Resource Utils.robot
Resource ../variables/Variables.robot
Resource OVSDB.robot
+Resource ../variables/netvirt/Variables.robot
+Resource VpnOperations.robot
*** Variables ***
+@{itm_created} TZA
+${genius_config_dir} ${CURDIR}/../variables/genius
+${Bridge-1} BR1
+${Bridge-2} BR2
+${DEFAULT_MONITORING_INTERVAL} Tunnel Monitoring Interval (for VXLAN tunnels): 1000
+@{DIAG_SERVICES} OPENFLOW IFM ITM DATASTORE
*** Keywords ***
Genius Suite Setup
Start Suite
[Documentation] Initial setup for Genius test suites
- Run_Keyword_If_At_Least_Oxygen Check Service Status ACTIVE OPERATIONAL
+ Run_Keyword_If_At_Least_Oxygen Wait Until Keyword Succeeds 10 1 Check Service Status ACTIVE OPERATIONAL
Log Start the tests
${conn_id_1}= Open Connection ${TOOLS_SYSTEM_IP} prompt=${DEFAULT_LINUX_PROMPT} timeout=30s
Set Global Variable ${conn_id_1}
[Documentation] Issues the karaf shell command showSvcStatus to verify the ready and service states are the same as the arguments passed
${service_status_output} Issue_Command_On_Karaf_Console showSvcStatus ${ODL_SYSTEM_IP} 8101
Should Contain ${service_status_output} ${system_ready_state}
- @{split} Split To Lines ${service_status_output} 3 7
- : FOR ${var} IN @{split}
- \ Should Contain ${var} ${service_state}
+ : FOR ${service} IN @{DIAG_SERVICES}
+ \ Should Match Regexp ${service_status_output} ${service} +: ${service_state}
Create Vteps
- [Arguments] ${TOOLS_SYSTEM_IP} ${TOOLS_SYSTEM_2_IP} ${vlan} ${gateway-ip}
+ [Arguments] ${Dpn_id_1} ${Dpn_id_2} ${TOOLS_SYSTEM_IP} ${TOOLS_SYSTEM_2_IP} ${vlan} ${gateway-ip}
[Documentation] This keyword creates VTEPs between ${TOOLS_SYSTEM_IP} and ${TOOLS_SYSTEM_2_IP}
${body} OperatingSystem.Get File ${genius_config_dir}/Itm_creation_no_vlan.json
${substr} Should Match Regexp ${TOOLS_SYSTEM_IP} [0-9]\{1,3}\.[0-9]\{1,3}\.[0-9]\{1,3}\.
Set Global Variable ${subnet}
${vlan}= Set Variable ${vlan}
${gateway-ip}= Set Variable ${gateway-ip}
- ${body} Set Json ${TOOLS_SYSTEM_IP} ${TOOLS_SYSTEM_2_IP} ${vlan} ${gateway-ip} ${subnet}
+ ${body} Genius.Set Json ${Dpn_id_1} ${Dpn_id_2} ${TOOLS_SYSTEM_IP} ${TOOLS_SYSTEM_2_IP} ${vlan}
+ ... ${gateway-ip} ${subnet}
${vtep_body} Set Variable ${body}
Set Global Variable ${vtep_body}
${resp} RequestsLibrary.Post Request session ${CONFIG_API}/itm:transport-zones/ data=${body}
should be equal as strings ${resp.status_code} 204
Set Json
- [Arguments] ${TOOLS_SYSTEM_IP} ${TOOLS_SYSTEM_2_IP} ${vlan} ${gateway-ip} ${subnet}
+ [Arguments] ${Dpn_id_1} ${Dpn_id_2} ${TOOLS_SYSTEM_IP} ${TOOLS_SYSTEM_2_IP} ${vlan} ${gateway-ip}
+ ... ${subnet}
[Documentation] Sets Json with the values passed for it.
${body} OperatingSystem.Get File ${genius_config_dir}/Itm_creation_no_vlan.json
${body} replace string ${body} 1.1.1.1 ${subnet}
OVSDB.Get DumpFlows And Ovsconfig ${conn_id_1} BR1
OVSDB.Get DumpFlows And Ovsconfig ${conn_id_2} BR2
BuiltIn.Run Keyword And Ignore Error DataModels.Get Model Dump ${ODL_SYSTEM_IP} ${data_models}
+
+ITM Direct Tunnels Start Suite
+ [Documentation] start suite for itm scalability
+ ClusterManagement.ClusterManagement_Setup
+ ClusterManagement.Stop_Members_From_List_Or_All
+ ClusterManagement.Clean_Journals_Data_And_Snapshots_On_List_Or_All
+ Run Command On Remote System And Log ${ODL_SYSTEM_IP} sed -i -- 's/<itm-direct-tunnels>false/<itm-direct-tunnels>true/g' ${GENIUS_IFM_CONFIG_FLAG}
+ ClusterManagement.Start_Members_From_List_Or_All
+ Genius Suite Setup
+
+ITM Direct Tunnels Stop Suite
+ Run Command On Remote System And Log ${ODL_SYSTEM_IP} sed -i -- 's/<itm-direct-tunnels>true/<itm-direct-tunnels>false/g' ${GENIUS_IFM_CONFIG_FLAG}
+ Genius Suite Teardown
+
+Verify Tunnel Monitoring is on
+ [Documentation] This keyword will get tep:show output and verify tunnel monitoring status
+ ${output}= Issue Command On Karaf Console ${TEP_SHOW}
+ Should Contain ${output} ${TUNNEL_MONITOR_ON}
+
+Ovs Verification For 2 Dpn
+ [Arguments] ${connection_id} ${local} ${remote-1} ${tunnel} ${tunnel-type}
+ [Documentation] Checks whether the created Interface is seen on OVS or not.
+ Switch Connection ${connection_id}
+ ${check} Execute Command sudo ovs-vsctl show
+ Log ${check}
+ Should Contain ${check} local_ip="${local}" remote_ip="${remote-1}" ${tunnel} ${tunnel-type}
+ [Return] ${check}
+
+Get ITM
+ [Arguments] ${itm_created[0]} ${subnet} ${vlan} ${Dpn_id_1} ${TOOLS_SYSTEM_IP} ${Dpn_id_2}
+ ... ${TOOLS_SYSTEM_2_IP}
+ [Documentation] It returns the created ITM Transport zone with the passed values during the creation is done.
+ Log ${itm_created[0]},${subnet}, ${vlan}, ${Dpn_id_1},${TOOLS_SYSTEM_IP}, ${Dpn_id_2}, ${TOOLS_SYSTEM_2_IP}
+ @{Itm-no-vlan} Create List ${itm_created[0]} ${subnet} ${vlan} ${Dpn_id_1} ${Bridge-1}-eth1
+ ... ${TOOLS_SYSTEM_IP} ${Dpn_id_2} ${Bridge-2}-eth1 ${TOOLS_SYSTEM_2_IP}
+ Check For Elements At URI ${TUNNEL_TRANSPORTZONE}/transport-zone/${itm_created[0]} ${Itm-no-vlan}
+
+Check Tunnel Delete On OVS
+ [Arguments] ${connection-id} ${tunnel}
+ [Documentation] Verifies the Tunnel is deleted from OVS
+ Switch Connection ${connection-id}
+ ${return} Execute Command sudo ovs-vsctl show
+ Log ${return}
+ Should Not Contain ${return} ${tunnel}
+ [Return] ${return}
+
+Check Table0 Entry For 2 Dpn
+ [Arguments] ${connection_id} ${Bridgename} ${port-num1}
+ [Documentation] Checks the Table 0 entry in the OVS when flows are dumped.
+ Switch Connection ${connection_id}
+ Log ${connection_id}
+ ${check} Execute Command sudo ovs-ofctl -O OpenFlow13 dump-flows ${Bridgename}
+ Log ${check}
+ Should Contain ${check} in_port=${port-num1}
+ [Return] ${check}
+
+Check ITM Tunnel State
+ [Arguments] ${tunnel1} ${tunnel2}
+ [Documentation] Verifies the Tunnel is deleted from datastore
+ ${resp} RequestsLibrary.Get Request session ${OPERATIONAL_API}/itm-state:tunnels_state/
+ Should Not Contain ${resp.content} ${tunnel1} ${tunnel2}
+
+Verify Tunnel Status as UP
+ [Documentation] Verify that the number of tunnels are UP
+ ${No_of_Teps} Issue_Command_On_Karaf_Console ${TEP_SHOW}
+ ${Lines_of_TZA} Get Lines Containing String ${No_of_Teps} TZA
+ ${Expected_Node_Count} Get Line Count ${Lines_of_TZA}
+ ${no_of_tunnels} Issue_Command_On_Karaf_Console ${TEP_SHOW_STATE}
+ ${lines_of_VXLAN} Get Lines Containing String ${no_of_tunnels} VXLAN
+ Should Contain ${no_of_tunnels} ${STATE_UP}
+ Should Not Contain ${no_of_tunnels} ${STATE_DOWN}
+ Should Not Contain ${no_of_tunnels} ${STATE_UNKNOWN}
+ ${Actual_Tunnel_Count} Get Line Count ${lines_of_VXLAN}
+ ${Expected_Tunnel_Count} Set Variable ${Expected_Node_Count*${Expected_Node_Count - 1}}
+ Should Be Equal As Strings ${Actual_Tunnel_Count} ${Expected_Tunnel_Count}
Code Review / integration / test.git / blobdiff