description "An identifier used for AutoAttach table in the MD-SAL.";
type inet:uri;
}
+ leaf bridge-id {
+ description "Node-id of the Bridge table from where Autoattach table can be referenced.";
+ type inet:uri;
+ }
leaf autoattach-uuid {
description "The unique identifier of the autoattach table.";
type yang:uuid;
}
}
}
+ list autoattach-external-ids {
+ description
+ "Key-value pairs for use by external frameworks that integrate with
+ Open vSwitch, rather than by Open vSwitch itself.";
+
+ key "autoattach-external-id-key";
+ leaf autoattach-external-id-key {
+ description "external-id name/key";
+ type string;
+ mandatory true;
+ }
+ leaf autoattach-external-id-value {
+ description "autoattach-external-id value";
+ type string;
+ mandatory true;
+ }
+ }
}
}
}
}
+ list interface-bfd {
+ description "BFD configuration for a particular interface.
+ BFD, defined in RFC 5880 and RFC 5881, allows point-to-point
+ detection of connectivity failures by occasional transmission of
+ BFD control messages.
+
+ bfd : enable: optional string, either true or false
+ True to enable BFD on this Interface. If not specified, BFD
+ will be disabled by default.
+
+ bfd : min_rx: optional string
+ containing an integer, at least 1.
+ The shortest interval, in milliseconds, at which this BFD session
+ offers to receive BFD control messages. The remote endpoint may
+ choose to send messages at a slower rate. Defaults to 1000.
+
+ bfd : min_tx: optional string
+ containing an integer, at least 1.
+ The shortest interval, in milliseconds, at which this BFD session is
+ willing to transmit BFD control messages. Messages will actually be
+ transmitted at a slower rate if the remote endpoint is not willing to
+ receive as quickly as specified. Defaults to 100.
+
+ bfd : decay_min_rx: optional string
+ containing an integer
+ An alternate receive interval, in milliseconds, that must be greater
+ than or equal to bfd:min_rx. The implementation switches from
+ bfd:min_rx to bfd:decay_min_rx when there is no obvious incoming
+ data traffic at the interface, to reduce the CPU and bandwidth cost
+ of monitoring an idle interface. This feature may be disabled by
+ setting a value of 0. This feature is reset whenever bfd:decay_min_rx
+ bfd:min_rx changes.
+
+ bfd : forwarding_if_rx: optional string, either true or false
+ When true, traffic received on the Interface is used to
+ indicate the capability of packet I/O. BFD control packets are
+ still transmitted and received. At least one BFD control
+ packet must be received every 100 * bfd:min_rx amount of time.
+ Otherwise, even if traffic are received, the bfd-status:forwarding
+ will be false.
+
+ bfd : cpath_down: optional string, either true or false
+ Set to true to notify the remote endpoint that traffic should not be
+ forwarded to this system for some reason other than a connectivity
+ failure on the interface being monitored. The typical underlying
+ reason is concatenated path down, that is, that connectivity
+ beyond the local system is down. Defaults to false.
+
+ bfd : cpath_down: optional string, either true or false
+ Set to true to notify the remote endpoint that traffic should not be
+ forwarded to this system for some reason other than a connectivity
+ failure on the interface being monitored. The typical underlying
+ reason is concatenated path down, that is, that connectivity
+ beyond the local system is down. Defaults to false.
+
+ bfd : check_tnl_key: optional string, either true or false
+ Set to true to make BFD accept only control messages with a tunnel
+ key of zero. By default, BFD accepts control messages with any
+ tunnel key.
+
+ bfd : bfd_local_dst_mac: optional string, mac address
+ Set to an Ethernet address in the form xx:xx:xx:xx:xx:xx
+ to set the MAC used as destination for transmitted BFD packets. The
+ default is 00:23:20:00:00:01
+
+ bfd : bfd_remote_dst_mac: optional string, mac address
+ Set to an Ethernet address in the form xx:xx:xx:xx:xx:xx
+ to set the MAC used for checking the destination of received BFD packets.
+ Packets with different destination MAC will not be considered as BFD packets.
+ If not specified the destination MAC address of received BFD packets
+ are not checked.
+
+ bfd : bfd_src_ip: optional string, ip address
+ Set to an IPv4 address to set the IP address used as source
+ for transmitted BFD packets. The default is 169.254.1.1
+
+ bfd : bfd_dst_ip: optional string, ip address
+ Set to an IPv4 address to set the IP address used as destination
+ for transmitted BFD packets. The default is 169.254.1.0";
+
+ key "bfd-key";
+ leaf bfd-key {
+ description "bfd name/key";
+ type string;
+ }
+ leaf bfd-value {
+ description "bfd value";
+ type string;
+ }
+ }
+
+ list interface-bfd-status {
+ description "BFD status for a particular interface.
+ The switch sets key-value pairs in the bfd_status column to
+ report the status of BFD on this interface. When BFD is not
+ enabled, with bfd:enable, the switch clears all key-value
+ pairs from bfd_status.
+
+ bfd_status : state: optional string, one of [admin_down, down, init, up]
+ Reports the state of the BFD session. The BFD session is fully
+ healthy and negotiated if UP.
+
+ bfd_status : forwarding: optional string, true or false
+ Reports whether the BFD session believes this Interface
+ may be used to forward traffic. Typically this means
+ the local session is signaling UP, and the remote
+ system isn't signaling a problem such as concatenated path down.
+
+ bfd_status : diagnostic: optional string
+ A diagnostic code specifying the local system's reason for the
+ last change in session state. The error messages are defined in
+ section 4.1 of [RFC 5880].
+
+ bfd_status : remote_state: optional string, one of [admin_down, down, init, up]
+ Reports the state of the remote endpoint's BFD session.
+
+ bfd_status : remote_diagnostic: optional string
+ A diagnostic code specifying the remote system's reason for the
+ last change in session state. The error messages are defined in
+ section 4.1 of [RFC 5880].
+
+ bfd_status : flap_count: optional string,
+ containing an integer, minimum 0
+ Counts the number of bfd_status:forwarding flaps since start.
+ A flap is considered as a change of the bfd_status:forwarding value.";
+
+ key "bfd-status-key";
+ leaf bfd-status-key {
+ description "bfd-status name/key";
+ type string;
+ }
+ leaf bfd-status-value {
+ description "bfd-status value";
+ type string;
+ }
+ }
+
leaf qos {
description "The unique identifier of the QoS entry for this port.";
type yang:uuid;
Code Review / ovsdb.git / commitdiff