${DUMPFLOWS} dpctl dump-flows -O OpenFlow13
${index} 7
@{FLOWELMENTS} nw_src=10.0.0.1 nw_dst=10.0.0.3 actions=drop
+@{BRIDGE1_DATAFLOW} "reason":"PORTMAPPED" "path":{"tenant":"Tenant1","bridge":"vBridge1","interface":"if2"}
+@{BRIDGE2_DATAFLOW} "reason":"PORTMAPPED" "path":{"tenant":"Tenant1","bridge":"vBridge2","interface":"if3"}
${vlanmap_bridge1} {"vlan": "200"}
${vlanmap_bridge2} {"vlan": "300"}
+@{VLANMAP_BRIDGE1_DATAFLOW} "reason":"VLANMAPPED" "path":{"tenant":"Tenant1","bridge":"vBridge1_vlan"}
+@{VLANMAP_BRIDGE2_DATAFLOW} "reason":"VLANMAPPED" "path":{"tenant":"Tenant1","bridge":"vBridge2_vlan"}
${pathpolicy_topo} sudo mn --controller=remote,ip=${CONTROLLER} --custom topo-3sw-2host_multipath.py --topo pathpolicytopo --switch ovsk,protocols=OpenFlow13
@{PATHMAP_ATTR} "index":"1" "condition":"flowcond_path" "policy":"1"
${policy_id} 1
${resp}= RequestsLibrary.Put session ${REST_CONTEXT_VTNS}/${vtn_name}/vbridges/${vBridge_name}/interfaces/${interface_name}/portmap data=${json_data} headers=${HEADERS}
Should Be Equal As Strings ${resp.status_code} 200
+Verify Data Flows
+ [Arguments] ${vtn_name} ${vBridge_name}
+ [Documentation] Verify the reason and physical data flows for the specified vtn and vbridge
+ ${resp}= RequestsLibrary.Get session ${REST_CONTEXT_VTNS}/${vtn_name}/flows/detail
+ Run Keyword If '${vBridge_name}' == 'vBridge1' DataFlowsForBridge ${resp} @{BRIDGE1_DATAFLOW}
+ ... ELSE IF '${vBridge_name}' == 'vBridge2' DataFlowsForBridge ${resp} @{BRIDGE2_DATAFLOW}
+ ... ELSE IF '${vBridge_name}' == 'vBridge1_vlan' DataFlowsForBridge ${resp} @{VLANMAP_BRIDGE1_DATAFLOW}
+ ... ELSE DataFlowsForBridge ${resp} @{VLANMAP_BRIDGE2_DATAFLOW}
+
+DataFlowsForBridge
+ [Documentation] Verify whether the required attributes exists.
+ [Arguments] ${resp} @{BRIDGE_DATAFLOW}
+ : FOR ${dataflowElement} IN @{BRIDGE_DATAFLOW}
+ \ should Contain ${resp.content} ${dataflowElement}
+
Add a pathmap
[Arguments] ${pathmap_data}
[Documentation] Create a pathmap for a vtn
--- /dev/null
+*** Settings ***
+Documentation Test suite for VTN Manager Data Flow using OF13
+Suite Setup Start SuiteVtnMaTest
+Suite Teardown Stop SuiteVtnMaTest
+Resource ../../../libraries/VtnMaKeywords.robot
+
+*** Test Cases ***
+Check if switch1 detected
+ [Documentation] Check if openflow:1 is detected
+ BuiltIn.Wait_Until_Keyword_Succeeds 12 3 Fetch vtn switch inventory openflow:1
+
+Check if switch2 detected
+ [Documentation] Check if openflow:2 is detected
+ BuiltIn.Wait_Until_Keyword_Succeeds 3 1 Fetch vtn switch inventory openflow:2
+
+Check if switch3 detected
+ [Documentation] Check if openflow:3 is detected
+ BuiltIn.Wait_Until_Keyword_Succeeds 3 1 Fetch vtn switch inventory openflow:3
+
+Add a vtn Tenant1
+ [Documentation] Add a vtn Tenant1
+ Add a vtn Tenant1 {"idleTimeout": "200","hardTimeout": "600","description": "Virtual Tenant1 for Hackfest network"}
+
+Add a vBridge vBridge1
+ [Documentation] Add a vBridge vBridge1 in vtn Tenant1
+ Add a vBridge Tenant1 vBridge1 {"ageInterval": "300","description": "vBridge1 for Tenant1"}
+
+Add a interface If1
+ [Documentation] Add a interface if1 into vBridge vBridge1
+ Add a interface Tenant1 vBridge1 if1 {"enabled": "true","description": "Interface1 for vBridge1 for Tenant1"}
+
+Add a interface if2
+ [Documentation] Add a interface if2 into vBridge vBridge1
+ Add a interface Tenant1 vBridge1 if2 {"enabled": "true","description": "Interface2 for vBridge1 for Tenant1"}
+
+Add a portmap for interface if1
+ [Documentation] Create a portmap on Interface if1 of vBridge1
+ ${node} Create Dictionary type=OF id=00:00:00:00:00:00:00:02
+ ${port} Create Dictionary name=s2-eth1
+ ${portmap_data} Create Dictionary node=${node} port=${port}
+ Add a portmap Tenant1 vBridge1 if1 ${portmap_data}
+
+Add a portmap for interface if2
+ [Documentation] Create a portmap on Interface if2 of vBridge1
+ ${node} Create Dictionary type=OF id=00:00:00:00:00:00:00:03
+ ${port} Create Dictionary name=s3-eth1
+ ${portmap_data} Create Dictionary node=${node} port=${port}
+ Add a portmap Tenant1 vBridge1 if2 ${portmap_data}
+
+Ping h1 to h3
+ [Documentation] Ping h1 to h3, verify no packet loss
+ Mininet Ping Should Succeed h1 h3
+
+Verify data flow details For vBridge1
+ [Documentation] Verify the data flows for the specified tenant and bridge
+ Verify Data Flows Tenant1 vBridge1
+
+Add a vBridge vBridge2
+ [Documentation] Add a vBridge vBridge2 in vtn Tenant1
+ Add a vBridge Tenant1 vBridge2 {}
+
+Add a interface If3
+ [Documentation] Add a interface if3 into vBrdige vBridge1
+ Add a interface Tenant1 vBridge2 if3 {}
+
+Add a interface if4
+ [Documentation] Add a interface if4 into vBrdige vBridge1
+ Add a interface Tenant1 vBridge2 if4 {}
+
+Add a portmap for interface if3
+ [Documentation] Create a portmap on Interface if3 of vBridge1
+ ${node} Create Dictionary type=OF id=00:00:00:00:00:00:00:02
+ ${port} Create Dictionary name=s2-eth2
+ ${portmap_data} Create Dictionary node=${node} port=${port}
+ Add a portmap Tenant1 vBridge2 if3 ${portmap_data}
+
+Add a portmap for interface if4
+ [Documentation] Create a portmap on Interface if4 of vBridge1
+ ${node} Create Dictionary type=OF id=00:00:00:00:00:00:00:03
+ ${port} Create Dictionary name=s3-eth2
+ ${portmap_data} Create Dictionary node=${node} port=${port}
+ Add a portmap Tenant1 vBridge2 if4 ${portmap_data}
+
+Ping h2 to h4
+ [Documentation] Ping h2 to h4, verify no packet loss
+ Mininet Ping Should Succeed h2 h4
+
+Verify data flow details for vBridge2
+ [Documentation] Verify the data flows for the specified tenant and bridge
+ Verify Data Flows Tenant1 vBridge2
+
+Verify FlowMacAddress
+ [Documentation] Checking Flows on switch
+ [Tags] Switch
+ Verify FlowMacAddress h2 h4
+
+Remove Portmap for If1
+ [Documentation] Remove portmap for the interface If1
+ ${node} Create Dictionary type=OF id=00:00:00:00:00:00:00:02
+ ${port} Create Dictionary name=s2-eth1
+ ${portmap_data} Create Dictionary node=${node} port=${port}
+ Remove a portmap Tenant1 vBridge1 if1 ${portmap_data}
+
+Verify RemovedFlowMacAddress
+ [Documentation] flows will be deleted after the port map is removed
+ Verify RemovedFlowMacAddress h1 h3
+
+Delete a vtn Tenant1
+ [Documentation] Delete a vtn Tenant1
+ Delete a vtn Tenant1
--- /dev/null
+*** Settings ***
+Documentation Test suite for VTN Manager Data Flows using OF13
+Suite Setup Start SuiteVtnMaTest
+Suite Teardown Stop SuiteVtnMaTest
+Resource ../../../libraries/VtnMaKeywords.robot
+
+*** Test Cases ***
+Start topology
+ [Documentation] Add a vlan topology
+ Start vlan_topo
+
+Check if switch1 detected
+ [Documentation] Check if openflow:1 is detected
+ BuiltIn.Wait_Until_Keyword_Succeeds 12 3 Fetch vtn switch inventory openflow:1
+
+Check if switch2 detected
+ [Documentation] Check if openflow:2 is detected
+ BuiltIn.Wait_Until_Keyword_Succeeds 3 1 Fetch vtn switch inventory openflow:2
+
+Check if switch3 detected
+ [Documentation] Check if openflow:3 is detected
+ BuiltIn.Wait_Until_Keyword_Succeeds 3 1 Fetch vtn switch inventory openflow:3
+
+Add a vtn Tenant1
+ [Documentation] Add a vtn Tenant1
+ Add a vtn Tenant1 {}
+
+Add a vBridge vBridge1_vlan
+ [Documentation] Add a vBridge vBridge1_vlan in vtn Tenant1
+ Add a vBridge Tenant1 vBridge1_vlan {}
+
+Add a vlanmap for vBridge1_vlan
+ [Documentation] Add a Vlanmap for vBridge1_vlan in vtn Tenant1
+ Add a vlanmap Tenant1 vBridge1_vlan ${vlanmap_bridge1}
+
+Add a vBridge vBridge2_vlan
+ [Documentation] Add a vBridge vBridge2_vlan in vtn Tenant1
+ Add a vBridge Tenant1 vBridge2_vlan {}
+
+Add a vlanmap for vBridge2_vlan
+ [Documentation] Add a Vlanmap for vBridge2_vlan in vtn Tenant1
+ Add a vlanmap Tenant1 vBridge2_vlan ${vlanmap_bridge2}
+
+Get vlanflow h1 h3
+ [Documentation] ping h1 to h3
+ Wait Until Keyword Succeeds 10s 2s Mininet Ping Should Succeed h1 h3
+
+Get vlanflow h1 h5
+ [Documentation] ping h1 to h5
+ Wait Until Keyword Succeeds 10s 2s Mininet Ping Should Succeed h1 h5
+
+Verify data flow details for vlanmap vBridge1_vlan
+ [Documentation] Verify the data flows for the specified tenant and vBridge1_vlan
+ Verify Data Flows Tenant1 vBridge1_vlan
+
+Get vlanflow h2 h4
+ [Documentation] ping h2 to h4
+ Wait Until Keyword Succeeds 10s 2s Mininet Ping Should Succeed h2 h4
+
+Get vlanflow h2 h6
+ [Documentation] ping h2 to h6
+ Wait Until Keyword Succeeds 10s 2s Mininet Ping Should Succeed h2 h6
+
+Verify data flow details for vlanmap vBridge2_vlan
+ [Documentation] Verify the data flows for the specified tenant and vBridge2_vlan
+ Verify Data Flows Tenant1 vBridge2_vlan
+
+Get vlanflow h2 h5
+ [Documentation] ping h2 to h5
+ Mininet Ping Should Not Succeed h2 h5
+
+Delete a vtn Tenant1
+ [Documentation] Delete a vtn Tenant1
+ Delete a vtn Tenant1
Code Review / integration / test.git / commitdiff