Documentation This test suite is to by-pass interface manager and create/delete the tunnels between the switches directly inorder for ITM to scale and build mesh among more number of switches.
Suite Setup ITM Direct Tunnels Start Suite
Suite Teardown ITM Direct Tunnels Stop Suite
-Test Teardown Get Model Dump ${ODL_SYSTEM_IP} ${data_models}
+Test Setup Genius Test Setup
+Test Teardown Genius Test Teardown ${data_models}
Library OperatingSystem
Library String
Library RequestsLibrary
Resource ../../libraries/KarafKeywords.robot
Resource ../../libraries/Utils.robot
Resource ../../libraries/Genius.robot
+Resource ../../variables/netvirt/Variables.robot
Resource ../../variables/Variables.robot
Resource ../../libraries/OVSDB.robot
*** Variables ***
+@{PORT} BR1-eth1 BR2-eth1
+${VLAN} 0
*** Test Cases ***
Create and Verify VTEP
[Documentation] This testcase creates a Internal Transport Manager - ITM tunnel between 2 DPNs
${Dpn_id_1} Genius.Get Dpn Ids ${conn_id_1}
${Dpn_id_2} Genius.Get Dpn Ids ${conn_id_2}
- ${vlan}= Set Variable 0
${gateway-ip}= Set Variable 0.0.0.0
- Genius.Create Vteps ${Dpn_id_1} ${Dpn_id_2} ${TOOLS_SYSTEM_IP} ${TOOLS_SYSTEM_2_IP} ${vlan} ${gateway-ip}
- Wait Until Keyword Succeeds 40 10 Get ITM ${itm_created[0]} ${subnet} ${vlan}
+ Genius.Create Vteps ${Dpn_id_1} ${Dpn_id_2} ${TOOLS_SYSTEM_IP} ${TOOLS_SYSTEM_2_IP} ${VLAN} ${gateway-ip}
+ Wait Until Keyword Succeeds 40 10 Get ITM ${itm_created[0]} ${subnet} ${VLAN}
... ${Dpn_id_1} ${TOOLS_SYSTEM_IP} ${Dpn_id_2} ${TOOLS_SYSTEM_2_IP}
${type} Set Variable odl-interface:tunnel-type-vxlan
${tunnel-1} Wait Until Keyword Succeeds 40 20 Get_Tunnel ${Dpn_id_1} ${Dpn_id_2}
${check-4} Wait Until Keyword Succeeds 40 10 Genius.Check Table0 Entry For 2 Dpn ${conn_id_2} ${Bridge-2}
... ${Port_num2}
+Verify VTEP After Restarting OVS
+ [Documentation] Verify Testcase, Verifying tunnel state by restarting OVS
+ Wait Until Keyword Succeeds 20 2 Genius.Verify Tunnel Status as UP TZA
+ OVSDB.Restart OVSDB ${TOOLS_SYSTEM_IP}
+ Wait Until Keyword Succeeds 20 2 Genius.Verify Tunnel Status as UP TZA
+
+Verify VTEP After Restarting Controller
+ [Documentation] Verify Testcase, Verifying tunnel state by restarting CONTROLLER
+ Genius.Verify Tunnel Status as UP TZA
+ ClusterManagement.Stop_Members_From_List_Or_All
+ ClusterManagement.Start_Members_From_List_Or_All
+ Wait Until Keyword Succeeds 60 3 ClusterManagement.Check Status Of Services Is OPERATIONAL
+ Wait Until Keyword Succeeds 30 3 Genius.Verify Tunnel Status as UP TZA
+
+Verify Tunnels By Disabling BFD
+ [Documentation] This test case will verify tunnels after disabling BFD and verifies tunnel status as unknown after stopping OVS.
+ ${result} = Run Keyword And Return Status Verify Tunnel Monitoring is on
+ Run Keyword If '${result}' == 'True' Disable_Tunnel_Monitoring
+ ${tunnels_on_OVS} = Genius.Get Tunnels On OVS ${conn_id_1}
+ OVSDB.Stop OVS ${TOOLS_SYSTEM_IP}
+ Genius.Verify Tunnel Status ${tunnels_on_OVS} UNKNOWN
+ OVSDB.Start OVS ${TOOLS_SYSTEM_IP}
+ Wait Until Keyword Succeeds 20 2 Genius.Verify Tunnel Status as UP TZA
+
Verify Tunnels By Enabling BFD
[Documentation] This test case will check the tunnel exists by bringing up/down a switch and check tunnels exist by enabling BFD
${result} Run Keyword And Return Status Verify Tunnel Monitoring is on
Run Keyword If '${result}' == 'False' Enable_Tunnel_monitoring
- Verify Tunnel State ${TOOLS_SYSTEM_1_IP}
- Verify Tunnel State ${TOOLS_SYSTEM_2_IP}
+ Verify Tunnel State After OVS Restart ${TOOLS_SYSTEM_IP}
+ Verify Tunnel State After OVS Restart ${TOOLS_SYSTEM_2_IP}
Delete and Verify VTEP
[Documentation] This Delete testcase , deletes the ITM tunnel created between 2 dpns.
${Dpn_id_2} Genius.Get Dpn Ids ${conn_id_2}
${tunnel-1} Get_Tunnel ${Dpn_id_1} ${Dpn_id_2}
${tunnel-2} Get_Tunnel ${Dpn_id_2} ${Dpn_id_1}
- Remove All Elements At URI And Verify ${CONFIG_API}/itm:transport-zones/transport-zone/${itm_created[0]}/
+ ${cmd1} Set Variable tep:delete ${Dpn_id_1} @{PORT}[0] ${VLAN} ${TOOLS_SYSTEM_IP} ${subnet}/24 null ${itm_created[0]}
+ ${cmd2} Set Variable tep:delete ${Dpn_id_2} @{PORT}[1] ${VLAN} ${TOOLS_SYSTEM_2_IP} ${subnet}/24 null ${itm_created[0]}
+ KarafKeywords.Issue Command On Karaf Console ${cmd1}
+ KarafKeywords.Issue Command On Karaf Console tep:commit
+ KarafKeywords.Issue Command On Karaf Console ${cmd2}
+ KarafKeywords.Issue Command On Karaf Console tep:commit
+ ${output} KarafKeywords.Issue Command On Karaf Console ${TEP_SHOW}
+ BuiltIn.Should Not Contain ${output} ${itm_created[0]}
+ BuiltIn.Run Keyword And Ignore Error Remove All Elements At URI And Verify ${CONFIG_API}/itm:transport-zones/transport-zone/${itm_created[0]}/
${resp} RequestsLibrary.Get Request session ${OPERATIONAL_API}/itm-state:tunnels_state/
Should Not Contain ${resp} ${tunnel-1} ${tunnel-2}
${Ovs-del-1} Wait Until Keyword Succeeds 40 10 Genius.Check Tunnel Delete On OVS ${conn_id_1} ${tunnel-1}
${Ovs-del-2} Wait Until Keyword Succeeds 40 10 Genius.Check Tunnel Delete On OVS ${conn_id_2} ${tunnel-2}
+ ${resp} RequestsLibrary.Get Request session ${OPERATIONAL_API}/itm:not-hosted-transport-zones/
+ ${respjson} RequestsLibrary.To Json ${resp.content} pretty_print=True
+ Log ${respjson}
+ BuiltIn.Should Not Contain ${resp.content} ${itm_created[0]}
*** Keywords ***
Get_Tunnel
[Documentation] In this we will enable tunnel monitoring by tep:enable command running in karaf console
${output} Issue_Command_On_Karaf_Console tep:enable-tunnel-monitor true
-Verify Tunnel State
+Verify Tunnel State After OVS Restart
[Arguments] ${TOOLS_SYSTEM_IP}
[Documentation] In this we will Verify Tunnel State by Stopping/Starting Switch
- OVSDB.Stop OVSDB ${TOOLS_SYSTEM_IP}
+ OVSDB.Stop OVS ${TOOLS_SYSTEM_IP}
Wait Until Keyword Succeeds 2min 20 sec Verify Tunnel Down
- OVSDB.Start OVSDB ${TOOLS_SYSTEM_IP}
- Wait Until Keyword Succeeds 2min 20 sec Verify Tunnel Status as UP
+ OVSDB.Start OVS ${TOOLS_SYSTEM_IP}
+ Wait Until Keyword Succeeds 2min 20 sec Genius.Verify Tunnel Status as UP TZA
Verify Tunnel Down
[Documentation] In this we will check whether tunnel is in down or not
- ${output}= Issue Command On Karaf Console ${TEP_SHOW_STATE}
+ ${output}= KarafKeywords.Issue Command On Karaf Console ${TEP_SHOW_STATE}
Should Contain ${output} DOWN
Get Port Number
${port_num} Get From List ${port} 0
Should Contain ${check-1} ${port_num}
[Return] ${port_num}
+
+Disable_Tunnel_Monitoring
+ [Documentation] In this we will disable tunnel monitoring by tep:enable command running in karaf console
+ ${output} Issue_Command_On_Karaf_Console tep:enable-tunnel-monitor false
Code Review / integration / test.git / blobdiff