X-Git-Url: https://git.opendaylight.org/gerrit/gitweb?a=blobdiff_plain;f=jjb%2Fintegration%2Fintegration-deploy-openstack-run-test.sh;h=5e3421dcfb2774cfb1111e5403e17f9d9400f1a2;hb=5a2c1a1d8fd167ac3e96fdc5f13a44edd59536a9;hp=6a1b642338100b2b89ecf7933e1608ee8086e79c;hpb=85c39276c55d5c2cc091f286b6034d3fe7bc386e;p=releng%2Fbuilder.git

diff --git a/jjb/integration/integration-deploy-openstack-run-test.sh b/jjb/integration/integration-deploy-openstack-run-test.sh
index 6a1b64233..5e3421dcf 100644
--- a/jjb/integration/integration-deploy-openstack-run-test.sh
+++ b/jjb/integration/integration-deploy-openstack-run-test.sh
@@ -1,4 +1,4 @@
-#@IgnoreInspection BashAddShebang
+#!/bin/bash
 # Activate robotframework virtualenv
 # ${ROBOT_VENV} comes from the integration-install-robotframework.sh
 # script.
@@ -475,29 +475,37 @@ echo -e "\nenv after openrc\n"
 env
 EOF
 
+    # Since this log collection work is happening before the archive build macro which also
+    # creates the ${WORKSPACE}/archives dir, we have to do it here first.  The mkdir in the
+    # archives build step will essentially be a noop.
+    mkdir -p ${WORKSPACE}/archives
+
     sleep 5
     # FIXME: Do not create .tar and gzip before copying.
     for i in `seq 1 ${NUM_ODL_SYSTEM}`; do
         CONTROLLERIP=ODL_SYSTEM_${i}_IP
-        ${SSH} "${!CONTROLLERIP}"  "cp -r /tmp/${BUNDLEFOLDER}/data/log /tmp/odl_log"
-        ${SSH} "${!CONTROLLERIP}"  "tar -cf /tmp/odl${i}_karaf.log.tar /tmp/odl_log/*"
-        scp "${!CONTROLLERIP}:/tmp/odl${i}_karaf.log.tar" "${WORKSPACE}/odl${i}_karaf.log.tar"
-        ${SSH} "${!CONTROLLERIP}"  "tar -cf /tmp/odl${i}_zrpcd.log.tar /tmp/zrpcd.init.log"
-        scp "${!CONTROLLERIP}:/tmp/odl${i}_zrpcd.log.tar" "${WORKSPACE}/odl${i}_zrpcd.log.tar"
-        tar -xvf ${WORKSPACE}/odl${i}_karaf.log.tar -C . --strip-components 2 --transform s/karaf/odl${i}_karaf/g
-        grep "ROBOT MESSAGE\| ERROR " odl${i}_karaf.log > odl${i}_err.log
-        # Print ROBOT lines, Print Caused by...Exception: lines,
-        # Print Exception{ lines as well as the previous line that has the timestamp for context
-        sed -n -e '/ROBOT MESSAGE/P' -e '/Caused by.*Exception:/P' -e '$!N;/Exception:/P;D' -e '$!N;/Exception{/P;D' odl${i}_karaf.log > odl${i}_exception.log
-        grep "ROBOT MESSAGE\| ERROR \| WARN \|Exception" odl${i}_karaf.log > odl${i}_err_warn_exception.log
-        rm ${WORKSPACE}/odl${i}_karaf.log.tar
+        NODE_FOLDER="odl_${i}"
+        mkdir -p ${NODE_FOLDER}
+        ${SSH} ${!CONTROLLERIP} "journalctl > /tmp/journalctl.log"
+        scp ${!CONTROLLERIP}:/tmp/journalctl.log ${NODE_FOLDER}
+        ${SSH} ${!CONTROLLERIP} "dmesg -T > /tmp/dmesg.log"
+        scp ${!CONTROLLERIP}:/tmp/dmesg.log ${NODE_FOLDER}
+        ${SSH} ${!CONTROLLERIP} "cp -r /tmp/${BUNDLEFOLDER}/data/log /tmp/odl_log"
+        ${SSH} ${!CONTROLLERIP} "tar -cf /tmp/odl${i}_karaf.log.tar /tmp/odl_log/*"
+        scp ${!CONTROLLERIP}:/tmp/odl${i}_karaf.log.tar ${NODE_FOLDER}
+        ${SSH} ${!CONTROLLERIP} "tar -cf /tmp/odl${i}_zrpcd.log.tar /tmp/zrpcd.init.log"
+        scp ${!CONTROLLERIP}:/tmp/odl${i}_zrpcd.log.tar ${NODE_FOLDER}
+        tar -xvf ${NODE_FOLDER}/odl${i}_karaf.log.tar -C ${NODE_FOLDER} --strip-components 2 --transform s/karaf/odl${i}_karaf/g
+        grep "ROBOT MESSAGE\| ERROR " ${NODE_FOLDER}/odl${i}_karaf.log > ${NODE_FOLDER}/odl${i}_err.log
+        grep "ROBOT MESSAGE\| ERROR \| WARN \|Exception" \
+            ${NODE_FOLDER}/odl${i}_karaf.log > ${NODE_FOLDER}/odl${i}_err_warn_exception.log
+        # Print ROBOT lines and print Exception lines. For exception lines also print the previous line for context
+        sed -n -e '/ROBOT MESSAGE/P' -e '$!N;/Exception/P;D' ${NODE_FOLDER}/odl${i}_karaf.log > ${NODE_FOLDER}/odl${i}_exception.log
+        rm ${NODE_FOLDER}/odl${i}_karaf.log.tar
+        mv karaf_${i}_threads* ${NODE_FOLDER}
+        mv ${NODE_FOLDER} ${WORKSPACE}/archives/
     done
 
-    # Since this log collection work is happening before the archive build macro which also
-    # creates the ${WORKSPACE}/archives dir, we have to do it here first.  The mkdir in the
-    # archives build step will essentially be a noop.
-    mkdir -p ${WORKSPACE}/archives
-
     print_job_parameters > ${WORKSPACE}/archives/params.txt
 
     # Control Node
@@ -667,6 +675,43 @@ function get_service () {
     set -e
 }
 
+# Check if rabbitmq is ready by looking for a pid in it's status.
+# The function returns the status of the grep command which callers can check.
+function is_rabbitmq_ready() {
+    local -r ip=$1
+    rm -f rabbit.txt
+    ${SSH} ${ip} "sudo rabbitmqctl status" > rabbit.txt
+    grep pid rabbit.txt
+}
+
+# retry the given command ($3) until success for a number of iterations ($1)
+# sleeping ($2) between tries.
+function retry() {
+    set +e
+    local -r -i max_tries=${1}
+    local -r -i sleep_time=${2}
+    local -r cmd=${3}
+    local -i retries=1
+    local -i rc=1
+    while true; do
+        echo "retry ${cmd}: attempt: ${retries}"
+        ${cmd}
+        rc=$?
+        if ((${rc} == 0)); then
+            break;
+        else
+            if ((${retries} == ${max_tries})); then
+                break
+            else
+                ((retries++))
+                sleep ${sleep_time}
+            fi
+        fi
+    done
+    set -e
+    return ${rc}
+}
+
 # if we are using the new netvirt impl, as determined by the feature name
 # odl-netvirt-openstack (note: old impl is odl-ovsdb-openstack) then we
 # want PROVIDER_MAPPINGS to be used -- this should be fixed if we want to support
@@ -824,9 +869,17 @@ done
 # AccessRefused: (0, 0): (403) ACCESS_REFUSED - Login was refused using authentication mechanism AMQPLAIN. For details see the broker logfile.
 # Compare that timestamp to this log in the control stack.log: sudo rabbitmqctl set_permissions -p nova_cell1 stackrabbit
 # If the n-cpu.log is earlier than the control stack.log timestamp then the failure condition is likely hit.
-# TODO: modify devstack to wait for rabbitmq to be available on the controller before starting nova-compute.
-echo "Sleeping for 360s to allow controller to create nova_cell1 before the computes need it"
-sleep 360
+WAIT_FOR_RABBITMQ_MINUTES=60
+echo "Wait a maximum of ${WAIT_FOR_RABBITMQ_MINUTES}m until rabbitmq is ready to allow the controller to create nova_cell1 before the computes need it"
+retry ${WAIT_FOR_RABBITMQ_MINUTES} 60 "is_rabbitmq_ready ${OPENSTACK_CONTROL_NODE_1_IP}"
+rc=$?
+if ((${rc} == 0)); then
+    echo "rabbitmq is ready, starting ${NUM_OPENSTACK_COMPUTE_NODES} compute(s)"
+else
+    echo "rabbitmq was not ready in ${WAIT_FOR_RABBITMQ_MINUTES}m"
+    collect_logs
+    exit 1
+fi
 
 for i in `seq 1 ${NUM_OPENSTACK_COMPUTE_NODES}`; do
     NUM_COMPUTES_PER_SITE=$((NUM_OPENSTACK_COMPUTE_NODES / NUM_OPENSTACK_SITES))
@@ -1028,6 +1081,10 @@ for i in `seq 1 ${NUM_OPENSTACK_SITES}`; do
         sudo ip netns exec pnf_ns ifconfig pnf_veth1 up ${EXTNET_PNF_IP}/24;
         sudo ovs-vsctl add-port ${PUBLIC_BRIDGE} pnf_veth0;
     "
+    # Control Node - set VXLAN TEP IP for Genius Auto TZ
+    ${SSH} ${!CONTROLIP} "
+        sudo ovs-vsctl set O . external_ids:tep-ip=${!CONTROLIP};
+    "
 
     # Control Node - external net internet address simulation
     ${SSH} ${!CONTROLIP} "
@@ -1048,6 +1105,10 @@ for i in `seq 1 ${NUM_OPENSTACK_SITES}`; do
         ${SSH} $compute_ip "
             sudo ovs-vsctl add-port $PUBLIC_BRIDGE $CONTROLPORT -- set interface $CONTROLPORT type=vxlan options:local_ip=$compute_ip options:remote_ip=${!CONTROLIP} options:dst_port=9876 options:key=flow
         "
+         #Compute Node - set VXLAN TEP IP for Genius Auto TZ
+        ${SSH} $compute_ip "
+            sudo ovs-vsctl set O . external_ids:tep-ip=${compute_ip};
+        "
     done
 done
 
@@ -1079,6 +1140,18 @@ cat testplan.txt
 # Use the testplan if specific SUITES are not defined.
 if [ -z "${SUITES}" ]; then
     SUITES=`egrep -v '(^[[:space:]]*#|^[[:space:]]*$)' testplan.txt | tr '\012' ' '`
+else
+    newsuites=""
+    workpath="${WORKSPACE}/test/csit/suites"
+    for suite in ${SUITES}; do
+        fullsuite="${workpath}/${suite}"
+        if [ -z ${newsuites} ]; then
+            newsuites+=${fullsuite}
+        else
+            newsuites+=" "${fullsuite}
+        fi
+    done
+    SUITES=${newsuites}
 fi
 
 # TODO: run openrc on control node and then scrape the vars from it
@@ -1100,7 +1173,16 @@ source /tmp/os_netvirt_client_rc
 
 echo "Starting Robot test suites ${SUITES} ..."
 # please add pybot -v arguments on a single line and alphabetized
-pybot -N ${TESTPLAN} --removekeywords wuks --flattenkeywords for -c critical -e exclude -e skip_if_${DISTROSTREAM} \
+suite_num=0
+for suite in ${SUITES}; do
+    # prepend a incrmental counter to the suite name so that the full robot log combining all the suites as is done
+    # in the rebot step below will list all the suites in chronological order as rebot seems to alphabatize them
+    let "suite_num = suite_num + 1"
+    suite_index="$(printf %02d ${suite_num})"
+    suite_name="$(basename ${suite} | cut -d. -f1)"
+    log_name="${suite_index}_${suite_name}"
+    pybot -N ${log_name} --removekeywords wuks -c critical -e exclude -e skip_if_${DISTROSTREAM} \
+    --log log_${log_name}.html --report None --output output_${log_name}.xml \
     -v BUNDLEFOLDER:${BUNDLEFOLDER} \
     -v BUNDLE_URL:${ACTUAL_BUNDLE_URL} \
     -v CONTROLLER_USER:${USER} \
@@ -1146,7 +1228,10 @@ pybot -N ${TESTPLAN} --removekeywords wuks --flattenkeywords for -c critical -e
     -v TOOLS_SYSTEM_2_IP:${TOOLS_SYSTEM_2_IP} \
     -v USER_HOME:${HOME} \
     -v WORKSPACE:/tmp \
-    ${TESTOPTIONS} ${SUITES} || true
+    ${TESTOPTIONS} ${suite} || true
+done
+#rebot exit codes seem to be different
+rebot --output ${WORKSPACE}/output.xml --log log_full.html --report None -N openstack output_*.xml || true
 
 echo "Examining the files in data/log and checking file size"
 ssh ${ODL_SYSTEM_IP} "ls -altr /tmp/${BUNDLEFOLDER}/data/log/"