... Start pcc-mock (reconnecting mode): 1 pcc, 1 lsp, password set, check pcep-topology stays empty.
... Use restconf to change PCEP configuration to use a wrong password, check pcep-topology stays empty.
... Change ODL PCEP configuration to use the correct password, check pcep-topology shows the lsp.
+... Stop pcc-mock, check pcep-topology stays empty.
+... Start pcc-mock with new password, check pcep-topology stays empty.
+... Change ODL PCEP configuration to use the correct password, check pcep-topology shows the lsp.
... Update the lsp, check a change in pcep-topology.
... Change ODL PCEP configuration to not use password, pcep-topology empties, kill pcep-pcc-mock.
...
Start_Secure_Pcc_Mock
[Documentation] Execute pcc-mock on Mininet with password set, fail if pcc-mock promptly exits. Keep pcc-mock running for next test cases.
- ${command}= NexusKeywords.Compose_Full_Java_Command -jar ${filename} --password topsecret --reconnect 1 --local-address ${TOOLS_SYSTEM_IP} --remote-address ${ODL_SYSTEM_IP} 2>&1 | tee pccmock.log
- BuiltIn.Log ${command}
- SSHLibrary.Write ${command}
- Read_And_Fail_If_Prompt_Is_Seen
+ Start_Pcc_Mock_Tool_With_Password password=topsecret
Topology_Unauthorized_1
[Documentation] Try to catch a glimpse of pcc-mock in pcep-topology. Pass if no change from Precondition is detected over 10 seconds.
CompareStream.Run_Keyword_If_At_Least_Oxygen BuiltIn.Wait_Until_Keyword_Succeeds 30s 1s TemplatedRequests.Get_As_Json_Templated ${DIR_WITH_TEMPLATES}${/}default_on_state ${mapping}
... ${CONFIG_SESSION} verify=True
+Stop_Pcc_Mock_1
+ [Documentation] Stops First instance of pcc-mock.
+ [Setup] FailFast.Run_Even_When_Failing_Fast
+ Stop_Pcc_Mock_Tool
+ FailFast.Do_Not_Fail_Fast_From_Now_On
+ # NOTE: It is still possible to remain failing, if both previous and this test failed.
+ [Teardown] FailFast.Do_Not_Start_Failing_If_This_Failed
+
+Topology_Unauthorized_3
+ [Documentation] The same logic as Topology_Unauthorized_1, with no pcc-mock running.
+ [Tags] critical
+ BuiltIn.Wait_Until_Keyword_Succeeds 10s 1s Test_Unauthorized
+
+Start_Secure_Pcc_Mock_2
+ [Documentation] Execute pcc-mock on Mininet with new password set, fail if pcc-mock promptly exits. Keep pcc-mock running for next test cases.
+ Start_Pcc_Mock_Tool_With_Password password=newtopsecret
+
+Topology_Unauthorized_4
+ [Documentation] The same logic as Topology_Unauthorized_1, but ODL password became incorrect with new pcc-mock running.
+ [Tags] critical
+ WaitForFailure.Verify_Keyword_Does_Not_Fail_Within_Timeout 10s 1s Test_Unauthorized
+
+Set_Correct_Password_2
+ [Documentation] Configure password in pcep dispatcher for client with Mininet IP address.
+ ... This password again matches what second pcc-mock instance uses.
+ CompareStream.Run_Keyword_If_At_Least_Oxygen Replace_Password_On_Pcep_Node password=newtopsecret
+ CompareStream.Run_Keyword_If_Less_Than_Oxygen Set_Password_Less_Than_Oxygen password=newtopsecret
+
+Topology_Intercondition_2
+ [Documentation] Compare pcep-topology/path-computation-client to filled one, which includes a tunnel from pcc-mock.
+ ... For oxygen compares full pcep-topology including pcep-session-state
+ &{mapping} BuiltIn.Create_Dictionary IP=${TOOLS_SYSTEM_IP} CODE=${pcc_name_code} NAME=${pcc_name} IP_ODL=${ODL_SYSTEM_IP}
+ BuiltIn.Wait_Until_Keyword_Succeeds 10s 1s TemplatedRequests.Get_As_Json_Templated ${DIR_WITH_TEMPLATES}${/}default_on ${mapping} ${CONFIG_SESSION}
+ ... verify=True
+ CompareStream.Run_Keyword_If_At_Least_Oxygen BuiltIn.Wait_Until_Keyword_Succeeds 30s 1s TemplatedRequests.Get_As_Json_Templated ${DIR_WITH_TEMPLATES}${/}default_on_state ${mapping}
+ ... ${CONFIG_SESSION} verify=True
+
Update_Delegated
[Documentation] Perform update-lsp on the mocked tunnel, check response is success.
&{mapping} BuiltIn.Create_Dictionary IP=${TOOLS_SYSTEM_IP} NAME=${pcc_name}
# NOTE: It is still possible to remain failing, if both previous and this test failed.
[Teardown] FailFast.Do_Not_Start_Failing_If_This_Failed
-Topology_Unauthorized_3
+Topology_Unauthorized_5
[Documentation] Wait for pcep-topology to become empty again.
[Tags] critical
BuiltIn.Wait_Until_Keyword_Succeeds 10s 1s Test_Unauthorized
-Stop_Pcc_Mock
- [Documentation] Send ctrl+c to pcc-mock, fails if no prompt is seen
- ... after 3 seconds (the default for SSHLibrary)
+Stop_Pcc_Mock_2
+ [Documentation] Stops second instance of pcc-mock
[Setup] FailFast.Run_Even_When_Failing_Fast
- RemoteBash.Write_Bare_Ctrl_C
- ${output}= SSHLibrary.Read_Until_Prompt
- BuiltIn.Log ${output}
+ Stop_Pcc_Mock_Tool
FailFast.Do_Not_Fail_Fast_From_Now_On
# NOTE: It is still possible to remain failing, if both previous and this test failed.
[Teardown] FailFast.Do_Not_Start_Failing_If_This_Failed
${password_line}= Construct_Password_Element_Line_Using_Password password=${password}
Replace_Password_Xml_Element_In_Pcep_Client_Module_Less_Than_Oxygen ${password_line}
-Read_And_Fail_If_Prompt_Is_Seen
- [Documentation] Try to read SSH to see prompt, but expect to see no prompt within SSHLibrary's timeout.
- BuiltIn.Run_Keyword_And_Expect_Error No match found for '${prompt}' in *. Read_Text_Before_Prompt
-
Read_Text_Before_Prompt
[Documentation] Log text gathered by SSHLibrary.Read_Until_Prompt.
... This needs to be a separate keyword just because how Read_And_Fail_If_Prompt_Is_Seen is implemented.
[Documentation] Send restconf PUT to replace the config module specifying PCEP password element (may be empty=missing).
&{mapping} BuiltIn.Create_Dictionary IP=${TOOLS_SYSTEM_IP} PASSWD=${password_element}
TemplatedRequests.Put_As_Xml_Templated ${DIR_WITH_TEMPLATES}${/}pcep_topology_client_module mapping=${mapping}
+
+Stop_Pcc_Mock_Tool
+ [Documentation] Send ctrl+c to pcc-mock, fails if no prompt is seen
+ ... after 3 seconds (the default for SSHLibrary)
+ RemoteBash.Write_Bare_Ctrl_C
+ ${output}= SSHLibrary.Read_Until_Prompt
+ BuiltIn.Log ${output}
+
+Start_Pcc_Mock_Tool_With_Password
+ [Arguments] ${password}
+ [Documentation] Starts pcc-mock with password argument.
+ ${command}= NexusKeywords.Compose_Full_Java_Command -jar ${filename} --password ${password} --reconnect 1 --local-address ${TOOLS_SYSTEM_IP} --remote-address ${ODL_SYSTEM_IP} 2>&1 | tee pccmock.log
+ BuiltIn.Log ${command}
+ SSHLibrary.Write ${command}
Code Review / integration / test.git / blobdiff