*** Settings ***
Documentation Metconf MDSAL Northbound test suite.
...
... Copyright (c) 2015 Cisco Systems, Inc. and others. All rights reserved.
...
... This program and the accompanying materials are made available under the
... terms of the Eclipse Public License v1.0 which accompanies this distribution,
... and is available at http://www.eclipse.org/legal/epl-v10.html
...
...
... The request produced by test cases "Get Config Running", "Get Config Running
... To Confirm No_Edit Before Commit", "Get Config Running To Confirm Delete
... After Commit" and "Get Config Candidate To Confirm Discard" all use the same
... message id ("empty") for their requests. This is possible because the
... requests produced by this suite are strictly serialized. The RFC 6241 does
... not state that these IDs are unique, it only requires that each ID used is
... "XML attribute normalized" if the client wants it to be returned unmodified.
... The RFC specifically says that "the content of this attribute is not
... interpreted in any way, it only is stored to be returned with the reply to
... the request. The reuse of the "empty" string for the 4 test cases was chosen
... for simplicity.
...
... TODO: Change the 4 testcases to use unique message IDs.
Suite Setup Setup_Everything
Suite Teardown Teardown_Everything
Test Setup SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
Library RequestsLibrary
Library SSHLibrary
Resource ${CURDIR}/../../../libraries/FailFast.robot
Resource ${CURDIR}/../../../libraries/SetupUtils.robot
Resource ${CURDIR}/../../../libraries/SSHKeywords.robot
Resource ${CURDIR}/../../../libraries/Utils.robot
Variables ${CURDIR}/../../../variables/Variables.py
*** Variables ***
${datadir} ${CURDIR}/../../../variables/netconf/MDSAL
${dataext} msg
${ssh_netconf_pid} -1
*** Test Cases ***
Connect_To_ODL_Netconf
[Documentation] Connect to ODL Netconf and fail if that is not possible.
Create_ODL_Netconf_Connection
Open_ODL_Netconf_Connection
Get_Config_Running
[Documentation] Make sure the configuration has only the default elements in it.
Check_Test_Objects_Not_Present_In_Config get-config
Missing_Message_ID_Attribute
[Documentation] Check that messages with missing "message-ID" attribute are rejected with the correct error (RFC 6241, section 4.1).
Perform_Test missing-attr
Additional_Attributes_In_Message
[Documentation] Check that additional attributes in messages are returned properly (RFC 6241, sections 4.1 and 4.2).
${reply}= Load_And_Send_Message additional-attr
BuiltIn.Should_Contain ${reply} xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"
BuiltIn.Should_Contain ${reply} message-id="1"
BuiltIn.Should_Contain ${reply} attribute="something"
BuiltIn.Should_Contain ${reply} additional="otherthing"
BuiltIn.Should_Contain ${reply} xmlns:prefix="http://www.example.com/my-schema-example.html"
Edit_Config_Modules_Merge
[Documentation] Request a "merge" operation adding an element in candidate configuration and check the reply.
Perform_Test config-modules-merge-1
Get_Config_Running_To_Confirm_No_Edit_Before_Commit
[Documentation] Make sure the running configuration is still unchanged as the change was not commited yet.
Check_Test_Objects_Not_Present_In_Config get-config-no-edit-before-commit
Commit_Edit
[Documentation] Commit the change and check the reply.
Perform_Test commit-edit
name0_In_Config_Running_To_Confirm_Edit_After_Commit
[Documentation] Check that the change is now in the configuration.
${reply}= Load_And_Send_Message get-config-edit-after-commit
BuiltIn.Should_Contain ${reply} name0
name0_In_Config_Modules_Via_Restconf
[Documentation] Check that the change is also visible through Restconf.
${data}= Utils.Get_Data_From_URI config config:modules headers=${ACCEPT_XML}
BuiltIn.Should_Contain ${data} name0
Terminate_Connection_Gracefully
[Documentation] Close the session and disconnect.
Close_ODL_Netconf_Connection_Gracefully
name0_In_Config_Modules_Via_Restconf_After_Disconnect
[Documentation] Check that the change is still visible through Restconf after Netconf disconnect.
${data}= Utils.Get_Data_From_URI config config:modules headers=${ACCEPT_XML}
BuiltIn.Should_Contain ${data} name0
Reconnect_To_ODL_Netconf_After_Graceful_Session_End
[Documentation] Reconnect to ODL Netconf and fail if that is not possible.
Open_ODL_Netconf_Connection
name0_In_Config_Running_After_Reconnect
[Documentation] Check that the change is now in the configuration.
${reply}= Load_And_Send_Message get-config-edit-after-commit
BuiltIn.Should_Contain ${reply} name0
name0_In_Config_Modules_Via_Restconf_After_Reconnect
[Documentation] Check that the change is still visible through Restconf after Netconf reconnect.
${data}= Utils.Get_Data_From_URI config config:modules headers=${ACCEPT_XML}
BuiltIn.Should_Contain ${data} name0
Edit_Config_Modules_Create_Shall_Fail_Now
[Documentation] Request a "create" operation of an element that already exists and check that it fails with the correct error (RFC 6241, section 7.2, operation "create").
Perform_Test config-modules-create
Delete_Modules
[Documentation] Delete the created element from the candidate configuration and check the reply.
Perform_Test config-modules-delete
Get_Config_Running_To_Confirm_No_Delete_Before_Commit
[Documentation] Make sure the element is still present in the running configuration as the delete command was not committed yet.
${reply}= Load_And_Send_Message get-config-no-delete-before-commit
BuiltIn.Should_Contain ${reply} name0
Commit_Delete
[Documentation] Commit the deletion of the element and check the reply.
Perform_Test commit-delete
Get_Config_Running_To_Confirm_Delete_After_Commit
[Documentation] Check that the element is gone.
Check_Test_Objects_Not_Present_In_Config get-config-delete-after-commit
Restconf_Get_Modules_Shall_Return_404
[Documentation] Check that "Not Found" is returned when Restconf is asked for the deleted element.
${response}= RequestsLibrary.Get config config:modules ${ACCEPT_XML}
BuiltIn.Should_Be_Equal_As_Strings 404 ${response.status_code}
Commit_No_Transaction
[Documentation] Attempt to perform "commit" when there are no changes in the candidate configuration and check that it returns OK status.
Perform_Test commit-no-transaction
Edit_Config_Another_Modules_Merge_For_Discard
[Documentation] Create an element to be discarded and check the reply.
Perform_Test config-modules-merge-2
Get_And_Check_Config_Candidate_For_Discard
[Documentation] Check that the element to be discarded is present in the candidate configuration.
${reply}= Load_And_Send_Message get-config-candidate
BuiltIn.Should_Contain ${reply} name1
BuiltIn.Should_Not_Contain ${reply} name0
Discard_Changes_Using_Discard_Request
[Documentation] Ask the server to discard the candidate and check the reply.
Perform_Test commit-discard
Get_And_Check_Config_Candidate_To_Confirm_Discard
[Documentation] Check that the element was really discarded.
Check_Test_Objects_Not_Present_In_Config get-config-candidate-discard
Edit_Config_Modules_Multiple_Modules_Merge_1
[Documentation] Create the element with "name2" subelement again and check the reply.
Perform_Test merge-multiple-1
Edit_Config_Modules_Multiple_Modules_Merge_2
[Documentation] Add a "name3" subelement to the element and check the reply.
Perform_Test merge-multiple-2
Edit_Config_Modules_Multiple_Modules_Merge_3
[Documentation] Add a "name4" subelement to the element and check the reply.
Perform_Test merge-multiple-3
Commit_Multiple_Modules_Merge
[Documentation] Commit the changes and check the reply.
Perform_Test merge-multiple-commit
name2_name3_name4_In_Running_Config
[Documentation] Check that the 3 subelements are now present in the running configuration.
${reply}= Load_And_Send_Message merge-multiple-check
BuiltIn.Should_Contain ${reply} name2
BuiltIn.Should_Contain ${reply} name3
BuiltIn.Should_Contain ${reply} name4
name2_name3_name4_In_Config_Modules_Via_Restconf
[Documentation] Check that the 3 subelements are visible via Restconf.
${data}= Utils.Get_Data_From_URI config config:modules headers=${ACCEPT_XML}
BuiltIn.Should_Contain ${data} name2
BuiltIn.Should_Contain ${data} name3
BuiltIn.Should_Contain ${data} name4
Abort_Connection_To_Simulate_Session_Failure
[Documentation] Simulate session failure by disconnecting without terminating the session.
Abort_ODL_Netconf_Connection
name2_name3_name4_In_Config_Modules_Via_Restconf_After_Session_Fail
[Documentation] Check that the 3 subelements are visible via Restconf.
${data}= Utils.Get_Data_From_URI config config:modules headers=${ACCEPT_XML}
BuiltIn.Should_Contain ${data} name2
BuiltIn.Should_Contain ${data} name3
BuiltIn.Should_Contain ${data} name4
Reconnect_To_ODL_Netconf_After_Session_Failure
[Documentation] Reconnect to ODL Netconf and fail if that is not possible.
Open_ODL_Netconf_Connection
name2_name3_name4_In_Running_Config_After_Session_Failure
[Documentation] Check that the 3 subelements are now present in the running configuration.
${reply}= Load_And_Send_Message merge-multiple-check
BuiltIn.Should_Contain ${reply} name2
BuiltIn.Should_Contain ${reply} name3
BuiltIn.Should_Contain ${reply} name4
Edit_Multiple_Modules_Merge
[Documentation] Add another subelement named "test" to the element and check the reply.
Perform_Test merge-multiple-edit
Commit_Multiple_Modules_Merge_Edit
[Documentation] Commit the addition of the "test" subelement and check the reply.
Perform_Test merge-multiple-edit-commit
Check_Multiple_Modules_Merge_Edit
[Documentation] Check that the "test" subelement exists and has correct value for "port" subelement.
${reply}= Load_And_Send_Message merge-multiple-edit-check
BuiltIn.Should_Contain ${reply} 2022
Update_Multiple_Modules_Merge
[Documentation] Update the value of the "port" subelement of the "test" subelement and check the reply.
Perform_Test merge-multiple-update
Commit_Multiple_Modules_Merge_Update
[Documentation] Commit the update and check the reply.
Perform_Test merge-multiple-update-commit
Check_Multiple_Modules_Merge_Update
[Documentation] Check that the value of the "port" was really updated.
${reply}= Load_And_Send_Message merge-multiple-update-check
BuiltIn.Should_Contain ${reply} 3000
Replace_Multiple_Modules_Merge
[Documentation] Replace the content of the "test" with another completely different and check the reply.
Perform_Test merge-multiple-replace
Commit_Multiple_Modules_Merge_Replace
[Documentation] Commit the replace and check the reply.
Perform_Test merge-multiple-replace-commit
Check_Multiple_Modules_Merge_Replace
[Documentation] Check that the new content is there and the old content is gone.
${reply}= Load_And_Send_Message merge-multiple-replace-check
BuiltIn.Should_Contain ${reply} test
BuiltIn.Should_Contain ${reply}
10.194.132.42
BuiltIn.Should_Contain ${reply} false
BuiltIn.Should_Contain ${reply} 4000
BuiltIn.Should_Contain ${reply} admin
BuiltIn.Should_Contain ${reply} admin
BuiltIn.Should_Not_Contain ${reply} global-event-executor
BuiltIn.Should_Not_Contain ${reply} binding-osgi-broker
BuiltIn.Should_Not_Contain ${reply} dom-broker
BuiltIn.Should_Not_Contain ${reply} global-netconf-dispatcher
BuiltIn.Should_Not_Contain ${reply} global-netconf-processing-executor
Remove_Multiple_Modules
[Documentation] Remove the testing "module" element and all its subelements and check the reply.
Perform_Test merge-multiple-remove
Commit_Multiple_Modules_Removal
[Documentation] Commit the removal and check the reply.
Perform_Test merge-multiple-remove-commit
Delete_Not_Existing_Module
[Documentation] Attempt to delete the "module" element again and check that it fails with the correct error.
Perform_Test delete-not-existing
Commit_Delete_Not_Existing_Module
[Documentation] Attempt to commit and check the reply.
Perform_Test commit-no-transaction
Remove_Not_Existing_Module
[Documentation] Attempt to remove the "module" element again and check that the operation is "silently ignored".
Perform_Test remove-not-existing
Commit_Remove_Not_Existing_Module
[Documentation] Attempt to commit and check the reply.
Perform_Test remove-not-existing-commit
Close_Session
[Documentation] Close the session and check that it was closed properly.
Perform_Test close-session
*** Keywords ***
Get_Data
[Arguments] ${name}
[Documentation] Load the specified data from the data directory and return it.
${data}= OperatingSystem.Get_File ${datadir}${/}${name}.${dataext}
[Return] ${data}
Create_ODL_Netconf_Connection
[Arguments] ${host}=${CONTROLLER} ${port}=${ODL_NETCONF_PORT} ${user}=${ODL_NETCONF_USER} ${password}=${ODL_NETCONF_PASSWORD}
[Documentation] Open a netconf connecion to the given machine.
# The "-s netconf" flag (see the "SSHLibrary.Write" line below) is not
# supported by SSHLibrary, therefore we need to use this elaborate and
# pretty tricky way to connect to the ODL Netconf port.
# TODO: Extract into NetconfKeywords as there are other tests that are
# going to need to use this operation (Netconf Performance and Scaling
# comes to my mind now as one of the things tested is the performance
# of the direct netconf connection.
# TODO: Make this keyword return a dictionary object with all the
# data about the prepared connection neatly packaged. Make all
# the other keywords handling the connection accept such an
# object and pull the data out of it rather than relying on
# global variables. This will allow for tracking more Netconf
# connections, increasing utility.
${control}= SSHLibrary.Open_Connection ${host} prompt=${ODL_SYSTEM_PROMPT} timeout=10s
Utils.Flexible_Controller_Login
BuiltIn.Set_Suite_Variable ${ssh_control} ${control}
${netconf}= SSHLibrary.Open_Connection ${host} prompt=${ODL_SYSTEM_PROMPT} timeout=10s
Utils.Flexible_Controller_Login
BuiltIn.Set_Suite_Variable ${ssh_netconf} ${netconf}
BuiltIn.Set_Suite_Variable ${ssh_port} ${port}
BuiltIn.Set_Suite_Variable ${ssh_user} ${user}
BuiltIn.Set_Suite_Variable ${ssh_password} ${password}
Reopen_ODL_Netconf_Connection
[Documentation] Reopen a closed netconf connection.
SSHLibrary.Write sshpass -p ${ssh_password} ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ${ssh_user}\@127.0.0.1 -p ${ssh_port} -s netconf
${hello}= SSHLibrary.Read_Until ${ODL_NETCONF_PROMPT}
SSHLibrary.Switch_Connection ${ssh_control}
${pid}= SSHLibrary.Execute_Command ps -A | grep sshpass | cut -b 1-6
BuiltIn.Set_Suite_Variable ${ssh_netconf_pid} ${pid}
SSHLibrary.Switch_Connection ${ssh_netconf}
[Return] ${hello}
Open_ODL_Netconf_Connection
[Documentation] Open a prepared netconf connecion.
${hello}= Reopen_ODL_Netconf_Connection
${hello_message}= Get_Data hello
Transmit_Message ${hello_message}
[Return] ${hello}
Transmit_Message
[Arguments] ${message}
[Documentation] Transmit message to Netconf connection and discard the echo of the message.
SSHLibrary.Write ${message}
SSHLibrary.Write ${ODL_NETCONF_PROMPT}
SSHLibrary.Read_Until ${ODL_NETCONF_PROMPT}
Send_Message
[Arguments] ${message}
[Documentation] Send message to Netconf connection and get the reply.
Transmit_Message ${message}
${reply}= SSHLibrary.Read_Until ${ODL_NETCONF_PROMPT}
[Return] ${reply}
Prepare_For_Search
[Arguments] ${searched_string}
[Documentation] Prepare the specified string for searching in Netconf connection replies.
... The string passed to this keyword is coming from a data
... file which has different end of line conventions than
... the actual Netconf reply. This keyword patches the string
... to match what Netconf actually returns.
${result}= BuiltIn.Evaluate "\\r\\n".join("""${searched_string}""".split("\\n"))
[Return] ${result}
Load_And_Send_Message
[Arguments] ${name}
[Documentation] Load a message from the data file set, send it to Netconf and return the reply.
${request}= Get_Data ${name}-request
${reply}= Send_Message ${request}
[Return] ${reply}
Load_Expected_Reply
[Arguments] ${name}
[Documentation] Load the expected reply from the data file set and return it.
${expected_reply}= Get_Data ${name}-reply
${expected}= Prepare_For_Search ${expected_reply}
[Return] ${expected}
Abort_ODL_Netconf_Connection
[Documentation] Correctly close the Netconf connection and make sure it is really dead.
BuiltIn.Return_From_Keyword_If ${ssh_netconf_pid} == -1
${kill_command}= BuiltIn.Set_Variable kill ${ssh_netconf_pid}
BuiltIn.Set_Suite_Variable ${ssh_netconf_pid} -1
SSHLibrary.Switch_Connection ${ssh_control}
SSHLibrary.Write ${kill_command}
SSHLibrary.Read_Until_Prompt
SSHLibrary.Switch_Connection ${ssh_netconf}
SSHLibrary.Read_Until_Prompt
Close_ODL_Netconf_Connection_Gracefully
Perform_Test close-session
Abort_ODL_Netconf_Connection
Setup_Everything
[Documentation] Setup resources and create session for Restconf checking.
SetupUtils.Setup_Utils_For_Setup_And_Teardown
RequestsLibrary.Create_Session config http://${CONTROLLER}:${RESTCONFPORT}${CONFIG_API} auth=${AUTH}
Teardown_Everything
[Documentation] Close the Netconf connection and destroy all sessions in the requests library.
Abort_ODL_Netconf_Connection
RequestsLibrary.Delete_All_Sessions
Check_Test_Objects_Not_Present_In_Config
[Arguments] ${name}
[Documentation] Use dataset with the specified name to get the configuration and check that none of our test objects are there.
${reply}= Load_And_Send_Message ${name}
BuiltIn.Should_Not_Contain ${reply} name0
BuiltIn.Should_Not_Contain ${reply} name1
BuiltIn.Should_Not_Contain ${reply} name2
BuiltIn.Should_Not_Contain ${reply} name3
BuiltIn.Should_Not_Contain ${reply} name4
Perform_Test
[Arguments] ${name}
[Documentation] Load and send the request from the dataset and compare the returned reply to the one stored in the dataset.
${actual}= Load_And_Send_Message ${name}
${expected}= Load_Expected_Reply ${name}
${newline}= BuiltIn.Evaluate "\\r\\n"
BuiltIn.Should_Be_Equal ${newline}${expected}${ODL_NETCONF_PROMPT} ${actual}
[Return] ${actual}
Send_And_Check
[Arguments] ${name} ${expected}
${actual}= Load_And_Send_Message ${name}
BuiltIn.Should_Be_Equal ${expected} ${actual}