2 Documentation BGP performance of ingesting from 1 iBGP peer, data change counter is NOT used.
4 ... Copyright (c) 2015 Cisco Systems, Inc. and others. All rights reserved.
6 ... This program and the accompanying materials are made available under the
7 ... terms of the Eclipse Public License v1.0 which accompanies this distribution,
8 ... and is available at http://www.eclipse.org/legal/epl-v10.html
11 ... This suite uses play.py as single iBGP peer.
12 ... The suite only looks at example-ipv4-topology, so RIB is not examined.
14 ... The suite consists of two halves, differing on which side initiates BGP connection.
15 ... State of "work is being done" is detected by increasing value of prefixes in topology.
16 ... The time for Wait_For_Stable_* cases to finish is the main performance metric.
17 ... After waiting for stability is done, full check on number of prefixes present is performed.
19 ... TODO: Currently, if a bug causes prefix count to remain at zero,
20 ... affected test cases will wait for max time. Reconsider.
21 ... If zero is allowed as stable, higher period or repetitions would be required.
23 ... The prefix counting is quite heavyweight and may induce large variation in time.
24 ... Try the other version of the suite (singlepeer_changecount.robot) to get better precision.
25 Suite Setup Setup_Everything
26 Suite Teardown Teardown_Everything
27 Test Setup SetupUtils.Setup_Test_With_Logging_And_Fast_Failing
28 Test Teardown FailFast.Start_Failing_Fast_If_This_Failed
29 Library SSHLibrary timeout=10s
30 Library RequestsLibrary
31 Variables ${CURDIR}/../../../variables/Variables.py
32 Resource ${CURDIR}/../../../libraries/BGPSpeaker.robot
33 Resource ${CURDIR}/../../../libraries/ConfigViaRestconf.robot
34 Resource ${CURDIR}/../../../libraries/FailFast.robot
35 Resource ${CURDIR}/../../../libraries/KillPythonTool.robot
36 Resource ${CURDIR}/../../../libraries/PrefixCounting.robot
37 Resource ${CURDIR}/../../../libraries/SetupUtils.robot
40 ${BGP_VARIABLES_FOLDER} ${CURDIR}/../../../variables/bgpuser/
42 ${HOLDTIME_PREFIX_COUNT} ${HOLDTIME}
44 ${COUNT_PREFIX_COUNT} ${COUNT}
46 ${CHECK_PERIOD_PREFIX_COUNT} ${CHECK_PERIOD}
47 ${REPETITIONS_PREFIX_COUNT} 1
52 ${BGP_TOOL_LOG_LEVEL} info
53 ${CONTROLLER_LOG_LEVEL} INFO
54 ${CONTROLLER_BGP_LOG_LEVEL} DEFAULT
55 ${RESULTS_FILE_NAME} bgp.csv
56 # TODO: Option names can be better.
57 ${last_prefix_count} -1
60 Check_For_Empty_Ipv4_Topology_Before_Talking
61 [Documentation] Wait for example-ipv4-topology to come up and empty. Give large timeout for case when BGP boots slower than restconf.
63 # TODO: Choose which tags to assign and make sure they are assigned correctly.
64 BuiltIn.Wait_Until_Keyword_Succeeds 120s 1s PrefixCounting.Check_Ipv4_Topology_Is_Empty
66 Reconfigure_ODL_To_Accept_Connection
67 [Documentation] Configure BGP peer module with initiate-connection set to false.
68 ${template_as_string} = BuiltIn.Set_Variable {'NAME': 'example-bgp-peer', 'IP': '${TOOLS_SYSTEM_IP}', 'HOLDTIME': '${HOLDTIME_PREFIX_COUNT}', 'PEER_PORT': '${BGP_TOOL_PORT}', 'INITIATE': 'false'}
69 ConfigViaRestconf.Put_Xml_Template_Folder_Config_Via_Restconf ${BGP_VARIABLES_FOLDER}${/}bgp_peer ${template_as_string}
71 Start_Talking_BGP_Speaker
72 [Documentation] Start Python speaker to connect to ODL.
73 # Myport value is needed for checking whether connection at precise port was established.
74 BGPSpeaker.Start_BGP_Speaker --amount ${COUNT_PREFIX_COUNT} --myip=${TOOLS_SYSTEM_IP} --myport=${BGP_TOOL_PORT} --peerip=${ODL_SYSTEM_IP} --peerport=${ODL_BGP_PORT} --insert=${INSERT} --withdraw=${WITHDRAW} --prefill ${PREFILL} --update ${UPDATE} --${BGP_TOOL_LOG_LEVEL} --results ${RESULTS_FILE_NAME}
76 Wait_For_Stable_Talking_Ipv4_Topology
77 [Documentation] Wait until example-ipv4-topology becomes stable. This is done by checking stability of prefix count.
78 PrefixCounting.Wait_For_Ipv4_Topology_Prefixes_To_Become_Stable timeout=${bgp_filling_timeout} period=${CHECK_PERIOD_PREFIX_COUNT} repetitions=${REPETITIONS_PREFIX_COUNT} excluded_count=0
80 Check_Talking_Ipv4_Topology_Count
81 [Documentation] Count the routes in example-ipv4-topology and fail if the count is not correct.
83 PrefixCounting.Check_Ipv4_Topology_Count ${COUNT_PREFIX_COUNT}
85 Kill_Talking_BGP_Speaker
86 [Documentation] Abort the Python speaker. Also, attempt to stop failing fast.
87 [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
88 BGPSpeaker.Kill_BGP_Speaker
89 FailFast.Do_Not_Fail_Fast_From_Now_On
90 # NOTE: It is still possible to remain failing fast, if both previous and this test have failed.
91 [Teardown] FailFast.Do_Not_Start_Failing_If_This_Failed
93 Store_Results_For_Talking_BGP_Speaker
94 [Documentation] Store results for plotting
95 [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
96 Store_File_To_Workspace totals-${RESULTS_FILE_NAME} totals-${RESULTS_FILE_NAME}
97 Store_File_To_Workspace performance-${RESULTS_FILE_NAME} performance-${RESULTS_FILE_NAME}
98 Store_File_To_Workspace totals-${RESULTS_FILE_NAME} prefixcount-talking-totals-${RESULTS_FILE_NAME}
99 Store_File_To_Workspace performance-${RESULTS_FILE_NAME} prefixcount-talking-performance-${RESULTS_FILE_NAME}
101 Wait_For_Stable_Ipv4_Topology_After_Talking
102 [Documentation] Wait until example-ipv4-topology becomes stable again.
104 # TODO: Is is possible to have failed at Check_Talking_Ipv4_Topology_Count and still have initial period of constant count?
105 # FIXME: If yes, do count here to get the initial value and use it (if nonzero).
106 # TODO: If yes, decide whether access to the FailFast state should have keyword or just variable name.
107 PrefixCounting.Wait_For_Ipv4_Topology_Prefixes_To_Become_Stable timeout=${bgp_filling_timeout} period=${CHECK_PERIOD_PREFIX_COUNT} repetitions=${REPETITIONS_PREFIX_COUNT} excluded_count=${COUNT_PREFIX_COUNT}
109 Check_For_Empty_Ipv4_Topology_After_Talking
110 [Documentation] Example-ipv4-topology should be empty now.
112 PrefixCounting.Check_Ipv4_Topology_Is_Empty
114 Start_Listening_BGP_Speaker
115 [Documentation] Start Python speaker in listening mode.
116 BGPSpeaker.Start_BGP_Speaker --amount ${COUNT_PREFIX_COUNT} --listen --myip=${TOOLS_SYSTEM_IP} --myport=${BGP_TOOL_PORT} --peerip=${ODL_SYSTEM_IP} --insert=${INSERT} --withdraw=${WITHDRAW} --prefill ${PREFILL} --update ${UPDATE} --${BGP_TOOL_LOG_LEVEL} --results ${RESULTS_FILE_NAME}
118 Reconfigure_ODL_To_Initiate_Connection
119 [Documentation] Replace BGP peer config module, now with initiate-connection set to true.
120 ${template_as_string} = BuiltIn.Set_Variable {'NAME': 'example-bgp-peer', 'IP': '${TOOLS_SYSTEM_IP}', 'HOLDTIME': '${HOLDTIME_PREFIX_COUNT}', 'PEER_PORT': '${BGP_TOOL_PORT}', 'INITIATE': 'true'}
121 ConfigViaRestconf.Put_Xml_Template_Folder_Config_Via_Restconf ${BGP_VARIABLES_FOLDER}${/}bgp_peer ${template_as_string}
123 Wait_For_Stable_Listening_Ipv4_Topology
124 [Documentation] Wait until example-ipv4-topology becomes stable.
125 PrefixCounting.Wait_For_Ipv4_Topology_Prefixes_To_Become_Stable timeout=${bgp_filling_timeout} period=${CHECK_PERIOD_PREFIX_COUNT} repetitions=${REPETITIONS_PREFIX_COUNT} excluded_count=0
127 Check_Listening_Ipv4_Topology_Count
128 [Documentation] Count the routes in example-ipv4-topology and fail if the count is not correct.
130 PrefixCounting.Check_Ipv4_Topology_Count ${COUNT_PREFIX_COUNT}
132 Kill_Listening_BGP_Speaker
133 [Documentation] Abort the Python speaker. Also, attempt to stop failing fast.
134 [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
135 BGPSpeaker.Kill_BGP_Speaker
136 FailFast.Do_Not_Fail_Fast_From_Now_On
137 # NOTE: It is still possible to remain failing fast, if both previous and this test have failed.
138 [Teardown] FailFast.Do_Not_Start_Failing_If_This_Failed
140 Store_Results_For_Listening_BGP_Speaker
141 [Documentation] Store results for plotting
142 [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
143 Store_File_To_Workspace totals-${RESULTS_FILE_NAME} totals-${RESULTS_FILE_NAME}
144 Store_File_To_Workspace performance-${RESULTS_FILE_NAME} performance-${RESULTS_FILE_NAME}
145 Store_File_To_Workspace totals-${RESULTS_FILE_NAME} prefixcount-listening-totals-${RESULTS_FILE_NAME}
146 Store_File_To_Workspace performance-${RESULTS_FILE_NAME} prefixcount-listening-performance-${RESULTS_FILE_NAME}
148 Wait_For_Stable_Ipv4_Topology_After_Listening
149 [Documentation] Wait until example-ipv4-topology becomes stable again.
151 PrefixCounting.Wait_For_Ipv4_Topology_Prefixes_To_Become_Stable timeout=${bgp_filling_timeout} period=${CHECK_PERIOD_PREFIX_COUNT} repetitions=${REPETITIONS_PREFIX_COUNT} excluded_count=${COUNT_PREFIX_COUNT}
153 Check_For_Empty_Ipv4_Topology_After_Listening
154 [Documentation] Example-ipv4-topology should be empty now.
156 PrefixCounting.Check_Ipv4_Topology_Is_Empty
158 Delete_Bgp_Peer_Configuration
159 [Documentation] Revert the BGP configuration to the original state: without any configured peers.
160 [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
161 ${template_as_string} = BuiltIn.Set_Variable {'NAME': 'example-bgp-peer'}
162 ConfigViaRestconf.Delete_Xml_Template_Folder_Config_Via_Restconf ${BGP_VARIABLES_FOLDER}${/}bgp_peer ${template_as_string}
166 [Documentation] Setup imported resources, SSH-login to tools system,
167 ... create HTTP session, put Python tool to tools system.
168 SetupUtils.Setup_Utils_For_Setup_And_Teardown
169 ConfigViaRestconf.Setup_Config_Via_Restconf
170 PrefixCounting.PC_Setup
171 SSHLibrary.Set_Default_Configuration prompt=${TOOLS_SYSTEM_PROMPT}
172 SSHLibrary.Open_Connection ${TOOLS_SYSTEM_IP}
173 Utils.Flexible_Mininet_Login
174 RequestsLibrary.Create_Session operational http://${ODL_SYSTEM_IP}:${RESTCONFPORT}${OPERATIONAL_API} auth=${AUTH}
175 # TODO: Do not include slash in ${OPERATIONAL_TOPO_API}, having it typed here is more readable.
176 # TODO: Alternatively, create variable in Variables which starts with http.
177 # Both TODOs would probably need to update every suite relying on current Variables.
178 SSHLibrary.Put_File ${CURDIR}/../../../../tools/fastbgp/play.py
179 # Calculate the timeout value based on how many routes are going to be pushed
180 ${count} = Builtin.Convert_To_Integer ${COUNT_PREFIX_COUNT}
181 # TODO: Replace 20 with some formula from period and repetitions.
182 Builtin.Set_Suite_Variable ${bgp_filling_timeout} ${count*3/10000+20}
183 Builtin.Set_Suite_Variable ${bgp_emptying_timeout} ${bgp_filling_timeout*3/4}
184 # Timeout in case of doubled number of updates per iteration (per prefix count increase in the simplest mixed scenario)
185 Builtin.Run_Keyword_If '${UPDATE}' == 'mixed' Builtin.Set_Suite_Variable ${bgp_filling_timeout} ${count*6/10000+20}
186 KarafKeywords.Execute_Controller_Karaf_Command_On_Background log:set ${CONTROLLER_LOG_LEVEL}
187 KarafKeywords.Execute_Controller_Karaf_Command_On_Background log:set ${CONTROLLER_BGP_LOG_LEVEL} org.opendaylight.bgpcep
188 KarafKeywords.Execute_Controller_Karaf_Command_On_Background log:set ${CONTROLLER_BGP_LOG_LEVEL} org.opendaylight.protocol
191 [Documentation] Make sure Python tool was killed and tear down imported Resources.
192 KillPythonTool.Search_And_Kill_Remote_Python 'play\.py'
193 ConfigViaRestconf.Teardown_Config_Via_Restconf
194 RequestsLibrary.Delete_All_Sessions
195 SSHLibrary.Close_All_Connections
197 Store_File_To_Workspace
198 [Arguments] ${src_file_name} ${dst_file_name}
199 [Documentation] Store the provided file from the SSH client to workspace.
200 ${files}= SSHLibrary.List Files In Directory .
201 ${output_log}= SSHLibrary.Execute_Command cat ${src_file_name}
202 BuiltIn.Log ${output_log}
203 Create File ${dst_file_name} ${output_log}