Resource ../../../libraries/ClusterOpenFlow.robot
Resource ../../../libraries/TemplatedRequests.robot
Resource ../../../libraries/MininetKeywords.robot
-Resource ../../../libraries/FlowLib.robot
Resource ../../../libraries/Utils.robot
Resource ../../../variables/Variables.robot
Check Linear Topology
[Documentation] Check Linear Topology.
- BuiltIn.Wait Until Keyword Succeeds 30s 1s FlowLib.Check Linear Topology ${SWITCHES}
+ BuiltIn.Wait Until Keyword Succeeds 30s 1s Check Linear Topology ${SWITCHES}
Check Flows In Operational DS
[Documentation] Check Groups after mininet starts.
- BuiltIn.Wait Until Keyword Succeeds 30s 1s FlowLib.Check Number Of Flows ${all_flows}
+ BuiltIn.Wait Until Keyword Succeeds 30s 1s Check Number Of Flows ${all_flows}
Check Groups In Operational DS
[Documentation] Check Flows after mininet starts.
- FlowLib.Check Number Of Groups ${all_groups}
+ Check Number Of Groups ${all_groups}
Check Flows In Switch
- [Documentation] Check Flows after mininet starts.
+ [Documentation] Check Flows in switch after mininet starts.
MininetKeywords.Check Flows In Mininet ${mininet_conn_id} ${all_flows}
Check Entity Owner Status And Find Owner and Successor Before Fail
Check Linear Topology After Disconnect
[Documentation] Check Linear Topology After Disconnecting mininet from owner.
- BuiltIn.Wait Until Keyword Succeeds 30s 1s FlowLib.Check Linear Topology ${SWITCHES}
+ BuiltIn.Wait Until Keyword Succeeds 30s 1s Check Linear Topology ${SWITCHES}
Remove Flows And Groups After Mininet Is Disconnected
[Documentation] Remove 1 group 1&2 and 1 flow in every switch after mininet is disconnected.
Check Flows In Operational DS After Mininet Is Disconnected
[Documentation] Check Flows in Operational DS after mininet is disconnected.
- BuiltIn.Wait Until Keyword Succeeds 30s 1s FlowLib.Check Number Of Flows ${less_flows}
+ BuiltIn.Wait Until Keyword Succeeds 30s 1s Check Number Of Flows ${less_flows}
Check Groups In Operational DS After Mininet Is Disconnected
[Documentation] Check Groups in Operational DS after mininet is disconnected.
- FlowLib.Check Number Of Groups ${less_groups}
+ Check Number Of Groups ${less_groups}
Check Flows In Switch After Mininet Is Disconnected
[Documentation] Check Flows in switch after mininet is disconnected
Check Linear Topology After Reconnect
[Documentation] Check Linear Topology After Reconnect.
- BuiltIn.Wait Until Keyword Succeeds 30s 1s FlowLib.Check Linear Topology ${SWITCHES}
+ BuiltIn.Wait Until Keyword Succeeds 30s 1s Check Linear Topology ${SWITCHES}
Add Flows And Groups After Reconnect
[Documentation] Add 1 group type 1&2 and 1 flow in every switch.
Check Flows After Reconnect In Operational DS
[Documentation] Check Flows in Operational DS after mininet is reconnected.
- BuiltIn.Wait Until Keyword Succeeds 30s 1s FlowLib.Check Number Of Flows ${all_flows}
+ BuiltIn.Wait Until Keyword Succeeds 30s 1s Check Number Of Flows ${all_flows}
Check Groups After Reconnect In Operational DS
[Documentation] Check Groups in Operational DS after mininet is reconnected.
- FlowLib.Check Number Of Groups ${all_groups}
+ Check Number Of Groups ${all_groups}
Check Flows After Reconnect In Switch
[Documentation] Check Flows in switch after mininet is reconnected.
Check No Switches After Disconnect
[Documentation] Check no switches in topology after disconnecting mininet from cluster.
- BuiltIn.Wait Until Keyword Succeeds 30s 1s FlowLib.Check No Switches In Topology ${SWITCHES}
+ BuiltIn.Wait Until Keyword Succeeds 30s 1s Check No Switches In Topology ${SWITCHES}
Remove Flows And Groups While Mininet Is Disconnected
[Documentation] Remove a group and flow while mininet Is Disconnected from cluster.
Check Linear Topology After Mininet Reconnects
[Documentation] Check Linear Topology after reconnect.
- BuiltIn.Wait Until Keyword Succeeds 30s 1s FlowLib.Check Linear Topology ${SWITCHES}
+ BuiltIn.Wait Until Keyword Succeeds 30s 1s Check Linear Topology ${SWITCHES}
Check Flows In Operational DS After Mininet Reconnects
[Documentation] Check Flows in Operational DS after mininet is reconnected.
- BuiltIn.Wait Until Keyword Succeeds 30s 1s FlowLib.Check Number Of Flows ${less_flows}
+ BuiltIn.Wait Until Keyword Succeeds 30s 1s Check Number Of Flows ${less_flows}
Check Groups In Operational DS After Mininet Reconnects
[Documentation] Check Groups in Operational DS after mininet is reconnected to cluster.
- FlowLib.Check Number Of Groups ${less_groups}
+ Check Number Of Groups ${less_groups}
Check Flows In Switch After Mininet Reconnects
[Documentation] Check Flows in switch after mininet is reconnected to cluster.
MininetKeywords.Check Flows In Mininet ${mininet_conn_id} ${less_flows}
+Check Entity Owner Status And Find Owner and Successor Before Stop
+ [Documentation] Check Entity Owner Status and identify owner and successor for first switch s1.
+ ${original_owner} ${original_successor_list} ClusterOpenFlow.Get OpenFlow Entity Owner Status For One Device openflow:1 1
+ ${original_successor}= Collections.Get From List ${original_successor_list} 0
+ BuiltIn.Set Suite Variable ${original_owner}
+ BuiltIn.Set Suite Variable ${original_successor_list}
+ BuiltIn.Set Suite Variable ${original_successor}
+
+Stop Owner Instance
+ [Documentation] Stop Owner Instance and verify it is shutdown
+ ClusterManagement.Stop Single Member ${original_owner}
+ BuiltIn.Set Suite Variable ${new_cluster_list} ${original_successor_list}
+
+Check Shards Status After Stop
+ [Documentation] Check Status for all shards in OpenFlow application.
+ ClusterOpenFlow.Check OpenFlow Shards Status After Cluster Event ${new_cluster_list}
+
+Check Entity Owner Status And Find Owner and Successor After Stop
+ [Documentation] Check Entity Owner Status and identify owner and successor.
+ ${new_owner} ${new_successor_list} ClusterOpenFlow.Get OpenFlow Entity Owner Status For One Device openflow:1 ${original_successor} ${new_cluster_list} after_stop=True
+ ${new_successor}= Collections.Get From List ${new_successor_list} 0
+ BuiltIn.Set Suite Variable ${new_owner}
+ BuiltIn.Set Suite Variable ${new_successor}
+ BuiltIn.Set Suite Variable ${new_successor_list}
+
+Check Linear Topology After Owner Stop
+ [Documentation] Check Linear Topology.
+ BuiltIn.Wait Until Keyword Succeeds 30s 1s Check Linear Topology ${SWITCHES} ${new_owner}
+
+Add Configuration In Owner and Verify After Fail
+ [Documentation] Add Flow in Owner and verify it gets applied from all instances.
+ Add Single Group And Flow ${new_owner}
+
+Check Flows In Operational DS After Owner Is Stopped
+ [Documentation] Check Flows in Operational DS after Owner is Stopped.
+ BuiltIn.Wait Until Keyword Succeeds 30s 1s Check Number Of Flows ${all_flows} ${new_owner}
+
+Check Groups In Operational DS After Owner Is Stopped
+ [Documentation] Check Groups in Operational DS after Owner is Stopped.
+ Check Number Of Groups ${all_groups} ${new_owner}
+
+Check Flows In Switch After Owner Is Stopped
+ [Documentation] Check Flows in switch after Owner is Stopped
+ MininetKeywords.Check Flows In Mininet ${mininet_conn_id} ${all_flows}
+
+Start Old Owner Instance
+ [Documentation] Start old Owner Instance and verify it is up
+ ClusterManagement.Start Single Member ${original_owner}
+
+Check Linear Topology After Owner Restart
+ [Documentation] Check Linear Topology.
+ BuiltIn.Wait Until Keyword Succeeds 30s 1s Check Linear Topology ${SWITCHES}
+
+Remove Configuration In Owner and Verify After Owner Restart
+ [Documentation] Add Flow in Owner and verify it gets applied from all instances.
+ Remove Single Group And Flow ${new_owner}
+
+Check Flows After Owner Restart In Operational DS
+ [Documentation] Check Flows in Operational DS after owner is restarted.
+ BuiltIn.Wait Until Keyword Succeeds 30s 1s Check Number Of Flows ${less_flows}
+
+Check Groups After Owner Restart In Operational DS
+ [Documentation] Check Groups in Operational DS after owner is restarted.
+ Check Number Of Groups ${less_groups}
+
+Check Flows In Switch After Owner Is Restarted
+ [Documentation] Check Flows in switch after Owner is restarted
+ MininetKeywords.Check Flows In Mininet ${mininet_conn_id} ${less_flows}
+
Restart Cluster
[Documentation] Stop and Start cluster.
# Try to stop contoller, if stop does not work or takes too long, kill controller.
Check Linear Topology After Controller Restarts
[Documentation] Check Linear Topology after controller restarts.
- BuiltIn.Wait Until Keyword Succeeds 300s 2s FlowLib.Check Linear Topology ${SWITCHES}
+ BuiltIn.Wait Until Keyword Succeeds 300s 2s Check Linear Topology ${SWITCHES}
+
+Add Flow And Group After Restart
+ [Documentation] Add 1 group type 1&2 and 1 flow in every switch.
+ Add Single Group And Flow
Check Flows In Operational DS After Controller Restarts
[Documentation] Check Flows in Operational DS after controller is restarted.
- BuiltIn.Wait Until Keyword Succeeds 300s 2s FlowLib.Check Number Of Flows ${less_flows}
+ BuiltIn.Wait Until Keyword Succeeds 300s 2s Check Number Of Flows ${all_flows}
Check Groups In Operational DS After Controller Restarts
[Documentation] Check Groups in Operational DS after controller is restarted.
- FlowLib.Check Number Of Groups ${less_groups}
+ Check Number Of Groups ${all_groups}
Check Flows In Switch After Controller Restarts
[Documentation] Check Flows in switch after controller is restarted..
- MininetKeywords.Check Flows In Mininet ${mininet_conn_id} ${less_flows}
+ MininetKeywords.Check Flows In Mininet ${mininet_conn_id} ${all_flows}
Stop Mininet
[Documentation] Stop Mininet.
Check No Switches
[Documentation] Check no switches in topology.
- BuiltIn.Wait Until Keyword Succeeds 5s 1s FlowLib.Check No Switches In Topology ${SWITCHES}
+ BuiltIn.Wait Until Keyword Succeeds 5s 1s Check No Switches In Topology ${SWITCHES}
*** Keywords ***
Initialization Phase
[Documentation] Create controller session and set variables.
ClusterManagement.ClusterManagement_Setup
- # Still need to open controller HTTP session with name session because of old FlowLib.robot library dependency.
RequestsLibrary.Create Session session http://${ODL_SYSTEM_IP}:${RESTCONFPORT} auth=${AUTH}
${switches} Convert To Integer ${SWITCHES}
${iter} Convert To Integer ${ITER}
\ BuiltIn.Log ${output}
Add Groups And Flows
- [Arguments] ${iter}=1
+ [Arguments] ${iter}=1 ${member_index}=1
[Documentation] Add ${ITER} groups type 1 & 2 and flows in every switch.
+ ${session} = Resolve_Http_Session_For_Member member_index=${member_index}
: FOR ${switch} IN RANGE 1 ${switches+1}
- \ TemplatedRequests.Post As Json Templated folder=${VAR_DIR}/add-group-1 mapping={"SWITCH":"${switch}"} session=session iterations=${iter}
- \ TemplatedRequests.Post As Json Templated folder=${VAR_DIR}/add-group-2 mapping={"SWITCH":"${switch}"} session=session iterations=${iter}
- \ TemplatedRequests.Post As Json Templated folder=${VAR_DIR}/add-flow mapping={"SWITCH":"${switch}"} session=session iterations=${iter}
+ \ TemplatedRequests.Post As Json Templated folder=${VAR_DIR}/add-group-1 mapping={"SWITCH":"${switch}"} session=${session} iterations=${iter}
+ \ TemplatedRequests.Post As Json Templated folder=${VAR_DIR}/add-group-2 mapping={"SWITCH":"${switch}"} session=${session} iterations=${iter}
+ \ TemplatedRequests.Post As Json Templated folder=${VAR_DIR}/add-flow mapping={"SWITCH":"${switch}"} session=${session} iterations=${iter}
Add Single Group And Flow
+ [Arguments] ${member_index}=1
[Documentation] Add 1 group 1&2 and 1 flow in every switch.
- Add Groups And Flows 1
+ Add Groups And Flows 1 ${member_index}
Remove Single Group And Flow
+ [Arguments] ${member_index}=1
[Documentation] Remove 1 group 1&2 and 1 flow in every switch.
+ ${session} = Resolve_Http_Session_For_Member member_index=${member_index}
+ : FOR ${switch} IN RANGE 1 ${switches+1}
+ \ RequestsLibrary.Delete Request ${session} ${CONFIG_NODES_API}/node/openflow:${switch}/table/0/flow/1
+ \ RequestsLibrary.Delete Request ${session} ${CONFIG_NODES_API}/node/openflow:${switch}/group/1
+ \ RequestsLibrary.Delete Request ${session} ${CONFIG_NODES_API}/node/openflow:${switch}/group/1000
+
+Check Linear Topology
+ [Arguments] ${switches} ${member_index}=1
+ [Documentation] Check Linear topology.
+ ${session} = Resolve_Http_Session_For_Member member_index=${member_index}
+ ${resp} RequestsLibrary.Get Request ${session} ${OPERATIONAL_TOPO_API}
+ Log ${resp.content}
+ Should Be Equal As Strings ${resp.status_code} 200
+ : FOR ${switch} IN RANGE 1 ${switches+1}
+ \ Should Contain ${resp.content} "node-id":"openflow:${switch}"
+ \ Should Contain ${resp.content} "tp-id":"openflow:${switch}:1"
+ \ Should Contain ${resp.content} "tp-id":"openflow:${switch}:2"
+ \ Should Contain ${resp.content} "source-tp":"openflow:${switch}:2"
+ \ Should Contain ${resp.content} "dest-tp":"openflow:${switch}:2"
+ \ ${edge} Evaluate ${switch}==1 or ${switch}==${switches}
+ \ Run Keyword Unless ${edge} Should Contain ${resp.content} "tp-id":"openflow:${switch}:3"
+ \ Run Keyword Unless ${edge} Should Contain ${resp.content} "source-tp":"openflow:${switch}:3"
+ \ Run Keyword Unless ${edge} Should Contain ${resp.content} "dest-tp":"openflow:${switch}:3
+
+Check No Switches In Inventory
+ [Arguments] ${switches} ${member_index}=1
+ [Documentation] Check no switch is in inventory
+ ${session} = Resolve_Http_Session_For_Member member_index=${member_index}
+ ${resp} RequestsLibrary.Get Request ${session} ${OPERATIONAL_NODES_API}
+ Log ${resp.content}
+ Should Be Equal As Strings ${resp.status_code} 200
+ : FOR ${switch} IN RANGE 1 ${switches+1}
+ \ Should Not Contain ${resp.content} "openflow:${switch}"
+
+Check Number Of Flows
+ [Arguments] ${flows} ${member_index}=1
+ [Documentation] Check number of flows in the inventory.
+ ${session} = Resolve_Http_Session_For_Member member_index=${member_index}
+ ${resp}= RequestsLibrary.Get Request ${session} ${OPERATIONAL_NODES_API}
+ Log ${resp.content}
+ Should Be Equal As Strings ${resp.status_code} 200
+ ${count}= Get Count ${resp.content} "priority"
+ Should Be Equal As Integers ${count} ${flows}
+
+Check Number Of Groups
+ [Arguments] ${groups} ${member_index}=1
+ [Documentation] Check number of groups in the inventory.
+ ${session} = Resolve_Http_Session_For_Member member_index=${member_index}
+ ${resp}= RequestsLibrary.Get Request ${session} ${OPERATIONAL_NODES_API}
+ Log ${resp.content}
+ Should Be Equal As Strings ${resp.status_code} 200
+ ${group_count}= Get Count ${resp.content} "group-type"
+ ${count}= CompareStream.Set_Variable_If_At Least_Boron ${group_count} ${group_count/2}
+ Should Be Equal As Integers ${count} ${groups}
+
+Check No Switches In Topology
+ [Arguments] ${switches} ${member_index}=1
+ [Documentation] Check no switch is in topology
+ ${session} = Resolve_Http_Session_For_Member member_index=${member_index}
+ ${resp} RequestsLibrary.Get Request ${session} ${OPERATIONAL_TOPO_API}
+ Log ${resp.content}
+ Should Be Equal As Strings ${resp.status_code} 200
: FOR ${switch} IN RANGE 1 ${switches+1}
- \ RequestsLibrary.Delete Request session ${CONFIG_NODES_API}/node/openflow:${switch}/table/0/flow/1
- \ RequestsLibrary.Delete Request session ${CONFIG_NODES_API}/node/openflow:${switch}/group/1
- \ RequestsLibrary.Delete Request session ${CONFIG_NODES_API}/node/openflow:${switch}/group/1000
+ \ Should Not Contain ${resp.content} openflow:${switch}
Code Review / integration / test.git / commitdiff