From 681385ead5cb32ecdc5cd28c319f8f5c8894b138 Mon Sep 17 00:00:00 2001 From: Jozef Gloncak Date: Mon, 3 Feb 2014 13:56:13 +0100 Subject: [PATCH] Added support for /modules, /modules/module, /operations resources support for: /restconf/modules /restconf/modules/pathToMountPoint/yang-ext:mount /restconf/modules/module/moduleName/revision /restconf/modules/module/pathToMountPoint/yang-ext:mount/moduleName/revision /restconf/operations /restconf/operations/pathToMountPoint/yang-ext:mount revision must be in format "yyyy-MM-dd" test for URIs: - /modules - /modules/module// - /operations - /modules/......./yang-ext:mount - /modules/module/........../yang-ext:mount// - /operations/........../yang-ext:mount Change-Id: I7169a25024598dd3b49d7960d1ef90bc40c5d1d5 Signed-off-by: Martin Sunal Signed-off-by: Jozef Gloncak --- .../md-sal/sal-rest-connector/pom.xml | 9 +- .../sal/rest/api/RestconfService.java | 31 +- .../impl/StructuredDataToJsonProvider.java | 4 +- .../impl/StructuredDataToXmlProvider.java | 4 +- .../sal/restconf/impl/ControllerContext.xtend | 52 +- .../sal/restconf/impl/RestconfImpl.xtend | 160 +- .../impl/test/RestGetOperationTest.java | 361 +++- .../test/resources/modules/iana-if-type.yang | 1517 +++++++++++++++++ .../resources/modules/ietf-inet-types.yang | 418 +++++ .../modules/ietf-interfaces@2013-07-04.yang | 673 ++++++++ .../modules/ietf-restconf@2013-10-19.yang | 684 ++++++++ .../resources/modules/ietf-yang-types.yang | 417 +++++ .../src/test/resources/modules/module1.yang | 12 + .../src/test/resources/modules/module2.yang | 11 + .../src/test/resources/modules/module3.yang | 5 + .../module1-behind-mount-point.yang | 10 + .../module2-behind-mount-point.yang | 9 + 17 files changed, 4349 insertions(+), 28 deletions(-) create mode 100644 opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/iana-if-type.yang create mode 100644 opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/ietf-inet-types.yang create mode 100644 opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/ietf-interfaces@2013-07-04.yang create mode 100644 opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/ietf-restconf@2013-10-19.yang create mode 100644 opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/ietf-yang-types.yang create mode 100644 opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/module1.yang create mode 100644 opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/module2.yang create mode 100644 opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/module3.yang create mode 100644 opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/modules-behind-mount-point/module1-behind-mount-point.yang create mode 100644 opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/modules-behind-mount-point/module2-behind-mount-point.yang diff --git a/opendaylight/md-sal/sal-rest-connector/pom.xml b/opendaylight/md-sal/sal-rest-connector/pom.xml index 17cfcbe4d4..ce3b05c53b 100644 --- a/opendaylight/md-sal/sal-rest-connector/pom.xml +++ b/opendaylight/md-sal/sal-rest-connector/pom.xml @@ -50,6 +50,10 @@ gson 2.2.4 + + org.opendaylight.yangtools + yang-parser-impl + @@ -68,11 +72,6 @@ 1.0.9 test - - org.opendaylight.yangtools - yang-parser-impl - test - org.glassfish.jersey.test-framework.providers jersey-test-framework-provider-grizzly2 diff --git a/opendaylight/md-sal/sal-rest-connector/src/main/java/org/opendaylight/controller/sal/rest/api/RestconfService.java b/opendaylight/md-sal/sal-rest-connector/src/main/java/org/opendaylight/controller/sal/rest/api/RestconfService.java index 848f2c48ab..347b09cf25 100644 --- a/opendaylight/md-sal/sal-rest-connector/src/main/java/org/opendaylight/controller/sal/rest/api/RestconfService.java +++ b/opendaylight/md-sal/sal-rest-connector/src/main/java/org/opendaylight/controller/sal/rest/api/RestconfService.java @@ -55,11 +55,36 @@ public interface RestconfService { @GET @Path("/modules") - @Produces({Draft02.MediaTypes.API+JSON,Draft02.MediaTypes.API+XML}) + @Produces({Draft02.MediaTypes.API+XML, Draft02.MediaTypes.API+JSON, + MediaType.APPLICATION_JSON, MediaType.APPLICATION_XML, MediaType.TEXT_XML}) public StructuredData getModules(); + @GET + @Path("/modules/{identifier:.+}") + @Produces({Draft02.MediaTypes.API+XML, Draft02.MediaTypes.API+JSON, + MediaType.APPLICATION_JSON, MediaType.APPLICATION_XML, MediaType.TEXT_XML}) + public StructuredData getModules(@PathParam("identifier") String identifier); + + @GET + @Path("/modules/module/{identifier:.+}") + @Produces({Draft02.MediaTypes.API+XML, Draft02.MediaTypes.API+JSON, + MediaType.APPLICATION_JSON, MediaType.APPLICATION_XML, MediaType.TEXT_XML}) + public StructuredData getModule(@PathParam("identifier") String identifier); + + @GET + @Path("/operations") + @Produces({Draft02.MediaTypes.API+XML, Draft02.MediaTypes.API+JSON, + MediaType.APPLICATION_JSON, MediaType.APPLICATION_XML, MediaType.TEXT_XML}) + public StructuredData getOperations(); + + @GET + @Path("/operations/{identifier:.+}") + @Produces({Draft02.MediaTypes.API+XML, Draft02.MediaTypes.API+JSON, + MediaType.APPLICATION_JSON, MediaType.APPLICATION_XML, MediaType.TEXT_XML}) + public StructuredData getOperations(@PathParam("identifier") String identifier); + @POST - @Path("/operations/{identifier}") + @Path("/operations/{identifier:.+}") @Produces({Draft02.MediaTypes.OPERATION+JSON, Draft02.MediaTypes.OPERATION+XML, Draft02.MediaTypes.DATA+JSON, Draft02.MediaTypes.DATA+XML, MediaType.APPLICATION_JSON, MediaType.APPLICATION_XML, MediaType.TEXT_XML}) @@ -69,7 +94,7 @@ public interface RestconfService { public StructuredData invokeRpc(@PathParam("identifier") String identifier, CompositeNode payload); @POST - @Path("/operations/{identifier}") + @Path("/operations/{identifier:.+}") @Produces({Draft02.MediaTypes.OPERATION+JSON, Draft02.MediaTypes.OPERATION+XML, Draft02.MediaTypes.DATA+JSON, Draft02.MediaTypes.DATA+XML, MediaType.APPLICATION_JSON, MediaType.APPLICATION_XML, MediaType.TEXT_XML}) diff --git a/opendaylight/md-sal/sal-rest-connector/src/main/java/org/opendaylight/controller/sal/rest/impl/StructuredDataToJsonProvider.java b/opendaylight/md-sal/sal-rest-connector/src/main/java/org/opendaylight/controller/sal/rest/impl/StructuredDataToJsonProvider.java index 22e08d97f4..5dba7474ca 100644 --- a/opendaylight/md-sal/sal-rest-connector/src/main/java/org/opendaylight/controller/sal/rest/impl/StructuredDataToJsonProvider.java +++ b/opendaylight/md-sal/sal-rest-connector/src/main/java/org/opendaylight/controller/sal/rest/impl/StructuredDataToJsonProvider.java @@ -31,8 +31,8 @@ import org.opendaylight.yangtools.yang.model.api.DataNodeContainer; import com.google.gson.stream.JsonWriter; @Provider -@Produces({ Draft02.MediaTypes.DATA + RestconfService.JSON, Draft02.MediaTypes.OPERATION + RestconfService.JSON, - MediaType.APPLICATION_JSON }) +@Produces({ Draft02.MediaTypes.API + RestconfService.JSON, Draft02.MediaTypes.DATA + RestconfService.JSON, + Draft02.MediaTypes.OPERATION + RestconfService.JSON, MediaType.APPLICATION_JSON }) public enum StructuredDataToJsonProvider implements MessageBodyWriter { INSTANCE; diff --git a/opendaylight/md-sal/sal-rest-connector/src/main/java/org/opendaylight/controller/sal/rest/impl/StructuredDataToXmlProvider.java b/opendaylight/md-sal/sal-rest-connector/src/main/java/org/opendaylight/controller/sal/rest/impl/StructuredDataToXmlProvider.java index b6d8c953a9..7d6b329cfa 100644 --- a/opendaylight/md-sal/sal-rest-connector/src/main/java/org/opendaylight/controller/sal/rest/impl/StructuredDataToXmlProvider.java +++ b/opendaylight/md-sal/sal-rest-connector/src/main/java/org/opendaylight/controller/sal/rest/impl/StructuredDataToXmlProvider.java @@ -37,8 +37,8 @@ import org.slf4j.LoggerFactory; import org.w3c.dom.Document; @Provider -@Produces({ Draft02.MediaTypes.DATA + RestconfService.XML, Draft02.MediaTypes.OPERATION + RestconfService.XML, - MediaType.APPLICATION_XML, MediaType.TEXT_XML }) +@Produces({ Draft02.MediaTypes.API + RestconfService.XML, Draft02.MediaTypes.DATA + RestconfService.XML, + Draft02.MediaTypes.OPERATION + RestconfService.XML, MediaType.APPLICATION_XML, MediaType.TEXT_XML }) public enum StructuredDataToXmlProvider implements MessageBodyWriter { INSTANCE; diff --git a/opendaylight/md-sal/sal-rest-connector/src/main/java/org/opendaylight/controller/sal/restconf/impl/ControllerContext.xtend b/opendaylight/md-sal/sal-rest-connector/src/main/java/org/opendaylight/controller/sal/restconf/impl/ControllerContext.xtend index 2dfe5062c8..d8a03e5d4f 100644 --- a/opendaylight/md-sal/sal-rest-connector/src/main/java/org/opendaylight/controller/sal/restconf/impl/ControllerContext.xtend +++ b/opendaylight/md-sal/sal-rest-connector/src/main/java/org/opendaylight/controller/sal/restconf/impl/ControllerContext.xtend @@ -86,7 +86,15 @@ class ControllerContext implements SchemaServiceListener { onGlobalContextUpdated(schemas) } - public def InstanceIdWithSchemaNode toInstanceIdentifier(String restconfInstance) { + def InstanceIdWithSchemaNode toInstanceIdentifier(String restconfInstance) { + return restconfInstance.toIdentifier(false) + } + + def InstanceIdWithSchemaNode toMountPointIdentifier(String restconfInstance) { + return restconfInstance.toIdentifier(true) + } + + private def InstanceIdWithSchemaNode toIdentifier(String restconfInstance, boolean toMountPointIdentifier) { checkPreconditions val pathArgs = restconfInstance.split("/"); if (pathArgs.empty) { @@ -99,8 +107,14 @@ class ControllerContext implements SchemaServiceListener { if (startModule === null) { throw new ResponseException(BAD_REQUEST, "First node in URI has to be in format \"moduleName:nodeName\"") } - val iiWithSchemaNode = collectPathArguments(InstanceIdentifier.builder(), pathArgs, - globalSchema.getLatestModule(startModule), null); + var InstanceIdWithSchemaNode iiWithSchemaNode = null; + if (toMountPointIdentifier) { + iiWithSchemaNode = collectPathArguments(InstanceIdentifier.builder(), pathArgs, + globalSchema.getLatestModule(startModule), null, true); + } else { + iiWithSchemaNode = collectPathArguments(InstanceIdentifier.builder(), pathArgs, + globalSchema.getLatestModule(startModule), null, false); + } if (iiWithSchemaNode === null) { throw new ResponseException(BAD_REQUEST, "URI has bad format") } @@ -150,6 +164,18 @@ class ControllerContext implements SchemaServiceListener { return moduleSchemas?.filterLatestModule } + def findModuleByNameAndRevision(QName module) { + checkPreconditions + checkArgument(module !== null && module.localName !== null && module.revision !== null) + return globalSchema.findModuleByName(module.localName, module.revision) + } + + def findModuleByNameAndRevision(MountInstance mountPoint, QName module) { + checkPreconditions + checkArgument(module !== null && module.localName !== null && module.revision !== null && mountPoint !== null) + return mountPoint.schemaContext?.findModuleByName(module.localName, module.revision) + } + def String toFullRestconfIdentifier(InstanceIdentifier path) { checkPreconditions val elements = path.path; @@ -211,6 +237,16 @@ class ControllerContext implements SchemaServiceListener { return module?.namespace } + def getAllModules(MountInstance mountPoint) { + checkPreconditions + return mountPoint?.schemaContext?.modules + } + + def getAllModules() { + checkPreconditions + return globalSchema.modules + } + def CharSequence toRestconfIdentifier(QName qname) { checkPreconditions var module = uriToModuleName.get(qname.namespace) @@ -281,7 +317,7 @@ class ControllerContext implements SchemaServiceListener { } private def InstanceIdWithSchemaNode collectPathArguments(InstanceIdentifierBuilder builder, List strings, - DataNodeContainer parentNode, MountInstance mountPoint) { + DataNodeContainer parentNode, MountInstance mountPoint, boolean returnJustMountPoint) { checkNotNull(strings) if (parentNode === null) { return null; @@ -318,6 +354,10 @@ class ControllerContext implements SchemaServiceListener { throw new ResponseException(BAD_REQUEST, "Mount point does not contain any schema with modules.") } + if (returnJustMountPoint) { + return new InstanceIdWithSchemaNode(InstanceIdentifier.builder().toInstance, mountPointSchema, mount) + } + if (strings.size == 1) { // any data node is not behind mount point return new InstanceIdWithSchemaNode(InstanceIdentifier.builder().toInstance, mountPointSchema, mount) } @@ -335,7 +375,7 @@ class ControllerContext implements SchemaServiceListener { } return collectPathArguments(InstanceIdentifier.builder(), strings.subList(1, strings.size), - moduleBehindMountPoint, mount); + moduleBehindMountPoint, mount, returnJustMountPoint); } var Module module = null; @@ -412,7 +452,7 @@ class ControllerContext implements SchemaServiceListener { } if (targetNode instanceof DataNodeContainer) { val remaining = strings.subList(consumed, strings.length); - val result = builder.collectPathArguments(remaining, targetNode as DataNodeContainer, mountPoint); + val result = builder.collectPathArguments(remaining, targetNode as DataNodeContainer, mountPoint, returnJustMountPoint); return result } diff --git a/opendaylight/md-sal/sal-rest-connector/src/main/java/org/opendaylight/controller/sal/restconf/impl/RestconfImpl.xtend b/opendaylight/md-sal/sal-rest-connector/src/main/java/org/opendaylight/controller/sal/restconf/impl/RestconfImpl.xtend index cbfc3edf2c..be170c75b0 100644 --- a/opendaylight/md-sal/sal-rest-connector/src/main/java/org/opendaylight/controller/sal/restconf/impl/RestconfImpl.xtend +++ b/opendaylight/md-sal/sal-rest-connector/src/main/java/org/opendaylight/controller/sal/restconf/impl/RestconfImpl.xtend @@ -9,9 +9,12 @@ package org.opendaylight.controller.sal.restconf.impl import com.google.common.base.Preconditions import java.net.URI +import java.text.ParseException +import java.text.SimpleDateFormat import java.util.ArrayList import java.util.HashMap import java.util.List +import java.util.Set import javax.ws.rs.core.Response import org.opendaylight.controller.md.sal.common.api.TransactionStatus import org.opendaylight.controller.sal.core.api.mount.MountInstance @@ -36,11 +39,25 @@ import org.opendaylight.yangtools.yang.model.api.TypeDefinition import org.opendaylight.yangtools.yang.model.api.type.IdentityrefTypeDefinition import static javax.ws.rs.core.Response.Status.* +import org.opendaylight.yangtools.yang.parser.builder.impl.LeafSchemaNodeBuilder +import org.opendaylight.yangtools.yang.parser.builder.impl.ContainerSchemaNodeBuilder +import org.opendaylight.yangtools.yang.model.util.EmptyType +import com.google.common.base.Splitter +import com.google.common.collect.Lists class RestconfImpl implements RestconfService { val static RestconfImpl INSTANCE = new RestconfImpl val static MOUNT_POINT_MODULE_NAME = "ietf-netconf" + val static REVISION_FORMAT = new SimpleDateFormat("yyyy-MM-dd") + val static RESTCONF_MODULE_DRAFT02_REVISION = "2013-10-19" + val static RESTCONF_MODULE_DRAFT02_NAME = "ietf-restconf" + val static RESTCONF_MODULE_DRAFT02_NAMESPACE = "urn:ietf:params:xml:ns:yang:ietf-restconf" + val static RESTCONF_MODULE_DRAFT02_RESTCONF_GROUPING_SCHEMA_NODE = "restconf" + val static RESTCONF_MODULE_DRAFT02_RESTCONF_CONTAINER_SCHEMA_NODE = "restconf" + val static RESTCONF_MODULE_DRAFT02_MODULES_CONTAINER_SCHEMA_NODE = "modules" + val static RESTCONF_MODULE_DRAFT02_MODULE_LIST_SCHEMA_NODE = "module" + val static RESTCONF_MODULE_DRAFT02_OPERATIONS_CONTAINER_SCHEMA_NODE = "operations" @Property BrokerFacade broker @@ -59,7 +76,148 @@ class RestconfImpl implements RestconfService { } override getModules() { - throw new UnsupportedOperationException("TODO: auto-generated method stub") + val restconfModule = getRestconfModule() + val List> modulesAsData = new ArrayList + val moduleSchemaNode = restconfModule.getSchemaNode(RESTCONF_MODULE_DRAFT02_MODULE_LIST_SCHEMA_NODE) + for (module : allModules) { + modulesAsData.add(module.toModuleCompositeNode(moduleSchemaNode)) + } + val modulesSchemaNode = restconfModule.getSchemaNode(RESTCONF_MODULE_DRAFT02_MODULES_CONTAINER_SCHEMA_NODE) + val modulesNode = NodeFactory.createImmutableCompositeNode(modulesSchemaNode.QName, null, modulesAsData) + return new StructuredData(modulesNode, modulesSchemaNode, null) + } + + override getModules(String identifier) { + var Set modules = null + var MountInstance mountPoint = null + if (identifier.contains(ControllerContext.MOUNT)) { + mountPoint = identifier.toMountPointIdentifier.mountPoint + modules = mountPoint.allModules + } else { + throw new ResponseException(BAD_REQUEST, "URI has bad format. If modules behind mount point should be showed, URI has to end with " + ControllerContext.MOUNT) + } + val List> modulesAsData = new ArrayList + val moduleSchemaNode = restconfModule.getSchemaNode(RESTCONF_MODULE_DRAFT02_MODULE_LIST_SCHEMA_NODE) + for (module : modules) { + modulesAsData.add(module.toModuleCompositeNode(moduleSchemaNode)) + } + val modulesSchemaNode = restconfModule.getSchemaNode(RESTCONF_MODULE_DRAFT02_MODULES_CONTAINER_SCHEMA_NODE) + val modulesNode = NodeFactory.createImmutableCompositeNode(modulesSchemaNode.QName, null, modulesAsData) + return new StructuredData(modulesNode, modulesSchemaNode, mountPoint) + } + + override getModule(String identifier) { + val moduleNameAndRevision = identifier.moduleNameAndRevision + var Module module = null + var MountInstance mountPoint = null + if (identifier.contains(ControllerContext.MOUNT)) { + mountPoint = identifier.toMountPointIdentifier.mountPoint + module = mountPoint.findModuleByNameAndRevision(moduleNameAndRevision) + } else { + module = findModuleByNameAndRevision(moduleNameAndRevision) + } + if (module === null) { + throw new ResponseException(BAD_REQUEST, + "Module with name '" + moduleNameAndRevision.localName + "' and revision '" + + moduleNameAndRevision.revision + "' was not found.") + } + val moduleSchemaNode = restconfModule.getSchemaNode(RESTCONF_MODULE_DRAFT02_MODULE_LIST_SCHEMA_NODE) + val moduleNode = module.toModuleCompositeNode(moduleSchemaNode) + return new StructuredData(moduleNode, moduleSchemaNode, mountPoint) + } + + override getOperations() { + return operationsFromModulesToStructuredData(allModules,null) + } + + override getOperations(String identifier) { + var Set modules = null + var MountInstance mountPoint = null + if (identifier.contains(ControllerContext.MOUNT)) { + mountPoint = identifier.toMountPointIdentifier.mountPoint + modules = mountPoint.allModules + } else { + throw new ResponseException(BAD_REQUEST, "URI has bad format. If operations behind mount point should be showed, URI has to end with " + ControllerContext.MOUNT) + } + return operationsFromModulesToStructuredData(modules,mountPoint) + } + + private def StructuredData operationsFromModulesToStructuredData(Set modules,MountInstance mountPoint) { + val List> operationsAsData = new ArrayList + val operationsSchemaNode = restconfModule.getSchemaNode(RESTCONF_MODULE_DRAFT02_OPERATIONS_CONTAINER_SCHEMA_NODE) + val fakeOperationsSchemaNode = new ContainerSchemaNodeBuilder(RESTCONF_MODULE_DRAFT02_NAME, 0, operationsSchemaNode.QName, operationsSchemaNode.path) + for (module : modules) { + for (rpc : module.rpcs) { + operationsAsData.add(NodeFactory.createImmutableSimpleNode(rpc.QName, null, null)) + val fakeRpcSchemaNode = new LeafSchemaNodeBuilder(module.name, 0, rpc.QName, null) + fakeRpcSchemaNode.setAugmenting(true) + fakeRpcSchemaNode.setType(EmptyType.instance) + fakeOperationsSchemaNode.addChildNode(fakeRpcSchemaNode.build) + } + } + val operationsNode = NodeFactory.createImmutableCompositeNode(operationsSchemaNode.QName, null, operationsAsData) + return new StructuredData(operationsNode, fakeOperationsSchemaNode.build, mountPoint) + } + + private def Module getRestconfModule() { + val restconfModule = findModuleByNameAndRevision( + QName.create(RESTCONF_MODULE_DRAFT02_NAMESPACE, RESTCONF_MODULE_DRAFT02_REVISION, + RESTCONF_MODULE_DRAFT02_NAME)) + if (restconfModule === null) { + throw new ResponseException(INTERNAL_SERVER_ERROR, "Restconf module was not found.") + } + return restconfModule + } + + private def QName getModuleNameAndRevision(String identifier) { + val indexOfMountPointFirstLetter = identifier.indexOf(ControllerContext.MOUNT) + var moduleNameAndRevision = ""; + if (indexOfMountPointFirstLetter !== -1) { // module and revision is behind mount point string + moduleNameAndRevision = identifier.substring(indexOfMountPointFirstLetter + ControllerContext.MOUNT.length) + } else ( + moduleNameAndRevision = identifier + ) + val pathArgs = Lists.newArrayList(Splitter.on("/").omitEmptyStrings.split(moduleNameAndRevision)) + if (pathArgs.length < 2) { + throw new ResponseException(BAD_REQUEST, + "URI has bad format. End of URI should be in format 'moduleName/yyyy-MM-dd'") + } + try { + val moduleName = pathArgs.head + val moduleRevision = REVISION_FORMAT.parse(pathArgs.get(1)) + return QName.create(null, moduleRevision, moduleName) + } catch(ParseException e) { + throw new ResponseException(BAD_REQUEST, "URI has bad format. It should be 'moduleName/yyyy-MM-dd'") + } + } + + private def CompositeNode toModuleCompositeNode(Module module, DataSchemaNode moduleSchemaNode) { + val List> moduleNodeValues = new ArrayList + val nameSchemaNode = (moduleSchemaNode as DataNodeContainer).findInstanceDataChildrenByName("name").head + moduleNodeValues.add(NodeFactory.createImmutableSimpleNode(nameSchemaNode.QName, null, module.name)) + val revisionSchemaNode = (moduleSchemaNode as DataNodeContainer).findInstanceDataChildrenByName("revision").head + moduleNodeValues.add(NodeFactory.createImmutableSimpleNode(revisionSchemaNode.QName, null, REVISION_FORMAT.format(module.revision))) + val namespaceSchemaNode = (moduleSchemaNode as DataNodeContainer).findInstanceDataChildrenByName("namespace").head + moduleNodeValues.add(NodeFactory.createImmutableSimpleNode(namespaceSchemaNode.QName, null, module.namespace.toString)) + val featureSchemaNode = (moduleSchemaNode as DataNodeContainer).findInstanceDataChildrenByName("feature").head + for (feature : module.features) { + moduleNodeValues.add(NodeFactory.createImmutableSimpleNode(featureSchemaNode.QName, null, feature.QName.localName)) + } + return NodeFactory.createImmutableCompositeNode(moduleSchemaNode.QName, null, moduleNodeValues) + } + + private def DataSchemaNode getSchemaNode(Module restconfModule, String schemaNodeName) { + val restconfGrouping = restconfModule.groupings.filter[g|g.QName.localName == RESTCONF_MODULE_DRAFT02_RESTCONF_GROUPING_SCHEMA_NODE].head + val restconfContainer = restconfGrouping.findInstanceDataChildrenByName(RESTCONF_MODULE_DRAFT02_RESTCONF_CONTAINER_SCHEMA_NODE).head + if (schemaNodeName == RESTCONF_MODULE_DRAFT02_OPERATIONS_CONTAINER_SCHEMA_NODE) { + return (restconfContainer as DataNodeContainer).findInstanceDataChildrenByName(RESTCONF_MODULE_DRAFT02_OPERATIONS_CONTAINER_SCHEMA_NODE).head + } else if (schemaNodeName == RESTCONF_MODULE_DRAFT02_MODULES_CONTAINER_SCHEMA_NODE) { + return (restconfContainer as DataNodeContainer).findInstanceDataChildrenByName(RESTCONF_MODULE_DRAFT02_MODULES_CONTAINER_SCHEMA_NODE).head + } else if (schemaNodeName == RESTCONF_MODULE_DRAFT02_MODULE_LIST_SCHEMA_NODE) { + val modules = (restconfContainer as DataNodeContainer).findInstanceDataChildrenByName(RESTCONF_MODULE_DRAFT02_MODULES_CONTAINER_SCHEMA_NODE).head + return (modules as DataNodeContainer).findInstanceDataChildrenByName(RESTCONF_MODULE_DRAFT02_MODULE_LIST_SCHEMA_NODE).head + } + return null } override getRoot() { diff --git a/opendaylight/md-sal/sal-rest-connector/src/test/java/org/opendaylight/controller/sal/restconf/impl/test/RestGetOperationTest.java b/opendaylight/md-sal/sal-rest-connector/src/test/java/org/opendaylight/controller/sal/restconf/impl/test/RestGetOperationTest.java index be7be9444c..f2d6aaf44f 100644 --- a/opendaylight/md-sal/sal-rest-connector/src/test/java/org/opendaylight/controller/sal/restconf/impl/test/RestGetOperationTest.java +++ b/opendaylight/md-sal/sal-rest-connector/src/test/java/org/opendaylight/controller/sal/restconf/impl/test/RestGetOperationTest.java @@ -7,10 +7,12 @@ */ package org.opendaylight.controller.sal.restconf.impl.test; +import static org.junit.Assert.*; import static org.junit.Assert.assertEquals; import static org.mockito.Matchers.any; import static org.mockito.Mockito.mock; import static org.mockito.Mockito.when; +import static org.mockito.Mockito.verify; import static org.opendaylight.controller.sal.restconf.impl.test.RestOperationUtils.createUri; import java.io.FileNotFoundException; @@ -19,13 +21,16 @@ import java.net.URI; import java.net.URISyntaxException; import java.util.ArrayList; import java.util.List; +import java.util.regex.Matcher; +import java.util.regex.Pattern; +import javax.ws.rs.core.Response; import javax.ws.rs.core.Application; import javax.ws.rs.core.MediaType; - import org.glassfish.jersey.server.ResourceConfig; import org.glassfish.jersey.test.JerseyTest; import org.junit.BeforeClass; +import org.junit.Ignore; import org.junit.Test; import org.opendaylight.controller.sal.core.api.mount.MountInstance; import org.opendaylight.controller.sal.core.api.mount.MountService; @@ -51,6 +56,9 @@ public class RestGetOperationTest extends JerseyTest { private static SchemaContext schemaContextTestModule; private static CompositeNode answerFromGet; + private static SchemaContext schemaContextModules; + private static SchemaContext schemaContextBehindMountPoint; + @BeforeClass public static void init() throws FileNotFoundException { schemaContextYangsIetf = TestUtils.loadSchemaContext("/full-versions/yangs"); @@ -62,15 +70,18 @@ public class RestGetOperationTest extends JerseyTest { restconfImpl.setBroker(brokerFacade); restconfImpl.setControllerContext(controllerContext); answerFromGet = prepareCompositeNodeWithIetfInterfacesInterfacesData(); + + schemaContextModules = TestUtils.loadSchemaContext("/modules"); + schemaContextBehindMountPoint = TestUtils.loadSchemaContext("/modules/modules-behind-mount-point"); } @Override protected Application configure() { /* enable/disable Jersey logs to console */ -// enable(TestProperties.LOG_TRAFFIC); -// enable(TestProperties.DUMP_ENTITY); -// enable(TestProperties.RECORD_LOG_LEVEL); -// set(TestProperties.RECORD_LOG_LEVEL, Level.ALL.intValue()); + // enable(TestProperties.LOG_TRAFFIC); + // enable(TestProperties.DUMP_ENTITY); + // enable(TestProperties.RECORD_LOG_LEVEL); + // set(TestProperties.RECORD_LOG_LEVEL, Level.ALL.intValue()); ResourceConfig resourceConfig = new ResourceConfig(); resourceConfig = resourceConfig.registerInstances(restconfImpl, StructuredDataToXmlProvider.INSTANCE, StructuredDataToJsonProvider.INSTANCE, XmlToCompositeNodeProvider.INSTANCE, @@ -118,7 +129,7 @@ public class RestGetOperationTest extends JerseyTest { when(mockMountService.getMountPoint(any(InstanceIdentifier.class))).thenReturn(mountInstance); ControllerContext.getInstance().setMountService(mockMountService); - + String uri = createUri("/config/", "ietf-interfaces:interfaces/interface/0/yang-ext:mount/test-module:cont/cont1"); assertEquals(200, get(uri, MediaType.APPLICATION_XML)); @@ -129,7 +140,8 @@ public class RestGetOperationTest extends JerseyTest { @Test public void getDataMountPointIntoHighestElement() throws UnsupportedEncodingException, URISyntaxException { - when(brokerFacade.readConfigurationDataBehindMountPoint(any(MountInstance.class), + when( + brokerFacade.readConfigurationDataBehindMountPoint(any(MountInstance.class), any(InstanceIdentifier.class))).thenReturn(prepareCnDataForMountPointTest()); MountInstance mountInstance = mock(MountInstance.class); when(mountInstance.getSchemaContext()).thenReturn(schemaContextTestModule); @@ -138,11 +150,342 @@ public class RestGetOperationTest extends JerseyTest { ControllerContext.getInstance().setMountService(mockMountService); - String uri = createUri("/config/", - "ietf-interfaces:interfaces/interface/0/yang-ext:mount/"); + String uri = createUri("/config/", "ietf-interfaces:interfaces/interface/0/yang-ext:mount/"); assertEquals(200, get(uri, MediaType.APPLICATION_XML)); } + // /modules + @Test + public void getModulesTest() throws UnsupportedEncodingException, FileNotFoundException { + ControllerContext.getInstance().setGlobalSchema(schemaContextModules); + + String uri = createUri("/modules", ""); + + Response response = target(uri).request("application/yang.api+json").get(); + validateModulesResponseJson(response); + + response = target(uri).request("application/yang.api+xml").get(); + validateModulesResponseXml(response); + } + + // /modules/module + @Test + public void getModuleTest() throws FileNotFoundException, UnsupportedEncodingException { + ControllerContext.getInstance().setGlobalSchema(schemaContextModules); + + String uri = createUri("/modules/module/module2/2014-01-02", ""); + + Response response = target(uri).request("application/yang.api+xml").get(); + assertEquals(200, response.getStatus()); + String responseBody = response.readEntity(String.class); + assertTrue("Module2 in xml wasn't found", prepareXmlRegex("module2", "2014-01-02", "module:2", responseBody) + .find()); + String[] split = responseBody.split(""); + + regex.append(".*<"); + regex.append(".*" + rpcName); + regex.append(".*" + namespace); + regex.append(".*/"); + regex.append(".*>"); + + regex.append(".*"); + + regex.append(".*"); + regex.append("$"); + Pattern ptrn = Pattern.compile(regex.toString(), Pattern.DOTALL); + return ptrn.matcher(searchIn); + } + + // /restconf/modules/pathToMountPoint/yang-ext:mount + @Test + public void getModulesBehindMountPoint() throws FileNotFoundException, UnsupportedEncodingException { + ControllerContext controllerContext = ControllerContext.getInstance(); + controllerContext.setGlobalSchema(schemaContextModules); + + MountInstance mountInstance = mock(MountInstance.class); + when(mountInstance.getSchemaContext()).thenReturn(schemaContextBehindMountPoint); + MountService mockMountService = mock(MountService.class); + when(mockMountService.getMountPoint(any(InstanceIdentifier.class))).thenReturn(mountInstance); + + controllerContext.setMountService(mockMountService); + + String uri = createUri("/modules/", "ietf-interfaces:interfaces/interface/0/yang-ext:mount/"); + + Response response = target(uri).request("application/yang.api+json").get(); + assertEquals(200, response.getStatus()); + String responseBody = response.readEntity(String.class); + + assertTrue( + "module1-behind-mount-point in json wasn't found", + prepareJsonRegex("module1-behind-mount-point", "2014-02-03", "module:1:behind:mount:point", + responseBody).find()); + assertTrue( + "module2-behind-mount-point in json wasn't found", + prepareJsonRegex("module2-behind-mount-point", "2014-02-04", "module:2:behind:mount:point", + responseBody).find()); + + response = target(uri).request("application/yang.api+xml").get(); + assertEquals(200, response.getStatus()); + responseBody = response.readEntity(String.class); + assertTrue( + "module1-behind-mount-point in json wasn't found", + prepareXmlRegex("module1-behind-mount-point", "2014-02-03", "module:1:behind:mount:point", responseBody) + .find()); + assertTrue( + "module2-behind-mount-point in json wasn't found", + prepareXmlRegex("module2-behind-mount-point", "2014-02-04", "module:2:behind:mount:point", responseBody) + .find()); + + } + + // /restconf/modules/module/pathToMountPoint/yang-ext:mount/moduleName/revision + @Test + public void getModuleBehindMountPoint() throws FileNotFoundException, UnsupportedEncodingException { + ControllerContext controllerContext = ControllerContext.getInstance(); + controllerContext.setGlobalSchema(schemaContextModules); + + MountInstance mountInstance = mock(MountInstance.class); + when(mountInstance.getSchemaContext()).thenReturn(schemaContextBehindMountPoint); + MountService mockMountService = mock(MountService.class); + when(mockMountService.getMountPoint(any(InstanceIdentifier.class))).thenReturn(mountInstance); + + controllerContext.setMountService(mockMountService); + + String uri = createUri("/modules/module/", + "ietf-interfaces:interfaces/interface/0/yang-ext:mount/module1-behind-mount-point/2014-02-03"); + + Response response = target(uri).request("application/yang.api+json").get(); + assertEquals(200, response.getStatus()); + String responseBody = response.readEntity(String.class); + + assertTrue( + "module1-behind-mount-point in json wasn't found", + prepareJsonRegex("module1-behind-mount-point", "2014-02-03", "module:1:behind:mount:point", + responseBody).find()); + String[] split = responseBody.split("\"module\""); + assertEquals("\"module\" element is returned more then once",2,split.length); + + + response = target(uri).request("application/yang.api+xml").get(); + assertEquals(200, response.getStatus()); + responseBody = response.readEntity(String.class); + assertTrue( + "module1-behind-mount-point in json wasn't found", + prepareXmlRegex("module1-behind-mount-point", "2014-02-03", "module:1:behind:mount:point", responseBody) + .find()); + split = responseBody.split(""); + + regex.append(".*"); + regex.append(".*" + module); + regex.append(".*<\\/name>"); + + regex.append(".*"); + regex.append(".*" + revision); + regex.append(".*<\\/revision>"); + + regex.append(".*"); + regex.append(".*" + namespace); + regex.append(".*<\\/namespace>"); + + regex.append(".*<\\/module.*>"); + + regex.append(".*"); + regex.append("$"); + + Pattern ptrn = Pattern.compile(regex.toString(), Pattern.DOTALL); + return ptrn.matcher(searchIn); + } + + private void prepareMockForModulesTest(ControllerContext mockedControllerContext) throws FileNotFoundException { + SchemaContext schemaContext = TestUtils.loadSchemaContext("/modules"); + mockedControllerContext.setGlobalSchema(schemaContext); + // when(mockedControllerContext.getGlobalSchema()).thenReturn(schemaContext); + } + private int get(String uri, String mediaType) { return target(uri).request(mediaType).get().getStatus(); } diff --git a/opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/iana-if-type.yang b/opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/iana-if-type.yang new file mode 100644 index 0000000000..7bd0003b5d --- /dev/null +++ b/opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/iana-if-type.yang @@ -0,0 +1,1517 @@ +module iana-if-type { + namespace "urn:ietf:params:xml:ns:yang:iana-if-type"; + prefix ianaift; + + organization "IANA"; + contact + " Internet Assigned Numbers Authority + + Postal: ICANN + 4676 Admiralty Way, Suite 330 + Marina del Rey, CA 90292 + + Tel: +1 310 823 9358 + E-Mail: iana&iana.org"; + description + "This YANG module defines the iana-if-type typedef, which + contains YANG definitions for IANA-registered interface types. + + This YANG module is maintained by IANA, and reflects the + 'ifType definitions' registry. + + The latest revision of this YANG module can be obtained from + the IANA web site. + + Copyright (c) 2011 IETF Trust and the persons identified as + authors of the code. All rights reserved. + + Redistribution and use in source and binary forms, with or + without modification, is permitted pursuant to, and subject + to the license terms contained in, the Simplified BSD License + set forth in Section 4.c of the IETF Trust's Legal Provisions + Relating to IETF Documents + (http://trustee.ietf.org/license-info). + + This version of this YANG module is part of RFC XXXX; see + the RFC itself for full legal notices."; + // RFC Ed.: replace XXXX with actual RFC number and remove this + // note. + + // RFC Ed.: update the date below with the date of RFC publication + // and remove this note. + revision 2013-07-04 { + description + "Initial revision."; + reference + "RFC XXXX: IANA Interface Type YANG Module"; + } + + typedef iana-if-type { + type enumeration { + enum "other" { + value 1; + description + "None of the following"; + } + enum "regular1822" { + value 2; + } + enum "hdh1822" { + value 3; + } + enum "ddnX25" { + value 4; + } + enum "rfc877x25" { + value 5; + reference + "RFC 1382 - SNMP MIB Extension for the X.25 Packet Layer"; + } + enum "ethernetCsmacd" { + value 6; + description + "For all ethernet-like interfaces, regardless of speed, + as per RFC3635."; + reference + "RFC 3635 - Definitions of Managed Objects for the + Ethernet-like Interface Types."; + } + enum "iso88023Csmacd" { + value 7; + status deprecated; + description + "Deprecated via RFC3635. + Use ethernetCsmacd(6) instead."; + reference + "RFC 3635 - Definitions of Managed Objects for the + Ethernet-like Interface Types."; + } + enum "iso88024TokenBus" { + value 8; + } + enum "iso88025TokenRing" { + value 9; + } + enum "iso88026Man" { + value 10; + } + enum "starLan" { + value 11; + status deprecated; + description + "Deprecated via RFC3635. + Use ethernetCsmacd(6) instead."; + reference + "RFC 3635 - Definitions of Managed Objects for the + Ethernet-like Interface Types."; + } + enum "proteon10Mbit" { + value 12; + } + enum "proteon80Mbit" { + value 13; + } + enum "hyperchannel" { + value 14; + } + enum "fddi" { + value 15; + reference + "RFC 1512 - FDDI Management Information Base"; + } + enum "lapb" { + value 16; + reference + "RFC 1381 - SNMP MIB Extension for X.25 LAPB"; + } + enum "sdlc" { + value 17; + } + enum "ds1" { + value 18; + description + "DS1-MIB"; + reference + "RFC 4805 - Definitions of Managed Objects for the + DS1, J1, E1, DS2, and E2 Interface Types"; + } + enum "e1" { + value 19; + status obsolete; + description + "Obsolete see DS1-MIB"; + reference + "RFC 4805 - Definitions of Managed Objects for the + DS1, J1, E1, DS2, and E2 Interface Types"; + } + enum "basicISDN" { + value 20; + description + "see also RFC2127"; + } + enum "primaryISDN" { + value 21; + } + enum "propPointToPointSerial" { + value 22; + description + "proprietary serial"; + } + enum "ppp" { + value 23; + } + enum "softwareLoopback" { + value 24; + } + enum "eon" { + value 25; + description + "CLNP over IP"; + } + enum "ethernet3Mbit" { + value 26; + } + enum "nsip" { + value 27; + description + "XNS over IP"; + } + enum "slip" { + value 28; + description + "generic SLIP"; + } + enum "ultra" { + value 29; + description + "ULTRA technologies"; + } + enum "ds3" { + value 30; + description + "DS3-MIB"; + reference + "RFC 3896 - Definitions of Managed Objects for the + DS3/E3 Interface Type"; + } + enum "sip" { + value 31; + description + "SMDS, coffee"; + reference + "RFC 1694 - Definitions of Managed Objects for SMDS + Interfaces using SMIv2"; + } + enum "frameRelay" { + value 32; + description + "DTE only."; + reference + "RFC 2115 - Management Information Base for Frame Relay + DTEs Using SMIv2"; + } + enum "rs232" { + value 33; + reference + "RFC 1659 - Definitions of Managed Objects for RS-232-like + Hardware Devices using SMIv2"; + } + enum "para" { + value 34; + description + "parallel-port"; + reference + "RFC 1660 - Definitions of Managed Objects for + Parallel-printer-like Hardware Devices using + SMIv2"; + } + enum "arcnet" { + value 35; + description + "arcnet"; + } + enum "arcnetPlus" { + value 36; + description + "arcnet plus"; + } + enum "atm" { + value 37; + description + "ATM cells"; + } + enum "miox25" { + value 38; + reference + "RFC 1461 - SNMP MIB extension for Multiprotocol + Interconnect over X.25"; + } + enum "sonet" { + value 39; + description + "SONET or SDH"; + } + enum "x25ple" { + value 40; + reference + "RFC 2127 - ISDN Management Information Base using SMIv2"; + } + enum "iso88022llc" { + value 41; + } + enum "localTalk" { + value 42; + } + enum "smdsDxi" { + value 43; + } + enum "frameRelayService" { + value 44; + description + "FRNETSERV-MIB"; + reference + "RFC 2954 - Definitions of Managed Objects for Frame + Relay Service"; + } + enum "v35" { + value 45; + } + enum "hssi" { + value 46; + } + enum "hippi" { + value 47; + } + enum "modem" { + value 48; + description + "Generic modem"; + } + enum "aal5" { + value 49; + description + "AAL5 over ATM"; + } + enum "sonetPath" { + value 50; + } + enum "sonetVT" { + value 51; + } + enum "smdsIcip" { + value 52; + description + "SMDS InterCarrier Interface"; + } + enum "propVirtual" { + value 53; + description + "proprietary virtual/internal"; + reference + "RFC 2863 - The Interfaces Group MIB"; + } + enum "propMultiplexor" { + value 54; + description + "proprietary multiplexing"; + reference + "RFC 2863 - The Interfaces Group MIB"; + } + enum "ieee80212" { + value 55; + description + "100BaseVG"; + } + enum "fibreChannel" { + value 56; + description + "Fibre Channel"; + } + enum "hippiInterface" { + value 57; + description + "HIPPI interfaces"; + } + enum "frameRelayInterconnect" { + value 58; + status obsolete; + description + "Obsolete use either + frameRelay(32) or frameRelayService(44)."; + } + enum "aflane8023" { + value 59; + description + "ATM Emulated LAN for 802.3"; + } + enum "aflane8025" { + value 60; + description + "ATM Emulated LAN for 802.5"; + } + enum "cctEmul" { + value 61; + description + "ATM Emulated circuit"; + } + enum "fastEther" { + value 62; + status deprecated; + description + "Obsoleted via RFC3635. + ethernetCsmacd(6) should be used instead"; + reference + "RFC 3635 - Definitions of Managed Objects for the + Ethernet-like Interface Types."; + } + enum "isdn" { + value 63; + description + "ISDN and X.25"; + reference + "RFC 1356 - Multiprotocol Interconnect on X.25 and ISDN + in the Packet Mode"; + } + enum "v11" { + value 64; + description + "CCITT V.11/X.21"; + } + enum "v36" { + value 65; + description + "CCITT V.36"; + } + enum "g703at64k" { + value 66; + description + "CCITT G703 at 64Kbps"; + } + enum "g703at2mb" { + value 67; + status obsolete; + description + "Obsolete see DS1-MIB"; + } + enum "qllc" { + value 68; + description + "SNA QLLC"; + } + enum "fastEtherFX" { + value 69; + status deprecated; + description + "Obsoleted via RFC3635 + ethernetCsmacd(6) should be used instead"; + reference + "RFC 3635 - Definitions of Managed Objects for the + Ethernet-like Interface Types."; + } + enum "channel" { + value 70; + description + "channel"; + } + enum "ieee80211" { + value 71; + description + "radio spread spectrum"; + } + enum "ibm370parChan" { + value 72; + description + "IBM System 360/370 OEMI Channel"; + } + enum "escon" { + value 73; + description + "IBM Enterprise Systems Connection"; + } + enum "dlsw" { + value 74; + description + "Data Link Switching"; + } + enum "isdns" { + value 75; + description + "ISDN S/T interface"; + } + enum "isdnu" { + value 76; + description + "ISDN U interface"; + } + enum "lapd" { + value 77; + description + "Link Access Protocol D"; + } + enum "ipSwitch" { + value 78; + description + "IP Switching Objects"; + } + enum "rsrb" { + value 79; + description + "Remote Source Route Bridging"; + } + enum "atmLogical" { + value 80; + description + "ATM Logical Port"; + reference + "RFC 3606 - Definitions of Supplemental Managed Objects + for ATM Interface"; + } + enum "ds0" { + value 81; + description + "Digital Signal Level 0"; + reference + "RFC 2494 - Definitions of Managed Objects for the DS0 + and DS0 Bundle Interface Type"; + } + enum "ds0Bundle" { + value 82; + description + "group of ds0s on the same ds1"; + reference + "RFC 2494 - Definitions of Managed Objects for the DS0 + and DS0 Bundle Interface Type"; + } + enum "bsc" { + value 83; + description + "Bisynchronous Protocol"; + } + enum "async" { + value 84; + description + "Asynchronous Protocol"; + } + enum "cnr" { + value 85; + description + "Combat Net Radio"; + } + enum "iso88025Dtr" { + value 86; + description + "ISO 802.5r DTR"; + } + enum "eplrs" { + value 87; + description + "Ext Pos Loc Report Sys"; + } + enum "arap" { + value 88; + description + "Appletalk Remote Access Protocol"; + } + enum "propCnls" { + value 89; + description + "Proprietary Connectionless Protocol"; + } + enum "hostPad" { + value 90; + description + "CCITT-ITU X.29 PAD Protocol"; + } + enum "termPad" { + value 91; + description + "CCITT-ITU X.3 PAD Facility"; + } + enum "frameRelayMPI" { + value 92; + description + "Multiproto Interconnect over FR"; + } + enum "x213" { + value 93; + description + "CCITT-ITU X213"; + } + enum "adsl" { + value 94; + description + "Asymmetric Digital Subscriber Loop"; + } + enum "radsl" { + value 95; + description + "Rate-Adapt. Digital Subscriber Loop"; + } + enum "sdsl" { + value 96; + description + "Symmetric Digital Subscriber Loop"; + } + enum "vdsl" { + value 97; + description + "Very H-Speed Digital Subscrib. Loop"; + } + enum "iso88025CRFPInt" { + value 98; + description + "ISO 802.5 CRFP"; + } + enum "myrinet" { + value 99; + description + "Myricom Myrinet"; + } + enum "voiceEM" { + value 100; + description + "voice recEive and transMit"; + } + enum "voiceFXO" { + value 101; + description + "voice Foreign Exchange Office"; + } + enum "voiceFXS" { + value 102; + description + "voice Foreign Exchange Station"; + } + enum "voiceEncap" { + value 103; + description + "voice encapsulation"; + } + enum "voiceOverIp" { + value 104; + description + "voice over IP encapsulation"; + } + enum "atmDxi" { + value 105; + description + "ATM DXI"; + } + enum "atmFuni" { + value 106; + description + "ATM FUNI"; + } + enum "atmIma" { + value 107; + description + "ATM IMA"; + } + enum "pppMultilinkBundle" { + value 108; + description + "PPP Multilink Bundle"; + } + enum "ipOverCdlc" { + value 109; + description + "IBM ipOverCdlc"; + } + enum "ipOverClaw" { + value 110; + description + "IBM Common Link Access to Workstn"; + } + enum "stackToStack" { + value 111; + description + "IBM stackToStack"; + } + enum "virtualIpAddress" { + value 112; + description + "IBM VIPA"; + } + enum "mpc" { + value 113; + description + "IBM multi-protocol channel support"; + } + enum "ipOverAtm" { + value 114; + description + "IBM ipOverAtm"; + reference + "RFC 2320 - Definitions of Managed Objects for Classical IP + and ARP Over ATM Using SMIv2 (IPOA-MIB)"; + } + enum "iso88025Fiber" { + value 115; + description + "ISO 802.5j Fiber Token Ring"; + } + enum "tdlc" { + value 116; + description + "IBM twinaxial data link control"; + } + enum "gigabitEthernet" { + value 117; + status deprecated; + description + "Obsoleted via RFC3635 + ethernetCsmacd(6) should be used instead"; + reference + "RFC 3635 - Definitions of Managed Objects for the + Ethernet-like Interface Types."; + } + enum "hdlc" { + value 118; + description + "HDLC"; + } + enum "lapf" { + value 119; + description + "LAP F"; + } + enum "v37" { + value 120; + description + "V.37"; + } + enum "x25mlp" { + value 121; + description + "Multi-Link Protocol"; + } + enum "x25huntGroup" { + value 122; + description + "X25 Hunt Group"; + } + enum "transpHdlc" { + value 123; + description + "Transp HDLC"; + } + enum "interleave" { + value 124; + description + "Interleave channel"; + } + enum "fast" { + value 125; + description + "Fast channel"; + } + enum "ip" { + value 126; + description + "IP (for APPN HPR in IP networks)"; + } + enum "docsCableMaclayer" { + value 127; + description + "CATV Mac Layer"; + } + enum "docsCableDownstream" { + value 128; + description + "CATV Downstream interface"; + } + enum "docsCableUpstream" { + value 129; + description + "CATV Upstream interface"; + } + enum "a12MppSwitch" { + value 130; + description + "Avalon Parallel Processor"; + } + enum "tunnel" { + value 131; + description + "Encapsulation interface"; + } + enum "coffee" { + value 132; + description + "coffee pot"; + reference + "RFC 2325 - Coffee MIB"; + } + enum "ces" { + value 133; + description + "Circuit Emulation Service"; + } + enum "atmSubInterface" { + value 134; + description + "ATM Sub Interface"; + } + enum "l2vlan" { + value 135; + description + "Layer 2 Virtual LAN using 802.1Q"; + } + enum "l3ipvlan" { + value 136; + description + "Layer 3 Virtual LAN using IP"; + } + enum "l3ipxvlan" { + value 137; + description + "Layer 3 Virtual LAN using IPX"; + } + enum "digitalPowerline" { + value 138; + description + "IP over Power Lines"; + } + enum "mediaMailOverIp" { + value 139; + description + "Multimedia Mail over IP"; + } + enum "dtm" { + value 140; + description + "Dynamic syncronous Transfer Mode"; + } + enum "dcn" { + value 141; + description + "Data Communications Network"; + } + enum "ipForward" { + value 142; + description + "IP Forwarding Interface"; + } + enum "msdsl" { + value 143; + description + "Multi-rate Symmetric DSL"; + } + enum "ieee1394" { + value 144; + description + "IEEE1394 High Performance Serial Bus"; + } + enum "if-gsn" { + value 145; + description + "HIPPI-6400"; + } + enum "dvbRccMacLayer" { + value 146; + description + "DVB-RCC MAC Layer"; + } + enum "dvbRccDownstream" { + value 147; + description + "DVB-RCC Downstream Channel"; + } + enum "dvbRccUpstream" { + value 148; + description + "DVB-RCC Upstream Channel"; + } + enum "atmVirtual" { + value 149; + description + "ATM Virtual Interface"; + } + enum "mplsTunnel" { + value 150; + description + "MPLS Tunnel Virtual Interface"; + } + enum "srp" { + value 151; + description + "Spatial Reuse Protocol"; + } + enum "voiceOverAtm" { + value 152; + description + "Voice Over ATM"; + } + enum "voiceOverFrameRelay" { + value 153; + description + "Voice Over Frame Relay"; + } + enum "idsl" { + value 154; + description + "Digital Subscriber Loop over ISDN"; + } + enum "compositeLink" { + value 155; + description + "Avici Composite Link Interface"; + } + enum "ss7SigLink" { + value 156; + description + "SS7 Signaling Link"; + } + enum "propWirelessP2P" { + value 157; + description + "Prop. P2P wireless interface"; + } + enum "frForward" { + value 158; + description + "Frame Forward Interface"; + } + enum "rfc1483" { + value 159; + description + "Multiprotocol over ATM AAL5"; + reference + "RFC 1483 - Multiprotocol Encapsulation over ATM + Adaptation Layer 5"; + } + enum "usb" { + value 160; + description + "USB Interface"; + } + enum "ieee8023adLag" { + value 161; + description + "IEEE 802.3ad Link Aggregate"; + } + enum "bgppolicyaccounting" { + value 162; + description + "BGP Policy Accounting"; + } + enum "frf16MfrBundle" { + value 163; + description + "FRF .16 Multilink Frame Relay"; + } + enum "h323Gatekeeper" { + value 164; + description + "H323 Gatekeeper"; + } + enum "h323Proxy" { + value 165; + description + "H323 Voice and Video Proxy"; + } + enum "mpls" { + value 166; + description + "MPLS"; + } + enum "mfSigLink" { + value 167; + description + "Multi-frequency signaling link"; + } + enum "hdsl2" { + value 168; + description + "High Bit-Rate DSL - 2nd generation"; + } + enum "shdsl" { + value 169; + description + "Multirate HDSL2"; + } + enum "ds1FDL" { + value 170; + description + "Facility Data Link 4Kbps on a DS1"; + } + enum "pos" { + value 171; + description + "Packet over SONET/SDH Interface"; + } + enum "dvbAsiIn" { + value 172; + description + "DVB-ASI Input"; + } + enum "dvbAsiOut" { + value 173; + description + "DVB-ASI Output"; + } + enum "plc" { + value 174; + description + "Power Line Communtications"; + } + enum "nfas" { + value 175; + description + "Non Facility Associated Signaling"; + } + enum "tr008" { + value 176; + description + "TR008"; + } + enum "gr303RDT" { + value 177; + description + "Remote Digital Terminal"; + } + enum "gr303IDT" { + value 178; + description + "Integrated Digital Terminal"; + } + enum "isup" { + value 179; + description + "ISUP"; + } + enum "propDocsWirelessMaclayer" { + value 180; + description + "Cisco proprietary Maclayer"; + } + enum "propDocsWirelessDownstream" { + value 181; + description + "Cisco proprietary Downstream"; + } + enum "propDocsWirelessUpstream" { + value 182; + description + "Cisco proprietary Upstream"; + } + enum "hiperlan2" { + value 183; + description + "HIPERLAN Type 2 Radio Interface"; + } + enum "propBWAp2Mp" { + value 184; + description + "PropBroadbandWirelessAccesspt2multipt use of this value + for IEEE 802.16 WMAN interfaces as per IEEE Std 802.16f + is deprecated and ieee80216WMAN(237) should be used + instead."; + } + enum "sonetOverheadChannel" { + value 185; + description + "SONET Overhead Channel"; + } + enum "digitalWrapperOverheadChannel" { + value 186; + description + "Digital Wrapper"; + } + enum "aal2" { + value 187; + description + "ATM adaptation layer 2"; + } + enum "radioMAC" { + value 188; + description + "MAC layer over radio links"; + } + enum "atmRadio" { + value 189; + description + "ATM over radio links"; + } + enum "imt" { + value 190; + description + "Inter Machine Trunks"; + } + enum "mvl" { + value 191; + description + "Multiple Virtual Lines DSL"; + } + enum "reachDSL" { + value 192; + description + "Long Reach DSL"; + } + enum "frDlciEndPt" { + value 193; + description + "Frame Relay DLCI End Point"; + } + enum "atmVciEndPt" { + value 194; + description + "ATM VCI End Point"; + } + enum "opticalChannel" { + value 195; + description + "Optical Channel"; + } + enum "opticalTransport" { + value 196; + description + "Optical Transport"; + } + enum "propAtm" { + value 197; + description + "Proprietary ATM"; + } + enum "voiceOverCable" { + value 198; + description + "Voice Over Cable Interface"; + } + enum "infiniband" { + value 199; + description + "Infiniband"; + } + enum "teLink" { + value 200; + description + "TE Link"; + } + enum "q2931" { + value 201; + description + "Q.2931"; + } + enum "virtualTg" { + value 202; + description + "Virtual Trunk Group"; + } + enum "sipTg" { + value 203; + description + "SIP Trunk Group"; + } + enum "sipSig" { + value 204; + description + "SIP Signaling"; + } + enum "docsCableUpstreamChannel" { + value 205; + description + "CATV Upstream Channel"; + } + enum "econet" { + value 206; + description + "Acorn Econet"; + } + enum "pon155" { + value 207; + description + "FSAN 155Mb Symetrical PON interface"; + } + enum "pon622" { + value 208; + description + "FSAN622Mb Symetrical PON interface"; + } + enum "bridge" { + value 209; + description + "Transparent bridge interface"; + } + enum "linegroup" { + value 210; + description + "Interface common to multiple lines"; + } + enum "voiceEMFGD" { + value 211; + description + "voice E&M Feature Group D"; + } + enum "voiceFGDEANA" { + value 212; + description + "voice FGD Exchange Access North American"; + } + enum "voiceDID" { + value 213; + description + "voice Direct Inward Dialing"; + } + enum "mpegTransport" { + value 214; + description + "MPEG transport interface"; + } + enum "sixToFour" { + value 215; + status deprecated; + description + "6to4 interface (DEPRECATED)"; + reference + "RFC 4087 - IP Tunnel MIB"; + } + enum "gtp" { + value 216; + description + "GTP (GPRS Tunneling Protocol)"; + } + enum "pdnEtherLoop1" { + value 217; + description + "Paradyne EtherLoop 1"; + } + enum "pdnEtherLoop2" { + value 218; + description + "Paradyne EtherLoop 2"; + } + enum "opticalChannelGroup" { + value 219; + description + "Optical Channel Group"; + } + enum "homepna" { + value 220; + description + "HomePNA ITU-T G.989"; + } + enum "gfp" { + value 221; + description + "Generic Framing Procedure (GFP)"; + } + enum "ciscoISLvlan" { + value 222; + description + "Layer 2 Virtual LAN using Cisco ISL"; + } + enum "actelisMetaLOOP" { + value 223; + description + "Acteleis proprietary MetaLOOP High Speed Link"; + } + enum "fcipLink" { + value 224; + description + "FCIP Link"; + } + enum "rpr" { + value 225; + description + "Resilient Packet Ring Interface Type"; + } + enum "qam" { + value 226; + description + "RF Qam Interface"; + } + enum "lmp" { + value 227; + description + "Link Management Protocol"; + reference + "RFC 4327 - Link Management Protocol (LMP) Management + Information Base (MIB)"; + } + enum "cblVectaStar" { + value 228; + description + "Cambridge Broadband Networks Limited VectaStar"; + } + enum "docsCableMCmtsDownstream" { + value 229; + description + "CATV Modular CMTS Downstream Interface"; + } + enum "adsl2" { + value 230; + status deprecated; + description + "Asymmetric Digital Subscriber Loop Version 2 + (DEPRECATED/OBSOLETED - please use adsl2plus(238) + instead)"; + reference + "RFC 4706 - Definitions of Managed Objects for Asymmetric + Digital Subscriber Line 2 (ADSL2)"; + } + enum "macSecControlledIF" { + value 231; + description + "MACSecControlled"; + } + enum "macSecUncontrolledIF" { + value 232; + description + "MACSecUncontrolled"; + } + enum "aviciOpticalEther" { + value 233; + description + "Avici Optical Ethernet Aggregate"; + } + enum "atmbond" { + value 234; + description + "atmbond"; + } + enum "voiceFGDOS" { + value 235; + description + "voice FGD Operator Services"; + } + enum "mocaVersion1" { + value 236; + description + "MultiMedia over Coax Alliance (MoCA) Interface + as documented in information provided privately to IANA"; + } + enum "ieee80216WMAN" { + value 237; + description + "IEEE 802.16 WMAN interface"; + } + enum "adsl2plus" { + value 238; + description + "Asymmetric Digital Subscriber Loop Version 2, + Version 2 Plus and all variants"; + } + enum "dvbRcsMacLayer" { + value 239; + description + "DVB-RCS MAC Layer"; + reference + "RFC 5728 - The SatLabs Group DVB-RCS MIB"; + } + enum "dvbTdm" { + value 240; + description + "DVB Satellite TDM"; + reference + "RFC 5728 - The SatLabs Group DVB-RCS MIB"; + } + enum "dvbRcsTdma" { + value 241; + description + "DVB-RCS TDMA"; + reference + "RFC 5728 - The SatLabs Group DVB-RCS MIB"; + } + enum "x86Laps" { + value 242; + description + "LAPS based on ITU-T X.86/Y.1323"; + } + enum "wwanPP" { + value 243; + description + "3GPP WWAN"; + } + enum "wwanPP2" { + value 244; + description + "3GPP2 WWAN"; + } + enum "voiceEBS" { + value 245; + description + "voice P-phone EBS physical interface"; + } + enum "ifPwType" { + value 246; + description + "Pseudowire interface type"; + reference + "RFC 5601 - Pseudowire (PW) Management Information Base"; + } + enum "ilan" { + value 247; + description + "Internal LAN on a bridge per IEEE 802.1ap"; + } + enum "pip" { + value 248; + description + "Provider Instance Port on a bridge per IEEE 802.1ah PBB"; + } + enum "aluELP" { + value 249; + description + "Alcatel-Lucent Ethernet Link Protection"; + } + enum "gpon" { + value 250; + description + "Gigabit-capable passive optical networks (G-PON) as per + ITU-T G.948"; + } + enum "vdsl2" { + value 251; + description + "Very high speed digital subscriber line Version 2 + (as per ITU-T Recommendation G.993.2)"; + reference + "RFC 5650 - Definitions of Managed Objects for Very High + Speed Digital Subscriber Line 2 (VDSL2)"; + } + enum "capwapDot11Profile" { + value 252; + description + "WLAN Profile Interface"; + reference + "RFC 5834 - Control and Provisioning of Wireless Access + Points (CAPWAP) Protocol Binding MIB for + IEEE 802.11"; + } + enum "capwapDot11Bss" { + value 253; + description + "WLAN BSS Interface"; + reference + "RFC 5834 - Control and Provisioning of Wireless Access + Points (CAPWAP) Protocol Binding MIB for + IEEE 802.11"; + } + enum "capwapWtpVirtualRadio" { + value 254; + description + "WTP Virtual Radio Interface"; + reference + "RFC 5833 - Control and Provisioning of Wireless Access + Points (CAPWAP) Protocol Base MIB"; + } + enum "bits" { + value 255; + description + "bitsport"; + } + enum "docsCableUpstreamRfPort" { + value 256; + description + "DOCSIS CATV Upstream RF Port"; + } + enum "cableDownstreamRfPort" { + value 257; + description + "CATV downstream RF port"; + } + enum "vmwareVirtualNic" { + value 258; + description + "VMware Virtual Network Interface"; + } + enum "ieee802154" { + value 259; + description + "IEEE 802.15.4 WPAN interface"; + reference + "IEEE 802.15.4-2006"; + } + enum "otnOdu" { + value 260; + description + "OTN Optical Data Unit"; + } + enum "otnOtu" { + value 261; + description + "OTN Optical channel Transport Unit"; + } + enum "ifVfiType" { + value 262; + description + "VPLS Forwarding Instance Interface Type"; + } + enum "g9981" { + value 263; + description + "G.998.1 bonded interface"; + } + enum "g9982" { + value 264; + description + "G.998.2 bonded interface"; + } + enum "g9983" { + value 265; + description + "G.998.3 bonded interface"; + } + enum "aluEpon" { + value 266; + description + "Ethernet Passive Optical Networks (E-PON)"; + } + enum "aluEponOnu" { + value 267; + description + "EPON Optical Network Unit"; + } + enum "aluEponPhysicalUni" { + value 268; + description + "EPON physical User to Network interface"; + } + enum "aluEponLogicalLink" { + value 269; + description + "The emulation of a point-to-point link over the EPON + layer"; + } + enum "aluGponOnu" { + value 270; + description + "GPON Optical Network Unit"; + reference + "ITU-T G.984.2"; + } + enum "aluGponPhysicalUni" { + value 271; + description + "GPON physical User to Network interface"; + reference + "ITU-T G.984.2"; + } + enum "vmwareNicTeam" { + value 272; + description + "VMware NIC Team"; + } + // value 273 reserved by IANA + } + description + "This data type is used as the syntax of the 'type' + leaf in the 'interface' list in the YANG module + ietf-interface. + + The definition of this typedef with the + addition of newly assigned values is published + periodically by the IANA, in either the Assigned + Numbers RFC, or some derivative of it specific to + Internet Network Management number assignments. (The + latest arrangements can be obtained by contacting the + IANA.) + + Requests for new values should be made to IANA via + email (iana&iana.org)."; + reference + "IANA ifType definitions registry. + "; + } +} \ No newline at end of file diff --git a/opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/ietf-inet-types.yang b/opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/ietf-inet-types.yang new file mode 100644 index 0000000000..de20febbb7 --- /dev/null +++ b/opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/ietf-inet-types.yang @@ -0,0 +1,418 @@ + module ietf-inet-types { + + namespace "urn:ietf:params:xml:ns:yang:ietf-inet-types"; + prefix "inet"; + + organization + "IETF NETMOD (NETCONF Data Modeling Language) Working Group"; + + contact + "WG Web: + WG List: + + WG Chair: David Partain + + + WG Chair: David Kessens + + + Editor: Juergen Schoenwaelder + "; + + description + "This module contains a collection of generally useful derived + YANG data types for Internet addresses and related things. + + Copyright (c) 2010 IETF Trust and the persons identified as + authors of the code. All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, is permitted pursuant to, and subject to the license + terms contained in, the Simplified BSD License set forth in Section + 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents + (http://trustee.ietf.org/license-info). + + This version of this YANG module is part of RFC 6021; see + the RFC itself for full legal notices."; + + revision 2010-09-24 { + description + "Initial revision."; + reference + "RFC 6021: Common YANG Data Types"; + } + + /*** collection of protocol field related types ***/ + + typedef ip-version { + type enumeration { + enum unknown { + value "0"; + description + "An unknown or unspecified version of the Internet protocol."; + } + enum ipv4 { + value "1"; + description + "The IPv4 protocol as defined in RFC 791."; + } + enum ipv6 { + value "2"; + description + "The IPv6 protocol as defined in RFC 2460."; + } + } + description + "This value represents the version of the IP protocol. + + In the value set and its semantics, this type is equivalent + to the InetVersion textual convention of the SMIv2."; + reference + "RFC 791: Internet Protocol + RFC 2460: Internet Protocol, Version 6 (IPv6) Specification + RFC 4001: Textual Conventions for Internet Network Addresses"; + } + + typedef dscp { + type uint8 { + range "0..63"; + } + description + "The dscp type represents a Differentiated Services Code-Point + that may be used for marking packets in a traffic stream. + + In the value set and its semantics, this type is equivalent + to the Dscp textual convention of the SMIv2."; + reference + "RFC 3289: Management Information Base for the Differentiated + Services Architecture + RFC 2474: Definition of the Differentiated Services Field + (DS Field) in the IPv4 and IPv6 Headers + RFC 2780: IANA Allocation Guidelines For Values In + the Internet Protocol and Related Headers"; + } + + typedef ipv6-flow-label { + type uint32 { + range "0..1048575"; + } + description + "The flow-label type represents flow identifier or Flow Label + in an IPv6 packet header that may be used to discriminate + traffic flows. + + In the value set and its semantics, this type is equivalent + to the IPv6FlowLabel textual convention of the SMIv2."; + reference + "RFC 3595: Textual Conventions for IPv6 Flow Label + RFC 2460: Internet Protocol, Version 6 (IPv6) Specification"; + } + + typedef port-number { + type uint16 { + range "0..65535"; + } + description + "The port-number type represents a 16-bit port number of an + Internet transport layer protocol such as UDP, TCP, DCCP, or + SCTP. Port numbers are assigned by IANA. A current list of + all assignments is available from . + + Note that the port number value zero is reserved by IANA. In + situations where the value zero does not make sense, it can + be excluded by subtyping the port-number type. + + In the value set and its semantics, this type is equivalent + to the InetPortNumber textual convention of the SMIv2."; + reference + "RFC 768: User Datagram Protocol + RFC 793: Transmission Control Protocol + RFC 4960: Stream Control Transmission Protocol + RFC 4340: Datagram Congestion Control Protocol (DCCP) + RFC 4001: Textual Conventions for Internet Network Addresses"; + } + + /*** collection of autonomous system related types ***/ + + typedef as-number { + type uint32; + description + "The as-number type represents autonomous system numbers + which identify an Autonomous System (AS). An AS is a set + of routers under a single technical administration, using + an interior gateway protocol and common metrics to route + packets within the AS, and using an exterior gateway + protocol to route packets to other ASs'. IANA maintains + the AS number space and has delegated large parts to the + regional registries. + + Autonomous system numbers were originally limited to 16 + bits. BGP extensions have enlarged the autonomous system + number space to 32 bits. This type therefore uses an uint32 + base type without a range restriction in order to support + a larger autonomous system number space. + + In the value set and its semantics, this type is equivalent + to the InetAutonomousSystemNumber textual convention of + the SMIv2."; + reference + "RFC 1930: Guidelines for creation, selection, and registration + of an Autonomous System (AS) + RFC 4271: A Border Gateway Protocol 4 (BGP-4) + RFC 4893: BGP Support for Four-octet AS Number Space + RFC 4001: Textual Conventions for Internet Network Addresses"; + } + + /*** collection of IP address and hostname related types ***/ + + typedef ip-address { + type union { + type inet:ipv4-address; + type inet:ipv6-address; + } + description + "The ip-address type represents an IP address and is IP + version neutral. The format of the textual representations + implies the IP version."; + } + + typedef ipv4-address { + type string { + pattern + '(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}' + + '([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])' + + '(%[\p{N}\p{L}]+)?'; + } + description + "The ipv4-address type represents an IPv4 address in + dotted-quad notation. The IPv4 address may include a zone + index, separated by a % sign. + + The zone index is used to disambiguate identical address + values. For link-local addresses, the zone index will + typically be the interface index number or the name of an + interface. If the zone index is not present, the default + zone of the device will be used. + + The canonical format for the zone index is the numerical + format"; + } + + typedef ipv6-address { + type string { + pattern '((:|[0-9a-fA-F]{0,4}):)([0-9a-fA-F]{0,4}:){0,5}' + + '((([0-9a-fA-F]{0,4}:)?(:|[0-9a-fA-F]{0,4}))|' + + '(((25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])\.){3}' + + '(25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])))' + + '(%[\p{N}\p{L}]+)?'; + pattern '(([^:]+:){6}(([^:]+:[^:]+)|(.*\..*)))|' + + '((([^:]+:)*[^:]+)?::(([^:]+:)*[^:]+)?)' + + '(%.+)?'; + } + description + "The ipv6-address type represents an IPv6 address in full, + mixed, shortened, and shortened-mixed notation. The IPv6 + address may include a zone index, separated by a % sign. + + The zone index is used to disambiguate identical address + values. For link-local addresses, the zone index will + typically be the interface index number or the name of an + interface. If the zone index is not present, the default + zone of the device will be used. + + The canonical format of IPv6 addresses uses the compressed + format described in RFC 4291, Section 2.2, item 2 with the + following additional rules: the :: substitution must be + applied to the longest sequence of all-zero 16-bit chunks + in an IPv6 address. If there is a tie, the first sequence + of all-zero 16-bit chunks is replaced by ::. Single + all-zero 16-bit chunks are not compressed. The canonical + format uses lowercase characters and leading zeros are + not allowed. The canonical format for the zone index is + the numerical format as described in RFC 4007, Section + 11.2."; + reference + "RFC 4291: IP Version 6 Addressing Architecture + RFC 4007: IPv6 Scoped Address Architecture + RFC 5952: A Recommendation for IPv6 Address Text Representation"; + } + + typedef ip-prefix { + type union { + type inet:ipv4-prefix; + type inet:ipv6-prefix; + } + description + "The ip-prefix type represents an IP prefix and is IP + version neutral. The format of the textual representations + implies the IP version."; + } + + typedef ipv4-prefix { + type string { + pattern + '(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}' + + '([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])' + + '/(([0-9])|([1-2][0-9])|(3[0-2]))'; + } + description + "The ipv4-prefix type represents an IPv4 address prefix. + The prefix length is given by the number following the + slash character and must be less than or equal to 32. + + A prefix length value of n corresponds to an IP address + mask that has n contiguous 1-bits from the most + significant bit (MSB) and all other bits set to 0. + + The canonical format of an IPv4 prefix has all bits of + the IPv4 address set to zero that are not part of the + IPv4 prefix."; + } + + typedef ipv6-prefix { + type string { + pattern '((:|[0-9a-fA-F]{0,4}):)([0-9a-fA-F]{0,4}:){0,5}' + + '((([0-9a-fA-F]{0,4}:)?(:|[0-9a-fA-F]{0,4}))|' + + '(((25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])\.){3}' + + '(25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])))' + + '(/(([0-9])|([0-9]{2})|(1[0-1][0-9])|(12[0-8])))'; + pattern '(([^:]+:){6}(([^:]+:[^:]+)|(.*\..*)))|' + + '((([^:]+:)*[^:]+)?::(([^:]+:)*[^:]+)?)' + + '(/.+)'; + } + description + "The ipv6-prefix type represents an IPv6 address prefix. + The prefix length is given by the number following the + slash character and must be less than or equal 128. + + A prefix length value of n corresponds to an IP address + mask that has n contiguous 1-bits from the most + significant bit (MSB) and all other bits set to 0. + + The IPv6 address should have all bits that do not belong + to the prefix set to zero. + + The canonical format of an IPv6 prefix has all bits of + the IPv6 address set to zero that are not part of the + IPv6 prefix. Furthermore, IPv6 address is represented + in the compressed format described in RFC 4291, Section + 2.2, item 2 with the following additional rules: the :: + substitution must be applied to the longest sequence of + all-zero 16-bit chunks in an IPv6 address. If there is + a tie, the first sequence of all-zero 16-bit chunks is + replaced by ::. Single all-zero 16-bit chunks are not + compressed. The canonical format uses lowercase + characters and leading zeros are not allowed."; + reference + "RFC 4291: IP Version 6 Addressing Architecture"; + } + + /*** collection of domain name and URI types ***/ + + typedef domain-name { + type string { + pattern '((([a-zA-Z0-9_]([a-zA-Z0-9\-_]){0,61})?[a-zA-Z0-9]\.)*' + + '([a-zA-Z0-9_]([a-zA-Z0-9\-_]){0,61})?[a-zA-Z0-9]\.?)' + + '|\.'; + length "1..253"; + } + description + "The domain-name type represents a DNS domain name. The + name SHOULD be fully qualified whenever possible. + + Internet domain names are only loosely specified. Section + 3.5 of RFC 1034 recommends a syntax (modified in Section + 2.1 of RFC 1123). The pattern above is intended to allow + for current practice in domain name use, and some possible + future expansion. It is designed to hold various types of + domain names, including names used for A or AAAA records + (host names) and other records, such as SRV records. Note + that Internet host names have a stricter syntax (described + in RFC 952) than the DNS recommendations in RFCs 1034 and + 1123, and that systems that want to store host names in + schema nodes using the domain-name type are recommended to + adhere to this stricter standard to ensure interoperability. + + The encoding of DNS names in the DNS protocol is limited + to 255 characters. Since the encoding consists of labels + prefixed by a length bytes and there is a trailing NULL + byte, only 253 characters can appear in the textual dotted + notation. + + The description clause of schema nodes using the domain-name + type MUST describe when and how these names are resolved to + IP addresses. Note that the resolution of a domain-name value + may require to query multiple DNS records (e.g., A for IPv4 + and AAAA for IPv6). The order of the resolution process and + which DNS record takes precedence can either be defined + explicitely or it may depend on the configuration of the + resolver. + + Domain-name values use the US-ASCII encoding. Their canonical + format uses lowercase US-ASCII characters. Internationalized + domain names MUST be encoded in punycode as described in RFC + 3492"; + reference + "RFC 952: DoD Internet Host Table Specification + RFC 1034: Domain Names - Concepts and Facilities + RFC 1123: Requirements for Internet Hosts -- Application + and Support + RFC 2782: A DNS RR for specifying the location of services + (DNS SRV) + RFC 3492: Punycode: A Bootstring encoding of Unicode for + Internationalized Domain Names in Applications + (IDNA) + RFC 5891: Internationalizing Domain Names in Applications + (IDNA): Protocol"; + } + + typedef host { + type union { + type inet:ip-address; + type inet:domain-name; + } + description + "The host type represents either an IP address or a DNS + domain name."; + } + + typedef uri { + type string; + description + "The uri type represents a Uniform Resource Identifier + (URI) as defined by STD 66. + + Objects using the uri type MUST be in US-ASCII encoding, + and MUST be normalized as described by RFC 3986 Sections + 6.2.1, 6.2.2.1, and 6.2.2.2. All unnecessary + percent-encoding is removed, and all case-insensitive + characters are set to lowercase except for hexadecimal + digits, which are normalized to uppercase as described in + Section 6.2.2.1. + + The purpose of this normalization is to help provide + unique URIs. Note that this normalization is not + sufficient to provide uniqueness. Two URIs that are + textually distinct after this normalization may still be + equivalent. + + Objects using the uri type may restrict the schemes that + they permit. For example, 'data:' and 'urn:' schemes + might not be appropriate. + + A zero-length URI is not a valid URI. This can be used to + express 'URI absent' where required. + + In the value set and its semantics, this type is equivalent + to the Uri SMIv2 textual convention defined in RFC 5017."; + reference + "RFC 3986: Uniform Resource Identifier (URI): Generic Syntax + RFC 3305: Report from the Joint W3C/IETF URI Planning Interest + Group: Uniform Resource Identifiers (URIs), URLs, + and Uniform Resource Names (URNs): Clarifications + and Recommendations + RFC 5017: MIB Textual Conventions for Uniform Resource + Identifiers (URIs)"; + } + + } diff --git a/opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/ietf-interfaces@2013-07-04.yang b/opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/ietf-interfaces@2013-07-04.yang new file mode 100644 index 0000000000..9db753c440 --- /dev/null +++ b/opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/ietf-interfaces@2013-07-04.yang @@ -0,0 +1,673 @@ +module ietf-interfaces { + + namespace "urn:ietf:params:xml:ns:yang:ietf-interfaces"; + prefix if; + + import ietf-yang-types { + prefix yang; + } + import iana-if-type { + prefix ianaift; + } + + organization + "IETF NETMOD (NETCONF Data Modeling Language) Working Group"; + + contact + "WG Web: + WG List: + + WG Chair: David Kessens + + + WG Chair: Juergen Schoenwaelder + + + Editor: Martin Bjorklund + "; + + description + "This module contains a collection of YANG definitions for + managing network interfaces. + + Copyright (c) 2013 IETF Trust and the persons identified as + authors of the code. All rights reserved. + + Redistribution and use in source and binary forms, with or + without modification, is permitted pursuant to, and subject + to the license terms contained in, the Simplified BSD License + set forth in Section 4.c of the IETF Trust's Legal Provisions + Relating to IETF Documents + (http://trustee.ietf.org/license-info). + + This version of this YANG module is part of RFC XXXX; see + the RFC itself for full legal notices."; + + // RFC Ed.: replace XXXX with actual RFC number and remove this + // note. + + // RFC Ed.: update the date below with the date of RFC publication + // and remove this note. + revision 2013-07-04 { + description + "Initial revision."; + reference + "RFC XXXX: A YANG Data Model for Interface Management"; + } + + /* Typedefs */ + + typedef interface-ref { + type leafref { + path "/if:interfaces/if:interface/if:name"; + } + description + "This type is used by data models that need to reference + configured interfaces."; + } + + typedef interface-state-ref { + type leafref { + path "/if:interfaces-state/if:interface/if:name"; + } + description + "This type is used by data models that need to reference + the operationally present interfaces."; + } + + /* Features */ + + feature arbitrary-names { + description + "This feature indicates that the device allows user-controlled + interfaces to be named arbitrarily."; + } + + feature pre-provisioning { + description + "This feature indicates that the device supports + pre-provisioning of interface configuration, i.e., it is + possible to configure an interface whose physical interface + hardware is not present on the device."; + } + + feature if-mib { + description + "This feature indicates that the device implements IF-MIB."; + reference + "RFC 2863: The Interfaces Group MIB"; + } + + /* Data nodes */ + + container interfaces { + description + "Interface configuration parameters."; + + list interface { + key "name"; + + description + "The list of configured interfaces on the device. + + The operational state of an interface is available in the + /interfaces-state/interface list. If the configuration of a + system-controlled interface cannot be used by the system + (e.g., the interface hardware present does not match the + interface type), then the configuration is not applied to + the system-controlled interface shown in the + /interfaces-state/interface list. If the the configuration + of a user-controlled interface cannot be used by the system, + the configured interface is not instantiated in the + /interfaces-state/interface list."; + + leaf name { + type string; + description + "The name of the interface. + + A device MAY restrict the allowed values for this leaf, + possibly depending on the type of the interface. + + For system-controlled interfaces, this leaf is the + device-specific name of the interface. The 'config false' + list /interfaces-state/interface contains the currently + existing interfaces on the device. + + If a client tries to create configuration for a + system-controlled interface that is not present in the + /interfaces-state/interface list, the server MAY reject + the request, if the implementation does not support + pre-provisioning of interfaces, or if the name refers to + an interface that can never exist in the system. A + NETCONF server MUST reply with an rpc-error with the + error-tag 'invalid-value' in this case. + + If the device supports pre-provisioning of interface + configuration, the feature 'pre-provisioning' is + advertised. + + If the device allows arbitrarily named user-controlled + interfaces, the feature 'arbitrary-names' is advertised. + + When a configured user-controlled interface is created by + the system, it is instantiated with the same name in the + /interface-state/interface list. Since the name in that + list MAY be mapped to ifName by an implementation, such an + implementation MUST restrict the allowed values for this + leaf so that it matches the restrictions of ifName. + + If a NETCONF server that implements this restriction is + sent a value that doesn't match the restriction, it MUST + reply with an rpc-error with the error-tag + 'invalid-value'."; + } + + leaf description { + type string; + description + "A textual description of the interface. + + This leaf MAY be mapped to ifAlias by an implementation. + Such an implementation MUST restrict the allowed values + for this leaf so that it matches the restrictions of + ifAlias. + + If a NETCONF server that implements this restriction is + sent a value that doesn't match the restriction, it MUST + reply with an rpc-error with the error-tag + 'invalid-value'. + + Since ifAlias is defined to be stored in non-volatile + storage, the MIB implementation MUST map ifAlias to the + value of 'description' in the persistently stored + datastore. + + Specifically, if the device supports ':startup', when + ifAlias is read the device MUST return the value of + 'description' in the 'startup' datastore, and when it is + written, it MUST be written to the 'running' and 'startup' + datastores. Note that it is up to the implementation if + it modifies this single leaf in 'startup', or if it + performs an implicit copy-config from 'running' to + 'startup'. + + If the device does not support ':startup', ifAlias MUST + be mapped to the 'description' leaf in the 'running' + datastore."; + reference + "RFC 2863: The Interfaces Group MIB - ifAlias"; + } + + leaf type { + type ianaift:iana-if-type; + mandatory true; + description + "The type of the interface. + + When an interface entry is created, a server MAY + initialize the type leaf with a valid value, e.g., if it + is possible to derive the type from the name of the + interface. + + If a client tries to set the type of an interface to a + value that can never be used by the system, e.g., if the + type is not supported or if the type does not match the + name of the interface, the server MUST reject the request. + A NETCONF server MUST reply with an rpc-error with the + error-tag 'invalid-value' in this case."; + reference + "RFC 2863: The Interfaces Group MIB - ifType"; + } + + leaf enabled { + type boolean; + default "true"; + description + "This leaf contains the configured, desired state of the + interface. + + Systems that implement the IF-MIB use the value of this + leaf in the 'running' datastore to set + IF-MIB.ifAdminStatus to 'up' or 'down' after an ifEntry + has been initialized, as described in RFC 2863. + + Changes in this leaf in the 'running' datastore are + reflected in ifAdminStatus, but if ifAdminStatus is + changed over SNMP, this leaf is not affected."; + reference + "RFC 2863: The Interfaces Group MIB - ifAdminStatus"; + } + + leaf link-up-down-trap-enable { + if-feature if-mib; + type enumeration { + enum enabled { + value 1; + } + enum disabled { + value 2; + } + } + description + "Controls whether linkUp/linkDown SNMP notifications + should be generated for this interface. + + If this node is not configured, the value 'enabled' is + operationally used by the server for interfaces which do + not operate on top of any other interface (i.e., there are + no 'lower-layer-if' entries), and 'disabled' otherwise."; + reference + "RFC 2863: The Interfaces Group MIB - + ifLinkUpDownTrapEnable"; + } + } + } + + container interfaces-state { + config false; + description + "Data nodes for the operational state of interfaces."; + + list interface { + key "name"; + + description + "The list of interfaces on the device. + + System-controlled interfaces created by the system are + always present in this list, whether they are configured or + not."; + + leaf name { + type string; + description + "The name of the interface. + + This leaf MAY be mapped to ifName by an implementation."; + reference + "RFC 2863: The Interfaces Group MIB - ifName"; + } + + leaf type { + type ianaift:iana-if-type; + mandatory true; + description + "The type of the interface."; + reference + "RFC 2863: The Interfaces Group MIB - ifType"; + } + + leaf admin-status { + if-feature if-mib; + type enumeration { + enum up { + value 1; + description + "Ready to pass packets."; + } + enum down { + value 2; + description + "Not ready to pass packets and not in some test mode."; + } + enum testing { + value 3; + description + "In some test mode."; + } + } + mandatory true; + description + "The desired state of the interface. + + This leaf has the same read semantics as ifAdminStatus."; + reference + "RFC 2863: The Interfaces Group MIB - ifAdminStatus"; + } + + leaf oper-status { + type enumeration { + enum up { + value 1; + description + "Ready to pass packets."; + } + enum down { + value 2; + description + "The interface does not pass any packets."; + } + enum testing { + value 3; + description + "In some test mode. No operational packets can + be passed."; + } + enum unknown { + value 4; + description + "Status cannot be determined for some reason."; + } + enum dormant { + value 5; + description + "Waiting for some external event."; + } + enum not-present { + value 6; + description + "Some component (typically hardware) is missing."; + } + enum lower-layer-down { + value 7; + description + "Down due to state of lower-layer interface(s)."; + } + } + mandatory true; + description + "The current operational state of the interface. + + This leaf has the same semantics as ifOperStatus."; + reference + "RFC 2863: The Interfaces Group MIB - ifOperStatus"; + } + + leaf last-change { + type yang:date-and-time; + description + "The time the interface entered its current operational + state. If the current state was entered prior to the + last re-initialization of the local network management + subsystem, then this node is not present."; + reference + "RFC 2863: The Interfaces Group MIB - ifLastChange"; + } + + leaf if-index { + if-feature if-mib; + type int32 { + range "1..2147483647"; + } + mandatory true; + description + "The ifIndex value for the ifEntry represented by this + interface."; + reference + "RFC 2863: The Interfaces Group MIB - ifIndex"; + } + + leaf phys-address { + type yang:phys-address; + description + "The interface's address at its protocol sub-layer. For + example, for an 802.x interface, this object normally + contains a MAC address. The interface's media-specific + modules must define the bit and byte ordering and the + format of the value of this object. For interfaces that do + not have such an address (e.g., a serial line), this node + is not present."; + reference + "RFC 2863: The Interfaces Group MIB - ifPhysAddress"; + } + + leaf-list higher-layer-if { + type interface-state-ref; + description + "A list of references to interfaces layered on top of this + interface."; + reference + "RFC 2863: The Interfaces Group MIB - ifStackTable"; + } + + leaf-list lower-layer-if { + type interface-state-ref; + description + "A list of references to interfaces layered underneath this + interface."; + reference + "RFC 2863: The Interfaces Group MIB - ifStackTable"; + } + + leaf speed { + type yang:gauge64; + units "bits / second"; + description + "An estimate of the interface's current bandwidth in bits + per second. For interfaces that do not vary in + bandwidth or for those where no accurate estimation can + be made, this node should contain the nominal bandwidth. + For interfaces that have no concept of bandwidth, this + node is not present."; + reference + "RFC 2863: The Interfaces Group MIB - + ifSpeed, ifHighSpeed"; + } + + container statistics { + description + "A collection of interface-related statistics objects."; + + leaf discontinuity-time { + type yang:date-and-time; + mandatory true; + description + "The time on the most recent occasion at which any one or + more of this interface's counters suffered a + discontinuity. If no such discontinuities have occurred + since the last re-initialization of the local management + subsystem, then this node contains the time the local + management subsystem re-initialized itself."; + } + + leaf in-octets { + type yang:counter64; + description + "The total number of octets received on the interface, + including framing characters. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - ifHCInOctets"; + } + leaf in-unicast-pkts { + type yang:counter64; + description + "The number of packets, delivered by this sub-layer to a + higher (sub-)layer, which were not addressed to a + multicast or broadcast address at this sub-layer. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - ifHCInUcastPkts"; + } + leaf in-broadcast-pkts { + type yang:counter64; + description + "The number of packets, delivered by this sub-layer to a + higher (sub-)layer, which were addressed to a broadcast + address at this sub-layer. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - + ifHCInBroadcastPkts"; + } + leaf in-multicast-pkts { + type yang:counter64; + description + "The number of packets, delivered by this sub-layer to a + higher (sub-)layer, which were addressed to a multicast + address at this sub-layer. For a MAC layer protocol, + this includes both Group and Functional addresses. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - + ifHCInMulticastPkts"; + } + leaf in-discards { + type yang:counter32; + description + "The number of inbound packets which were chosen to be + discarded even though no errors had been detected to + prevent their being deliverable to a higher-layer + protocol. One possible reason for discarding such a + packet could be to free up buffer space. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - ifInDiscards"; + } + leaf in-errors { + type yang:counter32; + description + "For packet-oriented interfaces, the number of inbound + packets that contained errors preventing them from being + deliverable to a higher-layer protocol. For character- + oriented or fixed-length interfaces, the number of + inbound transmission units that contained errors + preventing them from being deliverable to a higher-layer + protocol. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - ifInErrors"; + } + leaf in-unknown-protos { + type yang:counter32; + description + "For packet-oriented interfaces, the number of packets + received via the interface which were discarded because + of an unknown or unsupported protocol. For + character-oriented or fixed-length interfaces that + support protocol multiplexing the number of transmission + units received via the interface which were discarded + because of an unknown or unsupported protocol. For any + interface that does not support protocol multiplexing, + this counter is not present. + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - ifInUnknownProtos"; + } + + leaf out-octets { + type yang:counter64; + description + "The total number of octets transmitted out of the + interface, including framing characters. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - ifHCOutOctets"; + } + leaf out-unicast-pkts { + type yang:counter64; + description + "The total number of packets that higher-level protocols + requested be transmitted, and which were not addressed + to a multicast or broadcast address at this sub-layer, + including those that were discarded or not sent. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - ifHCOutUcastPkts"; + } + leaf out-broadcast-pkts { + type yang:counter64; + description + "The total number of packets that higher-level protocols + requested be transmitted, and which were addressed to a + broadcast address at this sub-layer, including those + that were discarded or not sent. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - + ifHCOutBroadcastPkts"; + } + leaf out-multicast-pkts { + type yang:counter64; + description + "The total number of packets that higher-level protocols + requested be transmitted, and which were addressed to a + multicast address at this sub-layer, including those + that were discarded or not sent. For a MAC layer + protocol, this includes both Group and Functional + addresses. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - + ifHCOutMulticastPkts"; + } + leaf out-discards { + type yang:counter32; + description + "The number of outbound packets which were chosen to be + discarded even though no errors had been detected to + prevent their being transmitted. One possible reason + for discarding such a packet could be to free up buffer + space. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - ifOutDiscards"; + } + leaf out-errors { + type yang:counter32; + description + "For packet-oriented interfaces, the number of outbound + packets that could not be transmitted because of errors. + For character-oriented or fixed-length interfaces, the + number of outbound transmission units that could not be + transmitted because of errors. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by the value of + 'discontinuity-time'."; + reference + "RFC 2863: The Interfaces Group MIB - ifOutErrors"; + } + } + } + } +} \ No newline at end of file diff --git a/opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/ietf-restconf@2013-10-19.yang b/opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/ietf-restconf@2013-10-19.yang new file mode 100644 index 0000000000..16766b0979 --- /dev/null +++ b/opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/ietf-restconf@2013-10-19.yang @@ -0,0 +1,684 @@ +module ietf-restconf { + namespace "urn:ietf:params:xml:ns:yang:ietf-restconf"; + prefix "restconf"; + + import ietf-yang-types { prefix yang; } + import ietf-inet-types { prefix inet; } + + organization + "IETF NETCONF (Network Configuration) Working Group"; + + contact + "Editor: Andy Bierman + + + Editor: Martin Bjorklund + + + Editor: Kent Watsen + + + Editor: Rex Fernando + "; + + description + "This module contains conceptual YANG specifications + for the YANG Patch and error content that is used in + RESTCONF protocol messages. A conceptual container + representing the RESTCONF API nodes (media type + application/yang.api). + + Note that the YANG definitions within this module do not + represent configuration data of any kind. + The YANG grouping statements provide a normative syntax + for XML and JSON message encoding purposes. + Copyright (c) 2013 IETF Trust and the persons identified as + authors of the code. All rights reserved. + + Redistribution and use in source and binary forms, with or + without modification, is permitted pursuant to, and subject + to the license terms contained in, the Simplified BSD License + set forth in Section 4.c of the IETF Trust's Legal Provisions + Relating to IETF Documents + (http://trustee.ietf.org/license-info). + + This version of this YANG module is part of RFC XXXX; see + the RFC itself for full legal notices."; + + // RFC Ed.: replace XXXX with actual RFC number and remove this + // note. + + // RFC Ed.: remove this note + // Note: extracted from draft-bierman-netconf-restconf-02.txt + + // RFC Ed.: update the date below with the date of RFC publication + // and remove this note. + revision 2013-10-19 { + description + "Initial revision."; + reference + "RFC XXXX: RESTCONF Protocol."; + } + + typedef data-resource-identifier { + type string { + length "1 .. max"; + } + description + "Contains a Data Resource Identifier formatted string + to identify a specific data node. The data node that + uses this data type SHOULD define the document root + for data resource identifiers. The default document + root is the target datastore conceptual root node. + Data resource identifiers are defined relative to + this document root."; + reference + "RFC XXXX: [sec. 5.3.1.1 ABNF For Data Resource Identifiers]"; + } + + // this typedef is TBD; not currently used + typedef datastore-identifier { + type union { + type enumeration { + enum candidate { + description + "Identifies the NETCONF shared candidate datastore."; + reference + "RFC 6241, section 8.3"; + } + enum running { + description + "Identifies the NETCONF running datastore."; + reference + "RFC 6241, section 5.1"; + } + enum startup { + description + "Identifies the NETCONF startup datastore."; + reference + "RFC 6241, section 8.7"; + } + } + type string; + } + description + "Contains a string to identify a specific datastore. + The enumerated datastore identifier values are + reserved for standard datastore names."; + } + + typedef revision-identifier { + type string { + pattern '\d{4}-\d{2}-\d{2}'; + } + description + "Represents a specific date in YYYY-MM-DD format. + TBD: make pattern more precise to exclude leading zeros."; + } + + grouping yang-patch { + description + "A grouping that contains a YANG container + representing the syntax and semantics of a + YANG Patch edit request message."; + + container yang-patch { + description + "Represents a conceptual sequence of datastore edits, + called a patch. Each patch is given a client-assigned + patch identifier. Each edit MUST be applied + in ascending order, and all edits MUST be applied. + If any errors occur, then the target datastore MUST NOT + be changed by the patch operation. + + A patch MUST be validated by the server to be a + well-formed message before any of the patch edits + are validated or attempted. + + YANG datastore validation (defined in RFC 6020, section + 8.3.3) is performed after all edits have been + individually validated. + + It is possible for a datastore constraint violation to occur + due to any node in the datastore, including nodes not + included in the edit list. Any validation errors MUST + be reported in the reply message."; + + reference + "RFC 6020, section 8.3."; + + leaf patch-id { + type string; + description + "An arbitrary string provided by the client to identify + the entire patch. This value SHOULD be present in any + audit logging records generated by the server for the + patch. Error messages returned by the server pertaining + to this patch will be identified by this patch-id value."; + } + + leaf comment { + type string { + length "0 .. 1024"; + } + description + "An arbitrary string provided by the client to describe + the entire patch. This value SHOULD be present in any + audit logging records generated by the server for the + patch."; + } + + list edit { + key edit-id; + ordered-by user; + + description + "Represents one edit within the YANG Patch + request message."; + leaf edit-id { + type string; + description + "Arbitrary string index for the edit. + Error messages returned by the server pertaining + to a specific edit will be identified by this + value."; + } + + leaf operation { + type enumeration { + enum create { + description + "The target data node is created using the + supplied value, only if it does not already + exist."; + } + enum delete { + description + "Delete the target node, only if the data resource + currently exists, otherwise return an error."; + } + enum insert { + description + "Insert the supplied value into a user-ordered + list or leaf-list entry. The target node must + represent a new data resource."; + } + enum merge { + description + "The supplied value is merged with the target data + node."; + } + enum move { + description + "Move the target node. Reorder a user-ordered + list or leaf-list. The target node must represent + an existing data resource."; + } + enum replace { + description + "The supplied value is used to replace the target + data node."; + } + enum remove { + description + "Delete the target node if it currently exists."; + } + } + mandatory true; + description + "The datastore operation requested for the associated + edit entry"; + } + + leaf target { + type data-resource-identifier; + mandatory true; + description + "Identifies the target data resource for the edit + operation."; + } + + leaf point { + when "(../operation = 'insert' or " + + "../operation = 'move') and " + + "(../where = 'before' or ../where = 'after')" { + description + "Point leaf only applies for insert or move + operations, before or after an existing entry."; + } + type data-resource-identifier; + description + "The absolute URL path for the data node that is being + used as the insertion point or move point for the + target of this edit entry."; + } + + leaf where { + when "../operation = 'insert' or ../operation = 'move'" { + description + "Where leaf only applies for insert or move + operations."; + } + type enumeration { + enum before { + description + "Insert or move a data node before the data resource + identified by the 'point' parameter."; + } + enum after { + description + "Insert or move a data node after the data resource + identified by the 'point' parameter."; + } + enum first { + description + "Insert or move a data node so it becomes ordered + as the first entry."; + } + enum last { + description + "Insert or move a data node so it becomes ordered + as the last entry."; + } + + } + default last; + description + "Identifies where a data resource will be inserted or + moved. YANG only allows these operations for + list and leaf-list data nodes that are ordered-by + user."; + } + + anyxml value { + when "(../operation = 'create' or " + + "../operation = 'merge' " + + "or ../operation = 'replace' or " + + "../operation = 'insert')" { + description + "Value node only used for create, merge, + replace, and insert operations"; + } + description + "Value used for this edit operation."; + } + } + } + + } // grouping yang-patch + + + grouping yang-patch-status { + + description + "A grouping that contains a YANG container + representing the syntax and semantics of + YANG Patch status response message."; + + container yang-patch-status { + description + "A container representing the response message + sent by the server after a YANG Patch edit + request message has been processed."; + + leaf patch-id { + type string; + description + "The patch-id value used in the request"; + } + + choice global-status { + description + "Report global errors or complete success. + If there is no case selected then errors + are reported in the edit-status container."; + + case global-errors { + uses errors; + description + "This container will be present if global + errors unrelated to a specific edit occurred."; + } + leaf ok { + type empty; + description + "This leaf will be present if the request succeeded + and there are no errors reported in the edit-status + container."; + } + } + + container edit-status { + description + "This container will be present if there are + edit-specific status responses to report."; + + list edit { + key edit-id; + + description + "Represents a list of status responses, + corresponding to edits in the YANG Patch + request message. If an edit entry was + skipped or not reached by the server, + then this list will not contain a corresponding + entry for that edit."; + + leaf edit-id { + type string; + description + "Response status is for the edit list entry + with this edit-id value."; + } + choice edit-status-choice { + description + "A choice between different types of status + responses for each edit entry."; + leaf ok { + type empty; + description + "This edit entry was invoked without any + errors detected by the server associated + with this edit."; + } + leaf location { + type inet:uri; + description + "Contains the Location header value that would be + returned if this edit causes a new resource to be + created. If the edit identified by the same edit-id + value was successfully invoked and a new resource + was created, then this field will be returned + instead of 'ok'."; + } + case errors { + uses errors; + description + "The server detected errors associated with the + edit identified by the same edit-id value."; + } + } + } + } + } + } // grouping yang-patch-status + + + grouping errors { + + description + "A grouping that contains a YANG container + representing the syntax and semantics of a + YANG Patch errors report within a response message."; + + container errors { + config false; // needed so list error does not need a key + description + "Represents an error report returned by the server if + a request results in an error."; + + list error { + description + "An entry containing information about one + specific error that occurred while processing + a RESTCONF request."; + reference "RFC 6241, Section 4.3"; + + leaf error-type { + type enumeration { + enum transport { + description "The transport layer"; + } + enum rpc { + description "The rpc or notification layer"; + } + enum protocol { + description "The protocol operation layer"; + } + enum application { + description "The server application layer"; + } + } + mandatory true; + description + "The protocol layer where the error occurred."; + } + + leaf error-tag { + type string; + mandatory true; + description + "The enumerated error tag."; + } + + leaf error-app-tag { + type string; + description + "The application-specific error tag."; + } + + leaf error-path { + type data-resource-identifier; + description + "The target data resource identifier associated + with the error, if any."; + } + leaf error-message { + type string; + description + "A message describing the error."; + } + + container error-info { + description + "A container allowing additional information + to be included in the error report."; + // arbitrary anyxml content here + } + } + } + } // grouping errors + + + grouping restconf { + + description + "A grouping that contains a YANG container + representing the syntax and semantics of + the RESTCONF API resource."; + + container restconf { + description + "Conceptual container representing the + application/yang.api resource type."; + + container config { + description + "Container representing the application/yang.datastore + resource type. Represents the conceptual root of the + unified configuration datastore containing YANG data + nodes. The child nodes of this container are + configuration data resources (application/yang.data) + defined as top-level YANG data nodes from the modules + advertised by the server in /restconf/modules."; + } + + container operational { + description + "Container representing the application/yang.datastore + resource type. Represents the conceptual root of the + operational data supported by the server. The child + nodes of this container are operational data resources + (application/yang.data) defined as top-level + YANG data nodes from the modules advertised by + the server in /restconf/modules."; + } + + container modules { + description + "Contains a list of module description entries. + These modules are currently loaded into the server."; + + list module { + key "name revision"; + description + "Each entry represents one module currently + supported by the server."; + + leaf name { + type yang:yang-identifier; + description "The YANG module name."; + } + leaf revision { + type union { + type revision-identifier; + type string { length 0; } + } + description + "The YANG module revision date. An empty string is + used if no revision statement is present in the + YANG module."; + } + leaf namespace { + type inet:uri; + mandatory true; + description + "The XML namespace identifier for this module."; + } + leaf-list feature { + type yang:yang-identifier; + description + "List of YANG feature names from this module that are + supported by the server."; + } + leaf-list deviation { + type yang:yang-identifier; + description + "List of YANG deviation module names used by this + server to modify the conformance of the module + associated with this entry."; + } + } + } + + container operations { + description + "Container for all operation resources + (application/yang.operation), + + Each resource is represented as an empty leaf with the + name of the RPC operation from the YANG rpc statement. + + E.g.; + + POST /restconf/operations/show-log-errors + + leaf show-log-errors { + type empty; + } + "; + } + + container streams { + description + "Container representing the notification event streams + supported by the server."; + reference + "RFC 5277, Section 3.4, element."; + + list stream { + key name; + description + "Each entry describes an event stream supported by + the server."; + + leaf name { + type string; + description "The stream name"; + reference "RFC 5277, Section 3.4, element."; + } + + leaf description { + type string; + description "Description of stream content"; + reference + "RFC 5277, Section 3.4, element."; + } + + leaf replay-support { + type boolean; + description + "Indicates if replay buffer supported for this stream"; + reference + "RFC 5277, Section 3.4, element."; + } + + leaf replay-log-creation-time { + type yang:date-and-time; + description + "Indicates the time the replay log for this stream + was created."; + reference + "RFC 5277, Section 3.4, + element."; + } + + leaf events { + type empty; + description + "Represents the entry point for establishing + notification delivery via server sent events."; + } + } + } + + leaf version { + type enumeration { + enum "1.0" { + description + "Version 1.0 of the RESTCONF protocol."; + } + } + config false; + description + "Contains the RESTCONF protocol version."; + } + } + } // grouping restconf + + + grouping notification { + description + "Contains the notification message wrapper definition."; + + container notification { + description + "RESTCONF notification message wrapper."; + leaf event-time { + type yang:date-and-time; + mandatory true; + description + "The time the event was generated by the + event source."; + reference + "RFC 5277, section 4, element."; + } + + /* The YANG-specific notification container is encoded + * after the 'event-time' element. The format + * corresponds to the notificationContent element + * in RFC 5277, section 4. For example: + * + * module example-one { + * ... + * notification event1 { ... } + * + * } + * + * Encoded as element 'event1' in the namespace + * for module 'example-one'. + */ + } + } // grouping notification + + } \ No newline at end of file diff --git a/opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/ietf-yang-types.yang b/opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/ietf-yang-types.yang new file mode 100644 index 0000000000..07e50b3913 --- /dev/null +++ b/opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/ietf-yang-types.yang @@ -0,0 +1,417 @@ + module ietf-yang-types { + + namespace "urn:ietf:params:xml:ns:yang:ietf-yang-types"; + prefix "yang"; + + organization + "IETF NETMOD (NETCONF Data Modeling Language) Working Group"; + + contact + "WG Web: + WG List: + + WG Chair: David Partain + + + WG Chair: David Kessens + + + Editor: Juergen Schoenwaelder + "; + + description + "This module contains a collection of generally useful derived + YANG data types. + + Copyright (c) 2010 IETF Trust and the persons identified as + authors of the code. All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, is permitted pursuant to, and subject to the license + terms contained in, the Simplified BSD License set forth in Section + 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents + (http://trustee.ietf.org/license-info). + + This version of this YANG module is part of RFC 6021; see + the RFC itself for full legal notices."; + + revision 2010-09-24 { + description + "Initial revision."; + reference + "RFC 6021: Common YANG Data Types"; + } + + /*** collection of counter and gauge types ***/ + + typedef counter32 { + type uint32; + description + "The counter32 type represents a non-negative integer + that monotonically increases until it reaches a + maximum value of 2^32-1 (4294967295 decimal), when it + wraps around and starts increasing again from zero. + + Counters have no defined 'initial' value, and thus, a + single value of a counter has (in general) no information + content. Discontinuities in the monotonically increasing + value normally occur at re-initialization of the + management system, and at other times as specified in the + description of a schema node using this type. If such + other times can occur, for example, the creation of + a schema node of type counter32 at times other than + re-initialization, then a corresponding schema node + should be defined, with an appropriate type, to indicate + the last discontinuity. + + The counter32 type should not be used for configuration + schema nodes. A default statement SHOULD NOT be used in + combination with the type counter32. + + In the value set and its semantics, this type is equivalent + to the Counter32 type of the SMIv2."; + reference + "RFC 2578: Structure of Management Information Version 2 (SMIv2)"; + } + + typedef zero-based-counter32 { + type yang:counter32; + default "0"; + description + "The zero-based-counter32 type represents a counter32 + that has the defined 'initial' value zero. + + A schema node of this type will be set to zero (0) on creation + and will thereafter increase monotonically until it reaches + a maximum value of 2^32-1 (4294967295 decimal), when it + wraps around and starts increasing again from zero. + + Provided that an application discovers a new schema node + of this type within the minimum time to wrap, it can use the + 'initial' value as a delta. It is important for a management + station to be aware of this minimum time and the actual time + between polls, and to discard data if the actual time is too + long or there is no defined minimum time. + + In the value set and its semantics, this type is equivalent + to the ZeroBasedCounter32 textual convention of the SMIv2."; + reference + "RFC 4502: Remote Network Monitoring Management Information + Base Version 2"; + } + + typedef counter64 { + type uint64; + description + "The counter64 type represents a non-negative integer + that monotonically increases until it reaches a + maximum value of 2^64-1 (18446744073709551615 decimal), + when it wraps around and starts increasing again from zero. + + Counters have no defined 'initial' value, and thus, a + single value of a counter has (in general) no information + content. Discontinuities in the monotonically increasing + value normally occur at re-initialization of the + management system, and at other times as specified in the + description of a schema node using this type. If such + other times can occur, for example, the creation of + a schema node of type counter64 at times other than + re-initialization, then a corresponding schema node + should be defined, with an appropriate type, to indicate + the last discontinuity. + + The counter64 type should not be used for configuration + schema nodes. A default statement SHOULD NOT be used in + combination with the type counter64. + + In the value set and its semantics, this type is equivalent + to the Counter64 type of the SMIv2."; + reference + "RFC 2578: Structure of Management Information Version 2 (SMIv2)"; + } + + typedef zero-based-counter64 { + type yang:counter64; + default "0"; + description + "The zero-based-counter64 type represents a counter64 that + has the defined 'initial' value zero. + + A schema node of this type will be set to zero (0) on creation + and will thereafter increase monotonically until it reaches + a maximum value of 2^64-1 (18446744073709551615 decimal), + when it wraps around and starts increasing again from zero. + + Provided that an application discovers a new schema node + of this type within the minimum time to wrap, it can use the + 'initial' value as a delta. It is important for a management + station to be aware of this minimum time and the actual time + between polls, and to discard data if the actual time is too + long or there is no defined minimum time. + + In the value set and its semantics, this type is equivalent + to the ZeroBasedCounter64 textual convention of the SMIv2."; + reference + "RFC 2856: Textual Conventions for Additional High Capacity + Data Types"; + } + + typedef gauge32 { + type uint32; + description + "The gauge32 type represents a non-negative integer, which + may increase or decrease, but shall never exceed a maximum + value, nor fall below a minimum value. The maximum value + cannot be greater than 2^32-1 (4294967295 decimal), and + the minimum value cannot be smaller than 0. The value of + a gauge32 has its maximum value whenever the information + being modeled is greater than or equal to its maximum + value, and has its minimum value whenever the information + being modeled is smaller than or equal to its minimum value. + If the information being modeled subsequently decreases + below (increases above) the maximum (minimum) value, the + gauge32 also decreases (increases). + + In the value set and its semantics, this type is equivalent + to the Gauge32 type of the SMIv2."; + reference + "RFC 2578: Structure of Management Information Version 2 (SMIv2)"; + } + + typedef gauge64 { + type uint64; + description + "The gauge64 type represents a non-negative integer, which + may increase or decrease, but shall never exceed a maximum + value, nor fall below a minimum value. The maximum value + cannot be greater than 2^64-1 (18446744073709551615), and + the minimum value cannot be smaller than 0. The value of + a gauge64 has its maximum value whenever the information + being modeled is greater than or equal to its maximum + value, and has its minimum value whenever the information + being modeled is smaller than or equal to its minimum value. + If the information being modeled subsequently decreases + below (increases above) the maximum (minimum) value, the + gauge64 also decreases (increases). + + In the value set and its semantics, this type is equivalent + to the CounterBasedGauge64 SMIv2 textual convention defined + in RFC 2856"; + reference + "RFC 2856: Textual Conventions for Additional High Capacity + Data Types"; + } + + /*** collection of identifier related types ***/ + + typedef object-identifier { + type string { + pattern '(([0-1](\.[1-3]?[0-9]))|(2\.(0|([1-9]\d*))))' + + '(\.(0|([1-9]\d*)))*'; + } + description + "The object-identifier type represents administratively + assigned names in a registration-hierarchical-name tree. + + Values of this type are denoted as a sequence of numerical + non-negative sub-identifier values. Each sub-identifier + value MUST NOT exceed 2^32-1 (4294967295). Sub-identifiers + are separated by single dots and without any intermediate + whitespace. + + The ASN.1 standard restricts the value space of the first + sub-identifier to 0, 1, or 2. Furthermore, the value space + of the second sub-identifier is restricted to the range + 0 to 39 if the first sub-identifier is 0 or 1. Finally, + the ASN.1 standard requires that an object identifier + has always at least two sub-identifier. The pattern + captures these restrictions. + + Although the number of sub-identifiers is not limited, + module designers should realize that there may be + implementations that stick with the SMIv2 limit of 128 + sub-identifiers. + + This type is a superset of the SMIv2 OBJECT IDENTIFIER type + since it is not restricted to 128 sub-identifiers. Hence, + this type SHOULD NOT be used to represent the SMIv2 OBJECT + IDENTIFIER type, the object-identifier-128 type SHOULD be + used instead."; + reference + "ISO9834-1: Information technology -- Open Systems + Interconnection -- Procedures for the operation of OSI + Registration Authorities: General procedures and top + arcs of the ASN.1 Object Identifier tree"; + } + + + + + typedef object-identifier-128 { + type object-identifier { + pattern '\d*(\.\d*){1,127}'; + } + description + "This type represents object-identifiers restricted to 128 + sub-identifiers. + + In the value set and its semantics, this type is equivalent + to the OBJECT IDENTIFIER type of the SMIv2."; + reference + "RFC 2578: Structure of Management Information Version 2 (SMIv2)"; + } + + typedef yang-identifier { + type string { + length "1..max"; + pattern '[a-zA-Z_][a-zA-Z0-9\-_.]*'; + pattern '.|..|[^xX].*|.[^mM].*|..[^lL].*'; + } + description + "A YANG identifier string as defined by the 'identifier' + rule in Section 12 of RFC 6020. An identifier must + start with an alphabetic character or an underscore + followed by an arbitrary sequence of alphabetic or + numeric characters, underscores, hyphens, or dots. + + A YANG identifier MUST NOT start with any possible + combination of the lowercase or uppercase character + sequence 'xml'."; + reference + "RFC 6020: YANG - A Data Modeling Language for the Network + Configuration Protocol (NETCONF)"; + } + + /*** collection of date and time related types ***/ + + typedef date-and-time { + type string { + pattern '\d{4}-\d{2}-\d{2}T\d{2}:\d{2}:\d{2}(\.\d+)?' + + '(Z|[\+\-]\d{2}:\d{2})'; + } + description + "The date-and-time type is a profile of the ISO 8601 + standard for representation of dates and times using the + Gregorian calendar. The profile is defined by the + date-time production in Section 5.6 of RFC 3339. + + The date-and-time type is compatible with the dateTime XML + schema type with the following notable exceptions: + + (a) The date-and-time type does not allow negative years. + + (b) The date-and-time time-offset -00:00 indicates an unknown + time zone (see RFC 3339) while -00:00 and +00:00 and Z all + represent the same time zone in dateTime. + + (c) The canonical format (see below) of data-and-time values + differs from the canonical format used by the dateTime XML + schema type, which requires all times to be in UTC using the + time-offset 'Z'. + + This type is not equivalent to the DateAndTime textual + convention of the SMIv2 since RFC 3339 uses a different + separator between full-date and full-time and provides + higher resolution of time-secfrac. + + The canonical format for date-and-time values with a known time + zone uses a numeric time zone offset that is calculated using + the device's configured known offset to UTC time. A change of + the device's offset to UTC time will cause date-and-time values + to change accordingly. Such changes might happen periodically + in case a server follows automatically daylight saving time + (DST) time zone offset changes. The canonical format for + date-and-time values with an unknown time zone (usually referring + to the notion of local time) uses the time-offset -00:00."; + reference + "RFC 3339: Date and Time on the Internet: Timestamps + RFC 2579: Textual Conventions for SMIv2 + XSD-TYPES: XML Schema Part 2: Datatypes Second Edition"; + } + + typedef timeticks { + type uint32; + description + "The timeticks type represents a non-negative integer that + represents the time, modulo 2^32 (4294967296 decimal), in + hundredths of a second between two epochs. When a schema + node is defined that uses this type, the description of + the schema node identifies both of the reference epochs. + + In the value set and its semantics, this type is equivalent + to the TimeTicks type of the SMIv2."; + reference + "RFC 2578: Structure of Management Information Version 2 (SMIv2)"; + } + + typedef timestamp { + type yang:timeticks; + description + "The timestamp type represents the value of an associated + timeticks schema node at which a specific occurrence happened. + The specific occurrence must be defined in the description + of any schema node defined using this type. When the specific + occurrence occurred prior to the last time the associated + timeticks attribute was zero, then the timestamp value is + zero. Note that this requires all timestamp values to be + reset to zero when the value of the associated timeticks + attribute reaches 497+ days and wraps around to zero. + + The associated timeticks schema node must be specified + in the description of any schema node using this type. + + In the value set and its semantics, this type is equivalent + to the TimeStamp textual convention of the SMIv2."; + reference + "RFC 2579: Textual Conventions for SMIv2"; + } + + /*** collection of generic address types ***/ + + typedef phys-address { + type string { + pattern '([0-9a-fA-F]{2}(:[0-9a-fA-F]{2})*)?'; + } + description + "Represents media- or physical-level addresses represented + as a sequence octets, each octet represented by two hexadecimal + numbers. Octets are separated by colons. The canonical + representation uses lowercase characters. + + In the value set and its semantics, this type is equivalent + to the PhysAddress textual convention of the SMIv2."; + reference + "RFC 2579: Textual Conventions for SMIv2"; + } + + typedef mac-address { + type string { + pattern '[0-9a-fA-F]{2}(:[0-9a-fA-F]{2}){5}'; + } + description + "The mac-address type represents an IEEE 802 MAC address. + The canonical representation uses lowercase characters. + + In the value set and its semantics, this type is equivalent + to the MacAddress textual convention of the SMIv2."; + reference + "IEEE 802: IEEE Standard for Local and Metropolitan Area + Networks: Overview and Architecture + RFC 2579: Textual Conventions for SMIv2"; + } + + /*** collection of XML specific types ***/ + + typedef xpath1.0 { + type string; + description + "This type represents an XPATH 1.0 expression. + + When a schema node is defined that uses this type, the + description of the schema node MUST specify the XPath + context in which the XPath expression is evaluated."; + reference + "XPATH: XML Path Language (XPath) Version 1.0"; + } + + } diff --git a/opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/module1.yang b/opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/module1.yang new file mode 100644 index 0000000000..604fe9458c --- /dev/null +++ b/opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/module1.yang @@ -0,0 +1,12 @@ +module module1 { + namespace "module:1"; + prefix "mod1"; + revision "2014-01-01"; + + rpc dummy-rpc1-module1 { + } + + rpc dummy-rpc2-module1 { + } + +} \ No newline at end of file diff --git a/opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/module2.yang b/opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/module2.yang new file mode 100644 index 0000000000..7b359f3efb --- /dev/null +++ b/opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/module2.yang @@ -0,0 +1,11 @@ +module module2 { + namespace "module:2"; + prefix "mod2"; + revision "2014-01-02"; + + rpc dummy-rpc1-module2 { + } + + rpc dummy-rpc2-module2 { + } +} \ No newline at end of file diff --git a/opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/module3.yang b/opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/module3.yang new file mode 100644 index 0000000000..39bb690be0 --- /dev/null +++ b/opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/module3.yang @@ -0,0 +1,5 @@ +module module3 { + namespace "module:3"; + prefix "mod3"; + revision "2014-01-03"; +} \ No newline at end of file diff --git a/opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/modules-behind-mount-point/module1-behind-mount-point.yang b/opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/modules-behind-mount-point/module1-behind-mount-point.yang new file mode 100644 index 0000000000..e48184b4df --- /dev/null +++ b/opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/modules-behind-mount-point/module1-behind-mount-point.yang @@ -0,0 +1,10 @@ +module module1-behind-mount-point { + namespace "module:1:behind:mount:point"; + prefix "mod1bemopo"; + revision "2014-02-03"; + + rpc rpc-behind-module1 { + } + + +} \ No newline at end of file diff --git a/opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/modules-behind-mount-point/module2-behind-mount-point.yang b/opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/modules-behind-mount-point/module2-behind-mount-point.yang new file mode 100644 index 0000000000..89b8c02eba --- /dev/null +++ b/opendaylight/md-sal/sal-rest-connector/src/test/resources/modules/modules-behind-mount-point/module2-behind-mount-point.yang @@ -0,0 +1,9 @@ +module module2-behind-mount-point { + namespace "module:2:behind:mount:point"; + prefix "mod2bemopo"; + revision "2014-02-04"; + + rpc rpc-behind-module2 { + } + +} \ No newline at end of file -- 2.36.6