module org-openroadm-optical-transport-interfaces { namespace "http://org/openroadm/optical-transport-interfaces"; prefix org-openroadm-optical-transport-interfaces; import org-openroadm-device { prefix org-openroadm-device; revision-date 2018-10-19; } import org-openroadm-interfaces { prefix openROADM-if; revision-date 2017-06-26; } import org-openroadm-common-types { prefix org-openroadm-common-types; revision-date 2018-10-19; } organization "Open ROADM MSA"; contact "OpenROADM.org"; description "This module contains YANG definitions for the Optical Transport Interfaces. Copyright of the Members of the Open ROADM MSA Agreement dated (c) 2016, AT&T Intellectual Property. All other rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the Members of the Open ROADM MSA Agreement nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE MEMBERS OF THE OPEN ROADM MSA AGREEMENT ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT THE MEMBERS OF THE OPEN ROADM MSA AGREEMENT BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Also contains code components extracted from IETF Interfaces. These code components are copyrighted and licensed as follows: Copyright (c) 2016 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust’s Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License."; revision 2018-10-19 { description "Version 2.2.1"; } revision 2017-12-15 { description "Version 2.2"; } revision 2017-09-29 { description "Version 2.1"; } revision 2017-07-28 { description "Version 2.0.1 - added revision-date to imports"; } revision 2017-06-26 { description "Version 2.0"; } revision 2016-10-14 { description "Version 1.2"; } grouping ots-attributes { description "Optical Transport Section (OTS) attributes"; leaf fiber-type { type enumeration { enum "smf" { value 0; description "Single Mode Fiber"; } enum "eleaf" { value 1; description "ELEAF"; } enum "oleaf" { value 2; description "OLEAF"; } enum "dsf" { value 3; description "DSF"; } enum "truewave" { value 4; description "TRUEWAVE Reduced Slope"; } enum "truewavec" { value 5; description "TRUEWAVE Classic"; } enum "nz-dsf" { value 6; description "NZ-DSF"; } enum "ull" { value 7; description "Ultra Low Loss (ULL)"; } } default "smf"; description "fiber type Default : SMF "; } leaf span-loss-receive { type org-openroadm-common-types:ratio-dB; description "Span loss on the receiver side. Set by the controller and used by device to set AMP gain."; } leaf span-loss-transmit { type org-openroadm-common-types:ratio-dB; description "Span loss on the transmitter side. Set by the controller and used by device to configure MSA compliant channel launch power"; } leaf ingress-span-loss-aging-margin { type org-openroadm-common-types:ratio-dB; default "0"; config true; description "Span-loss margin used to set optical amplifier gain and output-voa. Day one attenuation of the link, at initial commissioning may increase across wdm link life. span-loss-aging-margin defines the maximum additional loss the wdm link may experience in addition to initial loss without requiring a new design (new amplifier settings). "; } leaf eol-max-load-pIn { type org-openroadm-common-types:power-dBm; config true; description "End Of Life Total input power at maximum load used for amplifier control. Calculated during the design, this value shall be used by the amplifier device for the setting so that the reasonable margin is kept to reach this value at the end of life of the wdm link, considering span-loss aging margins are reached "; } } grouping ots-container { container ots { description "Optical Transport Section (OTS): Models the optical interfaces for an Optical White Box. The network side is represented by the OTS/OMS."; uses ots-attributes; } } augment "/org-openroadm-device:org-openroadm-device/org-openroadm-device:interface" { when "org-openroadm-device:type = 'openROADM-if:opticalTransport'"; uses ots-container; } }