BFD_TC02 Verify that BFD tunnel monitoring interval is set with appropriate default value i.e.,1000
[Documentation] This will verify BFD tunnel monitoring default interval
${output}= Issue Command On Karaf Console ${TEP_SHOW}
- Log ${output}
Should Contain ${output} ${DEFAULT_MONITORING_INTERVAL}
Wait Until Keyword Succeeds 10s 2s Verify Config Ietf Interface Output ${INTERFACE_DS_MONI_TRUE} ${INTERFACE_DS_MONI_INT_1000} ${TUNNEL_MONI_PROTO}
BFD_TC05 Verify BFD tunnel monitoring interval can be changed.
[Documentation] Verify BFD tunnel monitoring interval can be changed.
- Log "Value of BFD monitoring interval before updating with new value"
${oper_int} RequestsLibrary.Get Request session ${OPERATIONAL_API}/itm-config:tunnel-monitor-interval/
${respjson} RequestsLibrary.To Json ${oper_int.content} pretty_print=True
Log ${respjson}
- Log "Value of BFD monitoring interval is getting updated"
${oper_int} RequestsLibrary.Put Request session ${CONFIG_API}/itm-config:tunnel-monitor-interval/ data=${INTERVAL_5000}
${Bfd_updated_value}= Create List 5000
Wait Until Keyword Succeeds 30s 10s Check For Elements At Uri ${OPERATIONAL_API}/itm-config:tunnel-monitor-interval/ ${Bfd_updated_value}
BFD_TC06 Verify that the tunnel state goes to UNKNOWN when DPN is disconnected
[Documentation] Verify that the tunnel state goes to UNKNOWN when DPN is disconnected
- ${output}= Issue Command On Karaf Console ${TEP_SHOW}
- Log ${output}
- ${output}= Issue Command On Karaf Console ${TEP_SHOW_STATE}
- Log ${output}
+ Issue Command On Karaf Console ${TEP_SHOW}
+ Issue Command On Karaf Console ${TEP_SHOW_STATE}
SSHLibrary.Switch Connection ${conn_id_1}
Execute Command sudo ovs-vsctl del-controller BR1
SSHLibrary.Switch Connection ${conn_id_2}
Execute Command sudo ovs-vsctl del-controller BR2
- ${output}= Issue Command On Karaf Console ${TEP_SHOW}
- Log ${output}
- ${output}= Issue Command On Karaf Console ${TEP_SHOW_STATE}
- Log ${output}
+ Issue Command On Karaf Console ${TEP_SHOW}
+ Issue Command On Karaf Console ${TEP_SHOW_STATE}
Wait Until Keyword Succeeds 10s 1s Verify Tunnel Status as UNKNOWN
Wait Until Keyword Succeeds 10s 2s Verify Config Ietf Interface Output ${INTERFACE_DS_MONI_TRUE} ${INTERFACE_DS_MONI_INT_5000} ${TUNNEL_MONI_PROTO}
SSHLibrary.Switch Connection ${conn_id_1}
SSHLibrary.Switch Connection ${conn_id_2}
Execute Command sudo ovs-vsctl set-controller BR2 tcp:${ODL_SYSTEM_IP}:${ODL_OF_PORT}
Log "After connecting CSS with controller"
- ${output}= Issue Command On Karaf Console ${TEP_SHOW}
- Log ${output}
- ${output}= Issue Command On Karaf Console ${TEP_SHOW_STATE}
- Log ${output}
+ Issue Command On Karaf Console ${TEP_SHOW}
+ Issue Command On Karaf Console ${TEP_SHOW_STATE}
Wait Until Keyword Succeeds 10s 1s Verify Tunnel Status as UP
Wait Until Keyword Succeeds 10s 2s Verify Config Ietf Interface Output ${INTERFACE_DS_MONI_TRUE} ${INTERFACE_DS_MONI_INT_5000} ${TUNNEL_MONI_PROTO}
Should Be Equal As Strings ${resp.status_code} 201
Wait Until Keyword Succeeds 10s 2s Verify Tunnel Monitoring Params ${TUNNEL_MONI_PARAMS_FALSE}
${output}= Issue Command On Karaf Console ${TEP_SHOW}
- Log ${output}
Should Contain ${output} ${TUNNEL_MONITOR_OFF}
Wait Until Keyword Succeeds 10s 2s Verify Config Ietf Interface Output ${INTERFACE_DS_MONI_FALSE} ${INTERFACE_DS_MONI_INT_5000} ${TUNNEL_MONI_PROTO}
- Log "Verifying tunnel is UP after BFD is disabled"
Wait Until Keyword Succeeds 10s 1s Verify Tunnel Status as UP
- Log "Enabling tunnel monitoring once again"
${resp} RequestsLibrary.Put Request session ${CONFIG_API}/itm-config:tunnel-monitor-params/ data=${ENABLE_MONITORING}
Should Be Equal As Strings ${resp.status_code} 200
Wait Until Keyword Succeeds 10s 2s Verify Tunnel Monitoring Params ${TUNNEL_MONI_PARAMS_TRUE}
Genius.Create Vteps ${Dpn_id_1} ${Dpn_id_2} ${TOOLS_SYSTEM_IP} ${TOOLS_SYSTEM_2_IP} ${vlan} ${gateway-ip}
Wait Until Keyword Succeeds 40 10 Get ITM ${itm_created[0]} ${subnet} ${vlan}
... ${Dpn_id_1} ${TOOLS_SYSTEM_IP} ${Dpn_id_2} ${TOOLS_SYSTEM_2_IP}
- ${type} set variable odl-interface:tunnel-type-vxlan
+ ${type} Set Variable odl-interface:tunnel-type-vxlan
${tunnel-1} Wait Until Keyword Succeeds 40 20 Get Tunnel ${Dpn_id_1} ${Dpn_id_2}
... ${type}
- Set Global Variable ${tunnel-1}
${tunnel-2} Wait Until Keyword Succeeds 40 20 Get Tunnel ${Dpn_id_2} ${Dpn_id_1}
... ${type}
- Set Global Variable ${tunnel-2}
${tunnel-type}= Set Variable type: vxlan
Wait Until Keyword Succeeds 40 5 Get Data From URI session ${CONFIG_API}/itm-state:dpn-endpoints/DPN-TEPs-info/${Dpn_id_1}/
Wait Until Keyword Succeeds 40 5 Get Data From URI session ${CONFIG_API}/itm-state:dpn-endpoints/DPN-TEPs-info/${Dpn_id_2}/
- Log >>>>OVS Validation in Switch 1 for Tunnel Created<<<<<
Wait Until Keyword Succeeds 40 10 Genius.Ovs Verification For 2 Dpn ${conn_id_1} ${TOOLS_SYSTEM_IP} ${TOOLS_SYSTEM_2_IP}
... ${tunnel-1} ${tunnel-type}
- Log >>>>OVS Validation in Switch 2 for Tunnel Created<<<<<
Wait Until Keyword Succeeds 40 10 Genius.Ovs Verification For 2 Dpn ${conn_id_2} ${TOOLS_SYSTEM_2_IP} ${TOOLS_SYSTEM_IP}
... ${tunnel-2} ${tunnel-type}
- Log >>>> Getting Network Topology Operational <<<<<<
${resp} Wait Until Keyword Succeeds 40 10 Get Network Topology with Tunnel ${Bridge-1} ${Bridge-2}
... ${tunnel-1} ${tunnel-2} ${OPERATIONAL_TOPO_API}
- Log >>>>Validating Interface 1 & 2 states<<<<
${return} Validate interface state ${tunnel-1} ${Dpn_id_1} ${tunnel-2} ${Dpn_id_2}
log ${return}
${lower-layer-if-1} Get from List ${return} 0
${port-num-1} Get From List ${return} 1
${lower-layer-if-2} Get from List ${return} 2
${port-num-2} Get From List ${return} 3
- Log >>>>>Verify Oper data base of Interface state<<<<<
${resp} RequestsLibrary.Get Request session ${OPERATIONAL_API}/ietf-interfaces:interfaces-state/
${respjson} RequestsLibrary.To Json ${resp.content} pretty_print=True
Log ${respjson}
Should Be Equal As Strings ${resp.status_code} 200
Should Contain ${resp.content} ${Dpn_id_1} ${tunnel-1}
Should Contain ${resp.content} ${Dpn_id_2} ${tunnel-2}
- Log >>>>> Checking Entry in table 0 on OVS 1<<<<<
- ${check-3} Wait Until Keyword Succeeds 40 10 Genius.Check Table0 Entry For 2 Dpn ${conn_id_1} ${Bridge-1}
- ... ${port-num-1}
- Log >>>>> Checking Entry in table 0 on OVS 2<<<<<
- ${check-4} Wait Until Keyword Succeeds 40 10 Genius.Check Table0 Entry For 2 Dpn ${conn_id_2} ${Bridge-2}
- ... ${port-num-2}
+ Wait Until Keyword Succeeds 40 10 Genius.Check Table0 Entry For 2 Dpn ${conn_id_1} ${Bridge-1} ${port-num-1}
+ Wait Until Keyword Succeeds 40 10 Genius.Check Table0 Entry For 2 Dpn ${conn_id_2} ${Bridge-2} ${port-num-2}
${resp} RequestsLibrary.Get Request session ${OPERATIONAL_API}/opendaylight-inventory:nodes/
${respjson} RequestsLibrary.To Json ${resp.content} pretty_print=True
Log ${respjson}
Delete and Verify VTEP -No Vlan
[Documentation] This Delete testcase , deletes the ITM tunnel created between 2 dpns.
+ ${Dpn_id_1} Genius.Get Dpn Ids ${conn_id_1}
+ ${Dpn_id_2} Genius.Get Dpn Ids ${conn_id_2}
+ ${type} Set Variable odl-interface:tunnel-type-vxlan
+ ${tunnel-1} Get_Tunnel ${Dpn_id_1} ${Dpn_id_2} ${type}
+ ${tunnel-2} Get_Tunnel ${Dpn_id_2} ${Dpn_id_1} ${type}
Remove All Elements At URI And Verify ${CONFIG_API}/itm:transport-zones/transport-zone/${itm_created[0]}/
${resp} RequestsLibrary.Get Request session ${OPERATIONAL_API}/itm-state:tunnels_state/
Should Not Contain ${resp} ${tunnel-1} ${tunnel-2}
- ${Ovs-del-1} Wait Until Keyword Succeeds 40 10 Genius.Check Tunnel Delete On OVS ${conn_id_1} ${tunnel-1}
- ${Ovs-del-2} Wait Until Keyword Succeeds 40 10 Genius.Check Tunnel Delete On OVS ${conn_id_2} ${tunnel-2}
+ Wait Until Keyword Succeeds 40 10 Genius.Check Tunnel Delete On OVS ${conn_id_1} ${tunnel-1}
+ Wait Until Keyword Succeeds 40 10 Genius.Check Tunnel Delete On OVS ${conn_id_2} ${tunnel-2}
Create and Verify VTEP IPv6 - No Vlan
[Documentation] This testcase creates a Internal Transport Manager - ITM tunnel between 2 DPNs without VLAN and Gateway configured in Json.
Create Vteps IPv6 ${Dpn_id_1} ${Dpn_id_2} ${TOOLS_SYSTEM_IP} ${TOOLS_SYSTEM_2_IP} ${vlan} ${gateway-ip}
Wait Until Keyword Succeeds 40 10 Get ITM ${itm_created[0]} ${subnet} ${vlan}
... ${Dpn_id_1} ${TOOLS_SYSTEM_IP} ${Dpn_id_2} ${TOOLS_SYSTEM_2_IP}
- ${type} set variable odl-interface:tunnel-type-vxlan
+ ${type} Set Variable odl-interface:tunnel-type-vxlan
${tunnel-1} Wait Until Keyword Succeeds 40 10 Get Tunnel ${Dpn_id_1} ${Dpn_id_2}
... ${type}
- Set Global Variable ${tunnel-1}
${tunnel-2} Wait Until Keyword Succeeds 40 10 Get Tunnel ${Dpn_id_2} ${Dpn_id_1}
... ${type}
- Set Global Variable ${tunnel-2}
${tunnel-type}= Set Variable type: vxlan
Wait Until Keyword Succeeds 40 5 Get Data From URI session ${CONFIG_API}/itm-state:dpn-endpoints/DPN-TEPs-info/${Dpn_id_1}/ headers=${ACCEPT_XML}
Wait Until Keyword Succeeds 40 5 Get Data From URI session ${CONFIG_API}/itm-state:dpn-endpoints/DPN-TEPs-info/${Dpn_id_2}/ headers=${ACCEPT_XML}
- Log >>>>OVS Validation in Switch 1 for Tunnel Created<<<<<
Wait Until Keyword Succeeds 40 10 Genius.Ovs Verification For 2 Dpn ${conn_id_1} ${TOOLS_SYSTEM_IP} ${TOOLS_SYSTEM_2_IP}
... ${tunnel-1} ${tunnel-type}
- Log >>>>OVS Validation in Switch 2 for Tunnel Created<<<<<
Wait Until Keyword Succeeds 40 10 Genius.Ovs Verification For 2 Dpn ${conn_id_2} ${TOOLS_SYSTEM_2_IP} ${TOOLS_SYSTEM_IP}
... ${tunnel-2} ${tunnel-type}
- Log >>>> Getting Network Topology Operational <<<<<<
${resp} Wait Until Keyword Succeeds 40 10 Get Network Topology with Tunnel ${Bridge-1} ${Bridge-2}
... ${tunnel-1} ${tunnel-2} ${OPERATIONAL_TOPO_API}
Delete and Verify VTEP IPv6 -No Vlan
[Documentation] This Delete testcase , deletes the ITM tunnel created between 2 dpns.
+ ${Dpn_id_1} Genius.Get Dpn Ids ${conn_id_1}
+ ${Dpn_id_2} Genius.Get Dpn Ids ${conn_id_2}
+ ${type} Set Variable odl-interface:tunnel-type-vxlan
+ ${tunnel-1} Get_Tunnel ${Dpn_id_1} ${Dpn_id_2} ${type}
+ ${tunnel-2} Get_Tunnel ${Dpn_id_2} ${Dpn_id_1} ${type}
Remove All Elements At URI And Verify ${CONFIG_API}/itm:transport-zones/transport-zone/${itm_created[0]}/
${resp} RequestsLibrary.Get Request session ${OPERATIONAL_API}/itm-state:tunnels_state/
Should Not Contain ${resp} ${tunnel-1} ${tunnel-2}
- ${Ovs-del-1} Wait Until Keyword Succeeds 40 10 Genius.Check Tunnel Delete On OVS ${conn_id_1} ${tunnel-1}
- ${Ovs-del-2} Wait Until Keyword Succeeds 40 10 Genius.Check Tunnel Delete On OVS ${conn_id_2} ${tunnel-2}
+ Wait Until Keyword Succeeds 40 10 Genius.Check Tunnel Delete On OVS ${conn_id_1} ${tunnel-1}
+ Wait Until Keyword Succeeds 40 10 Genius.Check Tunnel Delete On OVS ${conn_id_2} ${tunnel-2}
Create and Verify VTEP-Vlan
[Documentation] This testcase creates a Internal Transport Manager - ITM tunnel between 2 DPNs with VLAN and \ without Gateway configured in Json.
${get} Wait Until Keyword Succeeds 40 10 Get ITM ${itm_created[0]} ${subnet}
... ${vlan} ${Dpn_id_1} ${TOOLS_SYSTEM_IP} ${Dpn_id_2} ${TOOLS_SYSTEM_2_IP}
Log ${get}
- ${type} set variable odl-interface:tunnel-type-vxlan
- ${tunnel-3} Wait Until Keyword Succeeds 40 10 Get Tunnel ${Dpn_id_1} ${Dpn_id_2}
+ ${type} Set Variable odl-interface:tunnel-type-vxlan
+ ${tunnel-1} Wait Until Keyword Succeeds 40 10 Get Tunnel ${Dpn_id_1} ${Dpn_id_2}
... ${type}
- log ${tunnel-3}
- Set Global Variable ${tunnel-3}
- ${tunnel-4} Wait Until Keyword Succeeds 40 10 Get Tunnel ${Dpn_id_2} ${Dpn_id_1}
+ ${tunnel-2} Wait Until Keyword Succeeds 40 10 Get Tunnel ${Dpn_id_2} ${Dpn_id_1}
... ${type}
- log ${tunnel-4}
- Set Global Variable ${tunnel-4}
${tunnel-type}= Set Variable type: vxlan
Wait Until Keyword Succeeds 40 5 Get Data From URI session ${CONFIG_API}/itm-state:dpn-endpoints/DPN-TEPs-info/${Dpn_id_1}/
Wait Until Keyword Succeeds 40 5 Get Data From URI session ${CONFIG_API}/itm-state:dpn-endpoints/DPN-TEPs-info/${Dpn_id_2}/
- Log >>>>OVS Validation in Switch 1 for Tunnel Created<<<<<
Wait Until Keyword Succeeds 40 10 Genius.Ovs Verification For 2 Dpn ${conn_id_1} ${TOOLS_SYSTEM_IP} ${TOOLS_SYSTEM_2_IP}
- ... ${tunnel-3} ${tunnel-type}
- Log >>>>OVS Validation in Switch 2 for Tunnel Created<<<<<
+ ... ${tunnel-1} ${tunnel-type}
Wait Until Keyword Succeeds 40 10 Genius.Ovs Verification For 2 Dpn ${conn_id_2} ${TOOLS_SYSTEM_2_IP} ${TOOLS_SYSTEM_IP}
- ... ${tunnel-4} ${tunnel-type}
- Log >>>>> Checking Network opertional Topology <<<<<<
- ${url_2} set variable ${OPERATIONAL_API}/network-topology:network-topology/
- Wait Until Keyword Succeeds 40 10 Get Network Topology with Tunnel ${Bridge-1} ${Bridge-2} ${tunnel-3}
- ... ${tunnel-4} ${url_2}
- ${return} Validate interface state ${tunnel-3} ${Dpn_id_1} ${tunnel-4} ${Dpn_id_2}
+ ... ${tunnel-2} ${tunnel-type}
+ ${url_2} Set Variable ${OPERATIONAL_API}/network-topology:network-topology/
+ Wait Until Keyword Succeeds 40 10 Get Network Topology with Tunnel ${Bridge-1} ${Bridge-2} ${tunnel-1}
+ ... ${tunnel-2} ${url_2}
+ ${return} Validate interface state ${tunnel-1} ${Dpn_id_1} ${tunnel-2} ${Dpn_id_2}
log ${return}
${lower-layer-if-1} Get from List ${return} 0
${port-num-1} Get From List ${return} 1
${lower-layer-if-2} Get from List ${return} 2
${port-num-2} Get From List ${return} 3
- Log >>>>>Verify Oper data base of Interface state<<<<<
${resp} RequestsLibrary.Get Request session ${OPERATIONAL_API}/ietf-interfaces:interfaces-state/
${respjson} RequestsLibrary.To Json ${resp.content} pretty_print=True
Log ${respjson}
- Should Contain ${resp.content} ${Dpn_id_1} ${tunnel-3}
- Should Contain ${resp.content} ${Dpn_id_2} ${tunnel-4}
- Log >>>>> Checking Entry in table 0 on OVS 1<<<<<
+ Should Contain ${resp.content} ${Dpn_id_1} ${tunnel-1}
+ Should Contain ${resp.content} ${Dpn_id_2} ${tunnel-2}
Wait Until Keyword Succeeds 40 10 Genius.Check Table0 Entry For 2 Dpn ${conn_id_1} ${Bridge-1} ${port-num-1}
- Log >>>>> Checking Entry in table 0 on OVS \ 2<<<<<
Wait Until Keyword Succeeds 40 10 Genius.Check Table0 Entry For 2 Dpn ${conn_id_2} ${Bridge-2} ${port-num-2}
${resp} RequestsLibrary.Get Request session ${OPERATIONAL_API}/opendaylight-inventory:nodes/
${respjson} RequestsLibrary.To Json ${resp.content} pretty_print=True
Delete and Verify VTEP -Vlan
[Documentation] This Delete testcase , deletes the ITM tunnel created between 2 dpns.
+ ${Dpn_id_1} Genius.Get Dpn Ids ${conn_id_1}
+ ${Dpn_id_2} Genius.Get Dpn Ids ${conn_id_2}
+ ${type} Set Variable odl-interface:tunnel-type-vxlan
+ ${tunnel-1} Get_Tunnel ${Dpn_id_1} ${Dpn_id_2} ${type}
+ ${tunnel-2} Get_Tunnel ${Dpn_id_2} ${Dpn_id_1} ${type}
Remove All Elements At URI And Verify ${CONFIG_API}/itm:transport-zones/transport-zone/${itm_created[0]}/
- Wait Until Keyword Succeeds 40 10 Genius.Check ITM Tunnel State ${tunnel-3} ${tunnel-4}
- ${Ovs-del-1} Wait Until Keyword Succeeds 40 10 Genius.Check Tunnel Delete On OVS ${conn_id_1} ${tunnel-3}
- ${Ovs-del-2} Wait Until Keyword Succeeds 40 10 Genius.Check Tunnel Delete On OVS ${conn_id_2} ${tunnel-4}
+ Wait Until Keyword Succeeds 40 10 Genius.Check ITM Tunnel State ${tunnel-1} ${tunnel-2}
+ Wait Until Keyword Succeeds 40 10 Genius.Check Tunnel Delete On OVS ${conn_id_1} ${tunnel-1}
+ Wait Until Keyword Succeeds 40 10 Genius.Check Tunnel Delete On OVS ${conn_id_2} ${tunnel-2}
Create VTEP - Vlan and Gateway
[Documentation] This testcase creates a Internal Transport Manager - ITM tunnel between 2 DPNs with VLAN and Gateway configured in Json.
Genius.Create Vteps ${Dpn_id_1} ${Dpn_id_2} ${TOOLS_SYSTEM_IP} ${TOOLS_SYSTEM_2_IP} ${vlan} ${gateway-ip}
Wait Until Keyword Succeeds 40 10 Get ITM ${itm_created[0]} ${subnet} ${vlan}
... ${Dpn_id_1} ${TOOLS_SYSTEM_IP} ${Dpn_id_2} ${TOOLS_SYSTEM_2_IP}
- ${type} set variable odl-interface:tunnel-type-vxlan
- ${tunnel-5} Wait Until Keyword Succeeds 40 10 Get Tunnel ${Dpn_id_1} ${Dpn_id_2}
+ ${type} Set Variable odl-interface:tunnel-type-vxlan
+ ${tunnel-1} Wait Until Keyword Succeeds 40 10 Get Tunnel ${Dpn_id_1} ${Dpn_id_2}
... ${type}
- log ${tunnel-5}
- Set Global Variable ${tunnel-5}
- ${tunnel-6} Wait Until Keyword Succeeds 40 10 Get Tunnel ${Dpn_id_2} ${Dpn_id_1}
+ ${tunnel-2} Wait Until Keyword Succeeds 40 10 Get Tunnel ${Dpn_id_2} ${Dpn_id_1}
... ${type}
- log ${tunnel-6}
- Set Global Variable ${tunnel-6}
${tunnel-type}= Set Variable type: vxlan
Wait Until Keyword Succeeds 40 5 Get Data From URI session ${CONFIG_API}/itm-state:dpn-endpoints/DPN-TEPs-info/${Dpn_id_1}/
Wait Until Keyword Succeeds 40 5 Get Data From URI session ${CONFIG_API}/itm-state:dpn-endpoints/DPN-TEPs-info/${Dpn_id_2}/
- Log >>>>OVS Validation in Switch 1 for Tunnel Created<<<<<
- ${check-1} Wait Until Keyword Succeeds 40 10 Genius.Ovs Verification For 2 Dpn ${conn_id_1} ${TOOLS_SYSTEM_IP}
- ... ${TOOLS_SYSTEM_2_IP} ${tunnel-5} ${tunnel-type}
- Log ${check-1}
- ${check-2} Wait Until Keyword Succeeds 40 10 Genius.Ovs Verification For 2 Dpn ${conn_id_2} ${TOOLS_SYSTEM_2_IP}
- ... ${TOOLS_SYSTEM_IP} ${tunnel-6} ${tunnel-type}
- Log ${check-2}
+ Wait Until Keyword Succeeds 40 10 Genius.Ovs Verification For 2 Dpn ${conn_id_1} ${TOOLS_SYSTEM_IP} ${TOOLS_SYSTEM_2_IP}
+ ... ${tunnel-1} ${tunnel-type}
+ Wait Until Keyword Succeeds 40 10 Genius.Ovs Verification For 2 Dpn ${conn_id_2} ${TOOLS_SYSTEM_2_IP} ${TOOLS_SYSTEM_IP}
+ ... ${tunnel-2} ${tunnel-type}
${resp} Wait Until Keyword Succeeds 40 10 Get Network Topology with Tunnel ${Bridge-1} ${Bridge-2}
- ... ${tunnel-5} ${tunnel-6} ${OPERATIONAL_TOPO_API}
+ ... ${tunnel-1} ${tunnel-2} ${OPERATIONAL_TOPO_API}
Log ${resp}
- ${return} Validate interface state ${tunnel-5} ${Dpn_id_1} ${tunnel-6} ${Dpn_id_2}
+ ${return} Validate interface state ${tunnel-1} ${Dpn_id_1} ${tunnel-2} ${Dpn_id_2}
log ${return}
${lower-layer-if-1} Get from List ${return} 0
${port-num-1} Get From List ${return} 1
${resp} RequestsLibrary.Get Request session ${OPERATIONAL_API}/ietf-interfaces:interfaces-state/
${respjson} RequestsLibrary.To Json ${resp.content} pretty_print=True
Log ${respjson}
- Should Contain ${resp.content} ${Dpn_id_1} ${tunnel-5}
- Should Contain ${resp.content} ${Dpn_id_2} ${tunnel-6}
- ${check-3} Wait Until Keyword Succeeds 40 10 Genius.Check Table0 Entry For 2 Dpn ${conn_id_1} ${Bridge-1}
- ... ${port-num-1}
- Log ${check-3}
- ${check-4} Wait Until Keyword Succeeds 40 10 Genius.Check Table0 Entry For 2 Dpn ${conn_id_2} ${Bridge-2}
- ... ${port-num-2}
- Log ${check-4}
+ Should Contain ${resp.content} ${Dpn_id_1} ${tunnel-1}
+ Should Contain ${resp.content} ${Dpn_id_2} ${tunnel-2}
+ Wait Until Keyword Succeeds 40 10 Genius.Check Table0 Entry For 2 Dpn ${conn_id_1} ${Bridge-1} ${port-num-1}
+ Wait Until Keyword Succeeds 40 10 Genius.Check Table0 Entry For 2 Dpn ${conn_id_2} ${Bridge-2} ${port-num-2}
${resp} RequestsLibrary.Get Request session ${OPERATIONAL_API}/opendaylight-inventory:nodes/
${respjson} RequestsLibrary.To Json ${resp.content} pretty_print=True
Log ${respjson}
Delete VTEP -Vlan and gateway
[Documentation] This testcase deletes the ITM tunnel created between 2 dpns.
+ ${Dpn_id_1} Genius.Get Dpn Ids ${conn_id_1}
+ ${Dpn_id_2} Genius.Get Dpn Ids ${conn_id_2}
+ ${type} Set Variable odl-interface:tunnel-type-vxlan
+ ${tunnel-1} Get_Tunnel ${Dpn_id_1} ${Dpn_id_2} ${type}
+ ${tunnel-2} Get_Tunnel ${Dpn_id_2} ${Dpn_id_1} ${type}
Remove All Elements At URI And Verify ${CONFIG_API}/itm:transport-zones/transport-zone/${itm_created[0]}/
- Wait Until Keyword Succeeds 40 10 Genius.Check ITM Tunnel State ${tunnel-5} ${tunnel-6}
- ${Ovs-del-1} Wait Until Keyword Succeeds 40 10 Genius.Check Tunnel Delete On OVS ${conn_id_1} ${tunnel-5}
- ${Ovs-del-2} Wait Until Keyword Succeeds 40 10 Genius.Check Tunnel Delete On OVS ${conn_id_2} ${tunnel-6}
+ Wait Until Keyword Succeeds 40 10 Genius.Check ITM Tunnel State ${tunnel-1} ${tunnel-2}
+ Wait Until Keyword Succeeds 40 10 Genius.Check Tunnel Delete On OVS ${conn_id_1} ${tunnel-1}
+ Wait Until Keyword Succeeds 40 10 Genius.Check Tunnel Delete On OVS ${conn_id_2} ${tunnel-2}
*** Keywords ***
Create Vteps IPv6
Verify Data Base after Delete
[Arguments] ${Dpn_id_1} ${Dpn_id_2} ${tunnel-1} ${tunnel-2}
[Documentation] Verifies the config database after the Tunnel deletion is done.
- ${type} set variable odl-interface:tunnel-type-vxlan
+ ${type} Set Variable odl-interface:tunnel-type-vxlan
No Content From URI session ${CONFIG_API}/itm-state:tunnel-list/internal-tunnel/${Dpn_id_1}/${Dpn_id_2}/${type}/
No Content From URI session ${CONFIG_API}/itm-state:tunnel-list/internal-tunnel/${Dpn_id_2}/${Dpn_id_1}/${type}/
No Content From URI session ${CONFIG_API}/itm-state:dpn-endpoints/DPN-TEPs-info/${Dpn_id_1}/
${resp_8} Wait Until Keyword Succeeds 40 10 Get Network Topology without Tunnel ${CONFIG_TOPO_API} ${tunnel-1}
... ${tunnel-2}
Log ${resp_8}
- ${Ovs-del-1} Wait Until Keyword Succeeds 40 10 check-Tunnel-delete-on-ovs ${conn_id_1} ${tunnel-1}
- Log ${Ovs-del-1}
- ${Ovs-del-2} Wait Until Keyword Succeeds 40 10 check-Tunnel-delete-on-ovs ${conn_id_2} ${tunnel-2}
- Log ${Ovs-del-2}
- Log >>>>>>> Getting Network Topology Config without Tunnels<<<<<<<
+ Wait Until Keyword Succeeds 40 10 check-Tunnel-delete-on-ovs ${conn_id_1} ${tunnel-1}
+ Wait Until Keyword Succeeds 40 10 check-Tunnel-delete-on-ovs ${conn_id_2} ${tunnel-2}
Wait Until Keyword Succeeds 40 10 Get Network Topology without Tunnel ${OPERATIONAL_TOPO_API} ${tunnel-1} ${tunnel-2}
Wait Until Keyword Succeeds 40 10 Validate interface state Delete ${tunnel-1}
Wait Until Keyword Succeeds 40 10 Validate interface state Delete ${tunnel-2}
*** Test Cases ***
Create l2vlan transparent interface
[Documentation] This testcase creates a l2vlan transparent interface between 2 dpns.
- Log >>>> Creating L2vlan interface <<<<<
Create Interface ${trunk_json} transparent
- Log >>>> Get interface config <<<<<
@{l2vlan} create list l2vlan-trunk l2vlan transparent l2vlan true
Check For Elements At URI ${CONFIG_API}/ietf-interfaces:interfaces/ ${l2vlan}
- Log >>>>> Get interface operational state<<<<
Wait Until Keyword Succeeds 50 5 get operational interface ${interface_name}
- ${ovs-check} Wait Until Keyword Succeeds 40 10 table0 entry ${conn_id_1} ${bridgename}
+ Wait Until Keyword Succeeds 40 10 table0 entry ${conn_id_1} ${bridgename}
Delete l2vlan transparent interface
[Documentation] This testcase deletes the l2vlan transparent interface created between 2 dpns.
Create l2vlan trunk interface
[Documentation] This testcase creates a l2vlan trunk interface between 2 DPNs.
- Log >>>> Getting file for posting json <<<<<<<
Create Interface ${trunk_json} trunk
- Log >>>> Get interface config <<<<<
@{l2vlan} create list l2vlan-trunk l2vlan trunk tap8ed70586-6c true
Check For Elements At URI ${CONFIG_API}/ietf-interfaces:interfaces/ ${l2vlan}
- Log >>>>> Get interface operational state<<<<
Wait Until Keyword Succeeds 50 5 get operational interface ${interface_name}
Wait Until Keyword Succeeds 30 10 table0 entry ${conn_id_1} ${bridgename}
Create l2vlan Trunk member interface
[Documentation] This testcase creates a l2vlan Trunk member interface for the l2vlan trunk interface created in 1st testcase.
- Log >>>> Creating L2vlan member interface <<<<<
- Log >>>> Getting file for posting json <<<<<<<
${body} OperatingSystem.Get File ${genius_config_dir}/l2vlan_member.json
${post_resp} RequestsLibrary.Post Request session ${CONFIG_API}/ietf-interfaces:interfaces/ data=${body}
Log ${post_resp.content}
Log ${post_resp.status_code}
Should Be Equal As Strings ${post_resp.status_code} 204
- Log >>>> Get interface config <<<<<
@{l2vlan} create list l2vlan-trunk1 l2vlan trunk-member 1000 l2vlan-trunk
... true
Check For Elements At URI ${CONFIG_API}/ietf-interfaces:interfaces/ ${l2vlan}
- Log >>>>> Get interface operational state<<<<
Wait Until Keyword Succeeds 10 5 get operational interface ${l2vlan[0]}
Wait Until Keyword Succeeds 40 10 ovs check for member interface creation ${conn_id_1} ${bridgename}
Bind service on Interface
[Documentation] This testcase binds service to the interface created .
- Log >>>> Getting file for posting json <<<<<<<
${body} OperatingSystem.Get File ${genius_config_dir}/bind_service.json
${body} replace string ${body} service1 VPN
${body} replace string ${body} service2 elan
log ${post_resp.content}
log ${post_resp.status_code}
Should Be Equal As Strings ${post_resp.status_code} 204
- Log >>>>> Verifying Binded interface <<<<<
@{bind_array} create list 2 3 VPN elan 50
... 21
Check For Elements At URI ${CONFIG_API}/interface-service-bindings:service-bindings/services-info/${interface_name}/${service_mode}/ ${bind_array}
- Log >>>>> OVS check for table enteries <<<<
- ${command} set variable sudo ovs-ofctl -O OpenFlow13 dump-flows ${bridgename}
+ ${command} Set Variable sudo ovs-ofctl -O OpenFlow13 dump-flows ${bridgename}
Wait Until Keyword Succeeds 40 10 table entry ${command}
unbind service on interface
[Documentation] This testcase Unbinds the service which is binded by the 3rd testcase.
- Log >>>>>>Unbinding the service on interface <<<<
- ${service-priority-1} set variable 3
- ${service-priority-2} set variable 4
+ ${service-priority-1} Set Variable 3
+ ${service-priority-2} Set Variable 4
${service_mode} Set Variable interface-service-bindings:service-mode-ingress
Remove All Elements At URI And Verify ${CONFIG_API}/interface-service-bindings:service-bindings/services-info/${interface_name}/${service_mode}/bound-services/${service-priority-1}/
- log >>>> Ovs check for table 21 absence <<<
- ${table-id} set variable 21
+ ${table-id} Set Variable 21
Wait Until Keyword Succeeds 10 2 no goto_table entry ${table-id}
Remove All Elements At URI And Verify ${CONFIG_API}/interface-service-bindings:service-bindings/services-info/${interface_name}/${service_mode}/bound-services/${service-priority-2}/
No Content From URI session ${CONFIG_API}/interface-service-bindings:service-bindings/services-info/${interface_name}/${service_mode}/bound-services/${service-priority-2}/
- log >>>> Ovs check for table 50 absence <<<
- ${table-id} set variable 50
+ ${table-id} Set Variable 50
Wait Until Keyword Succeeds 10 2 no goto_table entry ${table-id}
Delete l2vlan trunk interface
[Documentation] Deletion of l2vlan trunk interface is done.
Remove All Elements At URI And Verify ${CONFIG_API}/ietf-interfaces:interfaces/
No Content From URI session ${OPERATIONAL_API}/ietf-interfaces:interfaces/
- ${resp} Wait Until Keyword Succeeds 30 10 no table0 entry
+ Wait Until Keyword Succeeds 30 10 no table0 entry
*** Keywords ***
get operational interface
no table0 entry
[Documentation] After Deleting trunk interface, checking for absence of table 0 in the flow dumps
switch connection ${conn_id_1}
- ${bridgename} set variable BR1
+ ${bridgename} Set Variable BR1
${ovs-check} execute command sudo ovs-ofctl -O OpenFlow13 dump-flows ${bridgename}
log ${ovs-check}
should not contain ${ovs-check} table=0
Code Review / integration / test.git / commitdiff