf console output to karaf_console.log"
+export KARAF_REDIRECT="/tmp/${BUNDLEFOLDER}/data/log/karaf_console.log"
 
 echo "Starting controller..."
 /tmp/${BUNDLEFOLDER}/bin/start
 
+EOF
+
+cat > ${WORKSPACE}/post-startup-script.sh <<EOF
+
 echo "Waiting for controller to come up..."
 COUNT="0"
 while true; do
     RESP="\$( curl --user admin:admin -sL -w "%{http_code} %{url_effective}\\n" http://localhost:8181/restconf/modules -o /dev/null )"
     echo \$RESP
-    if [[ \$RESP == *"200"* ]]; then
+    if [ "${ENABLE_HAPROXY_FOR_NEUTRON}" == "yes" ]; then
+        SHARD="\$( curl --user admin:admin -sL -w "%{http_code} %{url_effective}\\n" http://localhost:8181/jolokia/read/org.opendaylight.controller:Category=Shards,name=\member-\$1-shard-inventory-config,type=DistributedConfigDatastore)"
+        echo \$SHARD
+    fi
+    if ([[ \$RESP == *"200"* ]] && ([[ "${ENABLE_HAPROXY_FOR_NEUTRON}" != "yes" ]] || [[ \$SHARD  == *'"status":200'* ]])); then
         echo Controller is UP
         break
     elif (( "\$COUNT" > "600" )); then
@@ -97,7 +148,7 @@ while true; do
         echo "Dumping last 500K bytes of karaf log..."
         tail --bytes=500K "/tmp/${BUNDLEFOLDER}/data/log/karaf.log"
         echo "Listing all open ports on controller system"
-        netstat -natu
+        netstat -pnatu
         exit 1
     else
         COUNT=\$(( \${COUNT} + 5 ))
@@ -106,15 +157,12 @@ while true; do
     fi
 done
 
-echo "Cool down for ${COOLDOWN_PERIOD} seconds :)..."
-sleep ${COOLDOWN_PERIOD}
-
 echo "Listing all open ports on controller system..."
-netstat -natu
+netstat -pnatu
 
 function exit_on_log_file_message {
     echo "looking for \"\$1\" in log file"
-    if grep --quiet "\$1" /tmp/${BUNDLEFOLDER}/data/log/karaf.log; then
+    if grep --quiet "\$1" "/tmp/${BUNDLEFOLDER}/data/log/karaf.log"; then
         echo ABORTING: found "\$1"
         echo "Dumping first 500K bytes of karaf log..."
         head --bytes=500K "/tmp/${BUNDLEFOLDER}/data/log/karaf.log"
@@ -129,35 +177,152 @@ exit_on_log_file_message 'server is unhealthy'
 
 EOF
 
-scp ${WORKSPACE}/controller-script.sh ${ODL_SYSTEM_IP}:/tmp
-ssh ${ODL_SYSTEM_IP} 'bash /tmp/controller-script.sh'
+[ "$NUM_OPENSTACK_SITES" ] || NUM_OPENSTACK_SITES=1
+NUM_ODLS_PER_SITE=$((NUM_ODL_SYSTEM / NUM_OPENSTACK_SITES))
+for i in `seq 1 ${NUM_OPENSTACK_SITES}`
+do
+    # Get full list of ODL nodes for this site
+    odl_node_list=
+    for j in `seq 1 ${NUM_ODLS_PER_SITE}`
+    do
+        odl_ip=ODL_SYSTEM_$(((i - 1) * NUM_ODLS_PER_SITE + j))_IP
+        odl_node_list="${odl_node_list} ${!odl_ip}"
+    done
+
+    for j in `seq 1 ${NUM_ODLS_PER_SITE}`
+    do
+        odl_ip=ODL_SYSTEM_$(((i - 1) * NUM_ODLS_PER_SITE + j))_IP
+        # Copy over the config script to controller and execute it (parameters are used only for cluster)
+        echo "Execute the configuration script on controller ${!odl_ip} for index $j with node list ${odl_node_list}"
+        scp ${WORKSPACE}/configuration-script.sh ${!odl_ip}:/tmp
+        ssh ${!odl_ip} "bash /tmp/configuration-script.sh ${j} '${odl_node_list}'"
+    done
+done
+
+echo "Locating config plan to use..."
+configplan_filepath="${WORKSPACE}/test/csit/configplans/${STREAMTESTPLAN}"
+if [ ! -f "${configplan_filepath}" ]; then
+    configplan_filepath="${WORKSPACE}/test/csit/configplans/${TESTPLAN}"
+fi
+
+if [ -f "${configplan_filepath}" ]; then
+    echo "configplan exists!!!"
+    echo "Changing the configplan path..."
+    cat ${configplan_filepath} | sed "s:integration:${WORKSPACE}:" > configplan.txt
+    cat configplan.txt
+    for line in $( egrep -v '(^[[:space:]]*#|^[[:space:]]*$)' configplan.txt ); do
+        echo "Executing ${line}..."
+        # shellcheck source=${line} disable=SC1091
+        source ${line}
+    done
+fi
+
+# Copy over the startup script to controller and execute it.
+for i in `seq 1 ${NUM_ODL_SYSTEM}`
+do
+    CONTROLLERIP=ODL_SYSTEM_${i}_IP
+    echo "Execute the startup script on controller ${!CONTROLLERIP}"
+    scp ${WORKSPACE}/startup-script.sh ${!CONTROLLERIP}:/tmp
+    ssh ${!CONTROLLERIP} "bash /tmp/startup-script.sh"
+done
+
+seed_index=1
+for i in `seq 1 ${NUM_ODL_SYSTEM}`
+do
+    CONTROLLERIP=ODL_SYSTEM_${i}_IP
+    echo "Execute the post startup script on controller ${!CONTROLLERIP}"
+    scp ${WORKSPACE}/post-startup-script.sh ${!CONTROLLERIP}:/tmp
+    ssh ${!CONTROLLERIP} "bash /tmp/post-startup-script.sh $(( seed_index++ ))"
+    if [ $(( $i % (${NUM_ODL_SYSTEM} / ${NUM_OPENSTACK_SITES}) )) == 0 ]; then
+        seed_index=1
+    fi
+done
+
+echo "Cool down for ${COOLDOWN_PERIOD} seconds :)..."
+sleep ${COOLDOWN_PERIOD}
+
+echo "Generating controller variables..."
+for i in `seq 1 ${NUM_ODL_SYSTEM}`
+do
+    CONTROLLERIP=ODL_SYSTEM_${i}_IP
+    odl_variables=${odl_variables}" -v ${CONTROLLERIP}:${!CONTROLLERIP}"
+    echo "Lets's take the karaf thread dump"
+    KARAF_PID=$(ssh ${!CONTROLLERIP} "ps aux | grep ${KARAF_ARTIFACT} | grep -v grep | tr -s ' ' | cut -f2 -d' '")
+    ssh ${!CONTROLLERIP} "jstack $KARAF_PID"> ${WORKSPACE}/karaf_${i}_threads_before.log || true
+done
+
+if [ ${NUM_OPENSTACK_SYSTEM} -gt 0 ]; then
+   echo "Exiting without running tests to deploy openstack for testing"
+   exit
+fi
+
+echo "Generating mininet variables..."
+for i in `seq 1 ${NUM_TOOLS_SYSTEM}`
+do
+    MININETIP=TOOLS_SYSTEM_${i}_IP
+    tools_variables=${tools_variables}" -v ${MININETIP}:${!MININETIP}"
+done
+
+echo "Locating test plan to use..."
+testplan_filepath="${WORKSPACE}/test/csit/testplans/${STREAMTESTPLAN}"
+if [ ! -f "${testplan_filepath}" ]; then
+    testplan_filepath="${WORKSPACE}/test/csit/testplans/${TESTPLAN}"
+fi
 
 echo "Changing the testplan path..."
-cat ${WORKSPACE}/test/csit/testplans/${TESTPLAN} | sed "s:integration:${WORKSPACE}:" > testplan.txt
+cat "${testplan_filepath}" | sed "s:integration:${WORKSPACE}:" > testplan.txt
 cat testplan.txt
-
 SUITES=$( egrep -v '(^[[:space:]]*#|^[[:space:]]*$)' testplan.txt | tr '\012' ' ' )
 
 echo "Starting Robot test suites ${SUITES} ..."
-pybot -N ${TESTPLAN} -c critical -e exclude -v BUNDLEFOLDER:${BUNDLEFOLDER} -v WORKSPACE:/tmp \
--v BUNDLE_URL:${ACTUALBUNDLEURL} -v NEXUSURL_PREFIX:${NEXUSURL_PREFIX} \
--v CONTROLLER:${ODL_SYSTEM_IP} -v ODL_SYSTEM_IP:${ODL_SYSTEM_IP} -v CONTROLLER_USER:${USER} -v ODL_SYSTEM_USER:${USER} \
+pybot -N ${TESTPLAN} --removekeywords wuks -c critical -e exclude -e skip_if_${DISTROSTREAM} -v BUNDLEFOLDER:${BUNDLEFOLDER} -v WORKSPACE:/tmp \
+-v JAVA_HOME:${JAVA_HOME} -v BUNDLE_URL:${ACTUAL_BUNDLE_URL} -v NEXUSURL_PREFIX:${NEXUSURL_PREFIX} \
+-v CONTROLLER:${ODL_SYSTEM_IP} -v ODL_SYSTEM_IP:${ODL_SYSTEM_IP} -v ODL_SYSTEM_1_IP:${ODL_SYSTEM_IP} \
+-v CONTROLLER_USER:${USER} -v ODL_SYSTEM_USER:${USER} \
 -v TOOLS_SYSTEM_IP:${TOOLS_SYSTEM_IP} -v TOOLS_SYSTEM_2_IP:${TOOLS_SYSTEM_2_IP} -v TOOLS_SYSTEM_3_IP:${TOOLS_SYSTEM_3_IP} \
 -v TOOLS_SYSTEM_4_IP:${TOOLS_SYSTEM_4_IP} -v TOOLS_SYSTEM_5_IP:${TOOLS_SYSTEM_5_IP} -v TOOLS_SYSTEM_6_IP:${TOOLS_SYSTEM_6_IP} \
--v TOOLS_SYSTEM_USER:${USER} -v JDKVERSION:${JDKVERSION} -v ODL_STREAM:${DISTROSTREAM} \
+-v TOOLS_SYSTEM_USER:${USER} -v JDKVERSION:${JDKVERSION} -v ODL_STREAM:${DISTROSTREAM} -v NUM_ODL_SYSTEM:${NUM_ODL_SYSTEM} \
 -v MININET:${TOOLS_SYSTEM_IP} -v MININET1:${TOOLS_SYSTEM_2_IP} -v MININET2:${TOOLS_SYSTEM_3_IP} \
 -v MININET3:${TOOLS_SYSTEM_4_IP} -v MININET4:${TOOLS_SYSTEM_5_IP} -v MININET5:${TOOLS_SYSTEM_6_IP} \
 -v MININET_USER:${USER} -v USER_HOME:${HOME} ${TESTOPTIONS} ${SUITES} || true
 # FIXME: Sort (at least -v) options alphabetically.
 
-echo "Killing ODL and fetching Karaf log..."
-set +e  # We do not want to create red dot just because something went wrong while fetching logs.
-ssh "${ODL_SYSTEM_IP}" tail --bytes=1M "/tmp/${BUNDLEFOLDER}/data/log/karaf.log" > "karaf.log"
-ssh "${ODL_SYSTEM_IP}" bash -c 'ps axf | grep karaf | grep -v grep | awk '"'"'{print "kill -9 " $1}'"'"' | sh'
+echo "Examining the files in data/log and checking filesize"
+ssh ${ODL_SYSTEM_IP} "ls -altr /tmp/${BUNDLEFOLDER}/data/log/"
+ssh ${ODL_SYSTEM_IP} "du -hs /tmp/${BUNDLEFOLDER}/data/log/*"
+
+for i in `seq 1 ${NUM_ODL_SYSTEM}`
+do
+    CONTROLLERIP=ODL_SYSTEM_${i}_IP
+    echo "Lets's take the karaf thread dump again..."
+    KARAF_PID=$(ssh ${!CONTROLLERIP} "ps aux | grep ${KARAF_ARTIFACT} | grep -v grep | tr -s ' ' | cut -f2 -d' '")
+    ssh ${!CONTROLLERIP} "jstack $KARAF_PID"> ${WORKSPACE}/karaf_${i}_threads_after.log || true
+    echo "Killing ODL"
+    set +e  # We do not want to create red dot just because something went wrong while fetching logs.
+    ssh "${!CONTROLLERIP}" bash -c 'ps axf | grep karaf | grep -v grep | awk '"'"'{print "kill -9 " $1}'"'"' | sh'
+done
+
 sleep 5
-ssh "${ODL_SYSTEM_IP}" xz -9ekvv "/tmp/${BUNDLEFOLDER}/data/log/karaf.log"
-scp "${ODL_SYSTEM_IP}:/tmp/${BUNDLEFOLDER}/data/log/karaf.log.xz" .
+# FIXME: Unify the copy process between various scripts.
+# TODO: Use rsync.
+for i in `seq 1 ${NUM_ODL_SYSTEM}`
+do
+    CONTROLLERIP=ODL_SYSTEM_${i}_IP
+    echo "Compressing karaf.log ${i}"
+    ssh ${!CONTROLLERIP} gzip --best /tmp/${BUNDLEFOLDER}/data/log/karaf.log
+    echo "Fetching compressed karaf.log ${i}"
+    scp "${!CONTROLLERIP}:/tmp/${BUNDLEFOLDER}/data/log/karaf.log.gz" "odl${i}_karaf.log.gz" && ssh ${!CONTROLLERIP} rm -f "/tmp/${BUNDLEFOLDER}/data/log/karaf.log.gz"
+    # TODO: Should we compress the output log file as well?
+    scp "${!CONTROLLERIP}:/tmp/${BUNDLEFOLDER}/data/log/karaf_console.log" "odl${i}_karaf_console.log" && ssh ${!CONTROLLERIP} rm -f "/tmp/${BUNDLEFOLDER}/data/log/karaf_console.log"
+    echo "Fetch GC logs"
+    # FIXME: Put member index in filename, instead of directory name.
+    mkdir -p "gclogs-${i}"
+    scp "${!CONTROLLERIP}:/tmp/${BUNDLEFOLDER}/data/log/*.log" "gclogs-${i}/" && ssh ${!CONTROLLERIP} rm -f "/tmp/${BUNDLEFOLDER}/data/log/*.log"
+done
+
+echo "Examine copied files"
+ls -lt
+
 true  # perhaps Jenkins is testing last exit code
 
 # vim: ts=4 sw=4 sts=4 et ft=sh :
-