Suite Teardown ITM Direct Tunnels Stop Suite
Test Setup Genius Test Setup
Test Teardown Genius Test Teardown ${data_models}
+Library Collections
Library OperatingSystem
-Library String
Library RequestsLibrary
-Variables ../../variables/genius/Modules.py
-Resource ../../libraries/DataModels.robot
-Library Collections
-Resource ../../libraries/Utils.robot
-Library re
-Resource ../../libraries/VpnOperations.robot
+Library String
Resource ../../libraries/ClusterManagement.robot
-Resource ../../libraries/KarafKeywords.robot
-Resource ../../libraries/Utils.robot
+Resource ../../libraries/DataModels.robot
Resource ../../libraries/Genius.robot
+Resource ../../libraries/KarafKeywords.robot
Resource ../../variables/netvirt/Variables.robot
-Resource ../../variables/Variables.robot
Resource ../../libraries/OVSDB.robot
+Resource ../../libraries/ToolsSystem.robot
+Resource ../../libraries/Utils.robot
+Resource ../../libraries/VpnOperations.robot
+Resource ../../variables/Variables.robot
+Variables ../../variables/genius/Modules.py
*** Variables ***
-${VLAN} 0
*** Test Cases ***
Create and Verify VTEP
[Documentation] This testcase creates a Internal Transport Manager - ITM tunnel between 2 DPNs
- ${Dpn_id_1} Genius.Get Dpn Ids ${conn_id_1}
- ${Dpn_id_2} Genius.Get Dpn Ids ${conn_id_2}
- ${gateway-ip}= Set Variable 0.0.0.0
- Genius.Create Vteps ${Dpn_id_1} ${Dpn_id_2} ${TOOLS_SYSTEM_IP} ${TOOLS_SYSTEM_2_IP} ${VLAN} ${gateway-ip}
- Wait Until Keyword Succeeds 40 10 Get ITM ${itm_created[0]} ${subnet} ${VLAN}
- ... ${Dpn_id_1} ${TOOLS_SYSTEM_IP} ${Dpn_id_2} ${TOOLS_SYSTEM_2_IP}
- ${type} Set Variable odl-interface:tunnel-type-vxlan
- ${tunnel-1} Wait Until Keyword Succeeds 40 20 Get_Tunnel ${Dpn_id_1} ${Dpn_id_2}
- ${tunnel-2} Wait Until Keyword Succeeds 40 20 Get_Tunnel ${Dpn_id_2} ${Dpn_id_1}
- ${tunnel-type}= Set Variable type: vxlan
- Wait Until Keyword Succeeds 40 5 Get Data From URI session ${CONFIG_API}/itm-state:dpn-endpoints/DPN-TEPs-info/${Dpn_id_1}/
- Wait Until Keyword Succeeds 40 5 Get Data From URI session ${CONFIG_API}/itm-state:dpn-endpoints/DPN-TEPs-info/${Dpn_id_2}/
- Wait Until Keyword Succeeds 40 10 Ovs Verification For 2 Dpn ${conn_id_1} ${TOOLS_SYSTEM_IP} ${TOOLS_SYSTEM_2_IP}
- ... ${tunnel-1} ${tunnel-type}
- Wait Until Keyword Succeeds 40 10 Ovs Verification For 2 Dpn ${conn_id_2} ${TOOLS_SYSTEM_2_IP} ${TOOLS_SYSTEM_IP}
- ... ${tunnel-2} ${tunnel-type}
- ${resp} RequestsLibrary.Get Request session ${OPERATIONAL_API}/itm-state:tunnels_state/
- ${respjson} RequestsLibrary.To Json ${resp.content} pretty_print=True
+ Genius.Create Vteps ${NO_VLAN} ${gateway_ip}
+ Wait Until Keyword Succeeds 40 10 Genius.Get ITM ${itm_created[0]} ${SUBNET} ${NO_VLAN}
+ ${type} = BuiltIn.Set Variable odl-interface:tunnel-type-vxlan
+ Genius.Update Dpn id list and get tunnels ${type} dpn-teps-state
+ Genius.Verify Response Code Of Dpn Endpointconfig API
+ Wait Until Keyword Succeeds 40 10 Genius.Ovs Interface Verification
+ ${resp} = RequestsLibrary.Get Request session ${OPERATIONAL_API}/itm-state:tunnels_state/
Should Be Equal As Strings ${resp.status_code} 200
- Should Contain ${resp.content} ${Dpn_id_1} ${tunnel-1}
- Should Contain ${resp.content} ${Dpn_id_2} ${tunnel-2}
- ${Port_num1} Get Port Number ${conn_id_1} ${Bridge} ${tunnel-1}
- ${Port_num2} Get Port Number ${conn_id_2} ${Bridge} ${tunnel-2}
- ${check-3} Wait Until Keyword Succeeds 40 10 Genius.Check Table0 Entry For 2 Dpn ${conn_id_1} ${Bridge}
- ... ${Port_num1}
- ${check-4} Wait Until Keyword Succeeds 40 10 Genius.Check Table0 Entry For 2 Dpn ${conn_id_2} ${Bridge}
- ... ${Port_num2}
+ Wait Until Keyword Succeeds 60 5 Genius.Verify Tunnel Status As Up
+ Wait Until Keyword Succeeds 40 10 Genius.Verify Table0 Entry After fetching Port Number
Verify VTEP After Restarting OVS
[Documentation] Verify Testcase, Verifying tunnel state by restarting OVS
- Wait Until Keyword Succeeds 20 2 Genius.Verify Tunnel Status as UP TZA
+ Wait Until Keyword Succeeds 20 2 Genius.Verify Tunnel Status As Up
OVSDB.Restart OVSDB ${TOOLS_SYSTEM_IP}
- Wait Until Keyword Succeeds 20 2 Genius.Verify Tunnel Status as UP TZA
Verify VTEP After Restarting Controller
[Documentation] Verify Testcase, Verifying tunnel state by restarting CONTROLLER
- Genius.Verify Tunnel Status as UP TZA
+ BuiltIn.Wait Until Keyword Succeeds 30 3 Genius.Verify Tunnel Status As Up
ClusterManagement.Stop_Members_From_List_Or_All
ClusterManagement.Start_Members_From_List_Or_All
Wait Until Keyword Succeeds 60 3 ClusterManagement.Check Status Of Services Is OPERATIONAL @{GENIUS_DIAG_SERVICES}
- Wait Until Keyword Succeeds 30 3 Genius.Verify Tunnel Status as UP TZA
+ Wait Until Keyword Succeeds 30 3 Genius.Verify Tunnel Status As Up
Verify Tunnels By Enabling/Disabling BFD
[Documentation] Verify tunnel creation by enabling and disabling BFD one after another with respect to the branch in such a way default value is retained at last.
Delete and Verify VTEP
[Documentation] This Delete testcase , deletes the ITM tunnel created between 2 dpns.
- ${Dpn_id_1} Genius.Get Dpn Ids ${conn_id_1}
- ${Dpn_id_2} Genius.Get Dpn Ids ${conn_id_2}
- ${tunnel-1} Get_Tunnel ${Dpn_id_1} ${Dpn_id_2}
- ${tunnel-2} Get_Tunnel ${Dpn_id_2} ${Dpn_id_1}
- Remove All Elements At URI And Verify ${CONFIG_API}/itm:transport-zones/transport-zone/${itm_created[0]}/subnets/${subnet}%2F24/vteps/${Dpn_id_1}/${port_name}
- Remove All Elements At URI And Verify ${CONFIG_API}/itm:transport-zones/transport-zone/${itm_created[0]}/subnets/${subnet}%2F24/vteps/${Dpn_id_2}/${port_name}
+ ${tunnel_list} Genius.Get Tunnels List
+ : FOR ${dpn_id} IN @{DPN_ID_LIST}
+ \ Utils.Remove All Elements At URI And Verify ${CONFIG_API}/itm:transport-zones/transport-zone/${itm_created[0]}/subnets/${SUBNET}%2F16/vteps/${dpn_id}/${port_name}
${output} KarafKeywords.Issue Command On Karaf Console ${TEP_SHOW}
BuiltIn.Should Not Contain ${output} ${itm_created[0]}
Remove All Elements At URI And Verify ${CONFIG_API}/itm:transport-zones/transport-zone/${itm_created[0]}/
${resp} Utils.Get Data From URI session ${CONFIG_API}/itm:transport-zones/
BuiltIn.Should Not Contain ${resp} ${itm_created[0]}
- ${Ovs-del-1} Wait Until Keyword Succeeds 40 10 Genius.Check Tunnel Delete On OVS ${conn_id_1} ${tunnel-1}
- ${Ovs-del-2} Wait Until Keyword Succeeds 40 10 Genius.Check Tunnel Delete On OVS ${conn_id_2} ${tunnel-2}
+ Wait Until Keyword Succeeds 40 10 Genius.Verify Deleted Tunnels On OVS ${tunnel_list} ${resp}
+ Wait Until Keyword Succeeds 40 10 Genius.Check Tunnel Delete On OVS ${tunnel_list}
*** Keywords ***
-Get_Tunnel
- [Arguments] ${src} ${dst}
- [Documentation] This Keyword Gets the Tunnel Interface name which has been created between 2 DPNS by passing source , destination DPN Ids along with the type of tunnel which is configured.
- ${resp} RequestsLibrary.Get Request session ${CONFIG_API}/itm-state:dpn-teps-state/dpns-teps/${src}/remote-dpns/${dst}/
- log ${resp.content}
- ${respjson} RequestsLibrary.To Json ${resp.content} pretty_print=True
- Should Be Equal As Strings ${resp.status_code} 200
- Should Contain ${resp.content} ${dst}
- ${json}= evaluate json.loads('''${resp.content}''') json
- ${return} Run Keyword And Return Status Should contain ${resp.content} tunnel-name
- log ${return}
- ${ret} Run Keyword If '${return}'=='True' Check_Interface_Name ${json["remote-dpns"][0]} tunnel-name
- [Return] ${ret}
-
-Check_Interface_Name
- [Arguments] ${json} ${expected_tunnel_interface_name}
- [Documentation] This keyword Checks the Tunnel interface name is tunnel-interface-names in the output or not .
- ${Tunnels} Collections.Get From Dictionary ${json} ${expected_tunnel_interface_name}
- Log ${Tunnels}
- [Return] ${Tunnels}
-
Enable_Tunnel_Monitoring
[Documentation] In this we will enable tunnel monitoring by tep:enable command running in karaf console
- ${output} Issue_Command_On_Karaf_Console tep:enable-tunnel-monitor true
+ Issue_Command_On_Karaf_Console tep:enable-tunnel-monitor true
Verify Tunnel State After OVS Restart
[Arguments] ${TOOLS_SYSTEM_IP}
OVSDB.Stop OVS ${TOOLS_SYSTEM_IP}
Wait Until Keyword Succeeds 2min 20 sec Verify Tunnel Down
OVSDB.Start OVS ${TOOLS_SYSTEM_IP}
- Wait Until Keyword Succeeds 2min 20 sec Genius.Verify Tunnel Status as UP TZA
+ Wait Until Keyword Succeeds 2min 20 sec Genius.Verify Tunnel Status As Up
Verify Tunnel Down
[Documentation] In this we will check whether tunnel is in down or not
- ${output}= KarafKeywords.Issue Command On Karaf Console ${TEP_SHOW_STATE}
+ ${output}= KarafKeywords.Issue_Command_On_Karaf_Console ${TEP_SHOW_STATE}
Should Contain ${output} DOWN
-Get Port Number
- [Arguments] ${connection_id} ${Bridgename} ${tunnel}
- [Documentation] In this we get Port Number to check table0 entry for 2 Dpn
- Switch Connection ${connection_id}
- ${check-1} Execute Command sudo ovs-ofctl -O OpenFlow13 show ${Bridgename}
- Log ${check-1}
- ${lines} Get Lines Containing String ${check-1} ${tunnel}
- Log ${lines}
- ${port} Get Regexp Matches ${lines} \\d+
- ${port_num} Get From List ${port} 0
- Should Contain ${check-1} ${port_num}
- [Return] ${port_num}
-
Disable_Tunnel_Monitoring
[Documentation] In this we will disable tunnel monitoring by tep:enable command running in karaf console
- ${output} Issue_Command_On_Karaf_Console tep:enable-tunnel-monitor false
+ Issue_Command_On_Karaf_Console tep:enable-tunnel-monitor false
Verify Tunnels By Enabling BFD
[Documentation] Verify tunnel creation by enabling BFD monitoring.
- ${result} Run Keyword And Return Status Verify Tunnel Monitoring is on
+ ${result} Run Keyword And Return Status Genius.Verify Tunnel Monitoring Status ${TUNNEL_MONITOR_ON}
Run Keyword If '${result}' == 'False' Enable_Tunnel_monitoring
- Verify Tunnel State After OVS Restart ${TOOLS_SYSTEM_IP}
- Verify Tunnel State After OVS Restart ${TOOLS_SYSTEM_2_IP}
+ : FOR ${tools_ip} IN @{TOOLS_SYSTEM_ALL_IPS}
+ \ Verify Tunnel State After OVS Restart ${tools_ip}
Verify Tunnels By Disabling BFD
[Documentation] Verify tunnel creation by disabling BFD monitoring.
- ${result} = Run Keyword And Return Status Verify Tunnel Monitoring is on
+ ${result} = Run Keyword And Return Status Genius.Verify Tunnel Monitoring Status ${TUNNEL_MONITOR_ON}
Run Keyword If '${result}' == 'True' Disable_Tunnel_Monitoring
- ${tunnels_on_OVS} = Genius.Get Tunnels On OVS ${conn_id_1}
+ ${tunnels_on_OVS} = Genius.Get Tunnels On OVS ${TOOLS_SYSTEM_ALL_CONN_IDS[0]}
OVSDB.Stop OVS ${TOOLS_SYSTEM_IP}
- Genius.Verify Tunnel Status ${tunnels_on_OVS} UNKNOWN
+ Genius.Verify Tunnel Status UNKNOWN ${tunnels_on_OVS}
OVSDB.Start OVS ${TOOLS_SYSTEM_IP}
- Wait Until Keyword Succeeds 20 2 Genius.Verify Tunnel Status as UP TZA
+ Wait Until Keyword Succeeds 10s 1s Genius.Verify Tunnel Status As Up
Code Review / integration / test.git / blobdiff