*** Settings ***
-Documentation This suite is a common keywords file for genius project.
-Library Collections
-Library OperatingSystem
-Library RequestsLibrary
-Library SSHLibrary
-Library string
-Resource ClusterManagement.robot
-Resource CompareStream.robot
-Resource DataModels.robot
-Resource KarafKeywords.robot
-Resource ODLTools.robot
-Resource OVSDB.robot
-Resource ToolsSystem.robot
-Resource Utils.robot
-Resource VpnOperations.robot
-Resource ../variables/Variables.robot
-Resource ../variables/netvirt/Variables.robot
+Documentation This suite is a common keywords file for genius project.
+
+Library Collections
+Library OperatingSystem
+Library RequestsLibrary
+Library SSHLibrary
+Library string
+Resource ClusterManagement.robot
+Resource CompareStream.robot
+Resource DataModels.robot
+Resource KarafKeywords.robot
+Resource ODLTools.robot
+Resource OVSDB.robot
+Resource ToolsSystem.robot
+Resource Utils.robot
+Resource VpnOperations.robot
+Resource ../variables/Variables.robot
+Resource ../variables/netvirt/Variables.robot
+
*** Variables ***
-@{itm_created} TZA
-${genius_config_dir} ${CURDIR}/../variables/genius
-${Bridge} ${INTEGRATION_BRIDGE}
-${DEFAULT_MONITORING_INTERVAL} Tunnel Monitoring Interval (for VXLAN tunnels): 1000
-@{GENIUS_DIAG_SERVICES} OPENFLOW IFM ITM DATASTORE OVSDB
-${gateway_ip} 0.0.0.0
-${port_name} br-int-eth1
-${VLAN} 100
-${NO_VLAN} 0
-${DEFAULT_TRANSPORT_ZONE} default-transport-zone
-${SET_LOCAL_IP} sudo ovs-vsctl set O . other_config:local_ip=
-${REMOVE_LOCAL_IP} sudo ovs-vsctl remove O . other_config local_ip
-${odl_stream_check } ${Stream_dict}[${ODL_STREAM}] <= ${Stream_dict}[neon]
+@{itm_created} TZA
+${genius_config_dir} ${CURDIR}/../variables/genius
+${Bridge} ${INTEGRATION_BRIDGE}
+${DEFAULT_MONITORING_INTERVAL} Tunnel Monitoring Interval (for VXLAN tunnels): 1000
+@{GENIUS_DIAG_SERVICES} OPENFLOW IFM ITM DATASTORE OVSDB
+${gateway_ip} 0.0.0.0
+${port_name} br-int-eth1
+${VLAN} 100
+${NO_VLAN} 0
+${DEFAULT_TRANSPORT_ZONE} default-transport-zone
+${SET_LOCAL_IP} sudo ovs-vsctl set O . other_config:local_ip=
+${REMOVE_LOCAL_IP} sudo ovs-vsctl remove O . other_config local_ip
+${odl_stream_check } ${Stream_dict}[${ODL_STREAM}] <= ${Stream_dict}[neon]
+
*** Keywords ***
Genius Suite Setup
[Documentation] Create Rest Session to http://${ODL_SYSTEM_IP}:${RESTCONFPORT}
Genius.Start Suite
- RequestsLibrary.Create Session session http://${ODL_SYSTEM_IP}:${RESTCONFPORT} auth=${AUTH} headers=${HEADERS} timeout=5
+ RequestsLibrary.Create Session
+ ... session
+ ... http://${ODL_SYSTEM_IP}:${RESTCONFPORT}
+ ... auth=${AUTH}
+ ... headers=${HEADERS}
+ ... timeout=5
Genius Suite Teardown
[Documentation] Delete all sessions
Start Suite
[Documentation] Initial setup for Genius test suites
- Run_Keyword_If_At_Least_Oxygen Wait Until Keyword Succeeds 60 2 ClusterManagement.Check Status Of Services Is OPERATIONAL @{GENIUS_DIAG_SERVICES}
+ Run_Keyword_If_At_Least_Oxygen
+ ... Wait Until Keyword Succeeds
+ ... 60
+ ... 2
+ ... ClusterManagement.Check Status Of Services Is OPERATIONAL
+ ... @{GENIUS_DIAG_SERVICES}
KarafKeywords.Setup_Karaf_Keywords
ToolsSystem.Get Tools System Nodes Data
${karaf_debug_enabled} = BuiltIn.Get_Variable_Value ${KARAF_DEBUG} ${False}
- BuiltIn.run_keyword_if ${karaf_debug_enabled} KarafKeywords.Execute_Controller_Karaf_Command_On_Background log:set DEBUG org.opendaylight.genius
+ IF ${karaf_debug_enabled}
+ KarafKeywords.Execute_Controller_Karaf_Command_On_Background log:set DEBUG org.opendaylight.genius
+ END
Genius.Set Switch Configuration
- ${check} = BuiltIn.Wait Until Keyword Succeeds 30 10 Check Port Status Is ESTABLISHED ${ODL_OF_PORT_6653} @{TOOLS_SYSTEM_ALL_IPS}
- ${check} = BuiltIn.Wait Until Keyword Succeeds 30 10 Check Port Status Is ESTABLISHED ${OVSDBPORT} @{TOOLS_SYSTEM_ALL_IPS}
+ ${check} = BuiltIn.Wait Until Keyword Succeeds
+ ... 30
+ ... 10
+ ... Check Port Status Is ESTABLISHED
+ ... ${ODL_OF_PORT_6653}
+ ... @{TOOLS_SYSTEM_ALL_IPS}
+ ${check} = BuiltIn.Wait Until Keyword Succeeds
+ ... 30
+ ... 10
+ ... Check Port Status Is ESTABLISHED
+ ... ${OVSDBPORT}
+ ... @{TOOLS_SYSTEM_ALL_IPS}
Genius.Build Dpn List
@{SWITCH_DATA} = Collections.Combine Lists ${DPN_ID_LIST} ${TOOLS_SYSTEM_ALL_IPS}
BuiltIn.Set Suite Variable @{SWITCH_DATA}
- ${substr} Should Match Regexp ${TOOLS_SYSTEM_1_IP} [0-9]\{1,3}\.[0-9]\{1,3}\.[0-9]\{1,3}\.
+ ${substr} = Should Match Regexp ${TOOLS_SYSTEM_1_IP} [0-9]\{1,3}\.[0-9]\{1,3}\.[0-9]\{1,3}\.
${SUBNET} = Catenate ${substr}0
BuiltIn.Set Suite Variable ${SUBNET}
END
Check Port Status Is ESTABLISHED
- [Arguments] ${port} @{tools_ips}
[Documentation] This keyword will check whether ports are established or not on OVS
+ [Arguments] ${port} @{tools_ips}
FOR ${tools_ip} IN @{tools_ips}
- ${check_establishment} = Utils.Run Command On Remote System And Log ${tools_ip} netstat -anp | grep ${port}
+ ${check_establishment} = Utils.Run Command On Remote System And Log
+ ... ${tools_ip}
+ ... netstat -anp | grep ${port}
BuiltIn.Should Contain ${check_establishment} ESTABLISHED
END
- [Return] ${check_establishment}
+ RETURN ${check_establishment}
Create Vteps
- [Arguments] ${vlan_id} ${gateway_ip}
[Documentation] This keyword creates VTEPs between OVS
+ [Arguments] ${vlan_id} ${gateway_ip}
${body} = Genius.Set Json ${vlan_id} ${gateway_ip} ${SUBNET} @{TOOLS_SYSTEM_ALL_IPS}
- ${resp} = RequestsLibrary.Put Request session ${CONFIG_API}/itm:transport-zones/transport-zone/TZA data=${body}
+ ${resp} = RequestsLibrary.Put Request
+ ... session
+ ... ${CONFIG_API}/itm:transport-zones/transport-zone/TZA
+ ... data=${body}
BuiltIn.Should Contain ${ALLOWED_STATUS_CODES} ${resp.status_code}
Set Json
- [Arguments] ${vlan} ${gateway_ip} ${subnet} @{tools_ips}
[Documentation] Sets Json with the values passed for it.
- ${body} = BuiltIn.Run Keyword If ${odl_stream_check } OperatingSystem.Get File ${genius_config_dir}/Itm_creation_no_vlan_below_sodium.json
- ... ELSE OperatingSystem.Get File ${genius_config_dir}/Itm_creation_no_vlan_sodium_and_above.json
- ${body} = BuiltIn.Run Keyword If ${odl_stream_check } String.Replace String ${body} 1.1.1.1 ${subnet}
- ... ELSE BuiltIn.Set Variable ${body}
- ${body} = BuiltIn.Run Keyword If ${odl_stream_check } String.Replace String ${body} "vlan-id": 0 "vlan-id": ${vlan}
- ... ELSE BuiltIn.Set Variable ${body}
- ${body} = BuiltIn.Run Keyword If ${odl_stream_check } String.Replace String ${body} "gateway-ip": "0.0.0.0" "gateway-ip": "${gateway_ip}"
- ... ELSE BuiltIn.Set Variable ${body}
+ [Arguments] ${vlan} ${gateway_ip} ${subnet} @{tools_ips}
+ IF ${odl_stream_check }
+ ${body} = OperatingSystem.Get File ${genius_config_dir}/Itm_creation_no_vlan_below_sodium.json
+ ELSE
+ ${body} = OperatingSystem.Get File ${genius_config_dir}/Itm_creation_no_vlan_sodium_and_above.json
+ END
+ IF ${odl_stream_check }
+ ${body} = String.Replace String ${body} 1.1.1.1 ${subnet}
+ ELSE
+ ${body} = BuiltIn.Set Variable ${body}
+ END
+ IF ${odl_stream_check }
+ ${body} = String.Replace String ${body} "vlan-id": 0 "vlan-id": ${vlan}
+ ELSE
+ ${body} = BuiltIn.Set Variable ${body}
+ END
+ IF ${odl_stream_check }
+ ${body} = String.Replace String ${body} "gateway-ip": "0.0.0.0" "gateway-ip": "${gateway_ip}"
+ ELSE
+ ${body} = BuiltIn.Set Variable ${body}
+ END
FOR ${tool_system_index} IN RANGE ${NUM_TOOLS_SYSTEM}
- ${body} String.Replace String ${body} "dpn-id": 10${tool_system_index} "dpn-id": ${DPN_ID_LIST[${tool_system_index}]}
- ${body} String.Replace String ${body} "ip-address": "${tool_system_index+2}.${tool_system_index+2}.${tool_system_index+2}.${tool_system_index+2}" "ip-address": "${tools_ips}[${tool_system_index}]"
+ ${body} = String.Replace String
+ ... ${body}
+ ... "dpn-id": 10${tool_system_index}
+ ... "dpn-id": ${DPN_ID_LIST[${tool_system_index}]}
+ ${body} = String.Replace String
+ ... ${body}
+ ... "ip-address": "${tool_system_index+2}.${tool_system_index+2}.${tool_system_index+2}.${tool_system_index+2}"
+ ... "ip-address": "${tools_ips}[${tool_system_index}]"
END
BuiltIn.Log ${body}
- [Return] ${body} # returns complete json that has been updated
+ RETURN ${body} # returns complete json that has been updated
Build Dpn List
[Documentation] This keyword builds the list of DPN ids after configuring OVS bridges on each of the TOOLS_SYSTEM_IPs.
@{DPN_ID_LIST} = BuiltIn.Create List
FOR ${tools_ip} IN @{TOOLS_SYSTEM_ALL_IPS}
- ${output} Utils.Run Command On Remote System And Log ${tools_ip} sudo ovs-ofctl show -O Openflow13 ${Bridge} | head -1 | awk -F "dpid:" '{ print $2 }'
- ${dpn_id} Utils.Run Command On Remote System And Log ${tools_ip} echo \$\(\(16\#${output}\)\)
+ ${output} = Utils.Run Command On Remote System And Log
+ ... ${tools_ip}
+ ... sudo ovs-ofctl show -O Openflow13 ${Bridge} | head -1 | awk -F "dpid:" '{ print $2 }'
+ ${dpn_id} = Utils.Run Command On Remote System And Log ${tools_ip} echo \$\(\(16\#${output}\)\)
Collections.Append To List ${DPN_ID_LIST} ${dpn_id}
END
BuiltIn.Set Suite Variable @{DPN_ID_LIST}
ClusterManagement.ClusterManagement_Setup
ClusterManagement.Stop_Members_From_List_Or_All
FOR ${controller_index} IN RANGE ${NUM_ODL_SYSTEM}
- Utils.Run Command On Remote System And Log ${ODL_SYSTEM_${controller_index+1}_IP} sed -i -- 's/<itm-direct-tunnels>false/<itm-direct-tunnels>true/g' ${GENIUS_IFM_CONFIG_FLAG}
+ Utils.Run Command On Remote System And Log
+ ... ${ODL_SYSTEM_${controller_index+1}_IP}
+ ... sed -i -- 's/<itm-direct-tunnels>false/<itm-direct-tunnels>true/g' ${GENIUS_IFM_CONFIG_FLAG}
END
ClusterManagement.Start_Members_From_List_Or_All
Genius.Genius Suite Setup
ITM Direct Tunnels Stop Suite
[Documentation] Stop suite for ITM Direct Tunnels.
FOR ${controller_index} IN RANGE ${NUM_ODL_SYSTEM}
- Utils.Run Command On Remote System And Log ${ODL_SYSTEM_${controller_index+1}_IP} sed -i -- 's/<itm-direct-tunnels>true/<itm-direct-tunnels>false/g' ${GENIUS_IFM_CONFIG_FLAG}
+ Utils.Run Command On Remote System And Log
+ ... ${ODL_SYSTEM_${controller_index+1}_IP}
+ ... sed -i -- 's/<itm-direct-tunnels>true/<itm-direct-tunnels>false/g' ${GENIUS_IFM_CONFIG_FLAG}
END
Genius.Genius Suite Teardown
END
Get ITM
- [Arguments] ${itm_created[0]} ${switch_data}=${SWITCH_DATA}
[Documentation] It returns the created ITM Transport zone with the passed values during the creation is done.
+ [Arguments] ${itm_created[0]} ${switch_data}=${SWITCH_DATA}
Collections.Append To List ${switch_data} ${itm_created[0]}
Utils.Check For Elements At URI ${TUNNEL_TRANSPORTZONE}/transport-zone/${itm_created[0]} ${switch_data}
Check Tunnel Delete On OVS
- [Arguments] ${tunnel_list}
[Documentation] Verifies the Tunnel is deleted from OVS.
+ [Arguments] ${tunnel_list}
FOR ${tools_ip} IN @{TOOLS_SYSTEM_ALL_IPS}
${output} = Utils.Run Command On Remote System ${tools_ip} sudo ovs-vsctl show
Genius.Verify Deleted Tunnels on OVS ${tunnel_list} ${output}
END
Check Table0 Entry In a Dpn
- [Arguments] ${tools_ip} ${bridgename} ${port_numbers}
[Documentation] Checks the Table 0 entry in the OVS when flows are dumped.
- ${check} = Utils.Run Command On Remote System And Log ${tools_ip} sudo ovs-ofctl -OOpenFlow13 dump-flows ${bridgename}
+ [Arguments] ${tools_ip} ${bridgename} ${port_numbers}
+ ${check} = Utils.Run Command On Remote System And Log
+ ... ${tools_ip}
+ ... sudo ovs-ofctl -OOpenFlow13 dump-flows ${bridgename}
${num_ports} = BuiltIn.Get Length ${port_numbers}
FOR ${port_index} IN RANGE ${num_ports}
BuiltIn.Should Contain ${check} in_port=${port_numbers}[${port_index}]
END
Verify Tunnel Status As Up
- [Arguments] ${no_of_switches}=${NUM_TOOLS_SYSTEM}
[Documentation] Verify that the number of tunnels are UP
+ [Arguments] ${no_of_switches}=${NUM_TOOLS_SYSTEM}
${no_of_tunnels} = KarafKeywords.Issue Command On Karaf Console ${TEP_SHOW_STATE}
${lines_of_state_up} = String.Get Lines Containing String ${no_of_tunnels} ${STATE_UP}
${actual_tunnel_count} = String.Get Line Count ${lines_of_state_up}
BuiltIn.Should Be Equal As Strings ${actual_tunnel_count} ${expected_tunnel_count}
Verify Tunnel Status
- [Arguments] ${tunnel_status} ${tunnel_names}
[Documentation] Verifies if all tunnels in the input, has the expected status(UP/DOWN/UNKNOWN)
+ [Arguments] ${tunnel_status} ${tunnel_names}
${tep_result} = KarafKeywords.Issue Command On Karaf Console ${TEP_SHOW_STATE}
${number_of_tunnels} = BuiltIn.Get Length ${tunnel_names}
FOR ${each_tunnel} IN RANGE ${number_of_tunnels}
END
Get Tunnels On OVS
- [Arguments] ${connection_id}
[Documentation] Retrieves the list of tunnel ports present on OVS
+ [Arguments] ${connection_id}
SSHLibrary.Switch Connection ${connection_id}
- ${ovs_result} = Utils.Write Commands Until Expected Prompt sudo ovs-vsctl show ${DEFAULT_LINUX_PROMPT_STRICT}
+ ${ovs_result} = Utils.Write Commands Until Expected Prompt
+ ... sudo ovs-vsctl show
+ ... ${DEFAULT_LINUX_PROMPT_STRICT}
@{tunnel_names} = BuiltIn.Create List
${tunnels} = String.Get Lines Matching Regexp ${ovs_result} Interface "tun.*" True
@{tunnels_list} = String.Split To Lines ${tunnels}
FOR ${tun} IN @{tunnels_list}
- ${tun_list} Get Regexp Matches ${tun} tun.*\\w
+ ${tun_list} = Get Regexp Matches ${tun} tun.*\\w
Collections.Append To List ${tunnel_names} @{tun_list}
END
${items_in_list} = BuiltIn.Get Length ${tunnel_names}
- [Return] @{tunnel_names}
+ RETURN @{tunnel_names}
Get Tunnel
- [Arguments] ${src} ${dst} ${type} ${config_api_type}=${EMPTY}
[Documentation] This keyword returns tunnel interface name between source DPN and destination DPN.
... Statements are executed depending on whether it is itm tunnel state(default) or dpn tep state.
- ${resp} = BuiltIn.Run Keyword If '${config_api_type}' == '${EMPTY}' RequestsLibrary.Get Request session ${CONFIG_API}/itm-state:tunnel-list/internal-tunnel/${src}/${dst}/${type}/
- ... ELSE RequestsLibrary.Get Request session ${CONFIG_API}/itm-state:dpn-teps-state/dpns-teps/${src}/remote-dpns/${dst}/
+ [Arguments] ${src} ${dst} ${type} ${config_api_type}=${EMPTY}
+ IF '${config_api_type}' == '${EMPTY}'
+ ${resp} = RequestsLibrary.Get Request
+ ... session
+ ... ${CONFIG_API}/itm-state:tunnel-list/internal-tunnel/${src}/${dst}/${type}/
+ ELSE
+ ${resp} = RequestsLibrary.Get Request
+ ... session
+ ... ${CONFIG_API}/itm-state:dpn-teps-state/dpns-teps/${src}/remote-dpns/${dst}/
+ END
BuiltIn.Should Be Equal As Strings ${resp.status_code} ${RESP_CODE}
BuiltIn.Log ${resp.text}
${respjson} = RequestsLibrary.To Json ${resp.text} pretty_print=True
${json} = Utils.Json Parse From String ${resp.text}
BuiltIn.Should Contain ${resp.text} ${dst}
- BuiltIn.Run Keyword If '${config_api_type}' == '${EMPTY}' BuiltIn.Should Contain ${resp.text} ${src}
- ${tunnel_interface_name} = BuiltIn.Run Keyword If "tunnel-interface-names" in "${json}" Genius.Get Tunnel Interface Name ${json["internal-tunnel"][0]} tunnel-interface-names
- ${tunnel_name_output} ${tunnel_name} = BuiltIn.Run Keyword Unless '${config_api_type}' == '${EMPTY}' BuiltIn.Should Match Regexp ${resp.text} "tunnel-name":"(tun[\\w\\d]+)"
- ${tunnel} = BuiltIn.Set Variable If '${config_api_type}' == '${EMPTY}' ${tunnel_interface_name} ${tunnel_name}
- [Return] ${tunnel}
+ IF '${config_api_type}' == '${EMPTY}'
+ BuiltIn.Should Contain ${resp.text} ${src}
+ END
+ IF "tunnel-interface-names" in "${json}"
+ ${tunnel_interface_name} = Genius.Get Tunnel Interface Name
+ ... ${json["internal-tunnel"][0]}
+ ... tunnel-interface-names
+ ELSE
+ ${tunnel_interface_name} = Set Variable ${None}
+ END
+ IF '${config_api_type}' != '${EMPTY}'
+ ${tunnel_name_output} ${tunnel_name} = BuiltIn.Should Match Regexp
+ ... ${resp.text}
+ ... "tunnel-name":"(tun[\\w\\d]+)"
+ ELSE
+ ${tunnel_name_output} ${tunnel_name} = Set Variable ${None} ${None}
+ END
+ ${tunnel} = BuiltIn.Set Variable If
+ ... '${config_api_type}' == '${EMPTY}'
+ ... ${tunnel_interface_name}
+ ... ${tunnel_name}
+ RETURN ${tunnel}
Get Tunnel Interface Name
- [Arguments] ${json} ${expected_tunnel_interface_name}
[Documentation] This keyword extracts tunnel interface name from json given as input.
+ [Arguments] ${json} ${expected_tunnel_interface_name}
${tunnels} = Collections.Get From Dictionary ${json} ${expected_tunnel_interface_name}
- [Return] ${tunnels[0]}
+ RETURN ${tunnels[0]}
Verify Tunnel Delete on DS
- [Arguments] ${tunnel}
[Documentation] This keyword confirms that specified tunnel is not present by giving command from karaf console.
+ [Arguments] ${tunnel}
${output} = KarafKeywords.Issue Command On Karaf Console ${TEP_SHOW_STATE}
BuiltIn.Should Not Contain ${output} ${tunnel}
Verify Tunnel Monitoring Status
[Arguments] ${tunnel_monitor_status}
- ${output}= KarafKeywords.Issue Command On Karaf Console ${TEP_SHOW}
+ ${output} = KarafKeywords.Issue Command On Karaf Console ${TEP_SHOW}
BuiltIn.Should Contain ${output} ${tunnel_monitor_status}
Set Switch Configuration
SSHLibrary.Execute Command sudo ovs-vsctl set bridge ${Bridge} protocols=OpenFlow13
SSHLibrary.Execute Command sudo ovs-vsctl set-controller ${Bridge} tcp:${ODL_SYSTEM_IP}:${ODL_OF_PORT_6653}
SSHLibrary.Execute Command sudo ifconfig ${Bridge} up
- SSHLibrary.Execute Command sudo ovs-vsctl add-port ${Bridge} tap${tool_system_index}ed70586-6c -- set Interface tap${tool_system_index}ed70586-6c type=tap
+ SSHLibrary.Execute Command
+ ... sudo ovs-vsctl add-port ${Bridge} tap${tool_system_index}ed70586-6c -- set Interface tap${tool_system_index}ed70586-6c type=tap
SSHLibrary.Execute Command sudo ovs-vsctl set-manager tcp:${ODL_SYSTEM_IP}:${OVSDBPORT}
SSHLibrary.Execute Command sudo ovs-vsctl show
END
Ovs Verification For Each Dpn
- [Arguments] ${tools_system_ip} ${tools_ips}
[Documentation] This keyword will verify whether local and remote ip are present on the tunnels available on OVS
+ [Arguments] ${tools_system_ip} ${tools_ips}
${ovs_output} = Utils.Run Command On Remote System And Log ${tools_system_ip} sudo ovs-vsctl show
@{updated_tools_ip_list} = BuiltIn.Create List @{tools_ips}
Collections.Remove Values From List ${updated_tools_ip_list} ${tools_system_ip}
BuiltIn.Log Many @{updated_tools_ip_list}
- ${num_tool_ips} BuiltIn.Get Length ${updated_tools_ip_list}
+ ${num_tool_ips} = BuiltIn.Get Length ${updated_tools_ip_list}
FOR ${num} IN RANGE ${num_tool_ips}
${tools_ip} = Collections.Get From List ${updated_tools_ip_list} ${num}
BuiltIn.Should Contain ${ovs_output} ${tools_ip}
Get Tunnels List
[Documentation] The keyword fetches the list of operational tunnels from ODL
- ${no_of_tunnels} KarafKeywords.Issue Command On Karaf Console ${TEP_SHOW_STATE}
+ ${no_of_tunnels} = KarafKeywords.Issue Command On Karaf Console ${TEP_SHOW_STATE}
${tunnels} = String.Get Regexp Matches ${no_of_tunnels} tun[\\w\\d]+
BuiltIn.Log ${tunnels}
- [Return] ${tunnels}
+ RETURN ${tunnels}
Verify Table0 Entry After fetching Port Number
[Documentation] This keyword will get the port number and checks the table0 entry for each dpn
FOR ${tools_ip} IN @{TOOLS_SYSTEM_ALL_IPS}
- ${check} = Utils.Run Command On Remote System And Log ${tools_ip} sudo ovs-ofctl -O OpenFlow13 show ${Bridge}
+ ${check} = Utils.Run Command On Remote System And Log
+ ... ${tools_ip}
+ ... sudo ovs-ofctl -O OpenFlow13 show ${Bridge}
${port_numbers} = String.Get Regexp Matches ${check} (\\d+).tun.* 1
Genius.Check Table0 Entry In a Dpn ${tools_ip} ${Bridge} ${port_numbers}
END
Verify Deleted Tunnels On OVS
- [Arguments] ${tunnel_list} ${resp_data}
[Documentation] This will verify whether tunnel is deleted.
+ [Arguments] ${tunnel_list} ${resp_data}
BuiltIn.Log ${resp_data}
FOR ${tunnel} IN @{tunnel_list}
BuiltIn.Should Not Contain ${resp_data} ${tunnel}
END
Verify Response Code Of Dpn End Point Config API
- [Arguments] ${dpn_list}=${DPN_ID_LIST}
[Documentation] This keyword will verify response code from itm-state: dpn endpoints config api for each dpn
+ [Arguments] ${dpn_list}=${DPN_ID_LIST}
FOR ${dpn} IN @{dpn_list}
- BuiltIn.Wait Until Keyword Succeeds 40 5 Utils.Get Data From URI session ${CONFIG_API}/itm-state:dpn-endpoints/DPN-TEPs-info/${dpn}/
+ BuiltIn.Wait Until Keyword Succeeds
+ ... 40
+ ... 5
+ ... Utils.Get Data From URI
+ ... session
+ ... ${CONFIG_API}/itm-state:dpn-endpoints/DPN-TEPs-info/${dpn}/
END
Get Tunnel Between DPNs
- [Arguments] ${tunnel_type} ${config_api_type} ${src_dpn_id} @{dst_dpn_ids}
[Documentation] This keyword will Get All the Tunnels available on DPN's
+ [Arguments] ${tunnel_type} ${config_api_type} ${src_dpn_id} @{dst_dpn_ids}
FOR ${dst_dpn_id} IN @{dst_dpn_ids}
${tunnel} = BuiltIn.Wait Until Keyword Succeeds 30 10 Genius.Get Tunnel ${src_dpn_id}
... ${dst_dpn_id} ${tunnel_type} ${config_api_type}
END
Update Dpn id List And Get Tunnels
- [Arguments] ${tunnel_type} ${config_api_type}=${EMPTY} ${dpn_ids}=${DPN_ID_LIST}
[Documentation] Update the exisisting dpn id list to form different combination of dpn ids such that tunnel formation between all dpns is verified.
+ [Arguments] ${tunnel_type} ${config_api_type}=${EMPTY} ${dpn_ids}=${DPN_ID_LIST}
FOR ${dpn_id} IN @{dpn_ids}
@{dpn_ids_updated} = BuiltIn.Create List @{dpn_ids}
Collections.Remove Values From List ${dpn_ids_updated} ${dpn_id}
Code Review / integration / test.git / blobdiff