BFD_TC00 Create ITM between DPNs
[Documentation] Create ITM between DPNs
Genius.Create Vteps ${NO_VLAN} ${gateway_ip}
- Wait Until Keyword Succeeds 30s 5s Genius.Verify Tunnel Status As Up
+ BuiltIn.Wait Until Keyword Succeeds 30s 5s Genius.Verify Tunnel Status As Up
BFD_TC01 Verify default BFD monitoring status on Controller
[Documentation] Verify the default value of BFD monitoring \ on the Controller
- CompareStream.Run_Keyword_If_At_Least_Neon Wait Until Keyword Succeeds 10s 2s Verify Tunnel Monitoring Status ${TUNNEL_MONITOR_OFF}
- CompareStream.Run_Keyword_If_Less_Than_Neon Wait Until Keyword Succeeds 10s 2s Verify Tunnel Monitoring Status ${TUNNEL_MONITOR_ON}
- CompareStream.Run_Keyword_If_At_Least_Neon Wait Until Keyword Succeeds 10s 2s Verify Config Ietf Interface Output ${INTERFACE_DS_MONI_FALSE} ${INTERFACE_DS_MONI_INT_1000}
+ CompareStream.Run_Keyword_If_At_Least_Neon BuiltIn.Wait Until Keyword Succeeds 10s 2s Genius.Verify Tunnel Monitoring Status ${TUNNEL_MONITOR_OFF}
+ CompareStream.Run_Keyword_If_Less_Than_Neon BuiltIn.Wait Until Keyword Succeeds 10s 2s Genius.Verify Tunnel Monitoring Status ${TUNNEL_MONITOR_ON}
+ CompareStream.Run_Keyword_If_At_Least_Neon BuiltIn.Wait Until Keyword Succeeds 10s 2s Verify Config Ietf Interface Output ${INTERFACE_DS_MONI_FALSE} ${INTERFACE_DS_MONI_INT_1000}
... ${TUNNEL_MONI_PROTO}
- CompareStream.Run_Keyword_If_Less_Than_Neon Wait Until Keyword Succeeds 10s 2s Verify Config Ietf Interface Output ${INTERFACE_DS_MONI_TRUE} ${INTERFACE_DS_MONI_INT_1000}
+ CompareStream.Run_Keyword_If_Less_Than_Neon BuiltIn.Wait Until Keyword Succeeds 10s 2s Verify Config Ietf Interface Output ${INTERFACE_DS_MONI_TRUE} ${INTERFACE_DS_MONI_INT_1000}
... ${TUNNEL_MONI_PROTO}
BFD_TC02 Enable BFD Monitoring And Verify On Controller
BFD_TC03 Verify that BFD tunnel monitoring interval is set with appropriate default value i.e.,1000
[Documentation] This will verify BFD tunnel monitoring default interval
- ${output} = Issue Command On Karaf Console ${TEP_SHOW}
- ${tunnel_monitoring} = Get Lines Containing String ${output} Tunnel Monitoring Interval
- Should Be Equal ${tunnel_monitoring} ${DEFAULT_MONITORING_INTERVAL}
- Wait Until Keyword Succeeds 10s 2s Verify Config Ietf Interface Output ${INTERFACE_DS_MONI_TRUE} ${INTERFACE_DS_MONI_INT_1000} ${TUNNEL_MONI_PROTO}
+ ${output} = KarafKeywords.Issue Command On Karaf Console ${TEP_SHOW}
+ ${tunnel_monitoring} = String.Get Lines Containing String ${output} Tunnel Monitoring Interval
+ BuiltIn.Should Be Equal ${tunnel_monitoring} ${DEFAULT_MONITORING_INTERVAL}
+ BuiltIn.Wait Until Keyword Succeeds 10s 2s Verify Config Ietf Interface Output ${INTERFACE_DS_MONI_TRUE} ${INTERFACE_DS_MONI_INT_1000} ${TUNNEL_MONI_PROTO}
BFD_TC04 Verify that in controller tunnel status is up when ITM tunnel interface is brought up.
[Documentation] Verify that in controller tunnel status is up when ITM tunnel interface is brought up.
- Wait Until Keyword Succeeds 10s 2s Verify Tunnel Monitoring Status ${TUNNEL_MONITOR_ON}
- Wait Until Keyword Succeeds 10s 1s Genius.Verify Tunnel Status As Up
- Wait Until Keyword Succeeds 10s 2s Verify Config Ietf Interface Output ${INTERFACE_DS_MONI_TRUE} ${INTERFACE_DS_MONI_INT_1000} ${TUNNEL_MONI_PROTO}
+ BuiltIn.Wait Until Keyword Succeeds 10s 2s Genius.Verify Tunnel Monitoring Status ${TUNNEL_MONITOR_ON}
+ BuiltIn.Wait Until Keyword Succeeds 10s 1s Genius.Verify Tunnel Status As Up
+ BuiltIn.Wait Until Keyword Succeeds 10s 2s Verify Config Ietf Interface Output ${INTERFACE_DS_MONI_TRUE} ${INTERFACE_DS_MONI_INT_1000} ${TUNNEL_MONI_PROTO}
BFD_TC05 Verify BFD tunnel monitoring interval can be changed.
[Documentation] Verify BFD tunnel monitoring interval can be changed.
- ${oper_int} RequestsLibrary.Put Request session ${CONFIG_API}/itm-config:tunnel-monitor-interval/ data=${INTERVAL_5000}
- ${Bfd_updated_value}= Create List 5000
- Wait Until Keyword Succeeds 30s 10s Check For Elements At URI ${OPERATIONAL_API}/itm-config:tunnel-monitor-interval/ ${Bfd_updated_value}
- Wait Until Keyword Succeeds 30s 10s Check For Elements At URI ${CONFIG_API}/itm-config:tunnel-monitor-interval/ ${Bfd_updated_value}
+ ${oper_int} = RequestsLibrary.Put Request session ${CONFIG_API}/itm-config:tunnel-monitor-interval/ data=${INTERVAL_5000}
+ ${Bfd_updated_value}= BuiltIn.Create List 5000
+ Wait Until Keyword Succeeds 30s 10s Utils.Check For Elements At URI ${OPERATIONAL_API}/itm-config:tunnel-monitor-interval/ ${Bfd_updated_value}
+ Wait Until Keyword Succeeds 30s 10s Utils.Check For Elements At URI ${CONFIG_API}/itm-config:tunnel-monitor-interval/ ${Bfd_updated_value}
Wait Until Keyword Succeeds 10s 2s Verify Config Ietf Interface Output ${INTERFACE_DS_MONI_TRUE} ${INTERFACE_DS_MONI_INT_5000} ${TUNNEL_MONI_PROTO}
- : FOR ${tool_system_index} IN RANGE ${NUM_TOOLS_SYSTEM}
- \ ${tun_names} Genius.Get Tunnels On OVS ${TOOLS_SYSTEM_ALL_CONN_IDS[${tool_system_index}]}
- \ Verify ovs-vsctl Output For Each Tunnel ${tun_names} ${tool_system_index}
+ FOR ${tool_system_index} IN RANGE ${NUM_TOOLS_SYSTEM}
+ ${tun_names} Genius.Get Tunnels On OVS ${TOOLS_SYSTEM_ALL_CONN_IDS[${tool_system_index}]}
+ Verify ovs-vsctl Output For Each Tunnel ${tun_names} ${tool_system_index}
+ END
BFD_TC06 Verify that the tunnel state goes to UNKNOWN when DPN is disconnected
[Documentation] Verify that the tunnel state goes to UNKNOWN when DPN is disconnected
ToolsSystem.Run Command On All Tools Systems sudo ovs-vsctl del-controller ${Bridge}
- Wait Until Keyword Succeeds 10s 1s Verify Tunnel Status as UNKNOWN
- Wait Until Keyword Succeeds 10s 2s Verify Config Ietf Interface Output ${INTERFACE_DS_MONI_TRUE} ${INTERFACE_DS_MONI_INT_5000} ${TUNNEL_MONI_PROTO}
+ BuiltIn.Wait Until Keyword Succeeds 10s 1s VpnOperations.Verify Tunnel Status as UNKNOWN
+ BuiltIn.Wait Until Keyword Succeeds 10s 2s Verify Config Ietf Interface Output ${INTERFACE_DS_MONI_TRUE} ${INTERFACE_DS_MONI_INT_5000} ${TUNNEL_MONI_PROTO}
ToolsSystem.Run Command On All Tools Systems sudo ovs-vsctl set-controller ${Bridge} tcp:${ODL_SYSTEM_IP}:${ODL_OF_PORT}
- Wait Until Keyword Succeeds 10s 1s Genius.Verify Tunnel Status As Up
- Wait Until Keyword Succeeds 10s 2s Verify Config Ietf Interface Output ${INTERFACE_DS_MONI_TRUE} ${INTERFACE_DS_MONI_INT_5000} ${TUNNEL_MONI_PROTO}
+ BuiltIn.Wait Until Keyword Succeeds 10s 1s Genius.Verify Tunnel Status As Up
+ BuiltIn.Wait Until Keyword Succeeds 10s 2s Verify Config Ietf Interface Output ${INTERFACE_DS_MONI_TRUE} ${INTERFACE_DS_MONI_INT_5000} ${TUNNEL_MONI_PROTO}
BFD_TC07 Set BFD monitoring To Default Value
[Documentation] Disable BFD monitoring(setting it to default value) and verify that BFD is disabled on the controller.
Verify Config Ietf Interface Output
[Arguments] ${state} ${interval} ${proto}
[Documentation] This keyword will get request from config ietf interface and verifies state, interval and proto are present
- ${int_resp} RequestsLibrary.Get Request session ${CONFIG_API}/ietf-interfaces:interfaces/
- ${respjson} RequestsLibrary.To Json ${int_resp.content} pretty_print=True
- Should Contain ${respjson} ${state}
- Should Contain ${respjson} ${interval}
- Should Contain ${respjson} ${proto}
+ ${int_resp} = RequestsLibrary.Get Request session ${CONFIG_API}/ietf-interfaces:interfaces/
+ ${respjson} = RequestsLibrary.To Json ${int_resp.content} pretty_print=True
+ BuiltIn.Should Contain ${respjson} ${state}
+ BuiltIn.Should Contain ${respjson} ${interval}
+ BuiltIn.Should Contain ${respjson} ${proto}
Ovs Tunnel Get
[Arguments] ${tools_ip}
[Documentation] This keyword will return the tunnel name on OVS
- ${list_interface} Utils.Run Command On Remote System ${tools_ip} sudo ovs-vsctl list interface
- ${tun_line} ${tun_name} Should Match Regexp ${list_interface} name\\s+: "(tun.*)"
- log ${tun_name}
- Should Not Be Empty ${tun_name}
+ ${list_interface} = Utils.Run Command On Remote System ${tools_ip} sudo ovs-vsctl list interface
+ ${tun_line} = ${tun_name} BuiltIn.Should Match Regexp ${list_interface} name\\s+: "(tun.*)"
+ BuiltIn.Log ${tun_name}
+ BuiltIn.Should Not Be Empty ${tun_name}
[Return] ${tun_name}
Verify Tunnel Monitoring Params
[Arguments] ${flag}
[Documentation] This keyword will verify the tunnel monitoring is true or false
- @{checklist} create list ${flag}
- Check For Elements At URI ${OPERATIONAL_API}/itm-config:tunnel-monitor-params/ ${checklist}
+ @{checklist} BuiltIn.Create List ${flag}
+ Utils.Check For Elements At URI ${OPERATIONAL_API}/itm-config:tunnel-monitor-params/ ${checklist}
Enable BFD And Verify
[Arguments] ${interface_ds_moni_int}
[Documentation] Enable BFD Monitoring And Verify On Controller.
- ${resp} RequestsLibrary.Put Request session ${CONFIG_API}/itm-config:tunnel-monitor-params/ data=${ENABLE_MONITORING}
- Should Be Equal As Strings ${resp.status_code} 201
- Wait Until Keyword Succeeds 10s 2s Verify Tunnel Monitoring Params ${TUNNEL_MONI_PARAMS_TRUE}
- Wait Until Keyword Succeeds 10s 2s Verify Tunnel Monitoring Status ${TUNNEL_MONITOR_ON}
- Wait Until Keyword Succeeds 10s 2s Verify Config Ietf Interface Output ${INTERFACE_DS_MONI_TRUE} ${interface_ds_moni_int} ${TUNNEL_MONI_PROTO}
- Wait Until Keyword Succeeds 10s 1s Genius.Verify Tunnel Status As Up
+ ${resp} = RequestsLibrary.Put Request session ${CONFIG_API}/itm-config:tunnel-monitor-params/ data=${ENABLE_MONITORING}
+ BuiltIn.Should Be Equal As Strings ${resp.status_code} 201
+ BuiltIn.Wait Until Keyword Succeeds 10s 2s Verify Tunnel Monitoring Params ${TUNNEL_MONI_PARAMS_TRUE}
+ BuiltIn.Wait Until Keyword Succeeds 10s 2s Genius.Verify Tunnel Monitoring Status ${TUNNEL_MONITOR_ON}
+ BuiltIn.Wait Until Keyword Succeeds 10s 2s Verify Config Ietf Interface Output ${INTERFACE_DS_MONI_TRUE} ${interface_ds_moni_int} ${TUNNEL_MONI_PROTO}
+ BuiltIn.Wait Until Keyword Succeeds 10s 1s Genius.Verify Tunnel Status As Up
Disable BFD And Verify
[Documentation] Disable BFD Monitoring And Verify On Controller.
- ${resp} RequestsLibrary.Put Request session ${CONFIG_API}/itm-config:tunnel-monitor-params/ data=${DISABLE_MONITORING}
- Should Be Equal As Strings ${resp.status_code} 200
- Wait Until Keyword Succeeds 10s 2s Verify Tunnel Monitoring Params ${TUNNEL_MONI_PARAMS_FALSE}
- Wait Until Keyword Succeeds 10s 2s Verify Tunnel Monitoring Status ${TUNNEL_MONITOR_OFF}
- Wait Until Keyword Succeeds 10s 2s Verify Config Ietf Interface Output ${INTERFACE_DS_MONI_FALSE} ${INTERFACE_DS_MONI_INT_5000} ${TUNNEL_MONI_PROTO}
- Wait Until Keyword Succeeds 10s 1s Genius.Verify Tunnel Status As Up
+ ${resp} = RequestsLibrary.Put Request session ${CONFIG_API}/itm-config:tunnel-monitor-params/ data=${DISABLE_MONITORING}
+ BuiltIn.Should Be Equal As Strings ${resp.status_code} 200
+ BuiltIn.Wait Until Keyword Succeeds 10s 2s Verify Tunnel Monitoring Params ${TUNNEL_MONI_PARAMS_FALSE}
+ BuiltIn.Wait Until Keyword Succeeds 10s 2s Genius.Verify Tunnel Monitoring Status ${TUNNEL_MONITOR_OFF}
+ BuiltIn.Wait Until Keyword Succeeds 10s 2s Verify Config Ietf Interface Output ${INTERFACE_DS_MONI_FALSE} ${INTERFACE_DS_MONI_INT_5000} ${TUNNEL_MONI_PROTO}
+ BuiltIn.Wait Until Keyword Succeeds 10s 1s Genius.Verify Tunnel Status As Up
Verify ovs-vsctl Output For Each Tunnel
[Arguments] ${tun_names} ${tool_system_index}
${no of tunnels} = BuiltIn.Get Length ${tun_names}
- : FOR ${each_tun} IN RANGE ${no of tunnels}
- \ ${tun} Collections.Get From List ${tun_names} ${each_tun}
- \ BuiltIn.Wait Until Keyword Succeeds 20 5 OVSDB.Verify Ovs-vsctl Output list interface ${tun} 5000
- \ ... ovs_system=@{TOOLS_SYSTEM_ALL_IPS}[${tool_system_index}]
+ FOR ${each_tun} IN RANGE ${no of tunnels}
+ ${tun} Collections.Get From List ${tun_names} ${each_tun}
+ BuiltIn.Wait Until Keyword Succeeds 20 5 OVSDB.Verify Ovs-vsctl Output list interface ${tun} 5000
+ ... ovs_system=@{TOOLS_SYSTEM_ALL_IPS}[${tool_system_index}]
+ END
Code Review / integration / test.git / blobdiff