2 Documentation BGP performance of ingesting from 1 iBGP peer, data change counter is NOT used.
4 ... Copyright (c) 2015 Cisco Systems, Inc. and others. All rights reserved.
6 ... This program and the accompanying materials are made available under the
7 ... terms of the Eclipse Public License v1.0 which accompanies this distribution,
8 ... and is available at http://www.eclipse.org/legal/epl-v10.html
11 ... This suite uses play.py as single iBGP peer.
12 ... The suite only looks at example-ipv4-topology, so RIB is not examined.
14 ... The suite consists of two halves, differing on which side initiates BGP connection.
15 ... State of "work is being done" is detected by increasing value of prefixes in topology.
16 ... The time for Wait_For_Stable_* cases to finish is the main performance metric.
17 ... After waiting for stability is done, full check on number of prefixes present is performed.
19 ... Brief description how to configure BGP peer can be found here:
20 ... https://wiki.opendaylight.org/view/BGP_LS_PCEP:User_Guide#BGP_Peer
21 ... http://docs.opendaylight.org/en/stable-boron/user-guide/bgp-user-guide.html#bgp-peering
23 ... TODO: Currently, if a bug causes prefix count to remain at zero,
24 ... affected test cases will wait for max time. Reconsider.
25 ... If zero is allowed as stable, higher period or repetitions would be required.
27 ... The prefix counting is quite heavyweight and may induce large variation in time.
28 ... Try the other version of the suite (singlepeer_changecount.robot) to get better precision.
29 Suite Setup Setup_Everything
30 Suite Teardown Teardown_Everything
31 Test Setup SetupUtils.Setup_Test_With_Logging_And_Fast_Failing
32 Test Teardown SetupUtils.Teardown_Test_Show_Bugs_And_Start_Fast_Failing_If_Test_Failed
33 Library SSHLibrary timeout=10s
34 Library RequestsLibrary
35 Resource ../../../libraries/BGPSpeaker.robot
36 Resource ../../../libraries/FailFast.robot
37 Resource ../../../libraries/KillPythonTool.robot
38 Resource ../../../libraries/PrefixCounting.robot
39 Resource ../../../libraries/SetupUtils.robot
40 Resource ../../../libraries/SSHKeywords.robot
41 Resource ../../../libraries/TemplatedRequests.robot
42 Resource ../../../libraries/Utils.robot
43 Resource ../../../variables/Variables.robot
46 ${BGP_TOOL_LOG_LEVEL} info
47 ${BGP_VARIABLES_FOLDER} ${CURDIR}/../../../variables/bgpuser/
49 ${CHECK_PERIOD_PREFIX_COUNT} ${CHECK_PERIOD}
50 ${CHECK_PERIOD_PREFIX_COUNT_SINGLE} ${CHECK_PERIOD_PREFIX_COUNT}
52 ${COUNT_PREFIX_COUNT} ${COUNT}
53 ${COUNT_PREFIX_COUNT_SINGLE} ${COUNT_PREFIX_COUNT}
55 ${HOLDTIME_PREFIX_COUNT} ${HOLDTIME}
56 ${HOLDTIME_PREFIX_COUNT_SINGLE} ${HOLDTIME_PREFIX_COUNT}
60 ${REPETITIONS_PREFIX_COUNT} ${REPETITIONS}
61 ${REPETITIONS_PREFIX_COUNT_SINGLE} ${REPETITIONS_PREFIX_COUNT}
62 ${RESULTS_FILE_NAME} bgp.csv
63 ${TEST_DURATION_MULTIPLIER} 1
64 ${TEST_DURATION_MULTIPLIER_PREFIX_COUNT} ${TEST_DURATION_MULTIPLIER}
65 ${TEST_DURATION_MULTIPLIER_PREFIX_COUNT_SINGLE} ${TEST_DURATION_MULTIPLIER_PREFIX_COUNT}
68 ${RIB_INSTANCE} example-bgp-rib
69 ${PROTOCOL_OPENCONFIG} ${RIB_INSTANCE}
70 ${DEVICE_NAME} controller-config
71 ${BGP_PEER_NAME} example-bgp-peer
72 # TODO: Option names can be better.
75 Check_For_Empty_Ipv4_Topology_Before_Talking
76 [Documentation] Wait for example-ipv4-topology to come up and empty. Give large timeout for case when BGP boots slower than restconf.
78 # TODO: Choose which tags to assign and make sure they are assigned correctly.
79 BuiltIn.Wait_Until_Keyword_Succeeds 120s 1s PrefixCounting.Check_Ipv4_Topology_Is_Empty
81 Reconfigure_ODL_To_Accept_Connection
82 [Documentation] Configure BGP peer module with initiate-connection set to false.
83 &{mapping} Create Dictionary DEVICE_NAME=${DEVICE_NAME} BGP_NAME=${BGP_PEER_NAME} IP=${TOOLS_SYSTEM_IP} HOLDTIME=${HOLDTIME_PREFIX_COUNT_SINGLE} PEER_PORT=${BGP_TOOL_PORT}
84 ... INITIATE=false BGP_RIB=${RIB_INSTANCE} PASSIVE_MODE=true BGP_RIB_OPENCONFIG=${PROTOCOL_OPENCONFIG} RIB_INSTANCE_NAME=${RIB_INSTANCE}
85 TemplatedRequests.Put_As_Xml_Templated ${BGP_VARIABLES_FOLDER}${/}bgp_peer mapping=${mapping}
87 Start_Talking_BGP_Speaker
88 [Documentation] Start Python speaker to connect to ODL.
89 # Myport value is needed for checking whether connection at precise port was established.
90 BGPSpeaker.Start_BGP_Speaker --amount ${COUNT_PREFIX_COUNT_SINGLE} --myip=${TOOLS_SYSTEM_IP} --myport=${BGP_TOOL_PORT} --peerip=${ODL_SYSTEM_IP} --peerport=${ODL_BGP_PORT} --insert=${INSERT} --withdraw=${WITHDRAW} --prefill ${PREFILL} --update ${UPDATE} --${BGP_TOOL_LOG_LEVEL} --results ${RESULTS_FILE_NAME}
92 Wait_For_Stable_Talking_Ipv4_Topology
93 [Documentation] Wait until example-ipv4-topology becomes stable. This is done by checking stability of prefix count.
94 PrefixCounting.Wait_For_Ipv4_Topology_Prefixes_To_Become_Stable timeout=${bgp_filling_timeout} period=${CHECK_PERIOD_PREFIX_COUNT_SINGLE} repetitions=${REPETITIONS_PREFIX_COUNT_SINGLE} excluded_count=0
96 Check_Talking_Ipv4_Topology_Count
97 [Documentation] Count the routes in example-ipv4-topology and fail if the count is not correct.
99 [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
100 PrefixCounting.Check_Ipv4_Topology_Count ${COUNT_PREFIX_COUNT_SINGLE}
102 Kill_Talking_BGP_Speaker
103 [Documentation] Abort the Python speaker. Also, attempt to stop failing fast.
105 [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
106 BGPSpeaker.Kill_BGP_Speaker
107 FailFast.Do_Not_Fail_Fast_From_Now_On
108 # NOTE: It is still possible to remain failing fast, if both previous and this test have failed.
109 [Teardown] SetupUtils.Teardown_Test_Show_Bugs_If_Test_Failed
111 Store_Results_For_Talking_BGP_Speaker
112 [Documentation] Store results for plotting
113 [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
114 Store_File_To_Workspace totals-${RESULTS_FILE_NAME} totals-${RESULTS_FILE_NAME}
115 Store_File_To_Workspace performance-${RESULTS_FILE_NAME} performance-${RESULTS_FILE_NAME}
116 Store_File_To_Workspace totals-${RESULTS_FILE_NAME} prefixcount-talking-totals-${RESULTS_FILE_NAME}
117 Store_File_To_Workspace performance-${RESULTS_FILE_NAME} prefixcount-talking-performance-${RESULTS_FILE_NAME}
119 Wait_For_Stable_Ipv4_Topology_After_Talking
120 [Documentation] Wait until example-ipv4-topology becomes stable again.
122 # TODO: Is is possible to have failed at Check_Talking_Ipv4_Topology_Count and still have initial period of constant count?
123 # FIXME: If yes, do count here to get the initial value and use it (if nonzero).
124 # TODO: If yes, decide whether access to the FailFast state should have keyword or just variable name.
125 PrefixCounting.Wait_For_Ipv4_Topology_Prefixes_To_Become_Stable timeout=${bgp_filling_timeout} period=${CHECK_PERIOD_PREFIX_COUNT_SINGLE} repetitions=${REPETITIONS_PREFIX_COUNT_SINGLE} excluded_count=${COUNT_PREFIX_COUNT_SINGLE}
127 Check_For_Empty_Ipv4_Topology_After_Talking
128 [Documentation] Example-ipv4-topology should be empty now.
130 [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
131 PrefixCounting.Check_Ipv4_Topology_Is_Empty
133 Start_Listening_BGP_Speaker
134 [Documentation] Start Python speaker in listening mode.
135 BGPSpeaker.Start_BGP_Speaker --amount ${COUNT_PREFIX_COUNT_SINGLE} --listen --myip=${TOOLS_SYSTEM_IP} --myport=${BGP_TOOL_PORT} --peerip=${ODL_SYSTEM_IP} --insert=${INSERT} --withdraw=${WITHDRAW} --prefill ${PREFILL} --update ${UPDATE} --${BGP_TOOL_LOG_LEVEL} --results ${RESULTS_FILE_NAME}
137 Reconfigure_ODL_To_Initiate_Connection
138 [Documentation] Replace BGP peer config module, now with initiate-connection set to true.
139 &{mapping} Create Dictionary DEVICE_NAME=${DEVICE_NAME} BGP_NAME=${BGP_PEER_NAME} IP=${TOOLS_SYSTEM_IP} HOLDTIME=${HOLDTIME_PREFIX_COUNT_SINGLE} PEER_PORT=${BGP_TOOL_PORT}
140 ... INITIATE=true BGP_RIB=${RIB_INSTANCE} PASSIVE_MODE=false BGP_RIB_OPENCONFIG=${PROTOCOL_OPENCONFIG} RIB_INSTANCE_NAME=${RIB_INSTANCE}
141 TemplatedRequests.Put_As_Xml_Templated ${BGP_VARIABLES_FOLDER}${/}bgp_peer mapping=${mapping}
143 Wait_For_Stable_Listening_Ipv4_Topology
144 [Documentation] Wait until example-ipv4-topology becomes stable.
145 PrefixCounting.Wait_For_Ipv4_Topology_Prefixes_To_Become_Stable timeout=${bgp_filling_timeout} period=${CHECK_PERIOD_PREFIX_COUNT_SINGLE} repetitions=${REPETITIONS_PREFIX_COUNT_SINGLE} excluded_count=0
147 Check_Listening_Ipv4_Topology_Count
148 [Documentation] Count the routes in example-ipv4-topology and fail if the count is not correct.
150 [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
151 PrefixCounting.Check_Ipv4_Topology_Count ${COUNT_PREFIX_COUNT_SINGLE}
153 Kill_Listening_BGP_Speaker
154 [Documentation] Abort the Python speaker. Also, attempt to stop failing fast.
156 [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
157 BGPSpeaker.Kill_BGP_Speaker
158 FailFast.Do_Not_Fail_Fast_From_Now_On
159 # NOTE: It is still possible to remain failing fast, if both previous and this test have failed.
160 [Teardown] SetupUtils.Teardown_Test_Show_Bugs_If_Test_Failed
162 Store_Results_For_Listening_BGP_Speaker
163 [Documentation] Store results for plotting
164 [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
165 Store_File_To_Workspace totals-${RESULTS_FILE_NAME} totals-${RESULTS_FILE_NAME}
166 Store_File_To_Workspace performance-${RESULTS_FILE_NAME} performance-${RESULTS_FILE_NAME}
167 Store_File_To_Workspace totals-${RESULTS_FILE_NAME} prefixcount-listening-totals-${RESULTS_FILE_NAME}
168 Store_File_To_Workspace performance-${RESULTS_FILE_NAME} prefixcount-listening-performance-${RESULTS_FILE_NAME}
170 Wait_For_Stable_Ipv4_Topology_After_Listening
171 [Documentation] Wait until example-ipv4-topology becomes stable again.
173 PrefixCounting.Wait_For_Ipv4_Topology_Prefixes_To_Become_Stable timeout=${bgp_filling_timeout} period=${CHECK_PERIOD_PREFIX_COUNT_SINGLE} repetitions=${REPETITIONS_PREFIX_COUNT_SINGLE} excluded_count=${COUNT_PREFIX_COUNT_SINGLE}
175 Check_For_Empty_Ipv4_Topology_After_Listening
176 [Documentation] Example-ipv4-topology should be empty now.
178 [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
179 PrefixCounting.Check_Ipv4_Topology_Is_Empty
181 Delete_Bgp_Peer_Configuration
182 [Documentation] Revert the BGP configuration to the original state: without any configured peers.
183 [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
184 &{mapping} BuiltIn.Create_Dictionary DEVICE_NAME=${DEVICE_NAME} BGP_NAME=${BGP_PEER_NAME} IP=${TOOLS_SYSTEM_IP} BGP_RIB_OPENCONFIG=${PROTOCOL_OPENCONFIG}
185 TemplatedRequests.Delete_Templated ${BGP_VARIABLES_FOLDER}${/}bgp_peer mapping=${mapping}
189 [Documentation] Setup imported resources, SSH-login to tools system,
190 ... create HTTP session, put Python tool to tools system.
191 SetupUtils.Setup_Utils_For_Setup_And_Teardown
192 TemplatedRequests.Create_Default_Session
193 PrefixCounting.PC_Setup
194 RequestsLibrary.Create_Session operational http://${ODL_SYSTEM_IP}:${RESTCONFPORT} auth=${AUTH} timeout=125 max_retries=0
195 # TODO: Do not include slash in ${OPERATIONAL_TOPO_API}, having it typed here is more readable.
196 # TODO: Alternatively, create variable in Variables which starts with http.
197 # Both TODOs would probably need to update every suite relying on current Variables.
198 SSHLibrary.Set_Default_Configuration prompt=${TOOLS_SYSTEM_PROMPT}
199 SSHLibrary.Open_Connection ${TOOLS_SYSTEM_IP}
200 SSHKeywords.Flexible_Mininet_Login
201 SSHKeywords.Require_Python
202 SSHKeywords.Assure_Library_Ipaddr target_dir=.
203 SSHLibrary.Put_File ${CURDIR}/../../../../tools/fastbgp/play.py
204 # Calculate the timeout value based on how many routes are going to be pushed
205 # TODO: Replace 20 with some formula from period and repetitions.
206 ${timeout} = BuiltIn.Evaluate ${TEST_DURATION_MULTIPLIER_PREFIX_COUNT_SINGLE} * (${COUNT_PREFIX_COUNT_SINGLE} * 9.0 / 10000 + 20)
207 Builtin.Set_Suite_Variable ${bgp_filling_timeout} ${timeout}
210 [Documentation] Make sure Python tool was killed and tear down imported Resources.
211 # Environment issue may have dropped the SSH connection, but we do not want Teardown to fail.
212 BuiltIn.Run_Keyword_And_Ignore_Error KillPythonTool.Search_And_Kill_Remote_Python 'play\.py'
213 BuiltIn.Run_Keyword_And_Ignore_Error Utils.Get_Sysstat_Statistics
214 RequestsLibrary.Delete_All_Sessions
215 SSHLibrary.Close_All_Connections
217 Store_File_To_Workspace
218 [Arguments] ${src_file_name} ${dst_file_name}
219 [Documentation] Store the provided file from the SSH client to workspace.
220 ${files}= SSHLibrary.List Files In Directory .
221 ${output_log}= SSHLibrary.Execute_Command cat ${src_file_name}
222 BuiltIn.Log ${output_log}
223 Create File ${dst_file_name} ${output_log}