Documentation This test suite is to by-pass interface manager and create/delete the tunnels between the switches directly inorder for ITM to scale and build mesh among more number of switches.
Suite Setup ITM Direct Tunnels Start Suite
Suite Teardown ITM Direct Tunnels Stop Suite
+Test Setup Genius Test Setup
Test Teardown Genius Test Teardown ${data_models}
Library OperatingSystem
Library String
Resource ../../libraries/KarafKeywords.robot
Resource ../../libraries/Utils.robot
Resource ../../libraries/Genius.robot
+Resource ../../variables/netvirt/Variables.robot
Resource ../../variables/Variables.robot
Resource ../../libraries/OVSDB.robot
*** Variables ***
+${VLAN} 0
*** Test Cases ***
Create and Verify VTEP
[Documentation] This testcase creates a Internal Transport Manager - ITM tunnel between 2 DPNs
${Dpn_id_1} Genius.Get Dpn Ids ${conn_id_1}
${Dpn_id_2} Genius.Get Dpn Ids ${conn_id_2}
- ${vlan}= Set Variable 0
${gateway-ip}= Set Variable 0.0.0.0
- Genius.Create Vteps ${Dpn_id_1} ${Dpn_id_2} ${TOOLS_SYSTEM_IP} ${TOOLS_SYSTEM_2_IP} ${vlan} ${gateway-ip}
- Wait Until Keyword Succeeds 40 10 Get ITM ${itm_created[0]} ${subnet} ${vlan}
+ Genius.Create Vteps ${Dpn_id_1} ${Dpn_id_2} ${TOOLS_SYSTEM_IP} ${TOOLS_SYSTEM_2_IP} ${VLAN} ${gateway-ip}
+ Wait Until Keyword Succeeds 40 10 Get ITM ${itm_created[0]} ${subnet} ${VLAN}
... ${Dpn_id_1} ${TOOLS_SYSTEM_IP} ${Dpn_id_2} ${TOOLS_SYSTEM_2_IP}
${type} Set Variable odl-interface:tunnel-type-vxlan
${tunnel-1} Wait Until Keyword Succeeds 40 20 Get_Tunnel ${Dpn_id_1} ${Dpn_id_2}
Should Be Equal As Strings ${resp.status_code} 200
Should Contain ${resp.content} ${Dpn_id_1} ${tunnel-1}
Should Contain ${resp.content} ${Dpn_id_2} ${tunnel-2}
- ${Port_num1} Get Port Number ${conn_id_1} ${Bridge-1} ${tunnel-1}
- ${Port_num2} Get Port Number ${conn_id_2} ${Bridge-2} ${tunnel-2}
- ${check-3} Wait Until Keyword Succeeds 40 10 Genius.Check Table0 Entry For 2 Dpn ${conn_id_1} ${Bridge-1}
+ ${Port_num1} Get Port Number ${conn_id_1} ${Bridge} ${tunnel-1}
+ ${Port_num2} Get Port Number ${conn_id_2} ${Bridge} ${tunnel-2}
+ ${check-3} Wait Until Keyword Succeeds 40 10 Genius.Check Table0 Entry For 2 Dpn ${conn_id_1} ${Bridge}
... ${Port_num1}
- ${check-4} Wait Until Keyword Succeeds 40 10 Genius.Check Table0 Entry For 2 Dpn ${conn_id_2} ${Bridge-2}
+ ${check-4} Wait Until Keyword Succeeds 40 10 Genius.Check Table0 Entry For 2 Dpn ${conn_id_2} ${Bridge}
... ${Port_num2}
Verify VTEP After Restarting OVS
[Documentation] Verify Testcase, Verifying tunnel state by restarting OVS
- Genius.Verify Tunnel Status as UP TZA
+ Wait Until Keyword Succeeds 20 2 Genius.Verify Tunnel Status as UP TZA
OVSDB.Restart OVSDB ${TOOLS_SYSTEM_IP}
- Wait Until Keyword Succeeds 30 3 Genius.Verify Tunnel Status as UP TZA
+ Wait Until Keyword Succeeds 20 2 Genius.Verify Tunnel Status as UP TZA
Verify VTEP After Restarting Controller
[Documentation] Verify Testcase, Verifying tunnel state by restarting CONTROLLER
Genius.Verify Tunnel Status as UP TZA
ClusterManagement.Stop_Members_From_List_Or_All
ClusterManagement.Start_Members_From_List_Or_All
- Wait Until Keyword Succeeds 60 3 Genius.Check System Status
+ Wait Until Keyword Succeeds 60 3 ClusterManagement.Check Status Of Services Is OPERATIONAL @{GENIUS_DIAG_SERVICES}
Wait Until Keyword Succeeds 30 3 Genius.Verify Tunnel Status as UP TZA
-Verify Tunnels By Disabling BFD
- [Documentation] This test case will verify tunnels after disabling BFD and verifies tunnel status as unknown after stopping OVS.
- ${result} = Run Keyword And Return Status Verify Tunnel Monitoring is on
- Run Keyword If '${result}' == 'True' Disable_Tunnel_Monitoring
- ${tunnels_on_OVS} = Genius.Get Tunnels On OVS ${conn_id_1}
- OVSDB.Stop OVS ${TOOLS_SYSTEM_IP}
- Genius.Verify Tunnel Status ${tunnels_on_OVS} UNKNOWN
- OVSDB.Start OVS ${TOOLS_SYSTEM_IP}
- Genius.Verify Tunnel Status as UP TZA
-
-Verify Tunnels By Enabling BFD
- [Documentation] This test case will check the tunnel exists by bringing up/down a switch and check tunnels exist by enabling BFD
- ${result} Run Keyword And Return Status Verify Tunnel Monitoring is on
- Run Keyword If '${result}' == 'False' Enable_Tunnel_monitoring
- Verify Tunnel State After OVS Restart ${TOOLS_SYSTEM_IP}
- Verify Tunnel State After OVS Restart ${TOOLS_SYSTEM_2_IP}
+Verify Tunnels By Enabling/Disabling BFD
+ [Documentation] Verify tunnel creation by enabling and disabling BFD one after another with respect to the branch in such a way default value is retained at last.
+ CompareStream.Run_Keyword_If_At_Least_Neon Verify Tunnels By Enabling BFD
+ CompareStream.Run_Keyword_If_At_Least_Neon Verify Tunnels By Disabling BFD
+ CompareStream.Run_Keyword_If_Less_Than_Neon Verify Tunnels By Disabling BFD
+ CompareStream.Run_Keyword_If_Less_Than_Neon Verify Tunnels By Enabling BFD
Delete and Verify VTEP
[Documentation] This Delete testcase , deletes the ITM tunnel created between 2 dpns.
${Dpn_id_2} Genius.Get Dpn Ids ${conn_id_2}
${tunnel-1} Get_Tunnel ${Dpn_id_1} ${Dpn_id_2}
${tunnel-2} Get_Tunnel ${Dpn_id_2} ${Dpn_id_1}
+ Remove All Elements At URI And Verify ${CONFIG_API}/itm:transport-zones/transport-zone/${itm_created[0]}/subnets/${subnet}%2F24/vteps/${Dpn_id_1}/${port_name}
+ Remove All Elements At URI And Verify ${CONFIG_API}/itm:transport-zones/transport-zone/${itm_created[0]}/subnets/${subnet}%2F24/vteps/${Dpn_id_2}/${port_name}
+ ${output} KarafKeywords.Issue Command On Karaf Console ${TEP_SHOW}
+ BuiltIn.Should Not Contain ${output} ${itm_created[0]}
Remove All Elements At URI And Verify ${CONFIG_API}/itm:transport-zones/transport-zone/${itm_created[0]}/
- ${resp} RequestsLibrary.Get Request session ${OPERATIONAL_API}/itm-state:tunnels_state/
- Should Not Contain ${resp} ${tunnel-1} ${tunnel-2}
+ ${resp} Utils.Get Data From URI session ${CONFIG_API}/itm:transport-zones/
+ BuiltIn.Should Not Contain ${resp} ${itm_created[0]}
${Ovs-del-1} Wait Until Keyword Succeeds 40 10 Genius.Check Tunnel Delete On OVS ${conn_id_1} ${tunnel-1}
${Ovs-del-2} Wait Until Keyword Succeeds 40 10 Genius.Check Tunnel Delete On OVS ${conn_id_2} ${tunnel-2}
Verify Tunnel Down
[Documentation] In this we will check whether tunnel is in down or not
- ${output}= Issue Command On Karaf Console ${TEP_SHOW_STATE}
+ ${output}= KarafKeywords.Issue Command On Karaf Console ${TEP_SHOW_STATE}
Should Contain ${output} DOWN
Get Port Number
Disable_Tunnel_Monitoring
[Documentation] In this we will disable tunnel monitoring by tep:enable command running in karaf console
${output} Issue_Command_On_Karaf_Console tep:enable-tunnel-monitor false
+
+Verify Tunnels By Enabling BFD
+ [Documentation] Verify tunnel creation by enabling BFD monitoring.
+ ${result} Run Keyword And Return Status Verify Tunnel Monitoring is on
+ Run Keyword If '${result}' == 'False' Enable_Tunnel_monitoring
+ Verify Tunnel State After OVS Restart ${TOOLS_SYSTEM_IP}
+ Verify Tunnel State After OVS Restart ${TOOLS_SYSTEM_2_IP}
+
+Verify Tunnels By Disabling BFD
+ [Documentation] Verify tunnel creation by disabling BFD monitoring.
+ ${result} = Run Keyword And Return Status Verify Tunnel Monitoring is on
+ Run Keyword If '${result}' == 'True' Disable_Tunnel_Monitoring
+ ${tunnels_on_OVS} = Genius.Get Tunnels On OVS ${conn_id_1}
+ OVSDB.Stop OVS ${TOOLS_SYSTEM_IP}
+ Genius.Verify Tunnel Status ${tunnels_on_OVS} UNKNOWN
+ OVSDB.Start OVS ${TOOLS_SYSTEM_IP}
+ Wait Until Keyword Succeeds 20 2 Genius.Verify Tunnel Status as UP TZA
Code Review / integration / test.git / blobdiff