From d63cae74873f3c47a1a093ffa132ed88037e1968 Mon Sep 17 00:00:00 2001 From: Jozef Behran Date: Fri, 19 Feb 2016 14:25:38 +0100 Subject: [PATCH] Performance test suite for MDSAL northbound This suite uses RestPerfClient on MDSAL northbound, via Restconf. Similar to "performance.robot" but no device is involved and thus no testtool deployment is necessary, the only needed tool is restperfclient. Change-Id: I117e790cd5434933d105ccbc29c6bcf7a9fca69e Signed-off-by: Jozef Behran --- csit/libraries/Utils.robot | 5 +- .../suites/netconf/restperfclient/mdsal.robot | 157 ++++++++++++++++++ csit/testplans/netconf-scale.txt | 1 + .../RestPerfClient/cars-delete/config.uri | 1 + .../netconf/RestPerfClient/cars/config.uri | 0 .../netconf/RestPerfClient/cars/data.xml | 5 + 6 files changed, 167 insertions(+), 2 deletions(-) create mode 100644 csit/suites/netconf/restperfclient/mdsal.robot create mode 100644 csit/variables/netconf/RestPerfClient/cars-delete/config.uri create mode 100644 csit/variables/netconf/RestPerfClient/cars/config.uri create mode 100644 csit/variables/netconf/RestPerfClient/cars/data.xml diff --git a/csit/libraries/Utils.robot b/csit/libraries/Utils.robot index f4c1bdf9ed..9acdba054c 100644 --- a/csit/libraries/Utils.robot +++ b/csit/libraries/Utils.robot @@ -413,13 +413,14 @@ Post Log Check [Return] ${resp} Get Log File Name - [Arguments] ${testtool} + [Arguments] ${testtool} ${testcase}=${EMPTY} [Documentation] Get the name of the suite sanitized to be usable as a part of filename. ... These names are used to constructs names of the log files produced ... by the testing tools so two suites using a tool wont overwrite the ... log files if they happen to run in one job. ${name}= BuiltIn.Evaluate """${SUITE_NAME}""".replace(" ","-").replace("/","-").replace(".","-") - [Return] ${testtool}--${name}.log + ${suffix}= BuiltIn.Set_Variable_If '${testcase}' != '' --${testcase} ${EMPTY} + [Return] ${testtool}--${name}${suffix}.log Set_User_Configurable_Variable_Default [Arguments] ${name} ${value} diff --git a/csit/suites/netconf/restperfclient/mdsal.robot b/csit/suites/netconf/restperfclient/mdsal.robot new file mode 100644 index 0000000000..d4c4c112ee --- /dev/null +++ b/csit/suites/netconf/restperfclient/mdsal.robot @@ -0,0 +1,157 @@ +*** Settings *** +Documentation netconf-restperfclient MDSAL performance test suite. +... +... Copyright (c) 2016 Cisco Systems, Inc. and others. All rights reserved. +... +... This program and the accompanying materials are made available under the +... terms of the Eclipse Public License v1.0 which accompanies this distribution, +... and is available at http://www.eclipse.org/legal/epl-v10.html +... +... +... Perform given count of update operations on ODL MDSAL. In first half the +... requests are directed directly to MDSAL via Restconf and in the second +... half the MDSAL is mounted onto a netconf connector and the reqursts are +... directed to that connector. In both cases the netconf-testtool-restperfclient +... tool is used to generate and send the requests and the requests are sent +... synchronously as the netconf connector mounted MDSAL does not support +... asynchronous requests. The restperfclient is used to generate the "update" +... requests, the "create" request is issued in a sepate test case. +Suite Setup Setup_Everything +Suite Teardown Teardown_Everything +Test Setup SetupUtils.Setup_Test_With_Logging_And_Fast_Failing +Test Teardown SetupUtils.Teardown_Test_Show_Bugs_And_Start_Fast_Failing_If_Test_Failed +Library DateTime +Library RequestsLibrary +Library OperatingSystem +Library SSHLibrary timeout=10s +Resource ${CURDIR}/../../../libraries/NetconfKeywords.robot +Resource ${CURDIR}/../../../libraries/NetconfViaRestconf.robot +Resource ${CURDIR}/../../../libraries/NexusKeywords.robot +Resource ${CURDIR}/../../../libraries/SetupUtils.robot +Resource ${CURDIR}/../../../libraries/Utils.robot +Variables ${CURDIR}/../../../variables/Variables.py + +*** Variables *** +${DIRECTORY_WITH_TEMPLATE_FOLDERS} ${CURDIR}/../../../variables/netconf/RestPerfClient +${REQUEST_COUNT} 65536 + +*** Test Cases *** +Create_Test_Data_For_Direct_Access + [Documentation] Send some sample test data into the device and check that the request went OK. + NetconfViaRestconf.Post_Xml_Template_Folder_Via_Restconf ${DIRECTORY_WITH_TEMPLATE_FOLDERS}${/}cars {} + +Run_RestPerfClient_Directly_On_MDSAL + [Documentation] Deploy and execute restperfclient, asking it to send the specified amount of requests to the MDSAL via Restconf. + [Timeout] ${DIRECT_MDSAL_TIMEOUT_FOR_TESTCASE} + ${restperfclientlog}= Utils.Get_Log_File_Name restperfclient direct + BuiltIn.Set_Suite_Variable ${restperfclientlog} ${restperfclientlog} + SSHLibrary.Switch_Connection ${restperfclient} + SSHLibrary.Put_File ${CURDIR}/../../../variables/netconf/RestPerfClient/request1.json + ${filename}= NexusKeywords.Deploy_Test_Tool netconf netconf-testtool rest-perf-client + SSHLibrary.Set_Client_Configuration timeout=${DIRECT_MDSAL_TIMEOUT} + ${options}= BuiltIn.Set_Variable --ip ${ODL_SYSTEM_IP} --port ${RESTCONFPORT} --edits ${REQUEST_COUNT} + ${options}= BuiltIn.Set_Variable ${options} --edit-content request1.json --async-requests false + ${options}= BuiltIn.Set_Variable ${options} --auth ${ODL_RESTCONF_USER} ${ODL_RESTCONF_PASSWORD} + ${options}= BuiltIn.Set_Variable ${options} --destination + ${prefix}= NexusKeywords.Compose_Full_Java_Command -Xmx1G -XX:MaxPermSize=256M -jar ${filename} ${options} + BuiltIn.Set_Suite_Variable ${command_prefix} ${prefix} + ${command} BuiltIn.Set_Variable ${command_prefix} /restconf/config/car:cars + BuiltIn.Log Running restperfclient: ${command} + Set_Known_Bug_Id 5413 + Execute_Command_Passes ${command} >${restperfclientlog} 2>&1 + Set_Unknown_Bug_Id + ${result}= SSHLibrary.Execute_Command grep "FINISHED. Execution time:" ${restperfclientlog} + BuiltIn.Should_Not_Be_Equal '${result}' '' + +Check_For_Failed_Direct_MDSAL_Requests + [Documentation] Make sure there are no failed requests in the restperfclient log. + ... This is a separate test case to distinguish between restperfclient + ... failure and failed requests. Failed requests are rejected because + ... we don't want to test performance of ODL rejecting our requests. + [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing + ${result}= SSHLibrary.Execute_Command grep "Request failed" ${restperfclientlog} + BuiltIn.Should_Be_Equal '${result}' '' + ${result}= SSHLibrary.Execute_Command grep "Status code" ${restperfclientlog} + BuiltIn.Should_Be_Equal '${result}' '' + +Cleanup_And_Collect_For_Direct_Access + [Documentation] Cleanup the test data produced by the direct MDSAL access. + [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing + NetconfViaRestconf.Delete_Xml_Template_Folder_Via_Restconf ${DIRECTORY_WITH_TEMPLATE_FOLDERS}${/}cars-delete {} + SSHLibrary.Get_File ${restperfclientlog} + +Create_Test_Data_For_Connector_Access + [Documentation] Create the test data container again so it is ready for the netconf connector test. + [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing + NetconfViaRestconf.Post_Xml_Template_Folder_Via_Restconf ${DIRECTORY_WITH_TEMPLATE_FOLDERS}${/}cars {} + +Configure_ODL_As_A_Device_On_Netconf + [Documentation] Configure ODL MDSAL Northbound as a Netconf device on a Netconf connector. + NetconfKeywords.Configure_Device_In_Netconf odl-mdsal-northbound-via-netconf-connector device_address=${ODL_SYSTEM_IP} device_port=${ODL_NETCONF_MDSAL_PORT} device_user=${ODL_NETCONF_USER} device_password=${ODL_NETCONF_PASSWORD} + NetconfKeywords.Wait_Device_Connected odl-mdsal-northbound-via-netconf-connector + +Run_RestPerfClient_Through_Netconf_Connector + [Documentation] Ask RestPerfClient to send the requests to the MDSAL mapped via a netconf connector. + [Timeout] ${NETCONF_CONNECTOR_MDSAL_TIMEOUT_FOR_TESTCASE} + ${restperfclientlog}= Utils.Get_Log_File_Name restperfclient netconf-connector + BuiltIn.Set_Suite_Variable ${restperfclientlog} ${restperfclientlog} + SSHLibrary.Switch_Connection ${restperfclient} + SSHLibrary.Set_Client_Configuration timeout=${NETCONF_CONNECTOR_MDSAL_TIMEOUT} + ${command} BuiltIn.Set_Variable ${command_prefix} /restconf/config/network-topology:network-topology/topology/topology-netconf/node/odl-mdsal-northbound-via-netconf-connector/yang-ext:mount/car:cars + BuiltIn.Log Running restperfclient: ${command} + Set_Known_Bug_Id 5413 + Execute_Command_Passes ${command} >${restperfclientlog} 2>&1 + Set_Unknown_Bug_Id + ${result}= SSHLibrary.Execute_Command grep "FINISHED. Execution time:" ${restperfclientlog} + BuiltIn.Should_Not_Be_Equal '${result}' '' + +Check_For_Failed_Netconf_Connector_Requests + [Documentation] Make sure there are no failed requests in the restperfclient log. + ... This is a separate test case to distinguish between restperfclient + ... failure and failed requests. Failed requests are rejected because + ... we don't want to test performance of ODL rejecting our requests. + [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing + ${result}= SSHLibrary.Execute_Command grep "Request failed" ${restperfclientlog} + BuiltIn.Should_Be_Equal '${result}' '' + ${result}= SSHLibrary.Execute_Command grep "Status code" ${restperfclientlog} + BuiltIn.Should_Be_Equal '${result}' '' + +Deconfigure_ODL_From_Netconf + [Documentation] Deconfigure the ODL MDSAL Northbound attached to a Netconf connector. + [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing + NetconfKeywords.Remove_Device_From_Netconf odl-mdsal-northbound-via-netconf-connector + +Cleanup_And_Collect_For_Connector_Access + [Documentation] Delete the test data produced by the Netconf connector MDSAL access. + [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing + NetconfViaRestconf.Delete_Xml_Template_Folder_Via_Restconf ${DIRECTORY_WITH_TEMPLATE_FOLDERS}${/}cars-delete {} + SSHLibrary.Get_File ${restperfclientlog} + +*** Keywords *** +Setup_Everything + [Documentation] Setup everything needed for the test cases. + # Setup resources used by the suite. + SetupUtils.Setup_Utils_For_Setup_And_Teardown + NetconfKeywords.Setup_Netconf_Keywords + # Connect to the tools system (rest-perf-client) + ${restperfclient}= SSHKeywords.Open_Connection_To_Tools_System + BuiltIn.Set_Suite_Variable ${restperfclient} ${restperfclient} + # Initialize artifact deployment infrastructure. + ${testtool}= SSHLibrary.Get Connection + BuiltIn.Set_Suite_Variable ${testtool} ${testtool.index} + # Calculate timeouts + ${value}= BuiltIn.Evaluate ${REQUEST_COUNT}/50+10 + Utils.Set_User_Configurable_Variable_Default DIRECT_MDSAL_TIMEOUT ${value} s + ${value}= DateTime.Add_Time_To_Time ${DIRECT_MDSAL_TIMEOUT} 60s result_format=compact + Utils.Set_User_Configurable_Variable_Default DIRECT_MDSAL_TIMEOUT_FOR_TESTCASE ${value} + ${value}= BuiltIn.Evaluate ${REQUEST_COUNT}/10+10 + Utils.Set_User_Configurable_Variable_Default NETCONF_CONNECTOR_MDSAL_TIMEOUT ${value} s + ${value}= DateTime.Add_Time_To_Time ${NETCONF_CONNECTOR_MDSAL_TIMEOUT} 60s result_format=compact + Utils.Set_User_Configurable_Variable_Default NETCONF_CONNECTOR_MDSAL_TIMEOUT_FOR_TESTCASE ${value} + +Teardown_Everything + [Documentation] Teardown the test infrastructure, perform cleanup and release all resources. + Teardown_Netconf_Via_Restconf + RequestsLibrary.Delete_All_Sessions + SSHLibrary.Switch_Connection ${testtool} + SSHLibrary.Close_Connection diff --git a/csit/testplans/netconf-scale.txt b/csit/testplans/netconf-scale.txt index 522e07002e..8af40d5843 100644 --- a/csit/testplans/netconf-scale.txt +++ b/csit/testplans/netconf-scale.txt @@ -7,5 +7,6 @@ # Place the suites in run order: integration/test/csit/suites/netconf/ready integration/test/csit/suites/netconf/restperfclient/performance.robot +integration/test/csit/suites/netconf/restperfclient/mdsal.robot integration/test/csit/suites/netconf/scale/getmulti.robot integration/test/csit/suites/netconf/scale/getsingle.robot diff --git a/csit/variables/netconf/RestPerfClient/cars-delete/config.uri b/csit/variables/netconf/RestPerfClient/cars-delete/config.uri new file mode 100644 index 0000000000..70fb5e1cb5 --- /dev/null +++ b/csit/variables/netconf/RestPerfClient/cars-delete/config.uri @@ -0,0 +1 @@ +car:cars diff --git a/csit/variables/netconf/RestPerfClient/cars/config.uri b/csit/variables/netconf/RestPerfClient/cars/config.uri new file mode 100644 index 0000000000..e69de29bb2 diff --git a/csit/variables/netconf/RestPerfClient/cars/data.xml b/csit/variables/netconf/RestPerfClient/cars/data.xml new file mode 100644 index 0000000000..dc9119902e --- /dev/null +++ b/csit/variables/netconf/RestPerfClient/cars/data.xml @@ -0,0 +1,5 @@ + + + KEEP + + -- 2.36.6