*** Settings ***
Documentation General Utils library. This library has broad scope, it can be used by any robot system tests.
-Library SSHLibrary
-Library String
-Library DateTime
-Library Process
-Library Collections
Library RequestsLibrary
-Library ./UtilLibrary.py
-Resource KarafKeywords.robot
+Library SSHLibrary
Resource OpenStackOperations.robot
-Resource SSHKeywords.robot
-Variables ../variables/Variables.py
+Resource ../variables/Variables.robot
*** Variables ***
-${default_devstack_prompt_timeout} 10s
+${DEFAULT_DEVSTACK_PROMPT_TIMEOUT} 10s
${DEVSTACK_SYSTEM_PASSWORD} \ # set to empty, but provide for others to override if desired
-${blacklist_file} /tmp/blacklist.txt
-@{stable/newton_exclusion_regexes} ${EMPTY}
-@{stable/ocata_exclusion_regexes} ${EMPTY}
-@{stable/pike_exclusion_regexes} ${EMPTY}
-@{master_exclusion_regexes} ${EMPTY}
-${tempest_config_file} /opt/stack/tempest/etc/tempest.conf
-${external_physical_network} physnet1
-${external_net_name} external-net
-${external_subnet_name} external-subnet
-# Parameter values below are based on releng/builder - changing them requires updates in releng/builder as well
-${external_gateway} 10.10.10.250
-${external_subnet_allocation_pool} start=10.10.10.2,end=10.10.10.249
-${external_subnet} 10.10.10.0/24
+${OS_CNTL_CONN_ID} None
+${OS_CMP1_CONN_ID} None
+${OS_CMP2_CONN_ID} None
+${OS_CNTL_IP} ${EMPTY}
+${OS_CMP1_IP} ${EMPTY}
+${OS_CMP2_IP} ${EMPTY}
+@{OS_ALL_IPS} @{EMPTY}
+@{OS_CMP_IPS} @{EMPTY}
*** Keywords ***
-Run Tempest Tests
- [Arguments] ${tempest_regex} ${exclusion_file}=/dev/null ${tempest_conf}="" ${tempest_directory}=/opt/stack/tempest ${timeout}=420s
- [Documentation] Execute the tempest tests.
- Return From Keyword If "skip_if_${OPENSTACK_BRANCH}" in @{TEST_TAGS}
- Return From Keyword If "skip_if_${SECURITY_GROUP_MODE}" in @{TEST_TAGS}
- ${devstack_conn_id}= Get ControlNode Connection
- Switch Connection ${devstack_conn_id}
- # There seems to be a bug in the mitaka version of os-testr that does not allow --regex to work in conjunction
- # with a blacklist-file. Upgrading with pip should resolve this. This can probably go away once mitaka is no
- # longer tested in this environment. But, while it's being tested the mitaka devstack setup will be bringing
- # in this broken os-testr, so we manually upgrade here.
- Write Commands Until Prompt sudo pip install os-testr --upgrade timeout=120s
- Write Commands Until Prompt source ${DEVSTACK_DEPLOY_PATH}/openrc admin admin
- Write Commands Until Prompt cd ${tempest_directory}
- # From Ocata and moving forward, we can replace 'ostestr' with 'tempest run'
- ${results}= Write Commands Until Prompt ostestr --regex ${tempest_regex} -b ${exclusion_file} timeout=${timeout}
- Log ${results}
- # Save stdout to file
- Create File tempest_output_${tempest_regex}.log data=${results}
- # output tempest generated log file which may have different debug levels than what stdout would show
- # FIXME: having the INFO level tempest logs is helpful as it gives details like the UUIDs of nouns used in the
- # the tests which can sometimes be tracked in ODL and Openstack logs when debugging. However, this "cat" step
- # does not even complete for the tempest.api.network tests in under 2min. We need a faster way to get this
- # info. Probably pulling the log file and storing it on the log server is best. Hopefully someone can get
- # to this. For now, commenting out this next debug step.
- # ${output}= Write Commands Until Prompt cat ${tempest_directory}/tempest.log timeout=120s
- # Log ${output}
- Should Contain ${results} Failed: 0
- # TODO: also need to verify some non-zero pass count as well as other results are ok (e.g. skipped, etc)
-
-Log In To Tempest Executor And Setup Test Environment
- [Documentation] Initialize SetupUtils, open SSH connection to a devstack system and source the openstack
- ... credentials needed to run the tempest tests. The (sometimes empty) tempest blacklist file will be created
- ... and pushed to the tempest executor.
- Create Blacklist File
- SetupUtils.Setup_Utils_For_Setup_And_Teardown
- # source_pwd is expected to exist in the below Create Network, Create Subnet keywords. Might be a bug.
- ${source_pwd} Set Variable yes
- Set Suite Variable ${source_pwd}
- # Tempest tests need an existing external network in order to create routers.
- Create Network ${external_net_name} --external --default --provider-network-type flat --provider-physical-network ${PUBLIC_PHYSICAL_NETWORK}
- Create Subnet ${external_net_name} ${external_subnet_name} ${external_subnet} --gateway ${external_gateway} --allocation-pool ${external_subnet_allocation_pool}
- List Networks
- ${control_node_conn_id}= SSHLibrary.Open Connection ${OS_CONTROL_NODE_IP} prompt=${DEFAULT_LINUX_PROMPT_STRICT}
- SSHKeywords.Flexible SSH Login ${OS_USER}
- Write Commands Until Prompt source ${DEVSTACK_DEPLOY_PATH}/openrc admin admin
- Write Commands Until Prompt sudo rm -rf /opt/stack/tempest/.testrepository
- ${net_id}= Get Net Id ${external_net_name} ${control_node_conn_id}
- Tempest Conf Add External Network ${net_id}
-
-Tempest Conf Add External Network
- [Arguments] ${external_network_id}
- [Documentation] Tempest will be run with a config file - this function will add the
- ... given external network ID to the configuration file.
- Modify Config In File On Existing SSH Connection ${tempest_config_file} set network public_network_id ${external_network_id}
- Modify Config In File On Existing SSH Connection ${tempest_config_file} set DEFAULT debug False
- Modify Config In File On Existing SSH Connection ${tempest_config_file} set DEFAULT log_level INFO
- Write Commands Until Prompt sudo cat ${tempest_config_file}
- Write Commands Until Prompt sudo chmod 777 ${tempest_config_file}
-
-Modify Config In File On Existing SSH Connection
- [Arguments] ${config_file} ${modifier} ${config_section} ${config_key} ${config_value}=${EMPTY}
- [Documentation] uses crudini to populate oslo cofg file.
- # this keyword is only one line so seems like extra overhead, but this may be a good candidate to move
- # to a library at some point, when/if other suites need to use it, so wanted to make it generic.
- Write Commands Until Prompt sudo -E crudini --${modifier} ${config_file} ${config_section} ${config_key} ${config_value}
-
-Clean Up After Running Tempest
- [Documentation] Clean up any extra leftovers that were created to allow tempest tests to run.
- Delete Network ${external_net_name}
- List Networks
- Close All Connections
-
-Create Blacklist File
- [Documentation] For each exclusion regex in the required @{${OPENSTACK_BRANCH}_exclusion_regexes} list a new
- ... line will be created in the required ${blacklist_file} location. This file is pushed to the OS_CONTROL_NODE
- ... which is assumed to be the tempest executor.
- OperatingSystem.Create File ${blacklist_file}
- : FOR ${exclusion} IN @{${OPENSTACK_BRANCH}_exclusion_regexes}
- \ OperatingSystem.Append To File ${blacklist_file} ${exclusion}\n
- Log File ${blacklist_file}
- SSHKeywords.Copy File To Remote System ${OS_CONTROL_NODE_IP} ${blacklist_file} ${blacklist_file}
+Open Connection
+ [Arguments] ${name} ${ip}
+ ${conn_id} = SSHLibrary.Open Connection ${ip} prompt=${DEFAULT_LINUX_PROMPT}
+ SSHKeywords.Flexible SSH Login ${OS_USER} ${DEVSTACK_SYSTEM_PASSWORD}
+ BuiltIn.Set Suite Variable \${${name}} ${conn_id}
+ [Return] ${conn_id}
Devstack Suite Setup
- [Arguments] ${source_pwd}=no ${odl_ip}=${ODL_SYSTEM_IP}
- [Documentation] Login to the Openstack Control Node to run tempest suite
- Create Session session http://${odl_ip}:${RESTCONFPORT} auth=${AUTH} headers=${HEADERS}
- ${devstack_conn_id}= SSHLibrary.Open Connection ${OS_CONTROL_NODE_IP} prompt=${DEFAULT_LINUX_PROMPT}
- Set Suite Variable ${devstack_conn_id}
- Set Suite Variable ${source_pwd}
- Log ${devstack_conn_id}
- SSHKeywords.Flexible SSH Login ${OS_USER} ${DEVSTACK_SYSTEM_PASSWORD}
- SSHLibrary.Set Client Configuration timeout=${default_devstack_prompt_timeout}
+ [Arguments] ${odl_ip}=${ODL_SYSTEM_IP}
+ [Documentation] Open connections to the nodes
+ DevstackUtils.Get DevStack Nodes Data
+ RequestsLibrary.Create Session session http://${odl_ip}:${RESTCONFPORT} auth=${AUTH} headers=${HEADERS}
+ SSHLibrary.Set Default Configuration timeout=${DEFAULT_DEVSTACK_PROMPT_TIMEOUT}
+ BuiltIn.Run Keyword If 0 < ${NUM_OS_SYSTEM} DevstackUtils.Open Connection OS_CNTL_CONN_ID ${OS_CONTROL_NODE_IP}
+ BuiltIn.Run Keyword If 1 < ${NUM_OS_SYSTEM} DevstackUtils.Open Connection OS_CMP1_CONN_ID ${OS_COMPUTE_1_IP}
+ BuiltIn.Run Keyword If 2 < ${NUM_OS_SYSTEM} DevstackUtils.Open Connection OS_CMP2_CONN_ID ${OS_COMPUTE_2_IP}
Write Commands Until Prompt
- [Arguments] ${cmd} ${timeout}=${default_devstack_prompt_timeout}
+ [Arguments] ${cmd} ${timeout}=${DEFAULT_DEVSTACK_PROMPT_TIMEOUT}
[Documentation] quick wrapper for Write and Read Until Prompt Keywords to make test cases more readable
- Log ${cmd}
SSHLibrary.Set Client Configuration timeout=${timeout}
SSHLibrary.Read
SSHLibrary.Write ${cmd};echo Command Returns $?
- ${output}= SSHLibrary.Read Until Prompt
+ ${output} = SSHLibrary.Read Until Prompt
[Return] ${output}
+
+Write Commands Until Prompt And Log
+ [Arguments] ${cmd} ${timeout}=${DEFAULT_DEVSTACK_PROMPT_TIMEOUT}
+ [Documentation] quick wrapper for Write and Read Until Prompt Keywords to make test cases more readable
+ ${output} = DevstackUtils.Write Commands Until Prompt ${cmd} ${timeout}
+ BuiltIn.Log ${output}
+ [Return] ${output}
+
+Log Devstack Nodes Data
+ ${output} = BuiltIn.Catenate SEPARATOR=\n OS_CNTL_HOSTNAME: ${OS_CNTL_HOSTNAME} - OS_CNTL_IP: ${OS_CNTL_IP} - OS_CONTROL_NODE_IP: ${OS_CONTROL_NODE_IP} OS_CMP1_HOSTNAME: ${OS_CMP1_HOSTNAME} - OS_CMP1_IP: ${OS_CMP1_IP} - OS_COMPUTE_1_IP: ${OS_COMPUTE_1_IP} OS_CMP2_HOSTNAME: ${OS_CMP2_HOSTNAME} - OS_CMP2_IP: ${OS_CMP2_IP} - OS_COMPUTE_2_IP: ${OS_COMPUTE_2_IP} OS_ALL_IPS: @{OS_ALL_IPS}
+ ... OS_CMP_IPS: @{OS_CMP_IPS}
+ BuiltIn.Log DevStack Nodes Data:\n${output}
+
+Get DevStack Hostnames
+ [Documentation] Assign hostname global variables for DevStack nodes
+ ${OS_CNTL_HOSTNAME} = OpenStackOperations.Get Hypervisor Hostname From IP ${OS_CNTL_IP}
+ ${OS_CMP1_HOSTNAME} = OpenStackOperations.Get Hypervisor Hostname From IP ${OS_CMP1_IP}
+ ${OS_CMP2_HOSTNAME} = OpenStackOperations.Get Hypervisor Hostname From IP ${OS_CMP2_IP}
+ BuiltIn.Set Suite Variable ${OS_CNTL_HOSTNAME}
+ BuiltIn.Set Suite Variable ${OS_CMP1_HOSTNAME}
+ BuiltIn.Set Suite Variable ${OS_CMP2_HOSTNAME}
+
+Set Node Data For AllinOne Setup
+ [Documentation] Assign global variables for DevStack nodes where the Control Node enables Compute service also.
+ BuiltIn.Set Suite Variable @{OS_ALL_IPS} ${OS_CNTL_IP}
+
+Set Node Data For Control And Compute Node Setup
+ [Documentation] Assign global variables for DevStack nodes where the control node is also the compute
+ BuiltIn.Set Suite Variable ${OS_CMP1_IP} ${OS_CNTL_IP}
+ BuiltIn.Set Suite Variable ${OS_CMP2_IP} ${OS_COMPUTE_1_IP}
+ BuiltIn.Set Suite Variable @{OS_ALL_IPS} ${OS_CNTL_IP} ${OS_CMP2_IP}
+ BuiltIn.Set Suite Variable @{OS_CMP_IPS} ${OS_CMP1_IP} ${OS_CMP2_IP}
+
+Set Node Data For Control Only Node Setup
+ [Documentation] Assign global variables for DevStack nodes where the control node is different than the compute
+ BuiltIn.Set Suite Variable ${OS_CMP1_IP} ${OS_COMPUTE_1_IP}
+ BuiltIn.Set Suite Variable ${OS_CMP2_IP} ${OS_COMPUTE_2_IP}
+ BuiltIn.Set Suite Variable @{OS_ALL_IPS} ${OS_CNTL_IP} ${OS_CMP1_IP} ${OS_CMP2_IP}
+ BuiltIn.Set Suite Variable @{OS_CMP_IPS} ${OS_CMP1_IP} ${OS_CMP2_IP}
+
+Get DevStack Nodes Data
+ [Documentation] Assign global variables for DevStack nodes
+ BuiltIn.Set Suite Variable ${OS_CNTL_IP} ${OS_CONTROL_NODE_IP}
+ BuiltIn.Run Keyword If ${NUM_OS_SYSTEM} == 1 DevstackUtils.Set Node Data For AllinOne Setup
+ ... ELSE IF ${NUM_OS_SYSTEM} == 2 DevstackUtils.Set Node Data For Control And Compute Node Setup
+ ... ELSE IF ${NUM_OS_SYSTEM} == 3 DevstackUtils.Set Node Data For Control Only Node Setup
+ DevstackUtils.Get DevStack Hostnames
+ DevstackUtils.Log Devstack Nodes Data
Code Review / integration / test.git / blobdiff