*** Settings ***
-Documentation BGP performance of ingesting from many iBGP peers, data change counter is used.
+Documentation BGP performance of ingesting from many iBGP peers, data change counter is used.
...
-... Copyright (c) 2015 Cisco Systems, Inc. and others. All rights reserved.
+... Copyright (c) 2018 Cisco Systems, Inc. and others. All rights reserved.
...
-... This program and the accompanying materials are made available under the
-... terms of the Eclipse Public License v1.0 which accompanies this distribution,
-... and is available at http://www.eclipse.org/legal/epl-v10.html
+... This program and the accompanying materials are made available under the
+... terms of the Eclipse Public License v1.0 which accompanies this distribution,
+... and is available at http://www.eclipse.org/legal/epl-v10.html
...
...
-... This suite uses play.py processes as iBGP peers.
-... This is analogue of single peer performance suite, which uses many peers.
-... Each peer is of ibgp type, and they contribute to the same example-bgp-rib,
-... and thus to the same single example-ipv4-topology.
-... The suite only looks at example-ipv4-topology, so RIB is not examined.
+... This suite uses play.py processes as iBGP peers.
+... This is analogue of single peer performance suite, which uses many peers.
+... Each peer is of ibgp type, and they contribute to the same example-bgp-rib,
+... and thus to the same single example-ipv4-topology.
+... The suite only looks at example-ipv4-topology, so RIB is not examined.
...
-... This suite requires odl-bgpcep-data-change-counter to be installed so
-... make sure it is added to "install-features" of any jobs that are going to invoke it.
-... Use the other version of the suite (manypeers_prefixcount.robot) if the feature does not work.
+... This suite requires odl-bgpcep-data-change-counter to be installed so
+... make sure it is added to "install-features" of any jobs that are going to invoke it.
+... Use the other version of the suite (manypeers_prefixcount.robot) if the feature does not work.
...
-... The suite consists of two halves, differing on which side initiates BGP connection.
-... Data change counter is a lightweight way to detect "work is being done".
-... WaitUtils provide a nice Keyword to wait for stability, but it needs
-... initial value, that is why Store_Change_Count appears just before work-inducing action.
-... The time for Wait_For_Stable_* cases to finish is the main performance metric.
-... After waiting for stability is done, full check on number of prefixes present is performed.
+... The suite consists of two halves, differing on which side initiates BGP connection.
+... Data change counter is a lightweight way to detect "work is being done".
+... WaitUtils provide a nice Keyword to wait for stability, but it needs
+... initial value, that is why Store_Change_Count appears just before work-inducing action.
+... The time for Wait_For_Stable_* cases to finish is the main performance metric.
+... After waiting for stability is done, full check on number of prefixes present is performed.
...
-... TODO: Currently, if a bug causes zero increase of data changes,
-... affected test cases will wait for max time. Reconsider.
-... If zero increase is allowed as stable, higher number of repetitions should be required.
+... TODO: Currently, if a bug causes zero increase of data changes,
+... affected test cases will wait for max time. Reconsider.
+... If zero increase is allowed as stable, higher number of repetitions should be required.
...
-... ODL distinguishes peers by their IP addresses.
-... Currently, this suite requires python utils to be started on ODL System,
-... to guarantee IP address block is available for them to bind to.
-... TODO: Figure out how to use Docker and docker IP pool available in RelEng.
+... ODL distinguishes peers by their IP addresses.
+... Currently, this suite requires python utils to be started on ODL System,
+... to guarantee IP address block is available for them to bind to.
+... TODO: Figure out how to use Docker and docker IP pool available in RelEng.
...
-... Currently, 127.0.0.1 is hardcoded as the first peer address to use.
-... TODO: Figure out how to make it configurable.
-... As peer IP adresses are set incrementally, we need ipaddr to be used in Robot somehow.
+... Currently, 127.0.0.1 is hardcoded as the first peer address to use.
+... TODO: Figure out how to make it configurable.
+... As peer IP adresses are set incrementally, we need ipaddr to be used in Robot somehow.
...
-... Brief description how to configure BGP peer can be found here:
-... https://wiki.opendaylight.org/view/BGP_LS_PCEP:User_Guide#BGP_Peer
-... http://docs.opendaylight.org/en/stable-boron/user-guide/bgp-user-guide.html#bgp-peering
-... The peer configuration depends on the ${ODL_STREAM}. For "boron" and older streams it uses netconf connector and
-... for carbon and further it configures peer via openconfig.
+... Brief description how to configure BGP peer can be found here:
+... https://wiki.opendaylight.org/view/BGP_LS_PCEP:User_Guide#BGP_Peer
+... http://docs.opendaylight.org/en/stable-boron/user-guide/bgp-user-guide.html#bgp-peering
...
-... TODO: Is there a need for version of this suite where ODL connects to pers?
-... Note that configuring ODL is slow, which may affect measured performance singificantly.
-... Advanced TODO: Give manager ability to start pushing on trigger long after connections are established.
-Suite Setup Setup_Everything
-Suite Teardown Teardown_Everything
-Test Setup SetupUtils.Setup_Test_With_Logging_And_Fast_Failing
-Test Teardown SetupUtils.Teardown_Test_Show_Bugs_And_Start_Fast_Failing_If_Test_Failed
-Library DateTime
-Library RequestsLibrary
-Library SSHLibrary timeout=10s
-Variables ${CURDIR}/../../../variables/Variables.py
-Resource ${CURDIR}/../../../libraries/BGPSpeaker.robot
-Resource ${CURDIR}/../../../libraries/ChangeCounter.robot
-Resource ${CURDIR}/../../../libraries/FailFast.robot
-Resource ${CURDIR}/../../../libraries/KillPythonTool.robot
-Resource ${CURDIR}/../../../libraries/PrefixCounting.robot
-Resource ${CURDIR}/../../../libraries/SetupUtils.robot
-Resource ${CURDIR}/../../../libraries/SSHKeywords.robot
-Resource ${CURDIR}/../../../libraries/TemplatedRequests.robot
+... TODO: Is there a need for version of this suite where ODL connects to pers?
+... Note that configuring ODL is slow, which may affect measured performance singificantly.
+... Advanced TODO: Give manager ability to start pushing on trigger long after connections are established.
+
+Library DateTime
+Library RequestsLibrary
+Library SSHLibrary timeout=10s
+Resource ../../../libraries/BGPcliKeywords.robot
+Resource ../../../libraries/BGPSpeaker.robot
+Resource ../../../libraries/ChangeCounter.robot
+Resource ../../../libraries/CompareStream.robot
+Resource ../../../libraries/FailFast.robot
+Resource ../../../libraries/KarafKeywords.robot
+Resource ../../../libraries/KillPythonTool.robot
+Resource ../../../libraries/PrefixCounting.robot
+Resource ../../../libraries/SetupUtils.robot
+Resource ../../../libraries/SSHKeywords.robot
+Resource ../../../libraries/TemplatedRequests.robot
+Resource ../../../libraries/Utils.robot
+Resource ../../../variables/Variables.robot
+
+Suite Setup Setup_Everything
+Suite Teardown Teardown_Everything
+Test Setup SetupUtils.Setup_Test_With_Logging_And_Fast_Failing
+Test Teardown SetupUtils.Teardown_Test_Show_Bugs_And_Start_Fast_Failing_If_Test_Failed
+
*** Variables ***
-${BGP_TOOL_LOG_LEVEL} info
-${BGP_VARIABLES_FOLDER} ${CURDIR}/../../../variables/bgpuser/
-${CHECK_PERIOD} 1
-${CHECK_PERIOD_CHANGE_COUNT} ${CHECK_PERIOD}
-${CHECK_PERIOD_CHANGE_COUNT_MANY} ${CHECK_PERIOD_CHANGE_COUNT}
-${COUNT} 1000000
-${COUNT_CHANGE_COUNT} ${COUNT}
-${COUNT_CHANGE_COUNT_MANY} ${COUNT_CHANGE_COUNT}
-${FIRST_PEER_IP} 127.0.0.1
-${HOLDTIME} 180
-${HOLDTIME_CHANGE_COUNT} ${HOLDTIME}
-${HOLDTIME_CHANGE_COUNT_MANY} ${HOLDTIME_CHANGE_COUNT}
-${KARAF_LOG_LEVEL} INFO
-${KARAF_BGPCEP_LOG_LEVEL} ${KARAF_LOG_LEVEL}
-${KARAF_PROTOCOL_LOG_LEVEL} ${KARAF_BGPCEP_LOG_LEVEL}
-${MULTIPLICITY} 2 # May be increased after Bug 4488 is fixed.
-${MULTIPLICITY_CHANGE_COUNT} ${MULTIPLICITY}
-${MULTIPLICITY_CHANGE_COUNT_MANY} ${MULTIPLICITY_CHANGE_COUNT}
-${NETCONF_DEV_FOLDER} ${CURDIR}/../../../variables/netconf/device/full-uri-device
-${NETCONF_MOUNT_FOLDER} ${CURDIR}/../../../variables/netconf/device/full-uri-mount
-${REPETITIONS} 1 # Should be increased depending on multiplicity.
-${REPETITIONS_CHANGE_COUNT} ${REPETITIONS}
-${REPETITIONS_CHANGE_COUNT_MANY} ${REPETITIONS_CHANGE_COUNT}
-${TEST_DURATION_MULTIPLIER} 1
-${TEST_DURATION_MULTIPLIER_CHANGE_COUNT} ${TEST_DURATION_MULTIPLIER}
-${TEST_DURATION_MULTIPLIER_CHANGE_COUNT_MANY} ${TEST_DURATION_MULTIPLIER_CHANGE_COUNT}
-${RIB_INSTANCE} example-bgp-rib
-${PROTOCOL_OPENCONFIG} ${RIB_INSTANCE}
-${DEVICE_NAME} controller-config
+${BGP_TOOL_LOG_LEVEL} info
+${BGP_VARIABLES_FOLDER} ${CURDIR}/../../../variables/bgpuser/
+${CHECK_PERIOD} 60
+${CHECK_PERIOD_CHANGE_COUNT} ${CHECK_PERIOD}
+${CHECK_PERIOD_CHANGE_COUNT_MANY} ${CHECK_PERIOD_CHANGE_COUNT}
+${COUNT} 600000
+${COUNT_CHANGE_COUNT} ${COUNT}
+${COUNT_CHANGE_COUNT_MANY} ${COUNT_CHANGE_COUNT}
+${FIRST_PEER_IP} 127.0.0.1
+${HOLDTIME} 180
+${HOLDTIME_CHANGE_COUNT} ${HOLDTIME}
+${HOLDTIME_CHANGE_COUNT_MANY} ${HOLDTIME_CHANGE_COUNT}
+${KARAF_LOG_LEVEL} INFO
+${KARAF_BGPCEP_LOG_LEVEL} ${KARAF_LOG_LEVEL}
+${KARAF_PROTOCOL_LOG_LEVEL} ${KARAF_BGPCEP_LOG_LEVEL}
+${MULTIPLICITY} 2 # May be increased after Bug 4488 is fixed.
+${MULTIPLICITY_CHANGE_COUNT} ${MULTIPLICITY}
+${MULTIPLICITY_CHANGE_COUNT_MANY} ${MULTIPLICITY_CHANGE_COUNT}
+${PEER_GROUP} internal-neighbors
+${REPETITIONS} 1 # Should be increased depending on multiplicity.
+${REPETITIONS_CHANGE_COUNT} ${REPETITIONS}
+${REPETITIONS_CHANGE_COUNT_MANY} ${REPETITIONS_CHANGE_COUNT}
+${TEST_DURATION_MULTIPLIER} 1
+${TEST_DURATION_MULTIPLIER_CHANGE_COUNT} ${TEST_DURATION_MULTIPLIER}
+${TEST_DURATION_MULTIPLIER_CHANGE_COUNT_MANY} ${TEST_DURATION_MULTIPLIER_CHANGE_COUNT}
+${RIB_INSTANCE} example-bgp-rib
+${PROTOCOL_OPENCONFIG} ${RIB_INSTANCE}
+${DEVICE_NAME} controller-config
# TODO: Option names can be better.
-${last_change_count_many} -1
+${last_change_count_many} 1
+
*** Test Cases ***
Check_For_Empty_Ipv4_Topology_Before_Talking
# TODO: Choose which tags to assign and make sure they are assigned correctly.
BuiltIn.Wait_Until_Keyword_Succeeds 120s 1s PrefixCounting.Check_Ipv4_Topology_Is_Empty
-Configure_Netconf_Device
- [Documentation] Configures netconf device if ${USE_NETCONF_CONNECTOR} is False.
- BuiltIn.Run_Keyword_If """${USE_NETCONF_CONNECTOR}""" == """True""" BuiltIn.Pass_Execution No need to configure netconf device because netconf connector is present.
- &{mapping} BuiltIn.Create_Dictionary DEVICE_NAME=${DEVICE_NAME} DEVICE_PORT=1830 DEVICE_IP=${ODL_SYSTEM_IP} DEVICE_USER=admin DEVICE_PASSWORD=admin
- TemplatedRequests.Put_As_Xml_Templated ${NETCONF_DEV_FOLDER} mapping=${mapping}
- BuiltIn.Wait_Until_Keyword_Succeeds 10x 3s TemplatedRequests.Get_As_Xml_Templated ${NETCONF_MOUNT_FOLDER} mapping=${mapping}
-
Reconfigure_ODL_To_Accept_Connections
[Documentation] Configure BGP peer modules with initiate-connection set to false.
- : FOR ${index} IN RANGE 1 ${MULTIPLICITY_CHANGE_COUNT_MANY}+1
- \ ${peer_name} = BuiltIn.Set_Variable example-bgp-peer-${index}
- \ ${peer_ip} = BuiltIn.Evaluate str(ipaddr.IPAddress('${FIRST_PEER_IP}') + ${index} - 1) modules=ipaddr
- \ &{mapping} Create Dictionary DEVICE_NAME=${DEVICE_NAME} BGP_NAME=${peer_name} IP=${peer_ip} HOLDTIME=${HOLDTIME_CHANGE_COUNT_MANY}
- \ ... PEER_PORT=${BGP_TOOL_PORT} INITIATE=false BGP_RIB=${RIB_INSTANCE} PASSIVE_MODE=true BGP_RIB_OPENCONFIG=${PROTOCOL_OPENCONFIG}
- \ ... RIB_INSTANCE_NAME=${RIB_INSTANCE}
- \ TemplatedRequests.Put_As_Xml_Templated ${BGP_VARIABLES_FOLDER}${/}bgp_peer mapping=${mapping}
- # FIXME: Add testcase to change bgpcep and protocol log levels, when a Keyword that does it without messing with current connection is ready.
-
-Wait_For_Data_Change_Counter_Ready
- [Documentation] Data change counter might have been slower to start than ipv4 topology, wait for it.
- BuiltIn.Wait_Until_Keyword_Succeeds 180s 1s ChangeCounter.Get_Change_Count
+ ... It sets peer-group as template, and than sets all neighbors using it.
+ Configure_Peer_Group
+ FOR ${index} IN RANGE 1 ${MULTIPLICITY_CHANGE_COUNT_MANY}+1
+ ${peer_name} = BuiltIn.Set_Variable example-bgp-peer-${index}
+ ${peer_ip} = BuiltIn.Evaluate str(ipaddr.IPAddress('${FIRST_PEER_IP}') + ${index} - 1) modules=ipaddr
+ &{mapping} = Create Dictionary
+ ... DEVICE_NAME=${DEVICE_NAME}
+ ... BGP_NAME=${peer_name}
+ ... IP=${peer_ip}
+ ... HOLDTIME=${HOLDTIME_CHANGE_COUNT_MANY}
+ ... PEER_PORT=${BGP_TOOL_PORT}
+ ... INITIATE=false
+ ... BGP_RIB=${RIB_INSTANCE}
+ ... PASSIVE_MODE=true
+ ... BGP_RIB_OPENCONFIG=${PROTOCOL_OPENCONFIG}
+ ... RIB_INSTANCE_NAME=${RIB_INSTANCE}
+ ... PEER_GROUP_NAME=${PEER_GROUP}
+ ... RR_CLIENT=false
+ TemplatedRequests.Put_As_Xml_Templated ${BGP_VARIABLES_FOLDER}${/}bgp_peer_group mapping=${mapping}
+ # FIXME: Add testcase to change bgpcep and protocol log levels, when a Keyword that does it without messing with current connection is ready.
+ END
Reconfigure_Data_Change_Counter
[Documentation] Configure data change counter to count transactions in example-ipv4-topology instead of example-linkstate-topology.
ChangeCounter.Reconfigure_Topology_Name example-ipv4-topology
+Verify_For_Data_Change_Counter_Ready
+ [Documentation] Data change counter might have been slower to start than ipv4 topology, wait for it.
+ BuiltIn.Wait_Until_Keyword_Succeeds 5s 1s ChangeCounter.Get_Change_Count
+
Change_Karaf_Logging_Levels
[Documentation] We may want to set more verbose logging here after configuration is done.
- KarafKeywords.Set_Bgpcep_Log_Levels bgpcep_level=${KARAF_BGPCEP_LOG_LEVEL} protocol_level=${KARAF_PROTOCOL_LOG_LEVEL}
+ KarafKeywords.Set_Bgpcep_Log_Levels
+ ... bgpcep_level=${KARAF_BGPCEP_LOG_LEVEL}
+ ... protocol_level=${KARAF_PROTOCOL_LOG_LEVEL}
Start_Talking_BGP_Manager
[Documentation] Start Python manager to connect speakers to ODL.
Store_Change_Count
# Myport value is needed for checking whether connection at precise port was established.
- BGPSpeaker.Start_BGP_Manager --amount=${COUNT_CHANGE_COUNT_MANY} --multiplicity=${MULTIPLICITY_CHANGE_COUNT_MANY} --myip=${FIRST_PEER_IP} --myport=${BGP_TOOL_PORT} --peerip=${ODL_SYSTEM_IP} --peerport=${ODL_BGP_PORT}
+ BGPSpeaker.Start_BGP_Manager
+ ... --amount=${COUNT_CHANGE_COUNT_MANY} --multiplicity=${MULTIPLICITY_CHANGE_COUNT_MANY} --myip=${FIRST_PEER_IP} --myport=${BGP_TOOL_PORT} --peerip=${ODL_SYSTEM_IP} --peerport=${ODL_BGP_PORT}
Wait_For_Stable_Talking_Ipv4_Topology
[Documentation] Wait until example-ipv4-topology becomes stable. This is done by checking stability of the change counter.
- ChangeCounter.Wait_For_Change_Count_To_Become_Stable timeout=${bgp_filling_timeout} period=${CHECK_PERIOD_CHANGE_COUNT_MANY} repetitions=${REPETITIONS_CHANGE_COUNT_MANY} count_to_overcome=${last_change_count_many}
+ ChangeCounter.Wait_For_Change_Count_To_Become_Stable
+ ... timeout=${bgp_filling_timeout}
+ ... period=${CHECK_PERIOD_CHANGE_COUNT_MANY}
+ ... repetitions=${REPETITIONS_CHANGE_COUNT_MANY}
+ ... count_to_overcome=${last_change_count_many}
Check_Talking_Ipv4_Topology_Count
[Documentation] Count the routes in example-ipv4-topology and fail if the count is not correct.
[Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
Store_Change_Count
BGPSpeaker.Kill_BGP_Speaker
+ BGPcliKeywords.Store_File_To_Workspace play.py.out manypeers_cc_play.log
FailFast.Do_Not_Fail_Fast_From_Now_On
# NOTE: It is still possible to remain failing fast, if both previous and this test have failed.
[Teardown] SetupUtils.Teardown_Test_Show_Bugs_If_Test_Failed
Wait_For_Stable_Ipv4_Topology_After_Talking
[Documentation] Wait until example-ipv4-topology becomes stable again.
[Tags] critical
- ChangeCounter.Wait_For_Change_Count_To_Become_Stable timeout=${bgp_filling_timeout} period=${CHECK_PERIOD_CHANGE_COUNT_MANY} repetitions=${REPETITIONS_CHANGE_COUNT_MANY} count_to_overcome=${last_change_count_many}
+ ChangeCounter.Wait_For_Change_Count_To_Become_Stable
+ ... timeout=${bgp_filling_timeout}
+ ... period=${CHECK_PERIOD_CHANGE_COUNT_MANY}
+ ... repetitions=${REPETITIONS_CHANGE_COUNT_MANY}
+ ... count_to_overcome=${last_change_count_many}
Check_For_Empty_Ipv4_Topology_After_Talking
[Documentation] Example-ipv4-topology should be empty now.
[Documentation] Revert the BGP configuration to the original state: without any configured peers.
[Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
# TODO: Is it useful to extract peer naming logic to separate Keyword?
- : FOR ${index} IN RANGE 1 ${MULTIPLICITY_CHANGE_COUNT_MANY}+1
- \ ${peer_name} = BuiltIn.Set_Variable example-bgp-peer-${index}
- \ ${peer_ip} = BuiltIn.Evaluate str(ipaddr.IPAddress('${FIRST_PEER_IP}') + ${index} - 1) modules=ipaddr
- \ &{mapping} BuiltIn.Create_Dictionary DEVICE_NAME=${DEVICE_NAME} BGP_NAME=${peer_name} IP=${peer_ip} BGP_RIB_OPENCONFIG=${PROTOCOL_OPENCONFIG}
- \ TemplatedRequests.Delete_Templated ${BGP_VARIABLES_FOLDER}${/}bgp_peer mapping=${mapping}
-
-Remove_Netconf_Device
- [Documentation] Removes netconf device if ${USE_NETCONF_CONNECTOR} is False.
- [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
- BuiltIn.Run_Keyword_If """${USE_NETCONF_CONNECTOR}""" == """True""" BuiltIn.Pass_Execution No need to remove netconf device because netconf connector is present.
- &{mapping} BuiltIn.Create_Dictionary DEVICE_NAME=${DEVICE_NAME} DEVICE_PORT=1830 DEVICE_IP=${ODL_SYSTEM_IP} DEVICE_USER=admin DEVICE_PASSWORD=admin
- TemplatedRequests.Delete_Templated ${NETCONF_DEV_FOLDER} mapping=${mapping}
+ FOR ${index} IN RANGE 1 ${MULTIPLICITY_CHANGE_COUNT_MANY}+1
+ ${peer_name} = BuiltIn.Set_Variable example-bgp-peer-${index}
+ ${peer_ip} = BuiltIn.Evaluate str(ipaddr.IPAddress('${FIRST_PEER_IP}') + ${index} - 1) modules=ipaddr
+ &{mapping} = BuiltIn.Create_Dictionary
+ ... DEVICE_NAME=${DEVICE_NAME}
+ ... BGP_NAME=${peer_name}
+ ... IP=${peer_ip}
+ ... BGP_RIB_OPENCONFIG=${PROTOCOL_OPENCONFIG}
+ ... PEER_GROUP_NAME=${PEER_GROUP}
+ ... RR_CLIENT=false
+ TemplatedRequests.Delete_Templated ${BGP_VARIABLES_FOLDER}${/}bgp_peer_group mapping=${mapping}
+ END
+ Deconfigure_Peer_Group
+
*** Keywords ***
Setup_Everything
ChangeCounter.CC_Setup
PrefixCounting.PC_Setup
KarafKeywords.Open Controller Karaf Console On Background
- RequestsLibrary.Create_Session operational http://${ODL_SYSTEM_IP}:${RESTCONFPORT} auth=${AUTH} timeout=125 max_retries=0
+ RequestsLibrary.Create_Session
+ ... operational
+ ... http://${ODL_SYSTEM_IP}:${RESTCONFPORT}
+ ... auth=${AUTH}
+ ... timeout=125
+ ... max_retries=0
# TODO: Do not include slash in ${OPERATIONAL_TOPO_API}, having it typed here is more readable.
# TODO: Alternatively, create variable in Variables which starts with http.
# Both TODOs would probably need to update every suite relying on current Variables.
SSHLibrary.Put_File ${CURDIR}/../../../../tools/fastbgp/play.py
# Calculate the timeout value based on how many routes are going to be pushed
${period} = DateTime.Convert_Time ${CHECK_PERIOD_CHANGE_COUNT_MANY} result_format=number
- ${timeout} = BuiltIn.Evaluate ${TEST_DURATION_MULTIPLIER_CHANGE_COUNT_MANY} * (${COUNT_CHANGE_COUNT_MANY} * 3.0 / 10000 + ${period} * (${REPETITIONS_CHANGE_COUNT_MANY} + 1)) + 20
+ ${timeout} = BuiltIn.Evaluate
+ ... ${TEST_DURATION_MULTIPLIER_CHANGE_COUNT_MANY} * (${COUNT_CHANGE_COUNT_MANY} * 3.0 / 10000 + ${period} * (${REPETITIONS_CHANGE_COUNT_MANY} + 1)) + 20
Builtin.Set_Suite_Variable ${bgp_filling_timeout} ${timeout}
- ${timeout} = BuiltIn.Evaluate ${TEST_DURATION_MULTIPLIER_CHANGE_COUNT_MANY} * (${COUNT_CHANGE_COUNT_MANY} * 2.0 / 10000 + ${period} * (${REPETITIONS_CHANGE_COUNT_MANY} + 1)) + 20
+ ${timeout} = BuiltIn.Evaluate
+ ... ${TEST_DURATION_MULTIPLIER_CHANGE_COUNT_MANY} * (${COUNT_CHANGE_COUNT_MANY} * 2.0 / 10000 + ${period} * (${REPETITIONS_CHANGE_COUNT_MANY} + 1)) + 20
Builtin.Set_Suite_Variable ${bgp_emptying_timeout} ${timeout}
KarafKeywords.Execute_Controller_Karaf_Command_On_Background log:set ${KARAF_LOG_LEVEL}
[Documentation] Make sure Python tool was killed and tear down imported Resources.
# Environment issue may have dropped the SSH connection, but we do not want Teardown to fail.
BuiltIn.Run_Keyword_And_Ignore_Error KillPythonTool.Search_And_Kill_Remote_Python 'play\.py'
+ BuiltIn.Run_Keyword_And_Ignore_Error Utils.Get_Sysstat_Statistics
RequestsLibrary.Delete_All_Sessions
SSHLibrary.Close_All_Connections
Store_Change_Count
[Documentation] Get the count of changes from BGP change counter. Ignore error or store the value.
${status} ${count} = BuiltIn.Run_Keyword_And_Ignore_Error ChangeCounter.Get_Change_Count
- BuiltIn.Run_Keyword_If '${status}' == 'PASS' BuiltIn.Set_Suite_Variable ${last_change_count_many} ${count}
+ IF '${status}' == 'PASS'
+ BuiltIn.Set_Suite_Variable ${last_change_count_many} ${count}
+ END
+
+Configure_Peer_Group
+ [Documentation] Configures peer group which is template for all the neighbors which are going
+ ... to be configured. Also after PUT, this case verifies presence of peer group within
+ ... peer-groups.
+ &{mapping} = Create Dictionary
+ ... DEVICE_NAME=${DEVICE_NAME}
+ ... HOLDTIME=${HOLDTIME_CHANGE_COUNT_MANY}
+ ... PEER_PORT=${BGP_TOOL_PORT}
+ ... INITIATE=false
+ ... BGP_RIB=${RIB_INSTANCE}
+ ... PASSIVE_MODE=true
+ ... BGP_RIB_OPENCONFIG=${PROTOCOL_OPENCONFIG}
+ ... RIB_INSTANCE_NAME=${RIB_INSTANCE}
+ ... PEER_GROUP_NAME=${PEER_GROUP}
+ ... RR_CLIENT=false
+ ${verify_peer_group_folder} = CompareStream.Run_Keyword_If_At_Least_Else
+ ... sulfur
+ ... BuiltIn.Set Variable
+ ... verify_peer_group.sulfur
+ ... ELSE
+ ... BuiltIn.Set Variable
+ ... verify_peer_group
+ TemplatedRequests.Put_As_Xml_Templated ${BGP_VARIABLES_FOLDER}${/}peer_group mapping=${mapping}
+ TemplatedRequests.Get_As_Json_Templated
+ ... ${BGP_VARIABLES_FOLDER}${/}${verify_peer_group_folder}
+ ... mapping=${mapping}
+ ... verify=True
+
+Deconfigure_Peer_Group
+ [Documentation] Deconfigures peer group which is template for all the neighbors.
+ &{mapping} = Create Dictionary
+ ... DEVICE_NAME=${DEVICE_NAME}
+ ... HOLDTIME=${HOLDTIME_CHANGE_COUNT_MANY}
+ ... PEER_PORT=${BGP_TOOL_PORT}
+ ... INITIATE=false
+ ... BGP_RIB=${RIB_INSTANCE}
+ ... PASSIVE_MODE=true
+ ... BGP_RIB_OPENCONFIG=${PROTOCOL_OPENCONFIG}
+ ... RIB_INSTANCE_NAME=${RIB_INSTANCE}
+ ... PEER_GROUP_NAME=${PEER_GROUP}
+ ... RR_CLIENT=false
+ TemplatedRequests.Delete_Templated ${BGP_VARIABLES_FOLDER}${/}peer_group mapping=${mapping}
Code Review / integration / test.git / blobdiff