Remove make files since we can build with tox 29/39429/3
authorThanh Ha <thanh.ha@linuxfoundation.org>
Wed, 25 May 2016 17:26:29 +0000 (13:26 -0400)
committerThanh Ha <thanh.ha@linuxfoundation.org>
Wed, 25 May 2016 18:54:09 +0000 (14:54 -0400)
Change-Id: I7aa71fd64460e8e0ec701c91714c7803899490d1
Signed-off-by: Thanh Ha <thanh.ha@linuxfoundation.org>
docs/Makefile [deleted file]
docs/make.bat [deleted file]

diff --git a/docs/Makefile b/docs/Makefile
deleted file mode 100644 (file)
index 4867796..0000000
+++ /dev/null
@@ -1,223 +0,0 @@
-# Makefile for Sphinx documentation
-#
-
-# You can set these variables from the command line.
-SPHINXOPTS    =
-SPHINXBUILD   = sphinx-build
-PAPER         =
-BUILDDIR      = _build
-
-# User-friendly check for sphinx-build
-ifeq ($(shell which $(SPHINXBUILD) >/dev/null 2>&1; echo $$?), 1)
-       $(error The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed, then set the SPHINXBUILD environment variable to point to the full path of the '$(SPHINXBUILD)' executable. Alternatively you can add the directory with the executable to your PATH. If you don\'t have Sphinx installed, grab it from http://sphinx-doc.org/)
-endif
-
-# Internal variables.
-PAPEROPT_a4     = -D latex_paper_size=a4
-PAPEROPT_letter = -D latex_paper_size=letter
-ALLSPHINXOPTS   = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
-# the i18n builder cannot share the environment and doctrees with the others
-I18NSPHINXOPTS  = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
-
-.PHONY: help
-help:
-       @echo "Please use \`make <target>' where <target> is one of"
-       @echo "  html       to make standalone HTML files"
-       @echo "  dirhtml    to make HTML files named index.html in directories"
-       @echo "  singlehtml to make a single large HTML file"
-       @echo "  pickle     to make pickle files"
-       @echo "  json       to make JSON files"
-       @echo "  htmlhelp   to make HTML files and a HTML help project"
-       @echo "  qthelp     to make HTML files and a qthelp project"
-       @echo "  applehelp  to make an Apple Help Book"
-       @echo "  devhelp    to make HTML files and a Devhelp project"
-       @echo "  epub       to make an epub"
-       @echo "  epub3      to make an epub3"
-       @echo "  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
-       @echo "  latexpdf   to make LaTeX files and run them through pdflatex"
-       @echo "  latexpdfja to make LaTeX files and run them through platex/dvipdfmx"
-       @echo "  text       to make text files"
-       @echo "  man        to make manual pages"
-       @echo "  texinfo    to make Texinfo files"
-       @echo "  info       to make Texinfo files and run them through makeinfo"
-       @echo "  gettext    to make PO message catalogs"
-       @echo "  changes    to make an overview of all changed/added/deprecated items"
-       @echo "  xml        to make Docutils-native XML files"
-       @echo "  pseudoxml  to make pseudoxml-XML files for display purposes"
-       @echo "  linkcheck  to check all external links for integrity"
-       @echo "  doctest    to run all doctests embedded in the documentation (if enabled)"
-       @echo "  coverage   to run coverage check of the documentation (if enabled)"
-
-.PHONY: clean
-clean:
-       rm -rf $(BUILDDIR)/*
-
-.PHONY: html
-html:
-       $(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
-       @echo
-       @echo "Build finished. The HTML pages are in $(BUILDDIR)/html."
-
-.PHONY: dirhtml
-dirhtml:
-       $(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml
-       @echo
-       @echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml."
-
-.PHONY: singlehtml
-singlehtml:
-       $(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml
-       @echo
-       @echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml."
-
-.PHONY: pickle
-pickle:
-       $(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle
-       @echo
-       @echo "Build finished; now you can process the pickle files."
-
-.PHONY: json
-json:
-       $(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json
-       @echo
-       @echo "Build finished; now you can process the JSON files."
-
-.PHONY: htmlhelp
-htmlhelp:
-       $(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp
-       @echo
-       @echo "Build finished; now you can run HTML Help Workshop with the" \
-             ".hhp project file in $(BUILDDIR)/htmlhelp."
-
-.PHONY: qthelp
-qthelp:
-       $(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp
-       @echo
-       @echo "Build finished; now you can run "qcollectiongenerator" with the" \
-             ".qhcp project file in $(BUILDDIR)/qthelp, like this:"
-       @echo "# qcollectiongenerator $(BUILDDIR)/qthelp/OpenDaylightRelEngBuilder.qhcp"
-       @echo "To view the help file:"
-       @echo "# assistant -collectionFile $(BUILDDIR)/qthelp/OpenDaylightRelEngBuilder.qhc"
-
-.PHONY: applehelp
-applehelp:
-       $(SPHINXBUILD) -b applehelp $(ALLSPHINXOPTS) $(BUILDDIR)/applehelp
-       @echo
-       @echo "Build finished. The help book is in $(BUILDDIR)/applehelp."
-       @echo "N.B. You won't be able to view it unless you put it in" \
-             "~/Library/Documentation/Help or install it in your application" \
-             "bundle."
-
-.PHONY: devhelp
-devhelp:
-       $(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp
-       @echo
-       @echo "Build finished."
-       @echo "To view the help file:"
-       @echo "# mkdir -p $$HOME/.local/share/devhelp/OpenDaylightRelEngBuilder"
-       @echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/OpenDaylightRelEngBuilder"
-       @echo "# devhelp"
-
-.PHONY: epub
-epub:
-       $(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub
-       @echo
-       @echo "Build finished. The epub file is in $(BUILDDIR)/epub."
-
-.PHONY: epub3
-epub3:
-       $(SPHINXBUILD) -b epub3 $(ALLSPHINXOPTS) $(BUILDDIR)/epub3
-       @echo
-       @echo "Build finished. The epub3 file is in $(BUILDDIR)/epub3."
-
-.PHONY: latex
-latex:
-       $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-       @echo
-       @echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex."
-       @echo "Run \`make' in that directory to run these through (pdf)latex" \
-             "(use \`make latexpdf' here to do that automatically)."
-
-.PHONY: latexpdf
-latexpdf:
-       $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-       @echo "Running LaTeX files through pdflatex..."
-       $(MAKE) -C $(BUILDDIR)/latex all-pdf
-       @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
-
-.PHONY: latexpdfja
-latexpdfja:
-       $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-       @echo "Running LaTeX files through platex and dvipdfmx..."
-       $(MAKE) -C $(BUILDDIR)/latex all-pdf-ja
-       @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
-
-.PHONY: text
-text:
-       $(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text
-       @echo
-       @echo "Build finished. The text files are in $(BUILDDIR)/text."
-
-.PHONY: man
-man:
-       $(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man
-       @echo
-       @echo "Build finished. The manual pages are in $(BUILDDIR)/man."
-
-.PHONY: texinfo
-texinfo:
-       $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
-       @echo
-       @echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo."
-       @echo "Run \`make' in that directory to run these through makeinfo" \
-             "(use \`make info' here to do that automatically)."
-
-.PHONY: info
-info:
-       $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
-       @echo "Running Texinfo files through makeinfo..."
-       make -C $(BUILDDIR)/texinfo info
-       @echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo."
-
-.PHONY: gettext
-gettext:
-       $(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale
-       @echo
-       @echo "Build finished. The message catalogs are in $(BUILDDIR)/locale."
-
-.PHONY: changes
-changes:
-       $(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes
-       @echo
-       @echo "The overview file is in $(BUILDDIR)/changes."
-
-.PHONY: linkcheck
-linkcheck:
-       $(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck
-       @echo
-       @echo "Link check complete; look for any errors in the above output " \
-             "or in $(BUILDDIR)/linkcheck/output.txt."
-
-.PHONY: doctest
-doctest:
-       $(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest
-       @echo "Testing of doctests in the sources finished, look at the " \
-             "results in $(BUILDDIR)/doctest/output.txt."
-
-.PHONY: coverage
-coverage:
-       $(SPHINXBUILD) -b coverage $(ALLSPHINXOPTS) $(BUILDDIR)/coverage
-       @echo "Testing of coverage in the sources finished, look at the " \
-             "results in $(BUILDDIR)/coverage/python.txt."
-
-.PHONY: xml
-xml:
-       $(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml
-       @echo
-       @echo "Build finished. The XML files are in $(BUILDDIR)/xml."
-
-.PHONY: pseudoxml
-pseudoxml:
-       $(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml
-       @echo
-       @echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml."
diff --git a/docs/make.bat b/docs/make.bat
deleted file mode 100644 (file)
index ed4cbfd..0000000
+++ /dev/null
@@ -1,272 +0,0 @@
-@ECHO OFF\r
-\r
-REM Command file for Sphinx documentation\r
-\r
-if "%SPHINXBUILD%" == "" (\r
-       set SPHINXBUILD=sphinx-build\r
-)\r
-set BUILDDIR=_build\r
-set ALLSPHINXOPTS=-d %BUILDDIR%/doctrees %SPHINXOPTS% .\r
-set I18NSPHINXOPTS=%SPHINXOPTS% .\r
-if NOT "%PAPER%" == "" (\r
-       set ALLSPHINXOPTS=-D latex_paper_size=%PAPER% %ALLSPHINXOPTS%\r
-       set I18NSPHINXOPTS=-D latex_paper_size=%PAPER% %I18NSPHINXOPTS%\r
-)\r
-\r
-if "%1" == "" goto help\r
-\r
-if "%1" == "help" (\r
-       :help\r
-       echo.Please use `make ^<target^>` where ^<target^> is one of\r
-       echo.  html       to make standalone HTML files\r
-       echo.  dirhtml    to make HTML files named index.html in directories\r
-       echo.  singlehtml to make a single large HTML file\r
-       echo.  pickle     to make pickle files\r
-       echo.  json       to make JSON files\r
-       echo.  htmlhelp   to make HTML files and a HTML help project\r
-       echo.  qthelp     to make HTML files and a qthelp project\r
-       echo.  devhelp    to make HTML files and a Devhelp project\r
-       echo.  epub       to make an epub\r
-       echo.  epub3      to make an epub3\r
-       echo.  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter\r
-       echo.  text       to make text files\r
-       echo.  man        to make manual pages\r
-       echo.  texinfo    to make Texinfo files\r
-       echo.  gettext    to make PO message catalogs\r
-       echo.  changes    to make an overview over all changed/added/deprecated items\r
-       echo.  xml        to make Docutils-native XML files\r
-       echo.  pseudoxml  to make pseudoxml-XML files for display purposes\r
-       echo.  linkcheck  to check all external links for integrity\r
-       echo.  doctest    to run all doctests embedded in the documentation if enabled\r
-       echo.  coverage   to run coverage check of the documentation if enabled\r
-       goto end\r
-)\r
-\r
-if "%1" == "clean" (\r
-       for /d %%i in (%BUILDDIR%\*) do rmdir /q /s %%i\r
-       del /q /s %BUILDDIR%\*\r
-       goto end\r
-)\r
-\r
-\r
-REM Check if sphinx-build is available and fallback to Python version if any\r
-%SPHINXBUILD% 1>NUL 2>NUL\r
-if errorlevel 9009 goto sphinx_python\r
-goto sphinx_ok\r
-\r
-:sphinx_python\r
-\r
-set SPHINXBUILD=python -m sphinx.__init__\r
-%SPHINXBUILD% 2> nul\r
-if errorlevel 9009 (\r
-       echo.\r
-       echo.The 'sphinx-build' command was not found. Make sure you have Sphinx\r
-       echo.installed, then set the SPHINXBUILD environment variable to point\r
-       echo.to the full path of the 'sphinx-build' executable. Alternatively you\r
-       echo.may add the Sphinx directory to PATH.\r
-       echo.\r
-       echo.If you don't have Sphinx installed, grab it from\r
-       echo.http://sphinx-doc.org/\r
-       exit /b 1\r
-)\r
-\r
-:sphinx_ok\r
-\r
-\r
-if "%1" == "html" (\r
-       %SPHINXBUILD% -b html %ALLSPHINXOPTS% %BUILDDIR%/html\r
-       if errorlevel 1 exit /b 1\r
-       echo.\r
-       echo.Build finished. The HTML pages are in %BUILDDIR%/html.\r
-       goto end\r
-)\r
-\r
-if "%1" == "dirhtml" (\r
-       %SPHINXBUILD% -b dirhtml %ALLSPHINXOPTS% %BUILDDIR%/dirhtml\r
-       if errorlevel 1 exit /b 1\r
-       echo.\r
-       echo.Build finished. The HTML pages are in %BUILDDIR%/dirhtml.\r
-       goto end\r
-)\r
-\r
-if "%1" == "singlehtml" (\r
-       %SPHINXBUILD% -b singlehtml %ALLSPHINXOPTS% %BUILDDIR%/singlehtml\r
-       if errorlevel 1 exit /b 1\r
-       echo.\r
-       echo.Build finished. The HTML pages are in %BUILDDIR%/singlehtml.\r
-       goto end\r
-)\r
-\r
-if "%1" == "pickle" (\r
-       %SPHINXBUILD% -b pickle %ALLSPHINXOPTS% %BUILDDIR%/pickle\r
-       if errorlevel 1 exit /b 1\r
-       echo.\r
-       echo.Build finished; now you can process the pickle files.\r
-       goto end\r
-)\r
-\r
-if "%1" == "json" (\r
-       %SPHINXBUILD% -b json %ALLSPHINXOPTS% %BUILDDIR%/json\r
-       if errorlevel 1 exit /b 1\r
-       echo.\r
-       echo.Build finished; now you can process the JSON files.\r
-       goto end\r
-)\r
-\r
-if "%1" == "htmlhelp" (\r
-       %SPHINXBUILD% -b htmlhelp %ALLSPHINXOPTS% %BUILDDIR%/htmlhelp\r
-       if errorlevel 1 exit /b 1\r
-       echo.\r
-       echo.Build finished; now you can run HTML Help Workshop with the ^\r
-.hhp project file in %BUILDDIR%/htmlhelp.\r
-       goto end\r
-)\r
-\r
-if "%1" == "qthelp" (\r
-       %SPHINXBUILD% -b qthelp %ALLSPHINXOPTS% %BUILDDIR%/qthelp\r
-       if errorlevel 1 exit /b 1\r
-       echo.\r
-       echo.Build finished; now you can run "qcollectiongenerator" with the ^\r
-.qhcp project file in %BUILDDIR%/qthelp, like this:\r
-       echo.^> qcollectiongenerator %BUILDDIR%\qthelp\OpenDaylightRelEngBuilder.qhcp\r
-       echo.To view the help file:\r
-       echo.^> assistant -collectionFile %BUILDDIR%\qthelp\OpenDaylightRelEngBuilder.ghc\r
-       goto end\r
-)\r
-\r
-if "%1" == "devhelp" (\r
-       %SPHINXBUILD% -b devhelp %ALLSPHINXOPTS% %BUILDDIR%/devhelp\r
-       if errorlevel 1 exit /b 1\r
-       echo.\r
-       echo.Build finished.\r
-       goto end\r
-)\r
-\r
-if "%1" == "epub" (\r
-       %SPHINXBUILD% -b epub %ALLSPHINXOPTS% %BUILDDIR%/epub\r
-       if errorlevel 1 exit /b 1\r
-       echo.\r
-       echo.Build finished. The epub file is in %BUILDDIR%/epub.\r
-       goto end\r
-)\r
-\r
-if "%1" == "epub3" (\r
-       %SPHINXBUILD% -b epub3 %ALLSPHINXOPTS% %BUILDDIR%/epub3\r
-       if errorlevel 1 exit /b 1\r
-       echo.\r
-       echo.Build finished. The epub3 file is in %BUILDDIR%/epub3.\r
-       goto end\r
-)\r
-\r
-if "%1" == "latex" (\r
-       %SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex\r
-       if errorlevel 1 exit /b 1\r
-       echo.\r
-       echo.Build finished; the LaTeX files are in %BUILDDIR%/latex.\r
-       goto end\r
-)\r
-\r
-if "%1" == "latexpdf" (\r
-       %SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex\r
-       cd %BUILDDIR%/latex\r
-       make all-pdf\r
-       cd %~dp0\r
-       echo.\r
-       echo.Build finished; the PDF files are in %BUILDDIR%/latex.\r
-       goto end\r
-)\r
-\r
-if "%1" == "latexpdfja" (\r
-       %SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex\r
-       cd %BUILDDIR%/latex\r
-       make all-pdf-ja\r
-       cd %~dp0\r
-       echo.\r
-       echo.Build finished; the PDF files are in %BUILDDIR%/latex.\r
-       goto end\r
-)\r
-\r
-if "%1" == "text" (\r
-       %SPHINXBUILD% -b text %ALLSPHINXOPTS% %BUILDDIR%/text\r
-       if errorlevel 1 exit /b 1\r
-       echo.\r
-       echo.Build finished. The text files are in %BUILDDIR%/text.\r
-       goto end\r
-)\r
-\r
-if "%1" == "man" (\r
-       %SPHINXBUILD% -b man %ALLSPHINXOPTS% %BUILDDIR%/man\r
-       if errorlevel 1 exit /b 1\r
-       echo.\r
-       echo.Build finished. The manual pages are in %BUILDDIR%/man.\r
-       goto end\r
-)\r
-\r
-if "%1" == "texinfo" (\r
-       %SPHINXBUILD% -b texinfo %ALLSPHINXOPTS% %BUILDDIR%/texinfo\r
-       if errorlevel 1 exit /b 1\r
-       echo.\r
-       echo.Build finished. The Texinfo files are in %BUILDDIR%/texinfo.\r
-       goto end\r
-)\r
-\r
-if "%1" == "gettext" (\r
-       %SPHINXBUILD% -b gettext %I18NSPHINXOPTS% %BUILDDIR%/locale\r
-       if errorlevel 1 exit /b 1\r
-       echo.\r
-       echo.Build finished. The message catalogs are in %BUILDDIR%/locale.\r
-       goto end\r
-)\r
-\r
-if "%1" == "changes" (\r
-       %SPHINXBUILD% -b changes %ALLSPHINXOPTS% %BUILDDIR%/changes\r
-       if errorlevel 1 exit /b 1\r
-       echo.\r
-       echo.The overview file is in %BUILDDIR%/changes.\r
-       goto end\r
-)\r
-\r
-if "%1" == "linkcheck" (\r
-       %SPHINXBUILD% -b linkcheck %ALLSPHINXOPTS% %BUILDDIR%/linkcheck\r
-       if errorlevel 1 exit /b 1\r
-       echo.\r
-       echo.Link check complete; look for any errors in the above output ^\r
-or in %BUILDDIR%/linkcheck/output.txt.\r
-       goto end\r
-)\r
-\r
-if "%1" == "doctest" (\r
-       %SPHINXBUILD% -b doctest %ALLSPHINXOPTS% %BUILDDIR%/doctest\r
-       if errorlevel 1 exit /b 1\r
-       echo.\r
-       echo.Testing of doctests in the sources finished, look at the ^\r
-results in %BUILDDIR%/doctest/output.txt.\r
-       goto end\r
-)\r
-\r
-if "%1" == "coverage" (\r
-       %SPHINXBUILD% -b coverage %ALLSPHINXOPTS% %BUILDDIR%/coverage\r
-       if errorlevel 1 exit /b 1\r
-       echo.\r
-       echo.Testing of coverage in the sources finished, look at the ^\r
-results in %BUILDDIR%/coverage/python.txt.\r
-       goto end\r
-)\r
-\r
-if "%1" == "xml" (\r
-       %SPHINXBUILD% -b xml %ALLSPHINXOPTS% %BUILDDIR%/xml\r
-       if errorlevel 1 exit /b 1\r
-       echo.\r
-       echo.Build finished. The XML files are in %BUILDDIR%/xml.\r
-       goto end\r
-)\r
-\r
-if "%1" == "pseudoxml" (\r
-       %SPHINXBUILD% -b pseudoxml %ALLSPHINXOPTS% %BUILDDIR%/pseudoxml\r
-       if errorlevel 1 exit /b 1\r
-       echo.\r
-       echo.Build finished. The pseudo-XML files are in %BUILDDIR%/pseudoxml.\r
-       goto end\r
-)\r
-\r
-:end\r