*** Settings ***
-Documentation BGP performance of ingesting from 1 iBGP peer, data change counter is used.
+Documentation BGP performance of ingesting from 1 iBGP peer, data change counter is used.
...
-... Copyright (c) 2015 Cisco Systems, Inc. and others. All rights reserved.
+... Copyright (c) 2015 Cisco Systems, Inc. and others. All rights reserved.
...
-... This program and the accompanying materials are made available under the
-... terms of the Eclipse Public License v1.0 which accompanies this distribution,
-... and is available at http://www.eclipse.org/legal/epl-v10.html
+... This program and the accompanying materials are made available under the
+... terms of the Eclipse Public License v1.0 which accompanies this distribution,
+... and is available at http://www.eclipse.org/legal/epl-v10.html
...
...
-... This suite uses play.py as single iBGP peer.
-... The suite only looks at example-ipv4-topology, so RIB is not examined.
+... This suite uses play.py as single iBGP peer.
+... The suite only looks at example-ipv4-topology, so RIB is not examined.
...
-... This suite requires odl-bgpcep-data-change-counter to be installed so
-... make sure it is added to "install-features" of any jobs that are going
-... to invoke it.
+... This suite requires odl-bgpcep-data-change-counter to be installed so
+... make sure it is added to "install-features" of any jobs that are going
+... to invoke it.
...
-... The suite consists of two halves, differing on which side initiates BGP connection.
-... Data change counter is a lightweight way to detect "work is being done".
-... WaitUtils provide a nice Keyword to wait for stability, but it needs
-... initial value, that is why Store_Change_Count appears just before work-inducing action.
-... The time for Wait_For_Stable_* cases to finish is the main performance metric.
-... After waiting for stability is done, full check on number of prefixes present is performed.
+... The suite consists of two halves, differing on which side initiates BGP connection.
+... Data change counter is a lightweight way to detect "work is being done".
+... WaitUtils provide a nice Keyword to wait for stability, but it needs
+... initial value, that is why Store_Change_Count appears just before work-inducing action.
+... The time for Wait_For_Stable_* cases to finish is the main performance metric.
+... After waiting for stability is done, full check on number of prefixes present is performed.
...
-... TODO: Currently, if a bug causes zero increase of data changes,
-... affected test cases will wait for max time. Reconsider.
-... If zero increase is allowed as stable, higher number of repetitions should be required.
+... Brief description how to configure BGP peer can be found here:
+... https://wiki.opendaylight.org/view/BGP_LS_PCEP:User_Guide#BGP_Peer
+... http://docs.opendaylight.org/en/stable-boron/user-guide/bgp-user-guide.html#bgp-peering
...
-... Additionally this test suite is not compatible with Helium and Hydrogen
-... releases as they don't include data change counter feature.
-... Use the other version of the suite (singlepeer_prefixcount.robot) to test them.
-Suite Setup Setup_Everything
-Suite Teardown Teardown_Everything
-Test Setup SetupUtils.Setup_Test_With_Logging_And_Fast_Failing
-Test Teardown SetupUtils.Teardown_Test_Show_Bugs_And_Start_Fast_Failing_If_Test_Failed
-Library SSHLibrary timeout=10s
-Library RequestsLibrary
-Variables ${CURDIR}/../../../variables/Variables.py
-Resource ${CURDIR}/../../../libraries/BGPSpeaker.robot
-Resource ${CURDIR}/../../../libraries/ChangeCounter.robot
-Resource ${CURDIR}/../../../libraries/ConfigViaRestconf.robot
-Resource ${CURDIR}/../../../libraries/FailFast.robot
-Resource ${CURDIR}/../../../libraries/KillPythonTool.robot
-Resource ${CURDIR}/../../../libraries/PrefixCounting.robot
-Resource ${CURDIR}/../../../libraries/SetupUtils.robot
-Resource ${CURDIR}/../../../libraries/SSHKeywords.robot
+... TODO: Currently, if a bug causes zero increase of data changes,
+... affected test cases will wait for max time. Reconsider.
+... If zero increase is allowed as stable, higher number of repetitions should be required.
+...
+... Additionally this test suite is not compatible with Helium and Hydrogen
+... releases as they don't include data change counter feature.
+... Use the other version of the suite (singlepeer_prefixcount.robot) to test them.
+
+Library SSHLibrary timeout=10s
+Library RequestsLibrary
+Resource ../../../libraries/BGPSpeaker.robot
+Resource ../../../libraries/ChangeCounter.robot
+Resource ../../../libraries/FailFast.robot
+Resource ../../../libraries/KillPythonTool.robot
+Resource ../../../libraries/PrefixCounting.robot
+Resource ../../../libraries/SetupUtils.robot
+Resource ../../../libraries/SSHKeywords.robot
+Resource ../../../libraries/TemplatedRequests.robot
+Resource ../../../libraries/Utils.robot
+Resource ../../../variables/Variables.robot
+
+Suite Setup Setup_Everything
+Suite Teardown Teardown_Everything
+Test Setup SetupUtils.Setup_Test_With_Logging_And_Fast_Failing
+Test Teardown SetupUtils.Teardown_Test_Show_Bugs_And_Start_Fast_Failing_If_Test_Failed
+
*** Variables ***
-${BGP_TOOL_LOG_LEVEL} info
-${BGP_VARIABLES_FOLDER} ${CURDIR}/../../../variables/bgpuser/
-${CHECK_PERIOD} 1
-${CHECK_PERIOD_CHANGE_COUNT} ${CHECK_PERIOD}
-${CHECK_PERIOD_CHANGE_COUNT_SINGLE} ${CHECK_PERIOD_CHANGE_COUNT}
-${COUNT} 1000000
-${COUNT_CHANGE_COUNT} ${COUNT}
-${COUNT_CHANGE_COUNT_SINGLE} ${COUNT_CHANGE_COUNT}
-${HOLDTIME} 180
-${HOLDTIME_CHANGE_COUNT} ${HOLDTIME}
-${HOLDTIME_CHANGE_COUNT_SINGLE} ${HOLDTIME_CHANGE_COUNT}
-${INSERT} 1
-${KARAF_LOG_LEVEL} INFO
-${KARAF_BGPCEP_LOG_LEVEL} ${KARAF_LOG_LEVEL}
-${KARAF_PROTOCOL_LOG_LEVEL} ${KARAF_BGPCEP_LOG_LEVEL}
-${PREFILL} 0
-${REPETITIONS} 1
-${REPETITIONS_CHANGE_COUNT} ${REPETITIONS}
-${REPETITIONS_CHANGE_COUNT_SINGLE} ${REPETITIONS_CHANGE_COUNT}
-${RESULTS_FILE_NAME} bgp.csv
-${TEST_DURATION_MULTIPLIER} 1
-${TEST_DURATION_MULTIPLIER_CHANGE_COUNT} ${TEST_DURATION_MULTIPLIER}
-${TEST_DURATION_MULTIPLIER_CHANGE_COUNT_SINGLE} ${TEST_DURATION_MULTIPLIER_CHANGE_COUNT}
-${UPDATE} single
-${WITHDRAW} 0
+${BGP_TOOL_LOG_LEVEL} info
+${BGP_VARIABLES_FOLDER} ${CURDIR}/../../../variables/bgpuser/
+${CHECK_PERIOD} 60
+${CHECK_PERIOD_CHANGE_COUNT} ${CHECK_PERIOD}
+${CHECK_PERIOD_CHANGE_COUNT_SINGLE} ${CHECK_PERIOD_CHANGE_COUNT}
+${COUNT} 600000
+${COUNT_CHANGE_COUNT} ${COUNT}
+${COUNT_CHANGE_COUNT_SINGLE} ${COUNT_CHANGE_COUNT}
+${HOLDTIME} 180
+${HOLDTIME_CHANGE_COUNT} ${HOLDTIME}
+${HOLDTIME_CHANGE_COUNT_SINGLE} ${HOLDTIME_CHANGE_COUNT}
+${INSERT} 1
+${PREFILL} 0
+${REPETITIONS} 1
+${REPETITIONS_CHANGE_COUNT} ${REPETITIONS}
+${REPETITIONS_CHANGE_COUNT_SINGLE} ${REPETITIONS_CHANGE_COUNT}
+${RESULTS_FILE_NAME} bgp.csv
+${TEST_DURATION_MULTIPLIER} 1
+${TEST_DURATION_MULTIPLIER_CHANGE_COUNT} ${TEST_DURATION_MULTIPLIER}
+${TEST_DURATION_MULTIPLIER_CHANGE_COUNT_SINGLE} ${TEST_DURATION_MULTIPLIER_CHANGE_COUNT}
+${UPDATE} single
+${WITHDRAW} 0
+${RIB_INSTANCE} example-bgp-rib
+${PROTOCOL_OPENCONFIG} ${RIB_INSTANCE}
+${DEVICE_NAME} controller-config
+${BGP_PEER_NAME} example-bgp-peer
# TODO: Option names can be better.
-${last_change_count_single} -1
+${last_change_count_single} 1
+
*** Test Cases ***
Check_For_Empty_Ipv4_Topology_Before_Talking
Reconfigure_ODL_To_Accept_Connection
[Documentation] Configure BGP peer module with initiate-connection set to false.
- ${template_as_string} = BuiltIn.Set_Variable {'NAME': 'example-bgp-peer', 'IP': '${TOOLS_SYSTEM_IP}', 'HOLDTIME': '${HOLDTIME_CHANGE_COUNT_SINGLE}', 'PEER_PORT': '${BGP_TOOL_PORT}', 'INITIATE': 'false'}
- ConfigViaRestconf.Put_Xml_Template_Folder_Config_Via_Restconf ${BGP_VARIABLES_FOLDER}${/}bgp_peer ${template_as_string}
-
-Wait_For_Data_Change_Counter_Ready
- [Documentation] Data change counter might have been slower to start than ipv4 topology, wait for it.
- BuiltIn.Wait_Until_Keyword_Succeeds 180s 1s ChangeCounter.Get_Change_Count
+ &{mapping} Create Dictionary
+ ... DEVICE_NAME=${DEVICE_NAME}
+ ... BGP_NAME=${BGP_PEER_NAME}
+ ... IP=${TOOLS_SYSTEM_IP}
+ ... HOLDTIME=${HOLDTIME_CHANGE_COUNT_SINGLE}
+ ... PEER_PORT=${BGP_TOOL_PORT}
+ ... INITIATE=false
+ ... BGP_RIB=${RIB_INSTANCE}
+ ... PASSIVE_MODE=true
+ ... BGP_RIB_OPENCONFIG=${PROTOCOL_OPENCONFIG}
+ ... RIB_INSTANCE_NAME=${RIB_INSTANCE}
+ TemplatedRequests.Put_As_Xml_Templated ${BGP_VARIABLES_FOLDER}${/}bgp_peer mapping=${mapping}
Reconfigure_Data_Change_Counter
[Documentation] Configure data change counter to count transactions in example-ipv4-topology instead of example-linkstate-topology.
ChangeCounter.Reconfigure_Topology_Name example-ipv4-topology
-Change_Karaf_Logging_Levels
- [Documentation] We may want to set more verbose logging here after configuration is done.
- KarafKeywords.Set_Bgpcep_Log_Levels bgpcep_level=${KARAF_BGPCEP_LOG_LEVEL} protocol_level=${KARAF_PROTOCOL_LOG_LEVEL}
+Verify_Data_Change_Counter_Ready
+ [Documentation] Data change counter might have been slower to start than ipv4 topology, wait for it.
+ BuiltIn.Wait_Until_Keyword_Succeeds 5x 1s ChangeCounter.Get_Change_Count
Start_Talking_BGP_Speaker
[Documentation] Start Python speaker to connect to ODL.
Store_Change_Count
# Myport value is needed for checking whether connection at precise port was established.
- BGPSpeaker.Start_BGP_Speaker --amount ${COUNT_CHANGE_COUNT_SINGLE} --myip=${TOOLS_SYSTEM_IP} --myport=${BGP_TOOL_PORT} --peerip=${ODL_SYSTEM_IP} --peerport=${ODL_BGP_PORT} --insert=${INSERT} --withdraw=${WITHDRAW} --prefill ${PREFILL} --update ${UPDATE} --${BGP_TOOL_LOG_LEVEL} --results ${RESULTS_FILE_NAME}
+ BGPSpeaker.Start_BGP_Speaker
+ ... --amount ${COUNT_CHANGE_COUNT_SINGLE} --myip=${TOOLS_SYSTEM_IP} --myport=${BGP_TOOL_PORT} --peerip=${ODL_SYSTEM_IP} --peerport=${ODL_BGP_PORT} --insert=${INSERT} --withdraw=${WITHDRAW} --prefill ${PREFILL} --update ${UPDATE} --${BGP_TOOL_LOG_LEVEL} --results ${RESULTS_FILE_NAME}
Wait_For_Stable_Talking_Ipv4_Topology
[Documentation] Wait until example-ipv4-topology becomes stable. This is done by checking the change counter.
- ChangeCounter.Wait_For_Change_Count_To_Become_Stable timeout=${bgp_filling_timeout} period=${CHECK_PERIOD_CHANGE_COUNT_SINGLE} repetitions=${REPETITIONS_CHANGE_COUNT_SINGLE} count_to_overcome=${last_change_count_single}
+ ChangeCounter.Wait_For_Change_Count_To_Become_Stable
+ ... timeout=${bgp_filling_timeout}
+ ... period=${CHECK_PERIOD_CHANGE_COUNT_SINGLE}
+ ... repetitions=${REPETITIONS_CHANGE_COUNT_SINGLE}
+ ... count_to_overcome=${last_change_count_single}
Check_Talking_Ipv4_Topology_Count
[Documentation] Count the routes in example-ipv4-topology and fail if the count is not correct.
Wait_For_Stable_Ipv4_Topology_After_Talking
[Documentation] Wait until example-ipv4-topology becomes stable again.
[Tags] critical
- ChangeCounter.Wait_For_Change_Count_To_Become_Stable timeout=${bgp_emptying_timeout} period=${CHECK_PERIOD_CHANGE_COUNT_SINGLE} repetitions=${REPETITIONS_CHANGE_COUNT_SINGLE} count_to_overcome=${last_change_count_single}
+ ChangeCounter.Wait_For_Change_Count_To_Become_Stable
+ ... timeout=${bgp_emptying_timeout}
+ ... period=${CHECK_PERIOD_CHANGE_COUNT_SINGLE}
+ ... repetitions=${REPETITIONS_CHANGE_COUNT_SINGLE}
+ ... count_to_overcome=${last_change_count_single}
Check_For_Empty_Ipv4_Topology_After_Talking
[Documentation] Example-ipv4-topology should be empty now.
Start_Listening_BGP_Speaker
[Documentation] Start Python speaker in listening mode.
- BGPSpeaker.Start_BGP_Speaker --amount ${COUNT_CHANGE_COUNT_SINGLE} --listen --myip=${TOOLS_SYSTEM_IP} --myport=${BGP_TOOL_PORT} --peerip=${ODL_SYSTEM_IP} --insert=${INSERT} --withdraw=${WITHDRAW} --prefill ${PREFILL} --update ${UPDATE} --${BGP_TOOL_LOG_LEVEL} --results ${RESULTS_FILE_NAME}
+ BGPSpeaker.Start_BGP_Speaker
+ ... --amount ${COUNT_CHANGE_COUNT_SINGLE} --listen --myip=${TOOLS_SYSTEM_IP} --myport=${BGP_TOOL_PORT} --peerip=${ODL_SYSTEM_IP} --insert=${INSERT} --withdraw=${WITHDRAW} --prefill ${PREFILL} --update ${UPDATE} --${BGP_TOOL_LOG_LEVEL} --results ${RESULTS_FILE_NAME}
Reconfigure_ODL_To_Initiate_Connection
[Documentation] Replace BGP peer config module, now with initiate-connection set to true.
Store_Change_Count
- ${template_as_string} = BuiltIn.Set_Variable {'NAME': 'example-bgp-peer', 'IP': '${TOOLS_SYSTEM_IP}', 'HOLDTIME': '${HOLDTIME_CHANGE_COUNT_SINGLE}', 'PEER_PORT': '${BGP_TOOL_PORT}', 'INITIATE': 'true'}
- ConfigViaRestconf.Put_Xml_Template_Folder_Config_Via_Restconf ${BGP_VARIABLES_FOLDER}${/}bgp_peer ${template_as_string}
+ &{mapping} Create Dictionary
+ ... DEVICE_NAME=${DEVICE_NAME}
+ ... BGP_NAME=${BGP_PEER_NAME}
+ ... IP=${TOOLS_SYSTEM_IP}
+ ... HOLDTIME=${HOLDTIME_CHANGE_COUNT_SINGLE}
+ ... PEER_PORT=${BGP_TOOL_PORT}
+ ... INITIATE=true
+ ... BGP_RIB=${RIB_INSTANCE}
+ ... PASSIVE_MODE=false
+ ... BGP_RIB_OPENCONFIG=${PROTOCOL_OPENCONFIG}
+ ... RIB_INSTANCE_NAME=${RIB_INSTANCE}
+ TemplatedRequests.Put_As_Xml_Templated ${BGP_VARIABLES_FOLDER}${/}bgp_peer mapping=${mapping}
Wait_For_Stable_Listening_Ipv4_Topology
[Documentation] Wait until example-ipv4-topology becomes stable.
- ChangeCounter.Wait_For_Change_Count_To_Become_Stable timeout=${bgp_filling_timeout} period=${CHECK_PERIOD_CHANGE_COUNT_SINGLE} repetitions=${REPETITIONS_CHANGE_COUNT_SINGLE} count_to_overcome=${last_change_count_single}
+ ChangeCounter.Wait_For_Change_Count_To_Become_Stable
+ ... timeout=${bgp_filling_timeout}
+ ... period=${CHECK_PERIOD_CHANGE_COUNT_SINGLE}
+ ... repetitions=${REPETITIONS_CHANGE_COUNT_SINGLE}
+ ... count_to_overcome=${last_change_count_single}
Check_Listening_Ipv4_Topology_Count
[Documentation] Count the routes in example-ipv4-topology and fail if the count is not correct.
Store_File_To_Workspace totals-${RESULTS_FILE_NAME} totals-${RESULTS_FILE_NAME}
Store_File_To_Workspace performance-${RESULTS_FILE_NAME} performance-${RESULTS_FILE_NAME}
Store_File_To_Workspace totals-${RESULTS_FILE_NAME} changecount-listening-totals-${RESULTS_FILE_NAME}
- Store_File_To_Workspace performance-${RESULTS_FILE_NAME} changecount-listening-performance-${RESULTS_FILE_NAME}
+ Store_File_To_Workspace
+ ... performance-${RESULTS_FILE_NAME}
+ ... changecount-listening-performance-${RESULTS_FILE_NAME}
Wait_For_Stable_Ipv4_Topology_After_Listening
[Documentation] Wait until example-ipv4-topology becomes stable again.
[Tags] critical
- ChangeCounter.Wait_For_Change_Count_To_Become_Stable timeout=${bgp_emptying_timeout} period=${CHECK_PERIOD_CHANGE_COUNT_SINGLE} repetitions=${REPETITIONS_CHANGE_COUNT_SINGLE} count_to_overcome=${last_change_count_single}
+ ChangeCounter.Wait_For_Change_Count_To_Become_Stable
+ ... timeout=${bgp_emptying_timeout}
+ ... period=${CHECK_PERIOD_CHANGE_COUNT_SINGLE}
+ ... repetitions=${REPETITIONS_CHANGE_COUNT_SINGLE}
+ ... count_to_overcome=${last_change_count_single}
Check_For_Empty_Ipv4_Topology_After_Listening
[Documentation] Example-ipv4-topology should be empty now.
[Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
PrefixCounting.Check_Ipv4_Topology_Is_Empty
-Restore_Karaf_Logging_Levels
- [Documentation] Set logging on bgpcep and protocol to the global value.
- KarafKeywords.Set_Bgpcep_Log_Levels bgpcep_level=${KARAF_LOG_LEVEL} protocol_level=${KARAF_LOG_LEVEL}
-
Restore_Data_Change_Counter_Configuration
[Documentation] Configure data change counter back to count transactions affecting example-linkstate-topology.
[Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
Delete_Bgp_Peer_Configuration
[Documentation] Revert the BGP configuration to the original state: without any configured peers.
[Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
- ${template_as_string} = BuiltIn.Set_Variable {'NAME': 'example-bgp-peer'}
- ConfigViaRestconf.Delete_Xml_Template_Folder_Config_Via_Restconf ${BGP_VARIABLES_FOLDER}${/}bgp_peer ${template_as_string}
+ &{mapping} BuiltIn.Create_Dictionary
+ ... DEVICE_NAME=${DEVICE_NAME}
+ ... BGP_NAME=${BGP_PEER_NAME}
+ ... IP=${TOOLS_SYSTEM_IP}
+ ... BGP_RIB_OPENCONFIG=${PROTOCOL_OPENCONFIG}
+ TemplatedRequests.Delete_Templated ${BGP_VARIABLES_FOLDER}${/}bgp_peer mapping=${mapping}
+
*** Keywords ***
Setup_Everything
[Documentation] Setup imported resources, SSH-login to tools system,
... create HTTP session, put Python tool to tools system.
SetupUtils.Setup_Utils_For_Setup_And_Teardown
- ConfigViaRestconf.Setup_Config_Via_Restconf
+ TemplatedRequests.Create_Default_Session
ChangeCounter.CC_Setup
PrefixCounting.PC_Setup
- RequestsLibrary.Create_Session operational http://${ODL_SYSTEM_IP}:${RESTCONFPORT}${OPERATIONAL_API} auth=${AUTH}
+ RequestsLibrary.Create_Session
+ ... operational
+ ... http://${ODL_SYSTEM_IP}:${RESTCONFPORT}
+ ... auth=${AUTH}
+ ... timeout=125
+ ... max_retries=0
# TODO: Do not include slash in ${OPERATIONAL_TOPO_API}, having it typed here is more readable.
# TODO: Alternatively, create variable in Variables which starts with http.
# Both TODOs would probably need to update every suite relying on current Variables.
SSHLibrary.Set_Default_Configuration prompt=${TOOLS_SYSTEM_PROMPT}
SSHLibrary.Open_Connection ${TOOLS_SYSTEM_IP}
- Utils.Flexible_Mininet_Login
+ SSHKeywords.Flexible_Mininet_Login
SSHKeywords.Require_Python
SSHKeywords.Assure_Library_Ipaddr target_dir=.
SSHLibrary.Put_File ${CURDIR}/../../../../tools/fastbgp/play.py
# Calculate the timeout value based on how many routes are going to be pushed
# TODO: Unify formulas with other suites in this directory.
- ${timeout} = BuiltIn.Evaluate ${TEST_DURATION_MULTIPLIER_CHANGE_COUNT_SINGLE} * (${COUNT_CHANGE_COUNT_SINGLE} * 9.0 / 10000 + 20)
+ ${timeout} BuiltIn.Evaluate
+ ... ${TEST_DURATION_MULTIPLIER_CHANGE_COUNT_SINGLE} * (${COUNT_CHANGE_COUNT_SINGLE} * 9.0 / 10000 + 20)
Builtin.Set_Suite_Variable ${bgp_filling_timeout} ${timeout}
Builtin.Set_Suite_Variable ${bgp_emptying_timeout} ${bgp_filling_timeout*3.0/4}
- KarafKeywords.Execute_Controller_Karaf_Command_On_Background log:set ${KARAF_LOG_LEVEL}
Teardown_Everything
[Documentation] Make sure Python tool was killed and tear down imported Resources.
# Environment issue may have dropped the SSH connection, but we do not want Teardown to fail.
BuiltIn.Run_Keyword_And_Ignore_Error KillPythonTool.Search_And_Kill_Remote_Python 'play\.py'
- ConfigViaRestconf.Teardown_Config_Via_Restconf
+ BuiltIn.Run_Keyword_And_Ignore_Error Utils.Get_Sysstat_Statistics
RequestsLibrary.Delete_All_Sessions
SSHLibrary.Close_All_Connections
Store_Change_Count
[Documentation] Get the count of changes from BGP change counter. Ignore error or store the value.
- ${status} ${count} = BuiltIn.Run_Keyword_And_Ignore_Error ChangeCounter.Get_Change_Count
- BuiltIn.Run_Keyword_If '${status}' == 'PASS' BuiltIn.Set_Suite_Variable ${last_change_count_single} ${count}
+ ${status} ${count} BuiltIn.Run_Keyword_And_Ignore_Error ChangeCounter.Get_Change_Count
+ IF '${status}' == 'PASS'
+ BuiltIn.Set_Suite_Variable ${last_change_count_single} ${count}
+ END
Store_File_To_Workspace
- [Arguments] ${src_file_name} ${dst_file_name}
[Documentation] Store the provided file from the SSH client to workspace.
- ${files}= SSHLibrary.List Files In Directory .
- ${output_log}= SSHLibrary.Execute_Command cat ${src_file_name}
+ [Arguments] ${src_file_name} ${dst_file_name}
+ ${files} SSHLibrary.List Files In Directory .
+ ${output_log} SSHLibrary.Execute_Command cat ${src_file_name}
BuiltIn.Log ${output_log}
Create File ${dst_file_name} ${output_log}
Code Review / integration / test.git / blobdiff