*** Settings ***
-Documentation Basic tests for odl-bgpcep-bgp-all feature.
-...
-... Copyright (c) 2015 Cisco Systems, Inc. and others. All rights reserved.
-...
-... This program and the accompanying materials are made available under the
-... terms of the Eclipse Public License v1.0 which accompanies this distribution,
-... and is available at http://www.eclipse.org/legal/epl-v10.html
-...
-... Test suite performs basic BGP functional test cases:
-... BGP peer initiated connection
-... - introduce and check 3 prefixes in one update message
-... ODL controller initiated connection:
-... - introduce and check 3 prefixes in one update message
-... - introduce 2 prefixes in first update message and then additional 2 prefixes
-... in another update while the very first prefix is withdrawn
-... - introduce 3 prefixes and try to withdraw the first one
-... (to be ignored by controller) in a single update message
-...
-... For versions Oxygen and above, there are TC_R (test case reset) which
-... test session-reset functionality.
-... Resets the session, and than verifies that example-ipv4-topology is empty again.
-...
-... For versions Fluorine and above, there are test cases:
-... TC_LA (test case local address)
-... test configuration of internal peer with local-address configured
-... - configure peer with local-address and connect bgp-speaker to it
-... with tools_system_ip
-... - check filled topology
-...
-... TC_PG (test case peer group) which
-... tests configuration and reconfiguration of peer-groups and neighbors configured by them.
-... - configure peer-group, and assign neighbor to this peer-group
-... - check filled topology
-... - reconfigure peer-group without ipv4 unicast afi-safi
-... - check empty topology
-... - reconfigre neighbor without peer-group, delete peer-group
-...
-... Brief description how to perform BGP functional test:
-... https://wiki.opendaylight.org/view/BGP_LS_PCEP:Lithium_Feature_Tests#How_to_test_2
-Suite Setup Setup_Everything
-Suite Teardown Teardown_Everything
-Test Setup SetupUtils.Setup_Test_With_Logging_And_Fast_Failing
-Test Teardown FailFast.Start_Failing_Fast_If_This_Failed
-Library OperatingSystem
-Library SSHLibrary timeout=10s
-Library RequestsLibrary
-Resource ../../../libraries/BGPcliKeywords.robot
-Resource ../../../libraries/BGPSpeaker.robot
-Resource ../../../libraries/CompareStream.robot
-Resource ../../../libraries/FailFast.robot
-Resource ../../../libraries/KarafKeywords.robot
-Resource ../../../libraries/KillPythonTool.robot
-Resource ../../../libraries/SetupUtils.robot
-Resource ../../../libraries/SSHKeywords.robot
-Resource ../../../libraries/TemplatedRequests.robot
-Resource ../../../variables/Variables.robot
-Resource ../../../libraries/WaitForFailure.robot
+Documentation Basic tests for odl-bgpcep-bgp-all feature.
+...
+... Copyright (c) 2015 Cisco Systems, Inc. and others. All rights reserved.
+...
+... This program and the accompanying materials are made available under the
+... terms of the Eclipse Public License v1.0 which accompanies this distribution,
+... and is available at http://www.eclipse.org/legal/epl-v10.html
+...
+... Test suite performs basic BGP functional test cases:
+... BGP peer initiated connection
+... - introduce and check 3 prefixes in one update message
+... ODL controller initiated connection:
+... - introduce and check 3 prefixes in one update message
+... - introduce 2 prefixes in first update message and then additional 2 prefixes
+... in another update while the very first prefix is withdrawn
+... - introduce 3 prefixes and try to withdraw the first one
+... (to be ignored by controller) in a single update message
+...
+... TC_R (test case reset) tests session-reset functionality.
+... Resets the session, and than verifies that example-ipv4-topology is empty again.
+...
+... TC_LA (test case local address) tests configuration of internal peer
+... with local-address configured
+... - configure peer with local-address and connect bgp-speaker to it
+... with tools_system_ip
+... - check filled topology
+...
+... TC_PG (test case peer group) tests configuration and reconfiguration
+... of peer-groups and neighbors configured by them.
+... - configure peer-group, and assign neighbor to this peer-group
+... - check filled topology
+... - reconfigure peer-group without ipv4 unicast afi-safi
+... - check empty topology
+... - reconfigre neighbor without peer-group, delete peer-group
+...
+... Brief description how to perform BGP functional test:
+... https://wiki.opendaylight.org/view/BGP_LS_PCEP:Lithium_Feature_Tests#How_to_test_2
+
+Library OperatingSystem
+Library SSHLibrary timeout=10s
+Library RequestsLibrary
+Resource ../../../libraries/BGPcliKeywords.robot
+Resource ../../../libraries/BGPSpeaker.robot
+Resource ../../../libraries/CompareStream.robot
+Resource ../../../libraries/FailFast.robot
+Resource ../../../libraries/KarafKeywords.robot
+Resource ../../../libraries/KillPythonTool.robot
+Resource ../../../libraries/SetupUtils.robot
+Resource ../../../libraries/SSHKeywords.robot
+Resource ../../../libraries/TemplatedRequests.robot
+Resource ../../../variables/Variables.robot
+Resource ../../../libraries/WaitForFailure.robot
+
+Suite Setup Setup_Everything
+Suite Teardown Teardown_Everything
+Test Setup SetupUtils.Setup_Test_With_Logging_And_Fast_Failing
+Test Teardown FailFast.Start_Failing_Fast_If_This_Failed
+
*** Variables ***
-${BGP_PEER_NAME} example-bgp-peer
-${BGP_TOOL_LOG_LEVEL} info
-${BGP_VARIABLES_FOLDER} ${CURDIR}/../../../variables/bgpuser/
-${CONFIG_SESSION} session
-${DEVICE_NAME} controller-config
-${HOLDTIME} 180
-${ODL_BGP_LOG_LEVEL} DEFAULT
-${ODL_LOG_LEVEL} INFO
-${PEER_GROUP} internal-neighbors
-${RIB_NAME} example-bgp-rib
-${TOOLS_SYSTEM_PROMPT} ${DEFAULT_LINUX_PROMPT}
+${BGP_PEER_NAME} example-bgp-peer
+${BGP_TOOL_LOG_LEVEL} info
+${BGP_VARIABLES_FOLDER} ${CURDIR}/../../../variables/bgpuser/
+${CONFIG_SESSION} session
+${DEVICE_NAME} controller-config
+${HOLDTIME} 180
+${ODL_BGP_LOG_LEVEL} DEFAULT
+${ODL_LOG_LEVEL} INFO
+${PEER_GROUP} internal-neighbors
+${RIB_NAME} example-bgp-rib
+${TOOLS_SYSTEM_PROMPT} ${DEFAULT_LINUX_PROMPT}
+
*** Test Cases ***
Check_For_Empty_Topology_Before_Talking
TC_LA_Reconfigure_Odl_To_Initiate_Connection
[Documentation] Configure ibgp peer with local-address.
- CompareStream.Run_Keyword_If_Less_Than_Fluorine BuiltIn.Pass_Execution Test case valid only for versions fluorine and above.
- &{mapping} Create Dictionary IP=${TOOLS_SYSTEM_IP} HOLDTIME=${HOLDTIME} PEER_PORT=${BGP_TOOL_PORT} PASSIVE_MODE=false BGP_RIB_OPENCONFIG=${RIB_NAME}
+ &{mapping} Create Dictionary
+ ... IP=${TOOLS_SYSTEM_IP}
+ ... HOLDTIME=${HOLDTIME}
+ ... PEER_PORT=${BGP_TOOL_PORT}
+ ... PASSIVE_MODE=false
+ ... BGP_RIB_OPENCONFIG=${RIB_NAME}
... LOCAL=${ODL_SYSTEM_IP}
- TemplatedRequests.Put_As_Xml_Templated ${BGP_VARIABLES_FOLDER}${/}ibgp_local_address mapping=${mapping} session=${CONFIG_SESSION}
+ TemplatedRequests.Put_As_Xml_Templated
+ ... ${BGP_VARIABLES_FOLDER}${/}ibgp_local_address
+ ... mapping=${mapping}
+ ... session=${CONFIG_SESSION}
[Teardown] SetupUtils.Teardown_Test_Show_Bugs_If_Test_Failed
TC_LA_Start_Bgp_Speaker_And_Verify_Connected
[Documentation] Verify that peer is present in odl's rib under local-address ip.
[Tags] critical
- CompareStream.Run_Keyword_If_Less_Than_Fluorine BuiltIn.Pass_Execution Test case valid only for versions fluorine and above.
- ${speaker_args} BuiltIn.Set_Variable --amount 3 --listen --myip=${TOOLS_SYSTEM_IP} --myport=${BGP_TOOL_PORT} --peerip=${ODL_SYSTEM_IP} --debug
- ${output} BGPSpeaker.Start_BGP_Speaker_And_Verify_Connected ${speaker_args} session=${CONFIG_SESSION} speaker_ip=${TOOLS_SYSTEM_IP}
+ ${speaker_args} BuiltIn.Set_Variable
+ ... --amount 3 --listen --myip=${TOOLS_SYSTEM_IP} --myport=${BGP_TOOL_PORT} --peerip=${ODL_SYSTEM_IP} --debug
+ ${output} BGPSpeaker.Start_BGP_Speaker_And_Verify_Connected
+ ... ${speaker_args}
+ ... session=${CONFIG_SESSION}
+ ... speaker_ip=${TOOLS_SYSTEM_IP}
BuiltIn.Log ${output}
TC_LA_Kill_Bgp_Speaker
[Documentation] Abort the Python speaker. Also, attempt to stop failing fast.
[Tags] critical
[Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
- CompareStream.Run_Keyword_If_Less_Than_Fluorine BuiltIn.Pass_Execution Test case valid only for versions fluorine and above.
BGPSpeaker.Kill_BGP_Speaker
FailFast.Do_Not_Fail_Fast_From_Now_On
# NOTE: It is still possible to remain failing fast, if both previous and this test have failed.
TC_LA_Delete_Bgp_Peer_Configuration
[Documentation] Delete peer configuration.
- CompareStream.Run_Keyword_If_Less_Than_Fluorine BuiltIn.Pass_Execution Test case valid only for versions fluorine and above.
&{mapping} Create Dictionary IP=${TOOLS_SYSTEM_IP} BGP_RIB_OPENCONFIG=${RIB_NAME}
- TemplatedRequests.Delete_Templated ${BGP_VARIABLES_FOLDER}${/}ibgp_local_address mapping=${mapping} session=${CONFIG_SESSION}
+ TemplatedRequests.Delete_Templated
+ ... ${BGP_VARIABLES_FOLDER}${/}ibgp_local_address
+ ... mapping=${mapping}
+ ... session=${CONFIG_SESSION}
Reconfigure_ODL_To_Accept_Connection
[Documentation] Configure BGP peer module with initiate-connection set to false.
- &{mapping} Create Dictionary DEVICE_NAME=${DEVICE_NAME} BGP_NAME=${BGP_PEER_NAME} IP=${TOOLS_SYSTEM_IP} HOLDTIME=${HOLDTIME} PEER_PORT=${BGP_TOOL_PORT}
- ... INITIATE=false BGP_RIB=${RIB_NAME} PASSIVE_MODE=true BGP_RIB_OPENCONFIG=${RIB_NAME}
- TemplatedRequests.Put_As_Xml_Templated ${BGP_VARIABLES_FOLDER}${/}bgp_peer mapping=${mapping} session=${CONFIG_SESSION}
+ &{mapping} Create Dictionary
+ ... DEVICE_NAME=${DEVICE_NAME}
+ ... BGP_NAME=${BGP_PEER_NAME}
+ ... IP=${TOOLS_SYSTEM_IP}
+ ... HOLDTIME=${HOLDTIME}
+ ... PEER_PORT=${BGP_TOOL_PORT}
+ ... INITIATE=false
+ ... BGP_RIB=${RIB_NAME}
+ ... PASSIVE_MODE=true
+ ... BGP_RIB_OPENCONFIG=${RIB_NAME}
+ TemplatedRequests.Put_As_Xml_Templated
+ ... ${BGP_VARIABLES_FOLDER}${/}bgp_peer
+ ... mapping=${mapping}
+ ... session=${CONFIG_SESSION}
[Teardown] SetupUtils.Teardown_Test_Show_Bugs_If_Test_Failed
Start_Talking_BGP_speaker
[Documentation] Start Python speaker to connect to ODL, verify that the tool does not promptly exit.
# Myport value is needed for checking whether connection at precise port was established.
- BGPSpeaker.Start_BGP_Speaker --amount 3 --myip=${TOOLS_SYSTEM_IP} --myport=${BGP_TOOL_PORT} --peerip=${ODL_SYSTEM_IP} --peerport=${ODL_BGP_PORT} --${BGP_TOOL_LOG_LEVEL}
+ BGPSpeaker.Start_BGP_Speaker
+ ... --amount 3 --myip=${TOOLS_SYSTEM_IP} --myport=${BGP_TOOL_PORT} --peerip=${ODL_SYSTEM_IP} --peerport=${ODL_BGP_PORT} --${BGP_TOOL_LOG_LEVEL}
Read_And_Fail_If_Prompt_Is_Seen
Check_Talking_Connection_Is_Established
TC_R_Reset_Bgp_Peer_Session
[Documentation] Reset Peer Session
- [Tags] Critical
- CompareStream.Run_Keyword_If_Less_Than_Oxygen BuiltIn.Pass_Execution Test case valid only for versions oxygen and above.
+ [Tags] critical
&{mapping} Create Dictionary IP=${TOOLS_SYSTEM_IP} RIB_INSTANCE_NAME=${RIB_NAME}
- TemplatedRequests.Post_As_Xml_Templated folder=${BGP_VARIABLES_FOLDER}${/}peer_session/restart mapping=${mapping} session=${CONFIG_SESSION}
+ TemplatedRequests.Post_As_Xml_Templated
+ ... folder=${BGP_VARIABLES_FOLDER}${/}peer_session/restart
+ ... mapping=${mapping}
+ ... session=${CONFIG_SESSION}
TC_R_Check_For_Empty_Topology_After_Resetting
[Documentation] See example-ipv4-topology empty after resetting session
[Tags] critical
- CompareStream.Run_Keyword_If_Less_Than_Oxygen BuiltIn.Pass_Execution Test case valid only for versions oxygen and above.
Wait_For_Topology_To_Change_To empty_topology
TC_PG_Reconfigure_ODL_With_Peer_Group_To_Accept_Connection
[Documentation] Configure BGP peer module with initiate-connection set to false.
- CompareStream.Run_Keyword_If_Less_Than_Fluorine BuiltIn.Pass_Execution Test case valid only for versions fluorine and above.
- &{mapping} BuiltIn.Create_Dictionary DEVICE_NAME=${DEVICE_NAME} BGP_NAME=${BGP_PEER_NAME} IP=${TOOLS_SYSTEM_IP} BGP_RIB_OPENCONFIG=${RIB_NAME}
- TemplatedRequests.Delete_Templated ${BGP_VARIABLES_FOLDER}${/}bgp_peer mapping=${mapping} session=${CONFIG_SESSION}
+ &{mapping} BuiltIn.Create_Dictionary
+ ... DEVICE_NAME=${DEVICE_NAME}
+ ... BGP_NAME=${BGP_PEER_NAME}
+ ... IP=${TOOLS_SYSTEM_IP}
+ ... BGP_RIB_OPENCONFIG=${RIB_NAME}
+ TemplatedRequests.Delete_Templated
+ ... ${BGP_VARIABLES_FOLDER}${/}bgp_peer
+ ... mapping=${mapping}
+ ... session=${CONFIG_SESSION}
Configure_Peer_Group
- &{mapping} Create Dictionary DEVICE_NAME=${DEVICE_NAME} BGP_NAME=${BGP_PEER_NAME} IP=${TOOLS_SYSTEM_IP} HOLDTIME=${HOLDTIME} PEER_PORT=${BGP_TOOL_PORT}
- ... PEER_GROUP_NAME=${PEER_GROUP} INITIATE=false BGP_RIB=${RIB_NAME} PASSIVE_MODE=true BGP_RIB_OPENCONFIG=${RIB_NAME}
- TemplatedRequests.Put_As_Xml_Templated ${BGP_VARIABLES_FOLDER}${/}bgp_peer_group mapping=${mapping} session=${CONFIG_SESSION}
+ &{mapping} Create Dictionary
+ ... DEVICE_NAME=${DEVICE_NAME}
+ ... BGP_NAME=${BGP_PEER_NAME}
+ ... IP=${TOOLS_SYSTEM_IP}
+ ... HOLDTIME=${HOLDTIME}
+ ... PEER_PORT=${BGP_TOOL_PORT}
+ ... PEER_GROUP_NAME=${PEER_GROUP}
+ ... INITIATE=false
+ ... BGP_RIB=${RIB_NAME}
+ ... PASSIVE_MODE=true
+ ... BGP_RIB_OPENCONFIG=${RIB_NAME}
+ TemplatedRequests.Put_As_Xml_Templated
+ ... ${BGP_VARIABLES_FOLDER}${/}bgp_peer_group
+ ... mapping=${mapping}
+ ... session=${CONFIG_SESSION}
[Teardown] SetupUtils.Teardown_Test_Show_Bugs_If_Test_Failed
TC_PG_Restart_Talking_BGP_Speaker
[Documentation] Abort the Python speaker. Also, attempt to stop failing fast.
[Tags] critical
[Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
- CompareStream.Run_Keyword_If_Less_Than_Fluorine BuiltIn.Pass_Execution Test case valid only for versions fluorine and above.
Restart_Talking_BGP_Speaker
[Teardown] FailFast.Do_Not_Start_Failing_If_This_Failed
TC_PG_Check_Talking_Topology_Is_Filled
[Documentation] See new routes in example-ipv4-topology as a proof that synchronization was correct.
[Tags] critical
- CompareStream.Run_Keyword_If_Less_Than_Fluorine BuiltIn.Pass_Execution Test case valid only for versions fluorine and above.
Wait_For_Topology_To_Change_To filled_topology
TC_PG_Reconfigure_ODL_With_Peer_Group_Without_Ipv4_Unicast
- [Documentation] Configure BGP peer module with initiate-connection set to false. (Fluorine only)
- CompareStream.Run_Keyword_If_Less_Than_Fluorine BuiltIn.Pass_Execution Test case valid only for versions fluorine and above.
+ [Documentation] Configure BGP peer module with initiate-connection set to false.
Configure_Peer_Group peer_group_folder=peer_group_without_ipv4
[Teardown] SetupUtils.Teardown_Test_Show_Bugs_If_Test_Failed
TC_PG_Check_For_Empty_Topology_After_Deconfiguration
- [Documentation] See example-ipv4-topology empty after resetting session (Fluorine only)
+ [Documentation] See example-ipv4-topology empty after resetting session.
[Tags] critical
- CompareStream.Run_Keyword_If_Less_Than_Fluorine BuiltIn.Pass_Execution Test case valid only for versions fluorine and above.
Wait_For_Topology_To_Change_To empty_topology
TC_PG_Reconfigure_ODL_To_Accept_Connection
- [Documentation] Configure BGP peer module with initiate-connection set to false. (Fluorine only)
- CompareStream.Run_Keyword_If_Less_Than_Fluorine BuiltIn.Pass_Execution Test case valid only for versions fluorine and above.
- &{mapping} Create Dictionary DEVICE_NAME=${DEVICE_NAME} BGP_NAME=${BGP_PEER_NAME} IP=${TOOLS_SYSTEM_IP} HOLDTIME=${HOLDTIME} PEER_PORT=${BGP_TOOL_PORT}
- ... PEER_GROUP_NAME=${PEER_GROUP} INITIATE=false BGP_RIB=${RIB_NAME} PASSIVE_MODE=true BGP_RIB_OPENCONFIG=${RIB_NAME}
- TemplatedRequests.Delete_Templated ${BGP_VARIABLES_FOLDER}${/}bgp_peer_group mapping=${mapping} session=${CONFIG_SESSION}
- TemplatedRequests.Put_As_Xml_Templated ${BGP_VARIABLES_FOLDER}${/}bgp_peer mapping=${mapping} session=${CONFIG_SESSION}
+ [Documentation] Configure BGP peer module with initiate-connection set to false.
+ &{mapping} Create Dictionary
+ ... DEVICE_NAME=${DEVICE_NAME}
+ ... BGP_NAME=${BGP_PEER_NAME}
+ ... IP=${TOOLS_SYSTEM_IP}
+ ... HOLDTIME=${HOLDTIME}
+ ... PEER_PORT=${BGP_TOOL_PORT}
+ ... PEER_GROUP_NAME=${PEER_GROUP}
+ ... INITIATE=false
+ ... BGP_RIB=${RIB_NAME}
+ ... PASSIVE_MODE=true
+ ... BGP_RIB_OPENCONFIG=${RIB_NAME}
+ TemplatedRequests.Delete_Templated
+ ... ${BGP_VARIABLES_FOLDER}${/}bgp_peer_group
+ ... mapping=${mapping}
+ ... session=${CONFIG_SESSION}
+ TemplatedRequests.Put_As_Xml_Templated
+ ... ${BGP_VARIABLES_FOLDER}${/}bgp_peer
+ ... mapping=${mapping}
+ ... session=${CONFIG_SESSION}
Deconfigure_Peer_Group
[Teardown] SetupUtils.Teardown_Test_Show_Bugs_If_Test_Failed
Start_Listening_BGP_Speaker
[Documentation] Start Python speaker in listening mode, verify that the tool does not exit quickly.
- BGPSpeaker.Start_BGP_Speaker --amount 3 --listen --myip=${TOOLS_SYSTEM_IP} --myport=${BGP_TOOL_PORT} --peerip=${ODL_SYSTEM_IP} --${BGP_TOOL_LOG_LEVEL}
+ BGPSpeaker.Start_BGP_Speaker
+ ... --amount 3 --listen --myip=${TOOLS_SYSTEM_IP} --myport=${BGP_TOOL_PORT} --peerip=${ODL_SYSTEM_IP} --${BGP_TOOL_LOG_LEVEL}
Read_And_Fail_If_Prompt_Is_Seen
Check_Listening_Connection_Is_Not_Established_Yet
Reconfigure_ODL_To_Initiate_Connection
[Documentation] Replace BGP peer config module, now with initiate-connection set to true.
- &{mapping} Create Dictionary DEVICE_NAME=${DEVICE_NAME} BGP_NAME=${BGP_PEER_NAME} IP=${TOOLS_SYSTEM_IP} HOLDTIME=${HOLDTIME} PEER_PORT=${BGP_TOOL_PORT}
- ... INITIATE=true BGP_RIB=${RIB_NAME} PASSIVE_MODE=false BGP_RIB_OPENCONFIG=${RIB_NAME}
- TemplatedRequests.Put_As_Xml_Templated ${BGP_VARIABLES_FOLDER}${/}bgp_peer mapping=${mapping} session=${CONFIG_SESSION}
+ &{mapping} Create Dictionary
+ ... DEVICE_NAME=${DEVICE_NAME}
+ ... BGP_NAME=${BGP_PEER_NAME}
+ ... IP=${TOOLS_SYSTEM_IP}
+ ... HOLDTIME=${HOLDTIME}
+ ... PEER_PORT=${BGP_TOOL_PORT}
+ ... INITIATE=true
+ ... BGP_RIB=${RIB_NAME}
+ ... PASSIVE_MODE=false
+ ... BGP_RIB_OPENCONFIG=${RIB_NAME}
+ TemplatedRequests.Put_As_Xml_Templated
+ ... ${BGP_VARIABLES_FOLDER}${/}bgp_peer
+ ... mapping=${mapping}
+ ... session=${CONFIG_SESSION}
Check_Listening_Connection_Is_Established
[Documentation] See TCP (BGP) connection in established state.
Start_Listening_BGP_Speaker_Case_2
[Documentation] BGP Speaker introduces 2 prefixes in the first update & another 2 prefixes while the very first is withdrawn in 2nd update
- BGPSpeaker.Start_BGP_Speaker --amount 3 --listen --myip=${TOOLS_SYSTEM_IP} --myport=${BGP_TOOL_PORT} --peerip=${ODL_SYSTEM_IP} --prefill=2 --insert=2 --withdraw=1 --updates=single --firstprefix=8.0.0.240 --${BGP_TOOL_LOG_LEVEL}
+ BGPSpeaker.Start_BGP_Speaker
+ ... --amount 3 --listen --myip=${TOOLS_SYSTEM_IP} --myport=${BGP_TOOL_PORT} --peerip=${ODL_SYSTEM_IP} --prefill=2 --insert=2 --withdraw=1 --updates=single --firstprefix=8.0.0.240 --${BGP_TOOL_LOG_LEVEL}
Read_And_Fail_If_Prompt_Is_Seen
Check_Listening_Connection_Is_Established_Case_2
Start_Listening_BGP_Speaker_Case_3
[Documentation] BGP Speaker introduces 3 prefixes while the first one occures again in the withdrawn list (to be ignored by controller)
- BGPSpeaker.Start_BGP_Speaker --amount 2 --listen --myip=${TOOLS_SYSTEM_IP} --myport=${BGP_TOOL_PORT} --peerip=${ODL_SYSTEM_IP} --prefill=0 --insert=3 --withdraw=1 --updates=single --${BGP_TOOL_LOG_LEVEL}
+ BGPSpeaker.Start_BGP_Speaker
+ ... --amount 2 --listen --myip=${TOOLS_SYSTEM_IP} --myport=${BGP_TOOL_PORT} --peerip=${ODL_SYSTEM_IP} --prefill=0 --insert=3 --withdraw=1 --updates=single --${BGP_TOOL_LOG_LEVEL}
Read_And_Fail_If_Prompt_Is_Seen
Check_Listening_Connection_Is_Established_Case_3
Delete_Bgp_Peer_Configuration
[Documentation] Revert the BGP configuration to the original state: without any configured peers.
- &{mapping} BuiltIn.Create_Dictionary DEVICE_NAME=${DEVICE_NAME} BGP_NAME=${BGP_PEER_NAME} IP=${TOOLS_SYSTEM_IP} BGP_RIB_OPENCONFIG=${RIB_NAME}
- TemplatedRequests.Delete_Templated ${BGP_VARIABLES_FOLDER}${/}bgp_peer mapping=${mapping} session=${CONFIG_SESSION}
+ &{mapping} BuiltIn.Create_Dictionary
+ ... DEVICE_NAME=${DEVICE_NAME}
+ ... BGP_NAME=${BGP_PEER_NAME}
+ ... IP=${TOOLS_SYSTEM_IP}
+ ... BGP_RIB_OPENCONFIG=${RIB_NAME}
+ TemplatedRequests.Delete_Templated
+ ... ${BGP_VARIABLES_FOLDER}${/}bgp_peer
+ ... mapping=${mapping}
+ ... session=${CONFIG_SESSION}
+
*** Keywords ***
Setup_Everything
SSHLibrary.Put_File ${CURDIR}/../../../../tools/fastbgp/play.py
RequestsLibrary.Create_Session ${CONFIG_SESSION} http://${ODL_SYSTEM_IP}:${RESTCONFPORT} auth=${AUTH}
KarafKeywords.Execute_Controller_Karaf_Command_On_Background log:set ${ODL_LOG_LEVEL}
- KarafKeywords.Execute_Controller_Karaf_Command_On_Background log:set ${ODL_BGP_LOG_LEVEL} org.opendaylight.bgpcep
- KarafKeywords.Execute_Controller_Karaf_Command_On_Background log:set ${ODL_BGP_LOG_LEVEL} org.opendaylight.protocol
+ KarafKeywords.Execute_Controller_Karaf_Command_On_Background
+ ... log:set ${ODL_BGP_LOG_LEVEL} org.opendaylight.bgpcep
+ KarafKeywords.Execute_Controller_Karaf_Command_On_Background
+ ... log:set ${ODL_BGP_LOG_LEVEL} org.opendaylight.protocol
Teardown_Everything
[Documentation] Make sure Python tool was killed, delete all sessions, tear down imported Resources.
SSHLibrary.Close_All_Connections
Wait_For_Topology_To_Change_To
- [Arguments] ${folder_name} ${timeout}=10s ${refresh}=1s
[Documentation] Wait until Compare_Topology matches expected result.
+ [Arguments] ${folder_name} ${timeout}=10s ${refresh}=1s
BuiltIn.Wait_Until_Keyword_Succeeds ${timeout} ${refresh} Compare_Topology ${folder_name}
Verify_That_Topology_Does_Not_Change_From
- [Arguments] ${folder_name} ${timeout}=10s ${refresh}=1s
[Documentation] Verify that Compare_Topology keeps passing, it will hold its last result.
- WaitForFailure.Verify_Keyword_Does_Not_Fail_Within_Timeout ${timeout} ${refresh} Compare_Topology ${folder_name}
+ [Arguments] ${folder_name} ${timeout}=10s ${refresh}=1s
+ WaitForFailure.Verify_Keyword_Does_Not_Fail_Within_Timeout
+ ... ${timeout}
+ ... ${refresh}
+ ... Compare_Topology
+ ... ${folder_name}
Compare_Topology
- [Arguments] ${folder_name}
[Documentation] Get current example-ipv4-topology as json, and compare it to expected result.
- TemplatedRequests.Get_As_Json_Templated ${BGP_VARIABLES_FOLDER}${/}${folder_name} session=${CONFIG_SESSION} verify=True
+ [Arguments] ${folder_name}
+ TemplatedRequests.Get_As_Json_Templated
+ ... ${BGP_VARIABLES_FOLDER}${/}${folder_name}
+ ... session=${CONFIG_SESSION}
+ ... verify=True
Check_Speaker_Is_Not_Connected
[Documentation] Give it a few tries to see zero established connections.
BuiltIn.Wait_Until_Keyword_Succeeds 5s 1s Check_Number_Of_Speaker_Connections 1
Check_Number_Of_Speaker_Connections
- [Arguments] ${howmany}
[Documentation] Run netstat in mininet machine and parse it for number of established connections. Check it is ${howmany}.
- ${output}= SSHKeywords.Count_Port_Occurences 17900 ESTABLISHED python
+ [Arguments] ${howmany}
+ ${output} SSHKeywords.Count_Port_Occurences 17900 ESTABLISHED python
BuiltIn.Should_Be_Equal_As_Strings ${output} ${howmany}
Configure_Peer_Group
- [Arguments] ${peer_group_folder}=peer_group
[Documentation] Configures peer group which is template for all the neighbors which are going
... to be configured. Also after PUT, this case verifies presence of peer group within
- ... peer-groups. This case is specific to versions Fluorine and above.
- &{mapping} Create Dictionary DEVICE_NAME=${DEVICE_NAME} HOLDTIME=${HOLDTIME} PEER_PORT=${BGP_TOOL_PORT} INITIATE=false BGP_RIB=${RIB_NAME}
- ... PASSIVE_MODE=true BGP_RIB_OPENCONFIG=${RIB_NAME} PEER_GROUP_NAME=${PEER_GROUP} RR_CLIENT=false
- TemplatedRequests.Put_As_Xml_Templated ${BGP_VARIABLES_FOLDER}${/}${peer_group_folder} mapping=${mapping} session=${CONFIG_SESSION}
- TemplatedRequests.Get_As_Json_Templated ${BGP_VARIABLES_FOLDER}${/}verify_${peer_group_folder} mapping=${mapping} session=${CONFIG_SESSION} verify=True
+ ... peer-groups.
+ [Arguments] ${peer_group_folder}=peer_group
+ &{mapping} Create Dictionary
+ ... DEVICE_NAME=${DEVICE_NAME}
+ ... HOLDTIME=${HOLDTIME}
+ ... PEER_PORT=${BGP_TOOL_PORT}
+ ... INITIATE=false
+ ... BGP_RIB=${RIB_NAME}
+ ... PASSIVE_MODE=true
+ ... BGP_RIB_OPENCONFIG=${RIB_NAME}
+ ... PEER_GROUP_NAME=${PEER_GROUP}
+ ... RR_CLIENT=false
+ ${verify_peer_group_folder} CompareStream.Run_Keyword_If_At_Least_Else
+ ... sulfur
+ ... BuiltIn.Set Variable
+ ... verify_${peer_group_folder}.sulfur
+ ... ELSE
+ ... BuiltIn.Set Variable
+ ... verify_${peer_group_folder}
+ TemplatedRequests.Put_As_Xml_Templated
+ ... ${BGP_VARIABLES_FOLDER}${/}${peer_group_folder}
+ ... mapping=${mapping}
+ ... session=${CONFIG_SESSION}
+ TemplatedRequests.Get_As_Json_Templated
+ ... ${BGP_VARIABLES_FOLDER}${/}${verify_peer_group_folder}
+ ... mapping=${mapping}
+ ... session=${CONFIG_SESSION}
+ ... verify=True
Deconfigure_Peer_Group
[Documentation] Deconfigures peer group which is template for all the neighbors
- ... This test case is specific to versions Fluorine and above.
- &{mapping} Create Dictionary DEVICE_NAME=${DEVICE_NAME} HOLDTIME=${HOLDTIME} PEER_PORT=${BGP_TOOL_PORT} INITIATE=false BGP_RIB=${RIB_NAME}
- ... PASSIVE_MODE=true BGP_RIB_OPENCONFIG=${RIB_NAME} PEER_GROUP_NAME=${PEER_GROUP} RR_CLIENT=false
- TemplatedRequests.Delete_Templated ${BGP_VARIABLES_FOLDER}${/}peer_group mapping=${mapping} session=${CONFIG_SESSION}
+ &{mapping} Create Dictionary
+ ... DEVICE_NAME=${DEVICE_NAME}
+ ... HOLDTIME=${HOLDTIME}
+ ... PEER_PORT=${BGP_TOOL_PORT}
+ ... INITIATE=false
+ ... BGP_RIB=${RIB_NAME}
+ ... PASSIVE_MODE=true
+ ... BGP_RIB_OPENCONFIG=${RIB_NAME}
+ ... PEER_GROUP_NAME=${PEER_GROUP}
+ ... RR_CLIENT=false
+ TemplatedRequests.Delete_Templated
+ ... ${BGP_VARIABLES_FOLDER}${/}peer_group
+ ... mapping=${mapping}
+ ... session=${CONFIG_SESSION}
Restart_Talking_BGP_Speaker
[Documentation] Abort the Python speaker. Also, attempt to stop failing fast. And Start it again.
... We have to restart it this way because we reset session before
BGPSpeaker.Kill_BGP_Speaker
FailFast.Do_Not_Fail_Fast_From_Now_On
- BGPSpeaker.Start_BGP_Speaker --amount 3 --myip=${TOOLS_SYSTEM_IP} --myport=${BGP_TOOL_PORT} --peerip=${ODL_SYSTEM_IP} --peerport=${ODL_BGP_PORT} --${BGP_TOOL_LOG_LEVEL}
+ BGPSpeaker.Start_BGP_Speaker
+ ... --amount 3 --myip=${TOOLS_SYSTEM_IP} --myport=${BGP_TOOL_PORT} --peerip=${ODL_SYSTEM_IP} --peerport=${ODL_BGP_PORT} --${BGP_TOOL_LOG_LEVEL}
Read_And_Fail_If_Prompt_Is_Seen
Code Review / integration / test.git / blobdiff