*** Settings ***
-Documentation BGP performance of ingesting from 1 iBGP peer, data change counter is NOT used.
+Documentation BGP performance of ingesting from 1 iBGP peer, data change counter is NOT used.
...
-... Copyright (c) 2016 Cisco Systems, Inc. and others. All rights reserved.
+... Copyright (c) 2016 Cisco Systems, Inc. and others. All rights reserved.
...
-... This program and the accompanying materials are made available under the
-... terms of the Eclipse Public License v1.0 which accompanies this distribution,
-... and is available at http://www.eclipse.org/legal/epl-v10.html
+... This program and the accompanying materials are made available under the
+... terms of the Eclipse Public License v1.0 which accompanies this distribution,
+... and is available at http://www.eclipse.org/legal/epl-v10.html
...
-... For propper usage of this resource ${config_session} varaible has to be set.
-... It should point to http://<ip-addr>:${RESTCONFPORT}.
-Library SSHLibrary timeout=10s
-Library RequestsLibrary
-Resource ../../../libraries/BGPcliKeywords.robot
-Resource ../../../libraries/BGPSpeaker.robot
-Resource ../../../libraries/ClusterAdmin.robot
-Resource ../../../libraries/ClusterManagement.robot
-Resource ../../../libraries/FailFast.robot
-Resource ../../../libraries/KillPythonTool.robot
-Resource ../../../libraries/PrefixCounting.robot
-Resource ../../../libraries/SetupUtils.robot
-Resource ../../../libraries/ShardStability.robot
-Resource ../../../libraries/SSHKeywords.robot
-Resource ../../../libraries/TemplatedRequests.robot
-Resource ../../../variables/Variables.robot
+... For propper usage of this resource ${config_session} varaible has to be set.
+... It should point to http://<ip-addr>:${RESTCONFPORT}.
+
+Library SSHLibrary timeout=10s
+Library RequestsLibrary
+Resource ../../../libraries/BGPcliKeywords.robot
+Resource ../../../libraries/BGPSpeaker.robot
+Resource ../../../libraries/ClusterAdmin.robot
+Resource ../../../libraries/ClusterManagement.robot
+Resource ../../../libraries/FailFast.robot
+Resource ../../../libraries/KillPythonTool.robot
+Resource ../../../libraries/PrefixCounting.robot
+Resource ../../../libraries/SetupUtils.robot
+Resource ../../../libraries/ShardStability.robot
+Resource ../../../libraries/SSHKeywords.robot
+Resource ../../../libraries/TemplatedRequests.robot
+Resource ../../../variables/Variables.robot
+
*** Variables ***
-${BGP_TOOL_LOG_LEVEL} info
-${BGP_PEER_FOLDER} ${CURDIR}/../../../variables/bgpclustering/bgp_peer_openconf # used for configuration of bgp peer via openconfig
-${BGP_VARIABLES_FOLDER} ${CURDIR}/../../../variables/bgpclustering/bgp_peer # used for configuration of bgp peer
-${BGP_VARIABLES_FOLDER_OP} ${CURDIR}/../../../variables/bgpclustering/bgp_peer_operational
-${CHECK_PERIOD} 10
-${HOLDTIME} 180
-${INSERT} 1
-${KARAF_LOG_LEVEL} INFO
-${KARAF_BGPCEP_LOG_LEVEL} ${KARAF_LOG_LEVEL}
-${KARAF_PROTOCOL_LOG_LEVEL} ${KARAF_BGPCEP_LOG_LEVEL}
-${PREFILL} 0
-${REPETITIONS} 1
-${RESULTS_FILE_NAME} bgp.csv
-${TEST_DURATION_MULTIPLIER} 1
-${UPDATE} single
-${WITHDRAW} 0
-${INITIAL_RESTCONF_TIMEOUT} 30s
-${KARAF_HOME} ${WORKSPACE}/${BUNDLEFOLDER}
-${SHARD_DEFAULT_CONFIG} shard-default-config
+${BGP_TOOL_LOG_LEVEL} info
+# used for configuration of bgp peer via openconfig
+${BGP_PEER_FOLDER}
+... ${CURDIR}/../../../variables/bgpclustering/bgp_peer_openconf
+# used for configuration of bgp peer
+${BGP_VARIABLES_FOLDER}
+... ${CURDIR}/../../../variables/bgpclustering/${ODL_STREAM}/bgp_peer
+${BGP_VARIABLES_FOLDER_OP} ${CURDIR}/../../../variables/bgpclustering/${ODL_STREAM}/bgp_peer_operational
+${CHECK_PERIOD} 10
+${HOLDTIME} 180
+${INSERT} 1
+${KARAF_LOG_LEVEL} INFO
+${KARAF_BGPCEP_LOG_LEVEL} ${KARAF_LOG_LEVEL}
+${KARAF_PROTOCOL_LOG_LEVEL} ${KARAF_BGPCEP_LOG_LEVEL}
+${PREFILL} 0
+${REPETITIONS} 1
+${RESULTS_FILE_NAME} bgp.csv
+${TEST_DURATION_MULTIPLIER} 1
+${UPDATE} single
+${WITHDRAW} 0
+${INITIAL_RESTCONF_TIMEOUT} 30s
+${KARAF_HOME} ${WORKSPACE}/${BUNDLEFOLDER}
+${SHARD_DEFAULT_CONFIG} shard-default-config
${SHARD_DEFAULT_OPERATIONAL} shard-default-operational
-${EXAMPLE_IPV4_TOPOLOGY} example-ipv4-topology
-${DEVICE_NAME} peer-controller-config
-${DEVICE_CHECK_TIMEOUT} 60s
-${RIB_INSTANCE} example-bgp-rib
-${PROTOCOL_OPENCONFIG} ${RIB_INSTANCE}
-${BGP_PEER_NAME} example-bgp-peer
-${PEER_CHECK_URL} /restconf/operational/bgp-rib:bgp-rib/rib/example-bgp-rib/peer/bgp:%2F%2F
-@{SHARD_MONITOR_LIST} default:config default:operational topology:config topology:operational inventory:config inventory:operational
+${EXAMPLE_IPV4_TOPOLOGY} example-ipv4-topology
+${DEVICE_NAME} peer-controller-config
+${DEVICE_CHECK_TIMEOUT} 60s
+${RIB_INSTANCE} example-bgp-rib
+${PROTOCOL_OPENCONFIG} ${RIB_INSTANCE}
+${BGP_PEER_NAME} example-bgp-peer
+@{SHARD_MONITOR_LIST}
+... default:config
+... default:operational
+... topology:config
+... topology:operational
+... inventory:config
+... inventory:operational
+
*** Keywords ***
Setup_Everything
SSHLibrary.Close_All_Connections
Start_Bgp_Peer
- [Arguments] ${peerip}=${rib_owner_node_id}
[Documentation] Starts bgp peer and verifies that the peer runs.
+ [Arguments] ${peerip}=${rib_owner_node_id}
# TODO: This keyword is not specific to prefix counting. Find a better place for it.
- BGPSpeaker.Start_BGP_Speaker --amount ${COUNT} --myip=${TOOLS_SYSTEM_IP} --myport=${BGP_TOOL_PORT} --peerip=${peerip} --peerport=${ODL_BGP_PORT} --insert=${INSERT} --withdraw=${WITHDRAW} --prefill ${PREFILL} --update ${UPDATE} --${BGP_TOOL_LOG_LEVEL} --results ${RESULTS_FILE_NAME}
+ BGPSpeaker.Start_BGP_Speaker
+ ... --amount ${COUNT} --myip=${TOOLS_SYSTEM_IP} --myport=${BGP_TOOL_PORT} --peerip=${peerip} --peerport=${ODL_BGP_PORT} --insert=${INSERT} --withdraw=${WITHDRAW} --prefill ${PREFILL} --update ${UPDATE} --${BGP_TOOL_LOG_LEVEL} --results ${RESULTS_FILE_NAME}
Start_Bgp_Peer_And_Verify_Connected
- [Arguments] ${connection_retries}=${1} ${peerip}=${rib_owner_node_id}
[Documentation] Starts the peer and verifies its connection. The verification is done by checking the presence
... of the peer in the bgp rib.
+ [Arguments] ${connection_retries}=${1} ${peerip}=${rib_owner_node_id}
# TODO: This keyword is not specific to prefix counting. Find a better place for it.
FOR ${idx} IN RANGE ${connection_retries}
Start_Bgp_Peer peerip=${peerip}
- ${status} ${value}= BuiltIn.Run_Keyword_And_Ignore_Error BuiltIn.Wait_Until_Keyword_Succeeds 3x 3s
- ... Verify_Bgp_Peer_Connection ${config_session} ${TOOLS_SYSTEM_IP} connected=${True}
- BuiltIn.Run_Keyword_Unless "${status}" == "PASS" BGPSpeaker.Kill_BGP_Speaker
- BuiltIn.Return_From_Keyword_If "${status}" == "PASS"
+ ${status} ${value} = BuiltIn.Run_Keyword_And_Ignore_Error
+ ... BuiltIn.Wait_Until_Keyword_Succeeds
+ ... 3x
+ ... 3s
+ ... Verify_Bgp_Peer_Connection
+ ... ${config_session}
+ ... ${TOOLS_SYSTEM_IP}
+ ... connected=${True}
+ IF "${status}" != "PASS" BGPSpeaker.Kill_BGP_Speaker
+ IF "${status}" == "PASS" RETURN
END
BuiltIn.Fail Unable to connect bgp peer to ODL
Verify_Bgp_Peer_Connection
- [Arguments] ${session} ${peer_ip} ${connected}=${True}
[Documentation] Checks peer presence in operational datastore
+ [Arguments] ${session} ${peer_ip} ${connected}=${True}
# TODO: This keyword is not specific to prefix counting. Find a better place for it.
- ${exp_status_code}= BuiltIn.Set_Variable_If ${connected} ${200} ${404}
- ${rsp}= RequestsLibrary.Get Request ${session} ${PEER_CHECK_URL}${peer_ip}
+ ${peer_check_url} = BuiltIn.Set_Variable ${REST_API}/bgp-rib:bgp-rib/rib=example-bgp-rib/peer=bgp:%2F%2F
+ ${exp_status_code} = BuiltIn.Set_Variable_If ${connected} ${200} ${404}
+ ${rsp} = RequestsLibrary.GET On Session ${session} ${peer_check_url}${peer_ip}?content=nonconfig expected_status=${exp_status_code}
BuiltIn.Log ${rsp.content}
- BuiltIn.Should_Be_Equal_As_Numbers ${exp_status_code} ${rsp.status_code}
Set_Shard_Leaders_Location_And_Verify
- [Arguments] ${requested_shard_localtion_idx}
[Documentation] Move default/topology config/operational shard location to local or remote node as requested
... towards the given rib singleton instance location.
+ [Arguments] ${requested_shard_localtion_idx}
ShardStability.Set_Shard_Location ${requested_shard_localtion_idx}
- BuiltIn.Wait_Until_Keyword_Succeeds 30s 5s ShardStability.Verify_Shard_Leader_Located_As_Expected ${requested_shard_localtion_idx} http_timeout=125
+ BuiltIn.Wait_Until_Keyword_Succeeds
+ ... 30s
+ ... 5s
+ ... ShardStability.Verify_Shard_Leader_Located_As_Expected
+ ... ${requested_shard_localtion_idx}
+ ... http_timeout=125
${init_shard_details} = ShardStability.Shards_Stability_Get_Details ${SHARD_MONITOR_LIST}
BuiltIn.Set_Suite_Variable ${init_shard_details}