+++ /dev/null
-*** Settings ***
-Documentation General Utils library. This library has broad scope, it can be used by any robot system tests.
-
-Library SSHLibrary
-Resource DevstackUtils.robot
-Resource OpenStackOperations.robot
-Resource SSHKeywords.robot
-Resource ../variables/Variables.robot
-
-
-*** Variables ***
-@{stable/queens_EXCLUSION_REGEXES} ${EMPTY}
-@{stable/rocky_EXCLUSION_REGEXES} ${EMPTY}
-@{stable/stein_EXCLUSION_REGEXES} ${EMPTY}
-@{master_EXCLUSION_REGEXES} ${EMPTY}
-${BLACKLIST_FILE} /tmp/blacklist.txt
-${TEMPEST_DIR} /opt/stack/tempest
-${TEMPEST_CONFIG_FILE} ${TEMPEST_DIR}/etc/tempest.conf
-# Parameter values below are based on releng/builder - changing them requires updates in releng/builder as well
-${TEMPEST_TIMEOUT} 420s
-
-
-*** Keywords ***
-Suite Setup
- OpenStackOperations.OpenStack Suite Setup
- Tempest.Log In To Tempest Executor And Setup Test Environment
-
-Run Tempest Tests
- [Arguments] ${tempest_regex} ${timeout}=${TEMPEST_TIMEOUT} ${debug}=False
- IF "${debug}" == "False"
- Tempest.Run Tempest Tests Without Debug ${tempest_regex} timeout=${timeout}
- END
- IF "${debug}" == "True"
- Tempest.Run Tempest Tests With Debug ${tempest_regex} timeout=${timeout}
- END
- IF "${debug}" != "True" and "${debug}" != "False"
- Fail debug argument must be True or False
- END
-
-Run Tempest Tests Without Debug
- [Documentation] Using ostestr will allow us to (by default) run tests in paralllel.
- ... Because of the parallel fashion, we must ensure there is no pause on teardown so that flag in tempest.conf is
- ... explicitly set to False.
- [Arguments] ${tempest_regex} ${TEMPEST_DIRectory}=${TEMPEST_DIR} ${timeout}=${TEMPEST_TIMEOUT}
- IF "skip_if_${OPENSTACK_BRANCH}" in @{TEST_TAGS} RETURN
- IF "skip_if_${SECURITY_GROUP_MODE}" in @{TEST_TAGS} RETURN
- IF "skip_if_${ODL_SNAT_MODE}" in @{TEST_TAGS} RETURN
- ${tempest_conn_id} = SSHLibrary.Open Connection ${OS_CNTL_IP} prompt=${DEFAULT_LINUX_PROMPT_STRICT}
- SSHKeywords.Flexible SSH Login ${OS_USER} ${DEVSTACK_SYSTEM_PASSWORD}
- DevstackUtils.Write Commands Until Prompt source ${DEVSTACK_DEPLOY_PATH}/openrc admin admin
- DevstackUtils.Write Commands Until Prompt cd ${TEMPEST_DIRectory}
- SSHLibrary.Read
- Tempest.Tempest Conf Modify Pause On Test Teardown False
- SSHLibrary.Set Client Configuration timeout=${timeout}
- # There are tons of deprecation error messages when we use ostestr in our CSIT environment (openstack via devstack)
- # The robot log files are very large and one culprit is all these deprecation warnings. If we redirect stderr to
- # /dev/null we should be able to ignore them. We will miss any other errors, however.
- ${output} = DevstackUtils.Write Commands Until Prompt And Log
- ... ostestr --regex ${tempest_regex}
- ... timeout=${timeout}
- SSHLibrary.Close Connection
- BuiltIn.Should Contain ${output} Failed: 0
-
-Run Tempest Tests With Debug
- [Documentation] After setting pause_teardown=True in tempest.conf, use the python -m testtools.run module to execute
- ... a single tempest test case. We need to run only one tempest test case at a time as there will
- ... be potentional for an unkown number of debug pdb() prompts to catch and continue if we are running multiple
- ... test cases with a single command. Essentially, this keyword only handles one breakpoint at a single teardown.
- [Arguments] ${tempest_regex} ${TEMPEST_DIRectory}=${TEMPEST_DIR} ${timeout}=${TEMPEST_TIMEOUT}
- IF "skip_if_${OPENSTACK_BRANCH}" in @{TEST_TAGS} RETURN
- IF "skip_if_${SECURITY_GROUP_MODE}" in @{TEST_TAGS} RETURN
- IF "skip_if_${ODL_SNAT_MODE}" in @{TEST_TAGS} RETURN
- ${tempest_conn_id} = SSHLibrary.Open Connection ${OS_CNTL_IP} prompt=${DEFAULT_LINUX_PROMPT_STRICT}
- SSHKeywords.Flexible SSH Login ${OS_USER} ${DEVSTACK_SYSTEM_PASSWORD}
- DevstackUtils.Write Commands Until Prompt source ${DEVSTACK_DEPLOY_PATH}/openrc admin admin
- DevstackUtils.Write Commands Until Prompt cd ${TEMPEST_DIRectory}
- SSHLibrary.Read
- Tempest Conf Modify Pause On Test Teardown True
- SSHLibrary.Set Client Configuration timeout=${timeout}
- SSHLibrary.Write python -m testtools.run ${tempest_regex}
- ${output} = SSHLibrary.Read Until Regexp ${DEFAULT_LINUX_PROMPT_STRICT}|pdb.set_trace()
- BuiltIn.Log ${output}
- OpenStackOperations.Show Debugs
- OpenStackOperations.Get Test Teardown Debugs
- SSHLibrary.Switch Connection ${tempest_conn_id}
- SSHLibrary.Write continue
- ${output} = SSHLibrary.Read Until Regexp ${DEFAULT_LINUX_PROMPT_STRICT}|pdb.set_trace()
- BuiltIn.Log ${output}
- SSHLibrary.Write continue
- ${output} = SSHLibrary.Read Until Prompt
- BuiltIn.Log ${output}
- SSHLibrary.Close Connection
- BuiltIn.Should Contain ${output} OK
- BuiltIn.Should Not Contain ${output} FAILED
-
-Log In To Tempest Executor And Setup Test Environment
- [Documentation] Initialize SetupUtils, open SSH connection to a devstack system and source the openstack
- ... credentials needed to run the tempest tests. The (sometimes empty) tempest blacklist file will be created
- ... and pushed to the tempest executor.
- Tempest.Create Blacklist File
- # Tempest tests need an existing external network in order to create routers.
- OpenStackOperations.Create Network
- ... ${EXTERNAL_NET_NAME}
- ... --external --default --provider-network-type flat --provider-physical-network ${PUBLIC_PHYSICAL_NETWORK}
- OpenStackOperations.Create Subnet
- ... ${EXTERNAL_NET_NAME}
- ... ${EXTERNAL_SUBNET_NAME}
- ... ${EXTERNAL_SUBNET}
- ... --gateway ${EXTERNAL_GATEWAY} --allocation-pool ${EXTERNAL_SUBNET_ALLOCATION_POOL}
- OpenStackOperations.List Networks
- ${control_node_conn_id} = SSHLibrary.Open Connection ${OS_CNTL_IP} prompt=${DEFAULT_LINUX_PROMPT_STRICT}
- SSHKeywords.Flexible SSH Login ${OS_USER}
- DevstackUtils.Write Commands Until Prompt And Log sudo pip install -U --verbose pip timeout=120s
- DevstackUtils.Write Commands Until Prompt And Log sudo pip install -U --verbose os-testr>=1.0.0 timeout=120s
- DevstackUtils.Write Commands Until Prompt And Log ostestr --version
- DevstackUtils.Write Commands Until Prompt And Log testr init
- DevstackUtils.Write Commands Until Prompt source ${DEVSTACK_DEPLOY_PATH}/openrc admin admin
- DevstackUtils.Write Commands Until Prompt sudo rm -rf /opt/stack/tempest/.testrepository
- ${net_id} = OpenStackOperations.Get Net Id ${EXTERNAL_NET_NAME}
- Tempest.Tempest Conf Add External Network And Floating Network Name ${net_id}
-
-Tempest Conf Add External Network And Floating Network Name
- [Documentation] Tempest will be run with a config file - this function will add the
- ... given external network ID to the configuration file.
- [Arguments] ${external_network_id}
- Tempest.Modify Config In File On Existing SSH Connection
- ... ${TEMPEST_CONFIG_FILE}
- ... set
- ... network
- ... public_network_id
- ... ${external_network_id}
- Tempest.Modify Config In File On Existing SSH Connection
- ... ${TEMPEST_CONFIG_FILE}
- ... set
- ... DEFAULT
- ... debug
- ... False
- Tempest.Modify Config In File On Existing SSH Connection
- ... ${TEMPEST_CONFIG_FILE}
- ... set
- ... DEFAULT
- ... log_level
- ... INFO
- Tempest.Modify Config In File On Existing SSH Connection
- ... ${TEMPEST_CONFIG_FILE}
- ... set
- ... network
- ... floating_network_name
- ... ${EXTERNAL_NET_NAME}
- DevstackUtils.Write Commands Until Prompt sudo cat ${TEMPEST_CONFIG_FILE}
- DevstackUtils.Write Commands Until Prompt sudo chmod 777 ${TEMPEST_CONFIG_FILE}
-
-Tempest Conf Modify Pause On Test Teardown
- [Documentation] Sets the DEFAULT section flag for pausing the test teardown. If True the tempest test case
- ... being executed will break to a pdb() debug shell when it hits it's teardown() function.
- [Arguments] ${pause_flag}
- Tempest.Modify Config In File On Existing SSH Connection
- ... ${TEMPEST_CONFIG_FILE}
- ... set
- ... DEFAULT
- ... pause_teardown
- ... ${pause_flag}
-
-Modify Config In File On Existing SSH Connection
- [Documentation] uses crudini to populate oslo cofg file.
- [Arguments] ${config_file} ${modifier} ${config_section} ${config_key} ${config_value}=${EMPTY}
- # this keyword is only one line so seems like extra overhead, but this may be a good candidate to move
- # to a library at some point, when/if other suites need to use it, so wanted to make it generic.
- DevstackUtils.Write Commands Until Prompt
- ... sudo -E crudini --${modifier} ${config_file} ${config_section} ${config_key} ${config_value}
-
-Create Blacklist File
- [Documentation] For each exclusion regex in the required @{${OPENSTACK_BRANCH}_EXCLUSION_REGEXES} list a new
- ... line will be created in the required ${BLACKLIST_FILE} location. This file is pushed to the OS_CONTROL_NODE
- ... which is assumed to be the tempest executor.
- OperatingSystem.Create File ${BLACKLIST_FILE}
- FOR ${exclusion} IN @{${OPENSTACK_BRANCH}_EXCLUSION_REGEXES}
- OperatingSystem.Append To File ${BLACKLIST_FILE} ${exclusion}\n
- END
- OperatingSystem.Log File ${BLACKLIST_FILE}
- SSHKeywords.Copy File To Remote System ${OS_CNTL_IP} ${BLACKLIST_FILE} ${BLACKLIST_FILE}